Bedaiwi's Smart PivotsBedaiwi's Smart Pivots is a three-level market-structure indicator that classifies price turning points as Minor, Intermediate, and Major highs and lows.
HOW IT WORKS
Minor Pivots
A Minor High is confirmed when the middle bar of a three-bar formation has a high that is strictly higher than the highs immediately before and after it.
A Minor Low is confirmed when the middle bar has a low that is strictly lower than the lows immediately before and after it.
Equal highs and equal lows are not treated as Minor pivots.
Intermediate Pivots
Intermediate pivots are derived from confirmed sequences of Minor pivots.
An Intermediate High is identified when a higher Minor High is followed by a lower Minor High.
An Intermediate Low is identified when a lower Minor Low is followed by a higher Minor Low.
Major Pivots
Major pivots apply the same hierarchical logic to confirmed Intermediate pivots.
A Major High is identified when a higher Intermediate High is followed by a lower Intermediate High.
A Major Low is identified when a lower Intermediate Low is followed by a higher Intermediate Low.
SYMBOLS AND COLORS
- Red diamond: Intermediate High
- Green diamond: Intermediate Low
- Red exclamation mark: Major High
- Green exclamation mark: Major Low
Optional Minor pivots use the same High and Low color settings.
When the replacement option is enabled, an Intermediate symbol is removed and replaced with an exclamation mark if the same point is later promoted to Major status.
HISTORICAL PLOTTING AND CONFIRMATION DELAY
Pivot identification requires subsequent price information.
A Minor pivot is confirmed only after the following bar closes. Intermediate and Major pivots require additional confirmed pivot sequences, so their confirmation occurs later.
After confirmation, the indicator places the symbol on the historical bar where the relevant high or low occurred. Therefore, a symbol displayed on an earlier bar was not necessarily available in real time on that bar.
Historical placement is used only to show the actual location of the confirmed turning point. It should not be interpreted as a signal that was known on the historical pivot bar.
SETTINGS
Users can:
- Show or hide Minor pivots
- Show or hide Intermediate pivots
- Show or hide Major pivots
- Replace an Intermediate symbol when it becomes a Major pivot
- Customize High and Low pivot colors
PRACTICAL USE
Smart Pivots can help users:
- Study market structure
- Identify significant historical swing highs and lows
- Separate short-term fluctuations from higher-level price structure
- Review possible support and resistance areas
- Add context to discretionary price-action analysis
LIMITATIONS
Smart Pivots is an analytical indicator. It does not place trading orders and does not define entries, exits, stop-loss levels, profit targets, position sizing, or expected returns.
Pivot confirmation is delayed by design because later price action is required. Results may vary between symbols, timeframes, sessions, and data feeds.
The indicator does not identify final market tops or bottoms with certainty. Historical observations do not guarantee future market behavior.
This script is provided for research and educational purposes only. It is not financial or investment advice. インジケーター
NEXUS Three professional modules. One unified indicator.🌐 WHAT IS NEXUS?
NEXUS combines three independent professional-grade
modules into a single, clean indicator — eliminating
the need to stack multiple scripts on your chart.
- MODULE 1 — Market Sessions Visualizer
- MODULE 2 — Volume–Price Divergence Detector
- MODULE 3 — Key Levels & Structural Reference Engine
━━━━━━━━━━━━━━━━━━━━━
MODULE 1 — MARKET SESSIONS
━━━━━━━━━━━━━━━━━━━━━
Visualize the four major Forex/Futures trading sessions
with precision and full customization.
★ Sessions covered:
· Tokyo (default: 00:00–09:00 UTC)
· London (default: 07:00–16:00 UTC)
· New York (default: 13:00–22:00 UTC)
· Sydney (default: 21:00–06:00 UTC)
★ Display modes:
· Boxes — classic high/low range boxes
· Zones — colored background highlights
· Timeline — compact bar-level session markers
· Candles — colored candle bodies per session
★ Additional tools:
· Session Open/Close line
· Session 0.5 midpoint level
· Merge overlapping sessions
· Live pip / % change labels
· Weekend exclusion toggle
· Fully customizable colors, borders & label sizes
· Lookback depth control (default: 150 days)
· All session times entered in UTC — no timezone
conflicts regardless of your chart setting
★ Alerts:
Session open · New session high · New session low
━━━━━━━━━━━━━━━━━━━━━
MODULE 2 — VOLUME–PRICE DIVERGENCE
━━━━━━━━━━━━━━━━━━━━━
Identifies moments when volume surges significantly
but price barely moves — a classic footprint of
institutional accumulation or distribution.
★ Two signal types:
· 🔴 DIV (Divergence) — high volume + small price body
→ Strong sign of hidden positioning
· 🟠 SHADOW — high volume + large wick / shadow candle
→ Rejection or absorption signal
★ How it works:
· Compares current volume against a 20-bar SMA
· Volume spike threshold: configurable (default 600%)
· Price change measured via 3 selectable methods:
— Body / Open
— Body / Range
— Range / Open
· Shadow detection with adjustable body-to-wick ratio
★ Visual aids:
· Color-coded volume histogram
(Gray → Yellow → Orange → Red)
· On-chart signal shapes with text labels
· Live info table (top-left):
current volume · volume % change · price % change
body/range ratio · current signal status
★ Alerts:
Volume spike · Shadow candle · Full divergence signal
━━━━━━━━━━━━━━━━━━━━━
MODULE 3 — KEY LEVELS & STRUCTURAL REFERENCE
━━━━━━━━━━━━━━━━━━━━━
A comprehensive reference engine that plots all
critical price levels a professional trader monitors.
★ Session High/Low levels:
· Asia Session (18:00–03:00 ET, configurable)
· London Session (03:00–08:00 ET, configurable)
· New York Session (08:30–17:00 ET, configurable)
→ Lines auto-update in real time
→ Auto-detect and label when a level is broken
★ Market structure levels (ET — NYSE aligned):
· Key time opens: 00:00 · 02:00 · 05:00 · 08:30
09:30 · 10:00 · 14:00 · 15:00 · 16:00 · 17:00
· 4H Open · Daily Open · Weekly Open · Monthly Open
★ Range midpoint levels:
· Previous Day Mid Range (50%)
· Market Open Mid Range (live, updates intraday)
· Weekly Mid Range
· Monthly Mid Range
★ Higher-timeframe levels:
· Previous Day High / Low
· Weekly High / Low
· Monthly High / Low
· All-Time High
★ Pivot calculations (previous day data):
· Standard Pivot Points: PP · R1 · R2 · S1 · S2
· Central Pivot Range (CPR): TC · PP · BC
with CPR width % context label (Trending / Mixed / Range)
★ Smart features:
· Auto-Simplify on HTF — automatically hides granular
levels on higher timeframes to reduce visual noise
· Smart label positioning that adapts to screen view
· Level confluence detection — merges labels when
two levels share the same price
· Vertical day separator lines at 17:00 ET (last 14 days)
· Days-of-week labels at session open
· Extend All Lines toggle
· Global color & text size override
· Full per-level style control (color · style · width)
· Timezone selector for all session calculations
━━━━━━━━━━━━━━━━━━━━━
⚙️ QUICK SETUP GUIDE
━━━━━━━━━━━━━━━━━━━━━
1. Add NEXUS to any intraday chart (1m to 4H recommended)
2. Sessions Module
→ All session times are in UTC by default
→ No need to change your chart timezone
→ Toggle sessions on/off individually
→ Choose your preferred display mode
3. Divergence Module
→ Start with default settings
→ Lower the Volume Threshold (%) on low-liquidity
instruments if signals are too rare
→ Enable "Show Debug Info" for manual calibration
4. Key Levels Module
→ Set your timezone (default: America/New_York)
→ Toggle each level group independently
→ Enable "Auto-Simplify on Higher Timeframes" to keep
the chart clean when zooming out
→ Use "Extend All Lines" for a forward-looking view
━━━━━━━━━━━━━━━━━━━━━
📌 RECOMMENDED TIMEFRAMES
━━━━━━━━━━━━━━━━━━━━━
All modules active → 1m · 3m · 5m · 15m · 30m
Sessions + Levels → 1H · 2H · 4H
Levels only → Daily
⚠️ Sessions module is intraday-only by design.
