インジケーター
Multitimeframe
Smart Indicator 06/24/2026
The indicators read levels. That is pretty basic. Never trade under three out of ten. The chart tell you when it confirms.
インジケーター
8 SMA Bands (Points) Auction [MTF]8 SMA Bands (Points) Auction is a multi-timeframe overlay indicator that plots 8 different Simple Moving Averages (default length 2048) from a higher timeframe, along with symmetric point-based bands around each MA.It creates a layered "auction zone" system using a base point offset (default 0.2441405 — Gann-inspired) multiplied from 1× to 8×. These bands are not percentage or ATR-based, but fixed price points, making them geometrically proportional in absolute price distance.
The bands are grouped into 5 visual "Auction" levels:
Low Auction (Level 1)
Normal Auction (Level 2)
High Auction (Level 4)
Very High Auction (Level 6)
Extreme Auction (Level 8)
It also highlights one MA as "FV" (Fair Value).
Key Features: Higher Timeframe MTF (default Daily)
Individual length and fine-tune adjustment for each of the 8 MAs
Master base offset control (easy to switch between Gann / Murrey Math styles)
Clean right-side labels for each auction level
Primary Use Cases:
1. Auction / Market Profile Style Trading
Visualizes different "auction intensities" or value areas.
Price moving into High/Very High/Extreme Auction zones often signals over-extension or potential reversal.
Normal Auction area acts as a fair value / equilibrium zone.
2. Dynamic Support & Resistance
The bands serve as layered S/R levels, especially powerful when using Daily or Weekly MAs on lower timeframes (e.g., 15m, 1H, 4H).
3. Fair Value Trading
The central MA (labeled FV) is used as a mean-reversion magnet.
Traders look for entries toward FV from outer auction zones.
4. Trend Strength & Exhaustion
When price sustains in Extreme Auction territory → strong trend.
Rejection or failure to hold outer bands → possible exhaustion.
5. Institutional / Smart Money Concepts
Helps identify premium and discount zones relative to higher-timeframe fair value.
Best Suited For:
Futures, Forex, and large-cap stocks
Swing and intraday traders who like higher-timeframe bias
Traders familiar with Gann, Murrey Math, or Auction Market Theory
This indicator is particularly useful for context — giving you a clear visual map of how far price has extended from fair value on multiple levels simultaneously.
インジケーター
Session Liquidity KillzonesSession Liquidity Killzones
Session Liquidity Killzones is a session-based liquidity and sweep indicator by ImtiyazAli73, designed for intraday traders who track Asia, London, and New York killzones.
The script marks each session range, extends completed session highs/lows, detects when later sessions sweep prior session liquidity, and highlights post-sweep expansion candles. It is built as a decision-support tool, not as a guaranteed buy/sell signal system.
What It Shows
Asia, London, and New York killzone boxes.
Completed session high, low, and optional midpoint levels.
London sweeps of Asia high/low.
New York sweeps of London high/low.
Optional New York sweeps of Asia high/low.
Compact sweep markers, with optional text labels.
One-shot bullish and bearish post-sweep expansion markers.
Optional compressed session range markers.
Dashboard showing current session, latest range readings, sweep state, compression state, and latest expansion bias.
How It Works
The indicator tracks each configured session using the selected timezone. When a session starts, the script begins building that session's high/low range. When the session ends, the completed high, low, and midpoint can be extended forward as reference liquidity levels.
Sweep detection compares the current killzone against completed prior session levels:
London can sweep the Asia high or low.
New York can sweep the London high or low.
New York can also sweep Asia levels if that option is enabled.
Sweep confirmation can use either wick touch logic or stricter close-back-inside logic. After a sweep, the script watches for displacement candles within the selected expansion window.
Main Settings
Session Timezone controls how the Asia, London, and New York session windows are interpreted.
Asia Killzone, London Killzone, and New York Killzone define the exact session windows.
Sweep Confirmation controls whether a sweep requires price to close back inside the swept level or only touch it with a wick.
Expansion Window After Sweep controls how many bars after a sweep are eligible for post-sweep expansion detection.
Displacement Candle ATR controls how large the expansion candle must be relative to ATR.
Require Volume Expansion optionally filters expansion signals using volume relative to a moving average baseline.
Compressed Session Max ATR marks session ranges that end below the selected ATR multiple.
Completed Sessions To Keep controls how much history remains on the chart. The default is intentionally low to keep price action readable.
Show Sweep Marker Text can be enabled when you want detailed labels, but the default compact marker mode keeps the chart cleaner.
Show Session Midlines and Show Compression Markers are optional visual layers and are disabled by default for readability.
Alerts
The indicator includes alerts for:
Asia killzone start.
London killzone start.
New York killzone start.
Buy-side session liquidity sweep.
Sell-side session liquidity sweep.
Bullish post-sweep expansion.
Bearish post-sweep expansion.
Compressed killzone range.
How To Use
Use the session boxes to understand where each killzone created its high and low. Watch later sessions for sweeps of prior highs/lows, then check whether the market expands away from the swept level.
A sell-side sweep followed by bullish expansion can suggest upside displacement after liquidity was taken. A buy-side sweep followed by bearish expansion can suggest downside displacement after liquidity was taken.
The dashboard is intended to summarize session state quickly, but all signals should be interpreted with market context, risk management, and independent analysis.
Originality
This script combines configurable killzone tracking, prior-session liquidity levels, sweep confirmation modes, ATR-based expansion detection, optional volume expansion filtering, compression readings, and a compact dashboard into a single original session-liquidity workflow.
Disclaimer
This script is for educational and informational purposes only. Trading involves risk. Always do your own analysis before taking any trade.
インジケーター
9/21/200 EMAThis indicator plots the 9, 21, and 200 Exponential Moving Averages (EMAs) directly on your chart. The 9 and 21 EMAs track short-term momentum, while the 200 EMA serves as a long-term trend filter.