It will not plot on Daily or higher timeframes.
━━━━━━━━━━━━━━━━━━━━━
📊 COMPATIBLE INSTRUMENTS
━━━━━━━━━━━━━━━━━━━━━
Futures (ES, NQ, MES, MNQ, YM, CL, GC...)
Forex (all major, minor & exotic pairs)
Crypto (BTC, ETH and all altcoins with volume)
Equities (US stocks & ETFs with intraday data)
Indices (SPX, NDX, DXY...)
━━━━━━━━━━━━━━━━━━━━━
📋 RELEASE NOTES
━━━━━━━━━━━━━━━━━━━━━
v1.0 — Initial release
· Full integration of all three modules
· Smart label positioning engine
· Timeframe-aware auto-simplification
· Confluence level merging
· Complete alert system
━━━━━━━━━━━━━━━━━━━━━
⚠️ DISCLAIMER
━━━━━━━━━━━━━━━━━━━━━
This indicator is for informational and educational
purposes only. It does not constitute financial advice.
Past signals do not guarantee future results.
Always manage risk appropriately. インジケーター
インジケーター
インジケーター
Pivot Breakout Retest Signals [algo_aakash]Overview
Pivot Breakout Retest Signals is a price action indicator that helps traders identify potential bullish and bearish retest opportunities around Classic Pivot Point levels.
The indicator calculates pivot levels from a selected higher timeframe (Daily, Weekly, or Monthly) and monitors price for breakout events followed by retests of those levels. When a valid retest is confirmed within the specified window, the script displays a Bullish or Bearish signal on the chart.
Features
• Classic Pivot Point calculation
• Daily, Weekly, or Monthly pivot timeframe selection
• Automatic breakout detection
• Retest confirmation logic
• Bullish and Bearish signal visualization
• Configurable retest window
• Alert support for signal events
How It Works
Bullish Conditions
1. Price breaks above a Pivot, R1, or R2 level.
2. The breakout is recorded.
3. Price retests the broken level within the user-defined retest window.
4. If price closes back above the level after the retest, a Bullish signal is generated.
Bearish Conditions
1. Price breaks below a Pivot, S1, or S2 level.
2. The breakdown is recorded.
3. Price retests the broken level within the user-defined retest window.
4. If price closes back below the level after the retest, a Bearish signal is generated.
Inputs
Pivot Timeframe
Select the timeframe used to calculate pivot levels:
• Daily
• Weekly
• Monthly
Retest Window
Determines how many candles are allowed between the breakout and the retest confirmation.
Alerts
The script includes built-in alert conditions:
• Bullish Alert
• Bearish Alert
Alerts can be used with TradingView's notification system or connected to external workflows.
Notes
• Pivot levels are calculated using completed higher-timeframe data.
• Signals are generated only after both breakout and retest conditions are satisfied.
• The indicator is intended as an analytical tool and may be combined with other forms of technical analysis.
Limitations
• Signals can occur during ranging or volatile market conditions.
• Not every breakout or retest will lead to sustained price movement.
• Additional confirmation methods may be useful depending on the market and trading style. インジケーター
インジケーター
Decision Point Planner [AGPro Series]Decision Point Planner
🧠 Core Idea
Is price sitting at a decision point that deserves review, patience, or rejection?
📌 Overview / What it does
Decision Point Planner is a chart-first risk planning tool built to evaluate whether the current price area is meaningful enough to deserve attention.
The script maps one active decision point from structure shelf, balance edge, or trend backbone context, then scores the area using location quality, reaction candle behavior, volume support, trend context, available room, and invalidation distance. The output is a 0-100 Decision Score, a clear next-action state, a decision zone, an invalidation shelf, a target-room corridor, compact labels, alerts, and a premium AGPro panel.
It does not predict price direction, automate execution, or print direct buy/sell signals.
🎯 Purpose & Design Philosophy
This script was built for traders who want to know whether the chart is actually at a meaningful decision area or simply moving through noise.
Many tools show levels, zones, or signals in isolation. Decision Point Planner focuses on a narrower planning question: if price is near a decision reference, is the reaction strong enough, is risk still balanced, and is there enough room before the next obstacle?
The design supports a patient planning mindset: identify the point, read the reaction, check room and invalidation, then decide what deserves attention.
⚡ Why This Script Is Different
Most tools focus on plotting many support/resistance levels or marking every reaction.
This script does NOT create a generic S/R map, order-block scanner, FVG map, or prediction engine.
Instead, it selects one active decision reference and turns it into a planning workflow: Decision Score, Zone Type, Reaction State, Room/Risk, and Next Action.
⚙️ Methodology
1. Context Detection
The script detects the active planning side automatically using trend context and range location, or the user can force Long Context or Short Context.
2. Reference Mapping
It compares three decision references: the latest structure shelf, the active balance edge, and the trend backbone. The closest relevant reference becomes the active decision point.
3. Reaction Evaluation
It evaluates whether price is touching or approaching the zone, whether the candle shows a valid reaction, whether volume supports the reaction, whether trend context agrees, and whether room and invalidation remain balanced.
4. Visual Output
It displays a decision zone, invalidation shelf, target-room corridor, compact chart labels, alerts, and a clean AGPro panel.
🗺️ How to Read the Chart
Decision Zone = the current area where price is being evaluated as a decision point.
Invalidation Shelf = the reference beyond the zone that marks rejection in this rule set.
Target-Room Corridor = the available forward room toward the nearest obstacle or a minimum room guide.
Labels = compact attention markers showing ACTION, WAIT, PATIENCE, REJECTED, ROOM, or D POINT context.
Colors = teal and pink show active directional context, amber shows caution, indigo shows wait/reaction context, and blue is reserved for the AGPro panel header.
Panel = summarizes Decision Score, Zone Type, Reaction State, Room Risk, and Action.
🚦 Signals & States
• ACTION REVIEW → the decision point has enough score, reaction, room, and risk quality to deserve closer review.
• WAIT REACTION → price is near the decision point, but the reaction is still incomplete.
• PATIENCE → the area is active but quality, room, or risk is not clean enough yet.
• REJECTED → price crossed the invalidation shelf for the active decision point.
• STAND BY → price is not close enough to the active decision reference.
🔔 Alerts Logic
• Decision Point Action Review → triggers when the state enters ACTION REVIEW.
• Decision Point Wait Reaction → triggers when price is near the point but reaction is incomplete.
• Decision Point Patience → triggers when the active point requires patience or broader confirmation.
• Decision Point Room Limited → triggers when the point is active but forward room is limited.
• Decision Point Rejected → triggers when price crosses the active invalidation shelf.
Alerts are attention markers. They are not trade instructions.
🧩 Confluence Logic
Decision quality improves when location, reaction candle behavior, volume support, trend context, target room, and invalidation distance align.
The strongest read appears when price is near the decision zone, the reaction candle is efficient, volume is supportive, trend context agrees, room is open, and risk distance is balanced.
📊 When to Use
• Around pullbacks where price is near a meaningful planning reference.
• During breakout or continuation preparation when the next reaction matters.
• Near range edges or balance transitions where patience is required.
• When comparing whether a setup deserves review or should remain on watch.
• On liquid markets where ATR, volume, and recent structure are meaningful.
⚠️ When NOT to Use
• Extremely low-liquidity markets with unreliable volume and candles.
• Highly noisy micro-timeframes where decision references change too frequently.
• News-driven volatility spikes where ATR and candle ranges expand abnormally.
• Charts where the user expects automatic buy/sell signals.
• As a standalone reason to enter or exit a trade.
🎛️ Key Inputs
• Planning Side → selects Auto, Long Context, or Short Context.
• Decision Range Lookback → defines the planning range and target-room obstacle.
• Structure Shelf Pivot Length → controls how strict the structure shelf reference is.
• Decision Reach ATR → controls how close price must be to the active point before review.
• Decision Zone Half-Width ATR → controls the vertical size of the decision zone.
• Target Room and Invalidation Inputs → define room quality and balanced risk distance.
• Visual Settings → control zones, shelves, corridor, labels, panel location, panel theme, and font sizes.
🖥️ Interface & Visual Design
The interface is intentionally chart-first.
The script uses one active decision zone, one invalidation shelf, and one target-room corridor instead of filling the chart with many competing zones. Labels are compact, offset away from candles, and controlled with cooldown and maximum-visible settings.
The panel follows the AGPro publication layout with a single merged blue title row, adjustable location, adjustable theme, and adjustable font size.
🧪 Practical Usage Workflow
1. Read the panel state and Decision Score.
2. Check the active decision zone and zone type.
3. Evaluate the reaction label and candle behavior.
4. Compare target-room corridor and invalidation shelf.
5. Treat alerts as review markers and confirm the broader market context.
🔍 Interpretation Guidelines
A higher Decision Score means the active decision point has stronger alignment inside the script's rule set. It does not mean price must move in the planned direction.
ACTION REVIEW means the area deserves attention, not automatic execution.
WAIT REACTION means the location may be important but the reaction is not complete.
REJECTED means the active invalidation shelf was crossed in this rule set.
🚫 What This Script Is NOT
• Not a prediction engine.
• Not financial advice.
• Not auto trading.
• Not guaranteed signals.
• Not a buy/sell signal service.
• Not a generic support/resistance zone map.
• Not an order-block or FVG scanner.
⚠️ Limitations & Transparency
Decision quality depends on the selected lookback, pivot length, ATR behavior, volume reliability, and timeframe.
Different markets can produce different reference behavior. High volatility can widen invalidation distance. Low volatility can compress target room. Small timeframes may produce more frequent state changes.
The script is rule-based and should be interpreted as an analytical planning layer inside broader market context.
🧠 Market Context Notes
A decision point is useful only when it connects location, reaction, risk, and room.
The same visual area can be weak if reaction is poor, volume is absent, target room is blocked, or invalidation is too tight or too wide.
This script organizes those checks into one readable decision layer.
🧾 Use Case Examples
When price pulls back toward the decision zone and the panel moves from WAIT REACTION to ACTION REVIEW, the area may deserve closer review.
When price touches the zone but the panel shows Room Limited, the user can recognize that the nearby path is obstructed.
When price crosses the invalidation shelf, the script marks the active decision point as rejected inside its rule set.
🧱 System Philosophy
Decision Point Planner follows the AGPro decision-engine approach:
Context first.
Risk before reaction.
Room before confidence.
Attention markers instead of promises.
🔐 Non-Promise Statement
No script can guarantee direction, continuation, reversal, or outcome.
This tool provides structured chart context only.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own analysis, risk controls, position sizing, and trading decisions.
This script does not provide financial advice, investment advice, or guaranteed trading outcomes.
📚 Educational Note
Use the script to study how decision quality changes as price moves closer to or away from active planning references.
The most useful reading comes from comparing the panel state with visible price reaction, room, and invalidation context.
インジケーター
Auto Trendlines MTF - Break/Retest [AGPro Series]Auto Trendlines MTF - Break/Retest
🔹 OVERVIEW
Auto Trendlines MTF - Break/Retest is a multi-timeframe trendline visualization engine that automatically detects and draws the most structurally significant trendlines across three complementary scales: Micro (current timeframe), Meso (intermediate pivots), and Mega (HTF weekly/monthly overlay). Instead of relying on a single pivot scan, the engine builds a ranked candidate pool from each scale and selects the lines that best represent the active market structure around current price.
The script is designed as a pure analytical visualization tool — it does not generate trading decisions, forecasts, or directional recommendations. Its purpose is to give the chart a clean, hand-drawn-quality trendline layer that updates automatically as new pivots form.
🎯 UNIQUE EDGE
Most auto-trendline tools scan one timeframe and draw whatever fits. This engine operates differently in four specific ways:
• Three-scale MTF engine. Micro pivots on the current TF, Meso pivots with wider sensitivity, and Mega trendlines derived from Weekly/Monthly HTF pivots are computed independently and rendered together with a visual hierarchy (Mega dominant, Meso intermediate, Micro active).
• Log-space geometry. All trendline math runs in log-price space, so long-dated diagonals on volatile assets (crypto, growth stocks) do not distort visually when the chart is viewed in logarithmic mode.
• Touch-weighted ranking with violation penalty. Each candidate line is scored by touch count, line age, slope sanity, price proximity, and intra-line violations. Weak geometry, over-sloped lines, and frequently violated lines are demoted automatically.
• Q quality score (0–100) and confluence tags (x2/x3). Every drawn line carries a Q score that blends touches, freshness, geometry, relevance, and violations into a single number. Confluence tags surface when a Micro line and a Meso line sit within the same ATR band near price, highlighting multi-scale structure overlap.
🧠 METHODOLOGY
1. Pivot detection. Separate pivot streams are maintained for Micro (tight sensitivity), Meso (wider sensitivity), and Mega (HTF pivots via request.security).