A compact table in the top right displays each EMA's current value at a glance, so you always know where the levels are regardless of how close the lines are to each other.
インジケーター
Prior Day Dealing Range [M1D]Frames the previous day's range as an ICT dealing range — high, low, equilibrium, quartiles, and premium/discount extreme zones — with a session-selectable day boundary, sweep mitigation, and a live bias table.
WHAT IT DOES
This indicator plots the prior trading day's range and frames it the way an ICT trader reads a dealing range, rather than as three disconnected lines:
• PDH / PDL — previous day high and low
• PDEQ — equilibrium (the 0.5 midpoint of the prior range)
• 0.25 / 0.75 quartiles — the boundaries that split the range into premium, equilibrium and discount
• Premium & discount extreme zones — the top quartile (0.75→1.0) and bottom quartile (0.0→0.25) shaded as the areas where price most often reacts
All levels and zones share a single left anchor at the day's open, so they read as one stacked range projecting into the current session.
WHY A DEALING RANGE INSTEAD OF JUST PDH/PDL
Equilibrium tells you whether price is trading at a premium (above 0.5) or a discount (below 0.5); the quartile zones mark the extremes where reversions and sweeps tend to cluster. The bias table reduces that to a single read.
SESSION-ANCHORED DAY OPEN
The "day" can be anchored to Exchange (the chart's native daily boundary, works on all timeframes), or to NY Midnight / 8:30 NY / 9:30 NY. The NY options reset the range on the open that matters to your model and are intended for intraday charts (roughly 30m and below); Exchange is the safe default for any timeframe.
MITIGATION
When a confirmed bar sweeps PDH or PDL, that line fades to a dotted "mitigated" style and its label updates. This is sweep awareness only, evaluated on bar close (no intrabar repaint).
BIAS TABLE
Shows the PDEQ price, which zone price currently sits in (Premium / Discount, with an "extreme" flag in a quartile zone), and the exact position of price within the prior range as a percentage.
ALERTS
Cross above / below PDEQ, entry into the premium / discount extreme zone, and PDH / PDL swept.
HOW TO USE
1. Pick your day anchor — Exchange for a standard daily range, or an NY session open if your model resets there.
2. Read bias from PDEQ: above = premium (favor shorts), below = discount (favor longs).
3. Watch the extreme zones and PDH/PDL for sweeps; the mitigation styling flags when a level has been run.
4. Toggle any element (zones, quartiles, labels, table) off in settings to suit your chart.
NOTES / LIMITATIONS
• Levels are confirmed on the close of each day and held for the following session; they do not repaint.
• NY-anchored modes assume the session window aligns to a bar boundary, so they are best on intraday timeframes; on higher timeframes use Exchange.
• This is a contextual / discretionary tool — it marks levels and bias, it does not generate buy/sell signals.
The previous-day high/low/equilibrium calculation is standard; this script's contribution is the combination — a session-selectable day boundary, the full quartile dealing-range framing with premium/discount extreme zones, sweep mitigation, and a range-position bias table in one tool. All code is original and written in Pine Script v6.
インジケーター
Dynamic Pivot Levels ProOverview
Dynamic Pivot Levels Pro is a price-action-based support and resistance indicator that automatically plots key pivot zones and reaction levels to help traders identify potential reversal, breakout, and profit-taking areas.
Unlike traditional pivot indicators, this tool focuses on significant market swings and recent structure to provide cleaner and more relevant trading levels.
Features
Automatic Pivot High & Pivot Low Detection
Dynamic Support & Resistance Levels
Breakout and Rejection Monitoring
Clean Chart Visualization
Non-Repainting Pivot Confirmation
Suitable for Scalping, Day Trading, and Swing Trading
How It Works
Pivot High
A Pivot High is confirmed when price forms a significant swing high and surrounding candles validate the structure.
Pivot Low
A Pivot Low is confirmed when price forms a significant swing low and surrounding candles validate the structure.
Support Levels
Recent Pivot Lows are projected as support zones where buyers may become active.
Resistance Levels
Recent Pivot Highs are projected as resistance zones where sellers may become active.
Trading Applications
Reversal Trading
Look for bullish reactions near support pivots and bearish reactions near resistance pivots.
Breakout Trading
When price closes above a resistance pivot or below a support pivot, it may indicate a continuation move.
Take Profit Planning
Pivot levels can serve as natural targets for profit-taking and trade management.
Best Markets
* Forex
* Cryptocurrency
* Stocks
* Indices
* Futures
Recommended Timeframes
* 1M – 5M for scalping
* 15M – 1H for intraday trading
* 4H – Daily for swing trading
Key Advantages
* No future-looking calculations
* Non-repainting pivot confirmation
* Adapts to changing market structure
* Easy-to-read support and resistance framework
Disclaimer
This indicator is intended for educational and analytical purposes only. Always use proper risk management and confirm signals with your own trading plan.
インジケーター
EMA + VWAP + Bollinger Bands Combo# EMA + VWAP + Bollinger Bands Combo
This indicator combines three of the most popular technical analysis tools into a single customizable overlay: Exponential Moving Average (EMA), Volume Weighted Average Price (VWAP), and Bollinger Bands.
Instead of adding multiple indicators to your chart, you can manage all three from a single script and enable only the tools you need.
### Features
✅ **Exponential Moving Average (EMA)**
* Customizable length and source
* Optional display toggle
* Useful for identifying trend direction and dynamic support/resistance
✅ **Volume Weighted Average Price (VWAP)**
* Supports Session, Weekly, Monthly, Quarterly, and Yearly anchors
* Optional VWAP deviation bands
* Useful for institutional price analysis and intraday trend confirmation
✅ **Bollinger Bands**
* Customizable length and standard deviation settings
* Supports SMA, EMA, RMA (SMMA), WMA, and VWMA as the basis
* Useful for volatility analysis, breakout detection, and mean-reversion setups
### Display Combinations
The indicator allows any combination of:
* EMA only
* VWAP only
* Bollinger Bands only
* EMA + VWAP
* EMA + Bollinger Bands
* VWAP + Bollinger Bands
* EMA + VWAP + Bollinger Bands
### How Traders Commonly Use It
**Trend Following**
* Price above EMA and VWAP can indicate bullish conditions.
* Price below EMA and VWAP can indicate bearish conditions.
**Intraday Trading**
* VWAP acts as a key institutional reference level.
* VWAP bands can help identify stretched price conditions.
**Volatility Analysis**
* Bollinger Band expansion may indicate increasing volatility.
* Bollinger Band contraction may indicate potential breakout conditions.
**Confluence Zones**
* Areas where EMA, VWAP, and Bollinger Bands align can provide stronger support and resistance levels.
### Notes
This indicator is designed as a convenience tool that combines multiple commonly used overlays into a single script, helping reduce chart clutter while maintaining flexibility and customization.
インジケーター
Scalp Pro Signals [Jos-ProTrader]Overview
Scalp Pro Signals is a non-repainting scalping indicator designed to help traders identify high-probability intraday entries using trend, momentum, and price-location confirmation.
The indicator combines:
* EMA Trend Analysis
* RSI Momentum Filter
* VWAP Confirmation
* Bullish/Bearish Candle Validation
The goal is to reduce low-quality signals and keep traders aligned with the prevailing market direction.
How It Works
Buy Conditions
A BUY signal is generated when:
* Fast EMA is above Slow EMA
* RSI is above 55
* Price closes above VWAP
* The candle closes bullish
Sell Conditions
A SELL signal is generated when:
* Fast EMA is below Slow EMA
* RSI is below 45
* Price closes below VWAP
* The candle closes bearish
Signals are confirmed only after candle close to avoid repainting.
Features
*Non-Repainting Signals
*Buy & Sell Alerts
*Trend Identification Using EMAs
*Momentum Confirmation with RSI
*VWAP-Based Price Validation
*Works on Forex, Crypto, Stocks, and Indices
Recommended Timeframes
* 1 Minute
* 3 Minutes
* 5 Minutes
* 15 Minutes
For best results, use the indicator during active market sessions with strong volume and volatility.
Risk Management
This indicator is designed as a trade-assistance tool and should not be used as a standalone trading system. Always combine signals with proper risk management, stop-loss placement, and overall market analysis.
Disclaimer
This indicator provides technical analysis signals based on historical price data and does not guarantee future performance. Trading involves risk, and users should perform their own due diligence before making trading decisions.
インジケーター
Daily Key LevelsDaily Key Levels marks important New York-session opening prices directly on the chart, helping intraday traders keep the current session’s main reference levels visible without carrying old historical lines forward.
The indicator captures each level from 1-minute data and projects it across the active session only. The session resets at 18:00 New York time, matching the common futures session structure.
Key Features
Marks the 18:00 market open, 8:30 news level, 9:30 New York open, and 10:00 macro level.
Optional 4-hour opening prices: 18:00, 22:00, 02:00, 06:00, 10:00, and 14:00.
Optional 6-hour opening prices: 18:00, 00:00, 06:00, and 12:00.
Automatically avoids duplicate stacked lines when the same timestamp belongs to multiple groups.
Only displays levels for the current active session.
Overlap Logic
When multiple level groups share the same timestamp, the indicator uses a clean priority rule:
Dedicated key levels > 4-hour opens > 6-hour opens
For example, the standalone 18:00 market-open level takes priority over both 4H and 6H 18:00 levels. The standalone 10:00 macro level takes priority over the 4H 10:00 level.
Notes
This indicator is designed as a visual reference tool for intraday context, planning, and level awareness. It does not generate trade signals, entries, exits, or alerts. Level accuracy depends on the chart symbol’s available 1-minute data and TradingView’s session/feed data.
インジケーター
5 Advanced MAs MTF🔵 OVERVIEW
5 Advanced MAs MTF is a professional moving averages indicator designed for traders who need to see multiple trend layers on a single chart simultaneously, each one with its own independent configuration and — above all — its own timeframe.
Unlike typical "ribbon" or "multi-MA" indicators on the market, which display several averages all computed on the active chart's timeframe, this indicator allows each of the 5 averages to have its own timeframe. You can have your EMA 8 on the 15-minute chart, your EMA 20 on the 1-hour, your EMA 50 on the 4-hour, and your SMA 200 on the daily, all plotted on the same 15-minute chart. That turns the indicator into a complete multi-timeframe control panel without needing to open four separate charts or saturate your installed indicators list.
🔶 KEY FEATURES
• 5 fully independent moving averages — each one configured separately and enabled or disabled individually.
• True multi-timeframe per MA — the core differentiator. Each MA can read its value from a higher, lower, or equal timeframe relative to the active chart. Leave it empty to use the chart's current timeframe.
• 9 moving average types — SMA, EMA, WMA, RMA, HMA, VWMA, TEMA, KAMA, and JMA. The last three (TEMA, KAMA, JMA) are implemented with their original formulas, no shortcuts. JMA uses Mark Jurik's standard defaults (Phase = 50, Power = 2).
• Configurable source per MA — Close, Open, High, Low, hl2, hlc3, ohlc4.
• Full visual styling per MA — color, width (1 to 10), and line style (solid, dashed, or dotted).
• Smart labels — each MA can show its label directly on the line, with configurable content (type, length, timeframe, or any combination of the three). Adjustable horizontal bar offset and text size.
• Interactive summary table — placed at any of the 9 chart anchors, displaying color column, type, length, timeframe, and price distance from each MA (in percentage and absolute value). Toggle to include or exclude hidden MAs.
• 22-alert system — 10 for Price↔MA crosses (bullish and bearish for each MA), 10 for MA↔MA crosses across 5 configurable slots (you pick which MA pairs to monitor), and 2 wildcard "any cross detected" alerts. All compatible with webhooks and automation.