2. Candidate generation. For each scale, the engine pairs anchor pivots with subsequent pivots to form line candidates, discards over-sloped ones, and computes touches, violations, and break status in log space.
3. Ranking. Candidates are scored by a weighted combination of touch count, time span, slope sanity, relevance to current price (distance in ATR), and violation count. The best non-duplicate lines are kept per scale.
4. Clutter guards. A minimum ATR separation rule prevents near-duplicate lines from stacking. Smart Focus hides far-from-price lines in Minimal/Balanced density modes to keep the chart readable.
5. Stability mode. In Locked mode, selected lines persist bar-to-bar and are only replaced when they break or fall out of the candidate pool — reducing visual repainting on lower TFs.
6. Break/Retest detection. Once a line is drawn, the engine tracks close-based breaks (with configurable tolerance) and subsequent retests within a time window, emitting labeled signals on TF ≤ 1D.
⚙️ SIGNALS & ALERTS
Break and retest events are plotted for each scale with short ASCII tags:
• µR / µS = Micro Resistance / Support break
• mR / mS = Meso Resistance / Support break
• MR / MS = Mega Resistance / Support break
• rµ / rm / rM = retest on Micro / Meso / Mega respectively
A dedicated alertcondition is exposed for every break and retest event, plus two aggregate alerts (Any BR, Any RT) for users who prefer a single alert stream. A Min Q filter lets the user suppress low-quality signals.
🛠️ KEY INPUTS
• Profile Mode. Auto by Timeframe or Manual (Clean Trader, Balanced, Analyst, Presentation, Custom).
• Density Override. Minimal, Balanced, or Bold visual density.
• Line Weight Override. UltraThin, Thin, or Normal.
• Labels / Signals / Stability / Broken-line behavior. All individually overridable.
• Mega Overlay. Full (lines + cloud + label), Lines Only, or Off.
• Advanced panels. Micro Engine, Meso Engine, Mega Engine, Ranking, Visuals, and Signals each expose their own fine-tuning controls for experienced users.
• HUD. Position, theme (Classic Gray, Premium Accent, Color Coded, Showcase), and text size.
📘 HOW TO USE
• Add the script to any liquid symbol and start on a 1H or 4H chart.
• Leave Profile Mode on "Auto by Timeframe" for a balanced default that adapts to the active TF.
• Read the HUD in the top-right corner to see the active profile, how many Micro/Meso lines are drawn, whether Mega is active, and current Q scores.
• When a line carries a Q score above ~65 and a Conf tag (x2 or x3) appears nearby, that zone is a multi-scale structural pocket — use it as a planning reference, not as a trade trigger on its own.
• Use the Break/Retest tags for situational awareness around drawn lines; combine with your own confirmation logic before acting.
⚠️ LIMITATIONS & TRANSPARENCY
• Lines are drawn from historical pivots and can only confirm after a pivot is established. The engine avoids repainting in Locked mode but cannot predict future pivots.
• Q scores and confluence tags describe structural quality, not directional probability. A high-Q line can still break.
• Mega lines depend on HTF pivot availability; on very young symbols or thin charts, Mega may fall back to a Macro-pivot source or remain hidden.
• The script is published as Public, Open Source so that every ranking rule, weight, and threshold is fully auditable in the source code.
🛡️ RISK DISCLOSURE
This script is a visualization and analysis tool only. It is not financial advice, not a trading strategy, and not a signal service. No performance claims are made or implied. Past structural behavior of trendlines does not guarantee future behavior. All trading decisions, risk sizing, and execution remain the sole responsibility of the user. インジケーター
HH/HL/LH/LL Structure Tracker [AGPro Series]HH/HL/LH/LL Structure Tracker
🔹 Overview
HH/HL/LH/LL Structure Tracker automatically classifies every confirmed swing on your chart using pure Dow Theory — the original price-action framework that precedes and underlies every modern market-structure methodology. Each pivot high is labeled as a Higher High (HH) or Lower High (LH), and each pivot low as a Higher Low (HL) or Lower Low (LL). The sequence of the last four swings derives a live trend state: Bullish, Bearish, or Ranging.
No oscillators. No lagging averages. Just the raw geometry of price.
💎 What Makes This Different
While most "market structure" indicators focus on Break-of-Structure or Change-of-Character logic layered with Smart Money terminology, this script returns to the foundation: the four-swing classification that Charles Dow documented over a century ago. The result is an uncluttered, universally readable overlay that communicates structural context at a glance — regardless of which higher-level methodology you apply next (SMC, Wyckoff, Elliott, or classical technical analysis).
Key differentiators versus generic HH/HL scripts on the public library:
• Live structure range zone that dynamically recolors with the trend state (bullish teal, bearish pink, ranging amber).
• Bull Streak and Bear Streak counters — a quantifiable measure of trend persistence (e.g. "3 consecutive HH-HL swings").
• Semantic break classification: the panel distinguishes a continuation break (HH or LL broken in trend direction) from a reversal break (LH or HL broken against the prior structure).
• Progressive label offset algorithm: when several same-type swings cluster without an intervening opposite swing, each subsequent label is offset further from price, eliminating the overlap that plagues most swing scripts on fast-moving charts.
• AGPro design language: premium info panel, adjustable font size and theme, and a disciplined color palette.
🧠 Methodology
1. Pivot detection. A confirmed swing high is a bar whose high exceeds the preceding and following N bars (N = Pivot Length, default 5). Confirmed swing lows mirror the rule. Confirmation occurs N bars after the pivot bar, never repaints.
2. Swing classification. Each new confirmed high is compared to the previous confirmed high. If greater, it is HH; if lesser, LH. Lows are compared to the previous low: greater means HL, lesser means LL.
3. Trend derivation. If the most recent high is HH and the most recent low is HL, the trend state is Bullish. If LH and LL, Bearish. Any mixed sequence (HH + LL, LH + HL) returns Ranging.
4. Structure range zone. A rectangle is drawn between the most recent swing high and most recent swing low. The zone is always current: as new swings confirm, the zone updates in place. Zone color tracks the trend state.
5. Structure break. A close above the most recent swing high (or below the most recent swing low) fires a break event. The type of swing broken is reported — breaking an LH or HL typically precedes a trend reversal; breaking an HH or LL typically signals continuation.
📊 Signals & Alerts
Three optional alert types are available, each using "once per bar close" frequency to prevent intrabar noise:
• New Higher High confirmed — fires when a fresh HH is classified.
• New Lower Low confirmed — fires when a fresh LL is classified.
• Structure break — fires on a close outside the current structure range, labeled as either (reversal signal) or (continuation).
The live info panel reports: Trend state, Bull Streak, Bear Streak, Last High (with type and price), and Last Break (with type and price).
⚙️ Key Inputs
• Pivot Length — sensitivity of swing detection (2 to 50). Lower values capture minor structure; higher values isolate major swings only. Typical: 3–8 intraday, 5–15 swing trading.
• Max Visible Labels — caps the number of historical labels kept on the chart to preserve a premium uncluttered look.