• Works on any market and any timeframe — equities, futures, crypto, forex, commodities. From tick charts to monthly charts.
🔹 USE CASES BY TRADER STYLE
▪️ Day trader / scalper
Configure the first 3 MAs as short EMAs (8, 20, 50) on the chart's timeframe (5m or 15m) and leave MAs 4 and 5 as SMA 200 and VWMA 100 but reading them from a higher timeframe (1H, 4H, or daily). Result: you see your fast entry signals and the higher-timeframe bias at the same time without switching charts.
▪️ Swing trader
Recommended setup: EMA 20 and EMA 50 on the active chart (1H or 4H) + SMA 200 read from daily + VWMA 100 read from weekly. This lets you watch pullbacks against the EMA 20 on your operative timeframe with immediate confirmation that the higher-timeframe bias is aligned, plus the weekly VWMA as a volume-weighted "fair price" reference.
▪️ Position trader / long-term
Enable all 5 MAs on daily or weekly to build a complete structural map of the asset. The default configuration (EMA 8, EMA 20, EMA 50, SMA 200, and VWMA 100, all on daily) covers everything from fast momentum to the institutional level, combining pure-price references (SMA 200) with volume-weighted references (VWMA 100). The summary table shows the exact distance of price from each one.
▪️ Systematic crossover trader
The MA↔MA alert slots let you configure up to 5 specific crossovers simultaneously. Classic Golden Cross / Death Cross setup: Slot 1 with MA 3 (EMA 50) crossing MA 4 (SMA 200) on daily, with an automatic alert sent to your bot's webhook or notification system.
▪️ Multi-timeframe confluence trader
The most differentiating use case. Assign each MA to a different timeframe: MA 1 on 5m, MA 2 on 15m, MA 3 on 1H, MA 4 on 4H, MA 5 on daily or weekly. The summary table shows you in real time the distance of current price from the key level of each of those timeframes. When several MAs from different timeframes converge on the same price zone, that zone becomes a high-density structural level — one of the most-used concepts among institutional traders.
⚙️ INPUTS & CUSTOMIZATION
The entire indicator is 100% configurable from the Inputs panel. Each MA has its own expandable group with 14 controls. The summary table is also fully customizable (position, text size, background/border/text colors). The JMA global parameters (Phase and Power) live in their own section so advanced users can adjust them without cluttering the individual groups.
By default, all 5 MAs are enabled with a configuration tailored for daily and swing use: EMA 8 (blue, 1D), EMA 20 (red, 1D), EMA 50 (yellow, 1D), SMA 200 (green dashed, 1D), and VWMA 100 (pink dotted, 1D). The user can modify any of the parameters or reassign the MAs to other timeframes at any moment.
🔔 ALERTS
The indicator ships with 22 precompiled alerts ready to use:
• 5 alerts "Price crosses above MA N"
• 5 alerts "Price crosses below MA N"
• 10 alerts across 5 configurable slots for MA↔MA crossovers (bullish and bearish per slot)
• 2 wildcard alerts "any cross detected"
All messages include the {{ticker}} and {{close}} placeholders so they are directly parseable by webhooks, bots, and automation systems.
❓ FAQ
Does the indicator repaint?
No. The moving averages are computed on confirmed historical data. Cross alerts fire on the bar of the cross and values are not modified retroactively. To avoid signals that appear and disappear intra-bar, set the alerts to "Once per bar close".
Does it work on any timeframe?
Yes. From tick charts to monthly. In addition, each MA can have its own higher, lower, or equal timeframe relative to the active chart. The default timeframe is the current chart's timeframe.
Why 9 MA types?
Because each type behaves differently. SMA is the pure average; EMA weights recent bars more; HMA virtually eliminates lag; KAMA adapts to volatility; JMA is the smoothest while staying responsive; VWMA weights by volume. Having all of them available lets you use the right tool for each analysis without installing several separate indicators.
What are the 5 MA↔MA alert slots for?
They let you configure specific crossovers between any pair of MAs without having to create all possible combinations. In each slot you pick the fast MA and slow MA from dropdowns and receive alerts for the bullish and bearish crossovers of that pair. Example: Slot 1 = MA 3 crosses MA 4 (classic Golden Cross / Death Cross when MA 3 = EMA 50 and MA 4 = SMA 200).
What is the best MA combination?
There is no single "best" — it depends on the trading style and the asset. The Use Cases section above includes recommended configurations for the 5 most common profiles.
Is it compatible with webhooks and automation?
Yes. The 22 alerts use {{ticker}} and {{close}} placeholders in their messages, making them directly compatible with TradingView Webhooks, copy-trading platforms, Telegram/Discord bots, and any system that parses JSON.
Is it free to use?
Yes. Open-source indicator under the Mozilla Public License 2.0. You can review the full code, use it freely on TradingView, and create derivative copies while respecting the license terms.
⚠️ DISCLAIMER
This indicator is a technical analysis tool provided solely for educational and informational purposes. It does not constitute financial advice, an investment recommendation, or an invitation to trade any instrument. Moving averages are reactive (not predictive) indicators: they are based on historical data and, by their nature, can produce delayed signals in markets with sharp trend changes. In ranging or low-volatility market contexts, crossovers can be frequent and not particularly informative. Every trading decision is the sole responsibility of the trader. Past performance does not guarantee future results.
© 2026 Lic. Farias Foresi, Leandro M. — License: Mozilla Public License 2.0
インジケーター
Session Liquidity Sweep Map [PhenLabs]📊 Session Liquidity Sweep Map
Version: PineScript™ v6
📌 Description
The Session Liquidity Sweep Map (SLSM) is a session-anchored liquidity engine that maps where resting orders accumulate around the Asia, London, and New York session extremes, then tracks the full life cycle of those pools from formation, to sweep, to structural confirmation. Rather than plotting static swing lines, SLSM treats each finalized session high and low as buy-side or sell-side liquidity and watches for the precise moment price raids that liquidity and rejects.
The indicator solves a core problem for intraday traders: distinguishing a genuine stop-run that leads to a reversal from a clean breakout that continues. By requiring a wick-rejection sweep to be followed by a market structure shift within a defined window, SLSM filters out unconfirmed pokes and only elevates sweeps that are validated by a CHoCH in the opposite direction.
Once a sweep is confirmed, SLSM projects the most logical opposing draw on liquidity and lays out structure-based R-multiple targets, giving you a complete read on where price came from and where it is likely being pulled next.
🚀 Points of Innovation
Full pool life-cycle state machine: Building → Complete → Swept → Awaiting MSS → Confirmed / no-MSS
Two-stage validation that pairs a wick-rejection sweep with a mandatory structure-shift confirmation
Dual sweep triggers: classic close-back-inside rejection or an ATR-scaled displacement break
Equal-high/low clustering that merges stacked liquidity into a single weighted pool
Confidence score blending rejection-wick quality, MSS speed, and displacement magnitude
Live dashboard surfacing the nearest untaken BSL above and SSL below current price
🔧 Core Components
Session Tracker: Builds developing highs/lows per session in a user-selected timezone and finalizes them into resting pools at session close
Pool Manager: Creates, clusters, caps, ages out, and visually fades liquidity pools to respect drawing-object limits
Sweep Engine: Flags a pool as swept when a confirmed bar penetrates it by the tick tolerance and rejects, or breaks it with displacement
MSS Validator: Watches the protected swing point and confirms the sweep on an opposite-direction close within the lookahead window
Projection Module: Plots the opposing draw and R-multiple targets measured from the sweep extreme
🔥 Key Features
Non-repainting logic: pools finalize at close, sweep/MSS evaluate only on confirmed bars, swings use right-anchored pivots
Configurable kill-zone shading that tints the background while each session is active
Equal-level clustering with an adjustable tick tolerance to keep the chart clean
Per-side pool cap that automatically removes the oldest untaken pool when limits are reached
Three discrete alerts: liquidity swept, sweep + MSS confirmed, and new opposing draw projected
🎨 Visualization
Liquidity Lines: Solid session-colored levels for live pools that fade and dash once swept
Sweep & MSS Labels: Directional sweep tags and a “MSS ✓” confirmation label with optional confidence score
Draw & Targets: A dotted opposing-draw line plus dashed R-multiple target lines from the sweep extreme
Dashboard: Per-session phase and high/low, with the nearest untaken BSL/SSL relative to price
📖 Usage Guidelines
Sessions
Session Windows (Asia/London/NY) — Default: 2000-0000 / 0200-0500 / 0930-1100 — Description: Defines each kill-zone in the chosen timezone; adjust to your instrument’s active hours
Kill-zone transparency — Default: 90 — Range: 50-99 — Description: Controls background tint intensity for active sessions
Sweep Detection
Penetration tolerance (ticks) — Default: 2 — Description: Minimum overshoot beyond a pool required to register a sweep
Require close back inside — Default: true — Description: Demands a wick-rejection close; the robust default
Displacement body x ATR — Default: 1.0 — Range: 0.2+ — Description: Body size relative to ATR for the alternative displacement trigger
MSS / Structure
Swing pivot length — Default: 5 — Range: 2+ — Description: Left/right strength for non-repainting swing detection
MSS lookahead (bars) — Default: 20 — Range: 3+ — Description: Bars allowed after a sweep for the structure break to confirm
✅ Best Use Cases
Intraday reversal trading off Asia/London/NY session stop-runs
ICT and Smart Money workflows centered on liquidity raids and CHoCH confirmation
Bias-building by reading the nearest untaken liquidity as the directional draw
Scalping and futures/index/crypto sessions with defined kill-zone windows
⚠️ Limitations
Performance depends on correct timezone and session-window configuration per instrument
The MSS lookahead window can expire on slow markets, leaving valid sweeps marked no-MSS
Designed for intraday timeframes; session anchoring is less meaningful on HTF charts
Confirmation introduces a deliberate lag versus the raw sweep, by design
💡 What Makes This Unique
Session-anchored pools rather than generic swing liquidity, tying liquidity to behavioral kill-zones
Mandatory two-stage sweep + MSS confirmation that suppresses unvalidated breakouts
An integrated draw-and-target projection that completes the from/to liquidity narrative
🔬 How It Works
1. Pool Formation
Each session tracks a developing high and low while active, then finalizes both as resting liquidity at close
Highs become buy-side liquidity (BSL) above; lows become sell-side liquidity (SSL) below
2. Sweep & Structure Shift
A confirmed bar must trade beyond a pool by the tolerance and close back inside, flipping it to “awaiting MSS”
An opposite-direction close through the protected swing within the lookahead confirms the sweep as tradable
3. Projection & Scoring
On confirmation, the nearest opposing pool is projected as the draw and R-targets are measured from the sweep extreme
A 0-100 confidence score weights rejection-wick quality, MSS speed, and displacement
💡 Note: SLSM is a non-repainting decision-support tool, not a signal-only system. Wait for the “MSS ✓” confirmation before acting on a sweep, and use the projected draw plus R-targets for trade management rather than entry timing alone.
インジケーター
RCS Sessions Full# RCS Sessions
RCS Sessions is a session-based timing indicator designed to help traders visualize key institutional reference points throughout the trading day.
The indicator automatically plots important session opens, closes, institutional print times, news windows, and delivery periods directly on the chart. All levels are displayed in advance for the current trading day while also preserving historical references from previous days for review and study.
The framework is built around the RCS Execution methodology, which emphasizes timing, positioning, liquidity, and institutional delivery rather than traditional retail indicators.