• Label & Panel Font Size — five sizes from Tiny to Huge, default Normal.
• Label Distance from Price (ATR) — base vertical offset of labels from pivot candles.
• Structure Range Zone — toggle, transparency, and border.
• Trend Background Tint — subtle bullish or bearish chart shading.
• Info Panel — toggle, location (six positions), and theme (Dark or Light).
• Alerts — independent toggles for new HH, new LL, and structure break.
🎯 How to Use
Context tool, not a standalone signal generator. Use the trend state to filter entries from your primary methodology: take long setups only while Trend is Bullish and Bull Streak is building, or vice versa. The structure range zone highlights the active battleground between buyers and sellers — trades taken inside the zone are counter-trend by definition, trades taken on a decisive break of the zone align with the emerging new trend.
Reversal breaks (LH or HL broken) are high-information events — they are often the first objective signal that a prevailing trend is losing conviction, ahead of any moving-average cross or momentum divergence. Continuation breaks (HH or LL broken) are confirmation events that validate staying with the trend.
Works on all markets and all timeframes. Particularly effective on liquid instruments with clear structural rhythm: major crypto pairs, FX majors, index futures, and large-cap equities.
⚠️ Limitations & Transparency
• Pivot confirmation requires N bars after the swing; the most recent unconfirmed swing is never labeled.
• In low-volatility sideways regimes, pivot clustering is inevitable — the Pivot Length input should be raised to filter noise on ranging charts.
• The trend state is derived from only the last two swings; it does not account for higher-timeframe context. Pair with a higher-timeframe version of the same script for multi-timeframe confluence.
• Does not provide entry, stop, or target levels. It is a structural framework, not a complete trading system.
📌 Risk Disclosure
This indicator is for educational and analytical purposes only. It does not constitute financial advice, a trading recommendation, or a guarantee of future performance. All trading involves risk of loss. Past structural patterns do not guarantee future outcomes. Always conduct your own due diligence and use appropriate risk management. インジケーター
AG Pro Pivot Cluster Survival Map [AGPro Series]AG Pro Pivot Cluster Survival Map
Overview / What it does
AG Pro Pivot Cluster Survival Map is an overlay tool that evaluates the durability of nearby pivot clusters rather than focusing on a single pivot reaction. The script groups Daily, Weekly, and Monthly Classic Pivot levels when they compress into the same price neighborhood, then measures how well that cluster has held up under repeated interaction.
The goal is not to label every pivot touch as strong or weak. The goal is to show whether a pivot-derived zone has continued to absorb pressure, remain structurally relevant, or lose stability over time. This makes the script suitable for users who want to monitor confluence-based pivot structure instead of isolated one-bar reactions.
The visual model is intentionally compact. The script highlights the nearest upper cluster and the nearest lower cluster, assigns a survival score to each side, and displays a pressure readout for the dominant active zone. The result is a map of pivot-cluster durability, not a generic support/resistance overlay and not a simple reaction detector.
Unique Edge
The distinguishing feature of this script is its focus on pivot-cluster survival.
Many pivot tools concentrate on one level at a time. Many reaction tools classify the immediate response after a touch, reclaim, or rejection. This script approaches the problem differently. It asks whether multiple pivot levels from different higher timeframes are compressing into the same zone, and whether that zone is still surviving repeated market interaction.
That difference matters.
This script does not score a single bounce. It does not try to predict a reversal from one isolated pivot event. It evaluates whether a pivot cluster remains durable after tests, inside-zone pressure, breaches, and time spent without structural failure.
Within the AG Pro catalog, this script is materially different from AG Pro Pivot Points Reaction Map. Pivot Points Reaction Map is centered on reaction quality at pivot levels. Pivot Cluster Survival Map is centered on cluster durability, confluence density, and survival under pressure. In other words, one evaluates the response; the other evaluates the staying power of the pivot cluster itself.
It is also different from broader level-survival or support/resistance tools because the source engine here is explicitly pivot-derived. The script is built around Daily, Weekly, and Monthly Classic Pivot families, then transformed into a confluence-survival framework.
Methodology
The current version uses Classic Pivot calculations from higher timeframes.
1. Daily, Weekly, and Monthly pivot levels are collected.
2. Nearby pivot levels are grouped into clusters when they fall within the active cluster width.
3. The script selects the nearest upper cluster and the nearest lower cluster relative to current price.
4. Each selected cluster is evaluated with a survival model.
The survival model is based on factors such as:
- cluster density
- higher-timeframe participation
- repeated tests
- rejection behavior
- inside-zone pressure
- breach frequency
- time since structural failure
A higher survival score suggests that the cluster has remained more durable under recent interaction. A higher pressure reading suggests that the cluster is experiencing more structural stress.
The chart display is intentionally selective. Instead of plotting every pivot line independently, the script concentrates on the nearest relevant clusters and presents them as zones with a backbone line and state label. This is designed to keep the structure readable.
States / Signals
The script uses state-based interpretation rather than directional promises.
Typical state classifications include:
- Stable
- Strengthening
- Balanced
- Under Stress
- Fragile
- Failed
These states are derived from the relationship between survival and pressure. They are meant to describe the condition of the cluster, not to issue a guaranteed trading outcome.
The panel summarizes:
- nearest upper cluster
- nearest lower cluster
- dominant survival side
- cluster pressure
- pivot mix currently included in the model
The script can also generate alert conditions for:
- cluster strengthening
- cluster failure
- cluster reclaim behavior
These alerts are deterministic conditions derived from the script logic. They are informational and should be interpreted within a broader market workflow.
Key Inputs
Pivot Formula
This version is intentionally limited to Classic Pivots in order to keep the clustering and scoring model consistent.
Include Daily / Weekly / Monthly
These settings control which higher-timeframe pivot families are included in the cluster engine.
Cluster ATR Width
Controls how aggressively nearby pivot levels are merged into the same cluster using ATR-based spacing.
Cluster Percent Width
Adds a percentage-based width floor so clusters remain practical across different price scales.
Minimum Levels Per Cluster
Controls how many pivot levels are required before a true cluster is recognized.
Survival Lookback
Defines the observation window used for the durability calculations.
Visual Controls
The script includes settings for cluster visibility, labels, backbone lines, panel location, and font sizes.
Limitations & Transparency
This script is a structural reading tool. It is not a prediction engine.
A high survival score does not guarantee that price will reverse, hold, or trend from that area. A low survival score does not guarantee immediate failure. The values should be read as condition metrics for pivot-derived zones.
Because the script groups pivot levels into clusters, output can vary depending on volatility, symbol characteristics, and timeframe context. On some symbols, one side may show a stronger cluster than the other. On some charts, one side may temporarily rely on a weaker fallback anchor when cluster density is limited.
This script does not attempt to replace market structure analysis, higher-timeframe context, liquidity analysis, or risk management. It is intended to organize pivot confluence into a readable survival framework.
What this script is not:
- not a buy/sell signal engine
- not a guarantee of support or resistance
- not a standalone trade system
- not a future-price prediction model
Risk Disclosure
This script is for chart analysis and decision support only. It does not provide financial, investment, or trading advice. Markets can move unpredictably, and no indicator can eliminate risk.