## Key Session Markers
* 00:00 – Midnight
* 03:00 – Asia Open
* 07:00 – New York Midnight
* 08:00 – 7H Print
* 09:00 – Sydney End / 4H Print
* 10:00 – London Open
* 12:00 – Asia End
* 13:00 – 4H Print
* 15:00 – 7H Print / New York Open
* 15:30 – News
* 16:00 – News Wave
* 16:30 – New York Open
* 17:00 – 4H Print / Order Delivery
* 19:00 – London End
* 21:00 – New York PM / 4H Print
* 22:00 – End of Day / 7H Print
## Features
* Displays the complete trading day in advance.
* Preserves previous session references for historical analysis.
* Fully customizable timezone support.
* Adjustable line colors, styles, labels, and visibility.
* Designed for futures, indices, forex, and other liquid markets.
* Lightweight and easy to read.
* Suitable for discretionary and rule-based execution models.
## Intended Use
This indicator does not generate buy or sell signals.
Its purpose is to provide a structured timing framework that helps traders organize market analysis around major institutional session transitions, liquidity events, and delivery windows.
## Recommended Usage
For best results, combine the session framework with:
* Market structure analysis
* Liquidity identification
* Session-based execution
* News awareness
* Risk management
* Institutional confirmation models
Trade the system – not the emotion.
© Raul Cristian Sararu
インジケーター
NOA Levels
NOA Levels — Structural Levels, Volume Profiles & Gap Analytics
OVERVIEW
NOA Levels combines three institutional reference frameworks into a single
overlay: prior-period structural levels, volume-derived value zones, and a
statistical session-gap engine. It is built for traders who anchor decisions to
where price has previously transacted and how the current session opens relative
to that history.
Everything plots on intraday timeframes and reads off higher-timeframe data, so
the levels stay consistent regardless of the chart resolution you trade on.
WHAT IT PLOTS
1. Prior-Period Levels (Day / Week / Month)
Previous high, low, and midpoint for each period, drawn as horizontal
references that extend across the active period. High/low use dashed lines;
midpoints use dotted lines to keep them visually subordinate. Compact labels
(pdH/pdM/pdL, pwH/pwM/pwL, pmH/pmM/pmL) keep the chart readable.
2. Volume Profiles (Daily & Weekly)
Point of Control (POC) plus Value Area High/Low for the prior day and prior
week, computed from an intrabar volume distribution. Value Area % is
adjustable (40% for a tight zone around the POC, ~70% for the standard Market
Profile convention). Resolution controls the number of price rows used to
build each profile.
3. Session Gap Engine
On each new session, the open is measured against the prior close. Every gap
is boxed and classified into one of six behavioural profiles based purely on
where the session ultimately closes relative to the gap zone:
• GapUp & Go / Hold / Reverse
• GapDn & Go / Hold / Reverse
The on-chart label shows the gap size and the developing profile in real time;
the tooltip carries the full statistical breakdown.
GAP STATISTICS (the core differentiator)
Rather than judging gaps with arbitrary thresholds, NOA Levels builds a running
distribution from your own chart's history (lookback is adjustable). For each new
gap it reports:
• Magnitude in % and price, normalized as a z-score (σ) and percentile rank
against prior gaps — so a "big" gap is defined by this symbol's own behaviour
• A Common vs. Breakaway tag (whether the open clears the prior day's range)
• Historical Go / Hold / Reverse percentages, split by gap direction
• Live fill tracking (whether the prior close has been retested)
Magnitude is normalized by absolute gap %, which is always available — so gaps
plot and compute statistics even on freshly listed symbols where ATR has not yet
warmed up. The ATR multiple is shown as an optional reference field once enough
daily history exists.
REPAINTING
Higher-timeframe levels use confirmed prior-period values (lookahead with a
one-bar offset), so historical levels do not repaint. The developing gap profile
and fill status update intrabar by design, as they describe the session in
progress; the profile is finalized and recorded into the distribution once the
session closes.
HOW TO USE
- Treat prior highs/lows and POC/Value Area as decision zones — areas where
reaction is more likely, not automatic buy/sell signals.
- Use the gap percentile and σ to gauge whether an open is routine or unusual
for this instrument before sizing or fading it.
- Read the Go/Hold/Reverse distribution as context for the current gap's most
common historical resolution — it is descriptive, not predictive.
- Midpoints often act as intraday pivots; the gap mid frequently marks the
fill objective.
SETTINGS
Inputs are grouped by period (Day / Week / Month) and function (Levels / Volume /
Gaps), with colors, line widths, label toggles, Value Area %, profile resolution,
gap lookback, and ATR length all configurable. Session and week separators are
optional.
ALERTS
New Session, New Week, New Month, and Session Gap Detected.
インジケーター
HTF Power of Three @SafarTradesHTF Power of Three
HTF Power of Three is a higher timeframe visualization framework designed to project a developing Daily, Weekly, or Monthly candle directly onto a lower timeframe chart.
The indicator is built around ICT's Power of Three (PO3) concept, allowing traders to monitor the current higher timeframe range and observe how price develops within that structure throughout the session.
Rather than repeatedly switching between execution and higher timeframes, traders can maintain awareness of the active higher timeframe candle while remaining focused on lower timeframe execution.
Many traders use the Daily, Weekly, or Monthly candle as a reference for directional bias, range analysis, and Power of Three development. However, viewing these structures traditionally requires frequent timeframe changes.
HTF Power of Three solves this by projecting the active higher timeframe candle directly onto the chart, allowing traders to continuously monitor:
• Current higher timeframe range
• Relative position of current price within that range
• Expansion of the active candle as new price data forms
• Potential accumulation, manipulation, and distribution development
• Higher timeframe context during lower timeframe execution
Power of Three Framework
The indicator is designed to help traders visualize how price is developing inside the active higher timeframe range.
As the higher timeframe candle evolves, the projected structure updates in real time, allowing traders to monitor changes in range expansion, directional movement, and overall delivery without leaving the execution chart.
By maintaining visibility of the active higher timeframe candle, traders can better understand where current price is trading relative to the projected range and how the developing structure aligns with their market narrative.
Higher Timeframe Reference Levels
The projected candle includes key higher timeframe reference points that help traders maintain context throughout the session.
Optional display elements include:
• Open
• High
• Low
• Current Close
• Range Information
• Price-Based Range Measurements
• Tick-Based Range Measurements
These references allow traders to quickly evaluate the state of the developing higher timeframe candle without requiring separate charts.
Customization
The indicator includes extensive display controls allowing users to customize:
• Daily, Weekly, or Monthly projections
• Projection positioning and offset
• Bullish and bearish candle appearance
• Wick, border, and body styling
• OHLC label visibility
• Range table visibility
• Table positioning
• Range display format
• Daily calculation method options
Intended Use
HTF Power of Three is designed for traders who combine lower timeframe execution with higher timeframe narrative and range analysis.
By projecting the active Daily, Weekly, or Monthly candle directly onto the chart, the indicator provides continuous visibility of higher timeframe structure while reducing the need for constant timeframe switching.
インジケーター
Multi-Timeframe SMA WaveThis is a powerful multi-timeframe Simple Moving Average (SMA) visualizer that plots up to 28 different timeframes of the same SMA length simultaneously on your current chart.Instead of looking at one SMA on one timeframe, you see a "wave" or "fan" of SMAs from very fast (1-second) all the way to very slow (1-month). This creates a visual hierarchy of trend strength across different scales.
Key Features: 28 Timeframes covered: 1S, 5S, 10S, 15S, 30S, 1m, 2m, 3m, 5m, 10m, 15m, 20m, 30m, 45m, 60m, 90m, 120m, 180m, 240m, 360m, 480m, 720m, 1D, 2D, 3D, 1W, 2W, 1M.
Color-coded lines with increasing thickness on important timeframes (e.g., 5m is thicker).
Dynamic labels on the right side showing which line belongs to which timeframe (updates on the last bar).
Fill zones between certain groups (1-3m and 60-120m) for visual emphasis.
Info table in top-right showing SMA length and number of timeframes.
Uses request.security() with proper gaps/lookahead settings for clean data.
Trading Interpretation TipsBullish Setup: Price above most SMAs + wave sloping upward + fast TFs above slow TFs.
Bearish Setup: Price below most SMAs + wave sloping downward + fast TFs below slow TFs.
Compression / Breakout Setup: When the "wave" squeezes tightly together → often precedes strong moves.
Divergence: If price makes new highs but the higher-timeframe SMAs are flattening/turning down → warning sign.
Customization IdeasChange SMA len (default 5) — smaller = more reactive, larger = smoother.
Enable/disable fill zones.
Add more plots if you need even more timeframes.
Modify colors and line thickness for better visibility.
Summary:
This indicator is excellent for traders who use multi-timeframe analysis but hate switching between charts. It condenses a huge amount of information into one clean visual "wave," making it much easier to see alignment (or lack thereof) across timeframes. Very useful for day traders, swing traders, and discretionary price action traders who want contextual awareness.
インジケーター
New York Session Highlighter v6 (08:30-11:30)* **NY AM Session Highlight**: Automatically shades the chart background from 08:30 to 11:30 New York Time (the classic NY Killzone / Morning Session).
* **Automatic DST Handling**: Utilizing the "America/New_York" timezone, this script automatically adjusts for Eastern Standard Time (EST) and Eastern Daylight Time (EDT). No manual updates required.
* **Fully Customizable**: Easily adjust the session hours, active days, background color, and opacity directly from the script settings.
* **Pine Script v6 Optimized**: Built natively using the latest v6 standards for maximum type-safety and chart performance.
インジケーター
SMA 50/200/400 Touch & Cross AlertSMA Touch & Cross Signal is a clean trend signal indicator based on SMA 50, SMA 200 and normal SMA400 .
It focuses on key market structure changes by detecting when short-term momentum (SMA 50) interacts with long-term trend (SMA 200).
🔹 Features / 功能
SMA 50 / SMA 200 / SMA 400 trend lines
Signals when the SMA 50 crosses the SMA 200
Clean visual markers (no noise, no background clutter)
Suitable for trend reversal identification
🔹 How to use / 使用方法
Green triangle: SMA 50 crosses above SMA 200 (bullish shift / 多头趋势变化)
Red triangle: SMA 50 crosses below SMA 200 (bearish shift / 空头趋势变化)
以及SMA 200/400 位置来看阻力和支撑
This indicator helps traders identify potential trend changes and momentum shifts in a simple and clean way.
🔹 Best timeframe / 适用周期
1H (1小时)
4H (4小时）
Daily（日线)
🔹 Notes / 说明
This tool is designed for trend-following and breakout-confirmation strategies. It avoids noise and focuses only on meaningful structural changes.
This script is designed for educational and analytical purposes.
インジケーター
Multi-Timeframe Liquidity RangeMulti-Timeframe Liquidity Range helps to detect the liquidity zone with high probability to be touched.
インジケーター
Range Breakout Strategy (Candle Close/ Any Break) + P<his script defines your chosen range (in candles) based on a candle close or any range break. This can be changed in the settings. The default is candle close - please change it to any range break if you want. As of now, candle close setting on NQ seems more profitable, but this of course will depend on the underlying and also the range of your choosing.
The yellow line shows your entry point. You can of course edit line colors etc. in the settings. The dashed lines show your stop loss (red) and profit target (green).
Then, the script calculates the P&L for your strategy. You can play with the settings and dates to calculate the P&L and see it change in real time in the stats table as you do so.
I took care to calculate partial wins and losses as well, which is all indicated on the chart.
I hope you find this useful.