Users should evaluate signals, states, and cluster conditions together with their own process, timeframe alignment, and risk controls before making any decision.
インジケーター
AG Pro Pivot Points Reaction Map [AGPro Series]AG Pro Pivot Points Reaction Map
Overview / What it does
AG Pro Pivot Points Reaction Map is an overlay indicator designed to analyze how price behaves around classical pivot levels rather than only plotting those levels as static horizontal references. The script builds Daily or Weekly pivot structures from prior period OHLC data and then tracks the currently active pivot in order to highlight nearby price interaction, reaction quality, and short-term context.
Instead of treating every pivot line equally at all times, the script uses an active-pivot framework. This allows the chart to stay focused on the level that is currently most relevant to price while still keeping broader pivot structure visible in the background. The goal is to help traders evaluate whether price is reacting constructively, rejecting, reclaiming, compressing, or losing a key pivot area.
The visual design is intentionally split into two layers. The first layer is the classical pivot structure itself, including PP, R1, S1, and optional extended levels such as R2 and S2. The second layer is the reaction map built around the active pivot. This layer adds an ATR-based reaction zone, state detection, filtered event labeling, active context tags, and an information panel so the chart can communicate more than a simple “price above” or “price below” condition.
This indicator is intended for chart analysis, workflow support, and structured market reading. It does not attempt to predict future prices, and it should not be interpreted as a standalone trade execution system. It is best used as a contextual overlay that helps organize price behavior around widely followed pivot references.
Unique Edge
The core distinction of this script is that it is not just another pivot plotting tool. Classical pivot indicators usually stop at drawing levels. This script continues one step further by evaluating reaction behavior around the currently active level.
Its main differentiator is the active reaction framework. The script identifies a current pivot focus, builds a dynamic reaction zone around that level, and then classifies price interaction into states such as reclaim, loss, holding behavior, rejection behavior, and compression near pivot. This moves the indicator away from passive level display and toward structured price-context mapping.
A second differentiator is the sticky active pivot logic. Instead of shifting focus too aggressively whenever price becomes marginally closer to a different level, the script attempts to keep chart attention anchored to the current active pivot until conditions justify a transition. This improves visual continuity and makes the chart easier to read during multi-bar interaction.
A third differentiator is signal hygiene. Reaction labels can be filtered through cooldown logic, score thresholds, and event selection rules so that the chart remains readable. Major events can be emphasized while weaker or more repetitive reactions remain in the background. This helps preserve interpretability instead of overwhelming the screen with every minor touch.
Finally, the script combines chart-side cues with a compact state panel. The panel reports the active pivot, pivot price, current distance, live state, last score, and directional bias. This allows users to scan the present context without losing the full visual relationship on the chart.
Methodology
The pivot engine uses prior Daily or Weekly OHLC values to construct standard pivot levels. These levels form the structural base of the indicator. Depending on settings, the script can display the central pivot point together with first and second resistance/support layers.
From that structure, the script evaluates which pivot is currently most relevant to price and assigns that level as the active pivot. A sticky selection process is then used so the active focus does not rotate too easily on minor fluctuations. This helps the script behave more like a context map and less like a constantly flickering nearest-line tracker.
Around the active pivot, the script builds a reaction zone using ATR. This means the mapped zone adapts to the instrument’s recent volatility rather than using a fixed absolute distance. A wider volatility environment naturally leads to a wider interaction zone, while a calmer environment keeps the zone tighter.
Inside that zone, the script studies price behavior using a combination of position relative to the pivot, candle body structure, wick emphasis, and short-term displacement from the level. It also computes a reaction score designed to quantify how constructive or decisive the interaction appears under the script’s logic. Stronger reclaim or rejection characteristics can therefore stand out from weaker, noisier touches.
The result is a layered read of market structure:
- classical pivot references define the environment,
- the active pivot identifies current relevance,
- the ATR-based zone frames the interaction area,
- event logic classifies notable reactions,
- the panel summarizes the current state.
Signals & Alerts
The script can identify and label several reaction types around the active pivot. Depending on settings and score thresholds, these may include reclaim events, pivot loss events, reaction holding behavior, and reaction rejection behavior.
In addition to chart labeling, the script includes alert conditions for major workflow events. These are designed to notify the user when price is showing a notable interaction around the active pivot. Available alert categories include bullish reaction confirmation, bearish reaction confirmation, pivot loss confirmation, compression near pivot, and active pivot changes.
Because this is a contextual indicator rather than a complete strategy, alerts should be interpreted as informational events. They are intended to help users monitor evolving price behavior around important pivot areas, not to replace independent analysis, execution rules, or risk management.
Key Inputs
Pivot Anchor
Selects whether the pivot structure is built from Daily or Weekly source data.
Show R2 / S2
Allows the extended pivot structure to remain visible for users who want broader context beyond PP, R1, and S1.
Base Pivot Line Width / Active Pivot Line Width
Controls the visual hierarchy between background pivot references and the currently active pivot.
Reaction Zone (ATR Multiplier)
Defines the width of the active reaction zone relative to recent volatility.
Wick Emphasis
Adjusts how strongly wick behavior contributes to reaction interpretation.
Signal Cooldown (Bars)
Prevents labels and events from clustering too tightly during noisy price interaction.
Show Reaction Labels / Label Mode / Minimum Label Score
Controls which reaction labels appear on the chart and how selective the script should be.
Focus Mode
Adjusts how aggressively non-active pivot lines fade into the background.
Reaction Label Size
Changes the chart label size for reaction events and edge tags.
Show Event Markers / Show Active Pivot Halo / Show Right Edge Active Tag
Controls optional visual layers that can make the active structure easier to follow.
Passive Context Tags
Adds simplified right-edge tags for passive pivot references so faded background levels remain interpretable.
Show Info Panel / Panel Position / Panel Theme / Panel Font Size
Configures the summary panel to match user preference and chart layout.
Limitations & Transparency
This script is based on classical pivot concepts and volatility-adjusted reaction mapping. It does not know future price direction, and it does not forecast whether any pivot will hold or fail before price interacts with that area.
Reaction labels and scores are formula-driven representations of the script’s internal logic. They are not objective truth statements about market intent, and they should not be interpreted as guaranteed support, guaranteed resistance, or guaranteed continuation/reversal behavior.
Like all level-based overlays, the script can produce different impressions depending on the selected timeframe, instrument volatility, and chart conditions. Fast-moving instruments, low-liquidity environments, and sudden news-driven candles may reduce the practical value of any fixed structural framework, including pivots.
The active pivot model is intentionally selective. That improves chart focus, but it also means the script emphasizes one current pivot context over other simultaneously visible levels. Users who want a broader or more aggressive level-tracking style may prefer different settings than the default configuration.
The indicator is also not a backtesting engine and does not provide complete entry, exit, stop, or position sizing logic. It should therefore be used as one analytical component within a broader decision process.