Happy trading,
~ Ava ~
インジケーター
4 Independent Shaded MA Pairs + EnvelopesThis Pine Script creates a highly customizable multi-pair Moving Average indicator with shading and optional envelopes. It displays up to 4 completely independent MA pairs on the chart, where each pair consists of two moving averages (MA1 and MA2) that can have:
Different timeframes (multi-timeframe capable)
Different lengths and types (SMA, EMA, WMA, HMA, RMA, VWMA)
Different sources (close, open, hl2, etc.)
Individual colors
For each pair, you can also add envelopes (bands) around either MA1 or MA2, in either Points or Percent, with Upper, Lower, or Both lines.
The script includes shaded fills between MA1 MA2 (the main visual feature) and optional fills between MAs and their envelopes.
Main Use Cases:
Multi-Timeframe Trend & Structure Analysis
The most powerful use. Example setup:Pair 1: Two 32-period Dailies (fast structure)
Pair 2: Two 64-period Dailies or 4H
Pair 3/4: Higher timeframes (Weekly or 200+ periods)
This gives you a clean "layered" view of trend across different scales.
Visual "Zones" or Dynamic Support/Resistance
The shaded areas between each MA pair act as visual value zones. When price is inside a fill, it's in "equilibrium"; when it breaks out, it shows conviction.
Envelope Trading Strategies
Use the envelopes like dynamic Keltner Channels or Donchian-style bands for: Mean reversion (price touching envelope)
Breakout entries
Volatility visualization
Clean Alternative to MA Ribbons
Instead of 8–10 individual MAs cluttering the chart, you get 4 controlled, color-coded, shaded pairs that are easier to read.
Confluence Tool
Look for moments when multiple pairs align (e.g., all MA1s above MA2s + price breaking upper envelopes) for high-probability directional bias.
Strengths: Very flexible and clean
Excellent for discretionary traders who use multiple moving averages
Great visual clarity thanks to the fills
Typical Trading Style:
Swing trading, position trading, and ICT/SMC-style traders who like higher-timeframe bias combined with lower-timeframe execution.
インジケーター
Mechanical Day Trading : HA Modelวิธีใช้งาน
สำคัญที่สุด — อินดิเคเตอร์วาดแท่ง Heikin Ashi ทับลงบนกราฟ ให้ไปที่ Chart settings (รูปตา/เกียร์) → ปิดแท่งเทียนจริง (Body / Borders / Wick) จะเห็นแท่ง HA สีเขียว/แดง/เทาชัดเหมือนภาพ ถ้าไม่อยากปิดก็ปิด toggle "วาดแท่ง Heikin Ashi" แล้วใช้แค่เส้น/dots/สัญญาณแทนได้
ลงตามปกติ: Pine Editor → วางโค้ด → Save → Add to chart (ใช้กับ TF เล็กอย่าง 5m ตามภาพ)
สิ่งที่จะเห็นบนกราฟ
แท่ง HA: เขียว = HA ขาขึ้น, แดง/น้ำเงิน = ขาลง, เทา = บอดี้เล็ก (ลังเล)
EMA Ribbon 8/13/21/50 + แถบ fill เปลี่ยนสีตามการเรียงตัว (เขียวเมื่อ stack ขึ้น แดงเมื่อ stack ลง)
Daily VWAP (แดง) + Secondary VWAP (ส้ม) มี label ลอยทางขวาตามภาพ
Trend dots: จุดเขียวใต้แท่งตอนขาขึ้น / จุดแดงเหนือแท่งตอนขาลง
แถบ session สีที่ขอบล่างจอ (Asia ส้ม / London ฟ้า / NY ม่วง)
ตรรกะสัญญาณ (ตรงสเปก ทุกตัวยืนยันตอนแท่งปิด ไม่ repaint)
BUY = HA เขียวแรง + ราคาเหนือ ribbon (EMA เรียง 8>21>50 และราคา>EMA8) + dot เขียว + ราคาเหนือ Daily VWAP
SELL = ตรงข้ามทุกข้อ
EXIT = ตาม exitMode (ดีฟอลต์ "Any" = dot เปลี่ยนฝั่ง หรือ HA เปลี่ยนสีสวนทาง หรือ ตัด EMA21 กลับ)
ระบบบังคับให้ ออกก่อนเข้าใหม่ เลยได้ลำดับ EXIT → BUY/SELL สวยๆ ไม่ยิงรัวทุกแท่ง
ปรับได้ใน Settings
EMA: ความยาวทั้ง 4 เส้น (EMA3 = เส้นอ้างอิง EXIT)
VWAP: เปิด/ปิดแต่ละเส้น, anchor ของ Secondary (Session/Week/Month), ใช้ VWAP กรองสัญญาณหรือไม่
Trend dots: เลือก Supertrend หรือ PSAR + ปรับ sensitivity (Supertrend = Factor/ATR, PSAR = Start/Inc/Max)
HA: % บอดี้ที่นับเป็น "เทา"
Signals: เปิด/ปิด label, เลือกเงื่อนไข EXIT
Sessions: timezone + เวลาแต่ละ session + เปิด/ปิดทีละอัน
สีทุกองค์ประกอบ (อยากได้ bearish เป็นน้ำเงินเข้มก็เปลี่ยนช่อง Bearish ได้)
Alert — Add alert → Condition "HA Model" → เลือก Buy / Sell / Exit Signal → frequency Once Per Bar Close
ข้อควรรู้
VWAP ต้องมีข้อมูล volume (EURUSD IC Markets มี tick volume ใช้ได้)
session คิดตาม timezone ที่ตั้ง (ดีฟอลต์ UTC+7 ตามภาพ) เวลา London กับ NY ดีฟอลต์ทับกันช่วง 19:30–23:00 แถบล่างช่วงนั้นจะเป็นสี NY ทับ London
เงื่อนไข BUY/SELL ค่อนข้างเข้ม (ต้อง EMA เรียงสมบูรณ์) สัญญาณเลยไม่เยอะ ถ้าอยากได้ถี่ขึ้นบอกได้ เดี๋ยวผ่อนเงื่อนไข ribbon ให้
インジケーター
インジケーター