Risk Disclosure
This indicator is for analytical and educational use only. It does not provide investment advice, trading advice, or financial advice.
Markets involve risk. Price can move through pivot levels without respecting them, reaction quality can deteriorate quickly, and conditions that appear constructive on one bar can fail on the next. No indicator can remove uncertainty from live markets.
Users should evaluate this script together with their own market framework, timeframe selection, execution process, and risk controls. Decisions involving capital should never rely on a single indicator, label, panel reading, or alert event in isolation. インジケーター
BRAYITAN S/R Horizontal BRAYITAN S/R Horizontal — Indicator Description
This is a multi-timeframe Support & Resistance indicator for TradingView, written in Pine Script v5. Here's a full breakdown:
What It Does
It automatically detects and draws horizontal support and resistance lines based on pivot highs and lows from two configurable timeframes (default: M5 and M15), directly on your chart regardless of which timeframe you're currently viewing.
Core Features
Pivot Detection
It uses ta.pivothigh and ta.pivotlow with configurable left/right bar lookback to identify significant price turning points on each timeframe via request.security.
Duplicate Filtering
Before storing a new pivot, it checks whether a level already exists within 0.05% proximity — preventing near-identical lines from cluttering the chart.
Touch Counting
Every bar, the script scans all stored levels and increments a touch counter whenever price (high or low) comes within a user-defined tolerance (default 0.1%) of any level. This measures how many times price has respected a level.
Dynamic Line Thickness
Lines automatically thicken based on touch count — 3+ touches adds 1px, 5+ touches adds 2px — visually highlighting the strongest levels.
Strength Symbols
Labels show ⚡ for levels touched 3+ times and 🔥 for 5+ times.
Visuals
Draws up to N lines per timeframe (default 5 each), projected forward on the chart
Labels show: timeframe tag (S/M5, R/M15, etc.), price, touch count, and strength emoji
Fully customizable colors, line style (solid/dotted/dashed), and thickness per timeframe
Background color flashes when price approaches any S/R level (blue for M5, orange for M15)
Alerts
Four alert conditions are built in:
AlertTriggerResistance M5 reachedClose within 0.3% of M5 pivot highSupport M5 reachedClose within 0.3% of M5 pivot lowResistance M15 reachedClose within 0.3% of M15 pivot highSupport M15 reachedClose within 0.3% of M15 pivot low
Practical Use Case
Ideal for scalpers and intraday traders who want to see higher-timeframe (M15) key levels layered over a lower-timeframe (M5) chart, with visual cues about which levels have been tested most — helping prioritize trade entries, stops, and targets around the strongest zones. インジケーター
Liquidity Sweep Rider Institutional HFT Grabber Liquidity Sweep Rider Strategy (Swing Pivot + Volume Filter)
Publication Description:
This is an open-source Pine Script v6 strategy that identifies potential liquidity sweep patterns around confirmed swing highs and lows.
It uses:
Pivot points (ta.pivothigh / ta.pivotlow) to mark historical swing levels where orders (such as stops or pending entries) often cluster.
A volume filter requiring above-average volume (SMA-based with multiplier) on the sweep candle to highlight stronger moves.
Classic sweep logic: price wicks beyond the level but closes back inside, suggesting a possible reversal after liquidity is taken.
Entry rules:
Long: after a downside sweep below a recent swing low (with volume condition).
Short: after an upside sweep above a recent swing high (with volume condition).
Features include:
Optional toggles to enable/disable long/short directions.
ATR-based stop-loss and take-profit (configurable multipliers and risk-reward ratio).
Visual plots for liquidity levels, entry signals, background highlights, and an info table.
Alert conditions for long/short triggers.
Important notes:
This is an educational/example script for backtesting and learning.
Past performance does not indicate future results. Trading involves significant risk of loss — use proper risk management and never risk more than you can afford to lose.
No guarantees of profitability are made. Always test thoroughly on demo accounts before live use.
Customize parameters (pivot lengths, volume multiplier, ATR settings) based on the instrument and timeframe you trade. Works on various markets/timeframes but performs differently depending on liquidity and volatility.
Feel free to fork/modify the code. Feedback and improvements are welcome!
(≈ 3–4 paragraphs, clear, educational, includes risk disclaimer, explains logic + usage without hype.) ストラテジー
インジケーター
Support & Resistance Automated📌 Support and Resistance Automated (Pivot-Based)
Support and Resistance Automated is a lightweight and fully automated indicator that plots key support and resistance levels using pivot highs and pivot lows. It helps traders quickly identify important price reaction zones without manual drawing.
This indicator is especially useful for price-action traders, swing traders, and intraday traders who rely on clean charts and objective levels.
🔍 How It Works
Pivot Highs → Resistance Levels
Pivot Lows → Support Levels
Each detected pivot creates a horizontal dotted line that extends forward, allowing you to observe how price reacts over time.
Once a level is formed, it is kept permanently on the chart — no repainting, no disappearing levels.
⚙️ Customizable Settings
You can easily adjust:
Left & Right Pivot Bars – control how strong a pivot must be
Line Extension Length
Line Width
Support & Resistance Colors
Show / Hide Pivot Highs and Pivot Lows independently
This flexibility allows the indicator to adapt to intraday, swing, or higher-timeframe analysis.
✅ Key Features
✔ Fully automatic support & resistance detection
✔ Based on proven pivot-point logic
✔ No repainting
✔ Clean, minimal chart appearance
✔ Unlimited support & resistance levels
✔ Works on all timeframes & instruments
📈 Best Use Cases
Identifying key demand and supply zones
Planning entries, targets, and stop-losses
Confluence with price action, RSI, moving averages
Breakout and rejection-based strategies インジケーター
インジケーター
Pivot Points Standard w/ Future PivotsPivot Points Standard with Future Projections
This indicator displays traditional pivot point levels with an added feature to project future pivot levels based on the current period's price action.
Key Features:
Multiple Pivot Types: Choose from Traditional, Fibonacci, Woodie, Classic, DM, and Camarilla pivot calculations
Flexible Timeframes: Auto-detect or manually select Daily, Weekly, Monthly, Quarterly, Yearly, and multi-year periods
Future Pivot Projections: Visualize potential pivot levels for the next period based on current price movement
Custom Price Scenarios: Test "what-if" scenarios by entering a custom close price to see resulting pivot levels
Customizable Display: Adjust line styles, colors, opacity, and label positioning for both historical and future pivots
Historical Pivots: View up to 200 previous pivot periods for context
Future Pivot Options:
The unique future pivot feature calculates what the next period's support and resistance levels would be using the current period's High, Low, Open, and either the current price or a custom price you specify for the closing value. Future pivots are displayed with customizable line styles (solid, dashed, dotted) and opacity to distinguish them from historical levels.
Use Cases:
Plan entries and exits based on projected support/resistance
Scenario analysis with custom price targets
Identify key levels before the period closes
Multi-timeframe pivot analysis
Works on all timeframes and instruments. インジケーター
インジケーター
インジケーター
インジケーター
lib_plot_composite_objectsLibrary "lib_plot_composite_objects"
library building on top of lib_plot_objects for composite objects such as Triangles and Polygons. heavily using chart.points
method tostring(this, date_format)
Namespace types: Triangle
Parameters:
this (Triangle)
date_format (simple string)
method tostring(this, date_format)
Namespace types: TriangleFill
Parameters:
this (TriangleFill)
date_format (simple string)
method tostring(this, date_format)
Namespace types: Polygon
Parameters:
this (Polygon)
date_format (simple string)
method tostring(this, date_format)
Namespace types: PolygonFill
Parameters:
this (PolygonFill)
date_format (simple string)
method tostring(this, date_format)
Namespace types: Triangle
Parameters:
this (Triangle )
date_format (simple string)
method tostring(this, date_format)
Namespace types: Polygon
Parameters:
this (Polygon )
date_format (simple string)
method tostring(this, date_format)
Namespace types: TriangleFill
Parameters:
this (TriangleFill )
date_format (simple string)
method tostring(this, date_format)
Namespace types: PolygonFill
Parameters:
this (PolygonFill )
date_format (simple string)
method create_triangle(this, b, c, args)
Namespace types: chart.point
Parameters:
this (chart.point)
b (chart.point)
c (chart.point)
args (LineArgs type from robbatt/lib_plot_objects/32)
method create_triangle(this, c)
Namespace types: D.Line
Parameters:
this (Line type from robbatt/lib_plot_objects/32)
c (chart.point)
method create_polygon(points, args)
Namespace types: chart.point
Parameters:
points (chart.point )
args (LineArgs type from robbatt/lib_plot_objects/32)
method create_polygon(start, others, args)
Namespace types: chart.point
Parameters:
start (chart.point)
others (chart.point )
args (LineArgs type from robbatt/lib_plot_objects/32)
method create_fill(this, fill_color)
Namespace types: Triangle
Parameters:
this (Triangle)
fill_color (color)
method create_fill(this, fill_color)
Namespace types: Polygon
Parameters:
this (Polygon)
fill_color (color)
method create_center_label(this, txt, args, tooltip)
Namespace types: Triangle
Parameters:
this (Triangle)
txt (string)
args (LabelArgs type from robbatt/lib_plot_objects/32)
tooltip (string)
method create_label(this, txt, args, tooltip)
Namespace types: Polygon
Parameters:
this (Polygon)
txt (string)
args (LabelArgs type from robbatt/lib_plot_objects/32)
tooltip (string)
method nz(this, default)
Namespace types: Triangle
Parameters:
this (Triangle)
default (Triangle)
method nz(this, default)
Namespace types: TriangleFill
Parameters:
this (TriangleFill)
default (TriangleFill)
method nz(this, default)
Namespace types: Polygon
Parameters:
this (Polygon)
default (Polygon)
method nz(this, default)
Namespace types: PolygonFill
Parameters:
this (PolygonFill)
default (PolygonFill)
method enqueue(id, item, max)
Namespace types: Triangle
Parameters:
id (Triangle )
item (Triangle)
max (int)
method enqueue(id, item, max)
Namespace types: Polygon
Parameters:
id (Polygon )
item (Polygon)
max (int)
method enqueue(id, item, max)
Namespace types: TriangleFill
Parameters:
id (TriangleFill )
item (TriangleFill)
max (int)
method enqueue(id, item, max)
Namespace types: PolygonFill
Parameters:
id (PolygonFill )
item (PolygonFill)
max (int)
method update(this, a, b, c)
Namespace types: Triangle
Parameters:
this (Triangle)
a (chart.point)
b (chart.point)
c (chart.point)
method update(this, points)
Namespace types: Polygon
Parameters:
this (Polygon)
points (chart.point )
method delete(this)
Namespace types: Triangle
Parameters:
this (Triangle)
method delete(this)
Namespace types: TriangleFill
Parameters:
this (TriangleFill)
method delete(this)
Namespace types: Polygon
Parameters:
this (Polygon)
method delete(this)
Namespace types: PolygonFill
Parameters:
this (PolygonFill)
method delete(this)
Namespace types: Triangle
Parameters:
this (Triangle )
method delete(this)
Namespace types: TriangleFill
Parameters:
this (TriangleFill )
method delete(this)
Namespace types: Polygon
Parameters:
this (Polygon )
method delete(this)
Namespace types: PolygonFill
Parameters:
this (PolygonFill )
method draw(this, ab_args_override, ac_args_override, bc_args_override)
Namespace types: Triangle
Parameters:
this (Triangle)
ab_args_override (LineArgs type from robbatt/lib_plot_objects/32)
ac_args_override (LineArgs type from robbatt/lib_plot_objects/32)
bc_args_override (LineArgs type from robbatt/lib_plot_objects/32)
method draw(this)
Namespace types: Polygon
Parameters:
this (Polygon)
method draw(this)
Namespace types: TriangleFill
Parameters:
this (TriangleFill)
method draw(this)
Namespace types: PolygonFill
Parameters:
this (PolygonFill)
method draw(this)
Namespace types: Triangle
Parameters:
this (Triangle )
method draw(this)
Namespace types: TriangleFill
Parameters:
this (TriangleFill )
method draw(this)
Namespace types: Polygon
Parameters:
this (Polygon )
method draw(this)
Namespace types: PolygonFill
Parameters:
this (PolygonFill )
method apply_style(this, args)
Namespace types: Triangle
Parameters:
this (Triangle)
args (LineArgs type from robbatt/lib_plot_objects/32)
method apply_style(this, args)
Namespace types: Polygon
Parameters:
this (Polygon)
args (LineArgs type from robbatt/lib_plot_objects/32)
method apply_style(this, args)
Namespace types: Triangle
Parameters:
this (Triangle )
args (LineArgs type from robbatt/lib_plot_objects/32)
method apply_style(this, args)
Namespace types: Polygon
Parameters:
this (Polygon )
args (LineArgs type from robbatt/lib_plot_objects/32)
Triangle
Fields:
a (chart.point) : first Corner
b (chart.point) : second Corner
c (chart.point) : third Corner
args (LineArgs type from robbatt/lib_plot_objects/32) : Wrapper for reusable arguments for line.new()
ab (Line type from robbatt/lib_plot_objects/32)
ac (Line type from robbatt/lib_plot_objects/32)
bc (Line type from robbatt/lib_plot_objects/32)
TriangleFill
Fields:
triangle (Triangle) : The Triangle object
plot (LineFill type from robbatt/lib_plot_objects/32) : The linefill object to be added and plotted via draw()
Polygon
Fields:
points (chart.point ) : array of points that make up the Polygon
center (chart.point) : Center point of the Polygon, can be used for a label and will be center for PolygonFill
args (LineArgs type from robbatt/lib_plot_objects/32) : Wrapper for reusable arguments for line.new()
plot (Line type from robbatt/lib_plot_objects/32) : An array of Lines that form Polygon Border
PolygonFill
Fields:
poly (Polygon) : the Polygon
fill_color (series color) : The color used to fill the space between the lines.
plot (TriangleFill ) ライブラリ
インジケーター
インジケーター
