PROTECTED SOURCE SCRIPT
更新済 Directional Flow Index (DFI)

DFI (Directional Flow Index) — SuperTrend-Aware v2 (Synthetic Delta) 는
가격–거래량 공간에서 체결 우위를 근사해 만든 흐름을 누적(CVD 스타일)한 뒤,
고역통과(HP)로 추세 성분을 제거 → Z-Score 정규화 → SuperTrend 체 regime 인식까지 적용하여
추세의 ‘피로도(에너지 고갈)’를 시각화하는 보조지표입니다.
동작 원리
Flow 구성
주요 시그널
활용 팁
한계 및 주의
알림(Alerts)
버전 노트
v2: Synthetic Delta Volume 모드 추가, Regime-aware 색상/알림 개선, 다이버전스(옵션) 보조
크레딧
설계: Cyan_TPM
영감: OBV/CMF/VFI, CVD 철학, Ehlers HP/정규화 기법
[ENG]
DFI (Directional Flow Index) — SuperTrend-Aware v2 (Synthetic Delta)
models buy/sell dominance in the price–volume space, accumulates it CVD-style,
then high-pass detrends → smooths → Z-score normalizes, and finally applies a SuperTrend regime to emphasize alignment.
Goal: visualize trend “fatigue” (energy depletion) rather than mere direction.
How it works
Flow Construction
Signals
Inputs (Suggested)
Usage
Limitations
Alerts
DFI Long Thrust / Short Thrust (zero-line crosses under regime)
Loss of Momentum (Up/Down) via DFI–Signal counter-cross
Version
v2: Synthetic Delta mode added, regime-aware coloring/alerts refined, optional divergence helper
Credits
Design: Cyan_TPM
References: OBV/CMF/VFI, CVD philosophy, Ehlers HP/normalization
가격–거래량 공간에서 체결 우위를 근사해 만든 흐름을 누적(CVD 스타일)한 뒤,
고역통과(HP)로 추세 성분을 제거 → Z-Score 정규화 → SuperTrend 체 regime 인식까지 적용하여
추세의 ‘피로도(에너지 고갈)’를 시각화하는 보조지표입니다.
- 목표: 단순 “상승/하락 강도”가 아니라, 그 추세가 얼마나 지속 가능/피로한지를 정량화
- 핵심: Synthetic Delta(종가의 캔들 내 상대위치)로 매수/매도 우위 비율을 추정 → 거래량에 가중
동작 원리
Flow 구성
- Synthetic Delta Volume: (close - low)/(high - low)로 매수우위 비율을 추정 → [-1,+1] 정규화 → × volume
- 추가 모드: Signed Volume(ΔClose), MFM, ΔPrice×Volume (옵션)
- CVD 스타일 누적 → HP detrend(EMA 기반) → EMA 스무딩
- Z-Score 정규화로 종목/주기 간 스케일 통일
- SuperTrend Regime(옵션)로 색상/알림을 방향 일치 구간에만 강조
주요 시그널
- 0선 돌파: 흐름의 골든/데드 크로스로 추세 재개 신호
- Signal 교차: 모멘텀 약화/회복 탐지 (상승구간에서 하향 교차 = 피로, 하락구간에서 상향 교차 = 피로)
- Regime 일치 강조(컬러): ST가 상방+DFI > 0 또는 하방+DFI < 0 구간을 강조 표시
- 입력(권장값)
- Flow Method: Synthetic Delta Volume (기본)
- Detrend Length (HP): 50 (중기 추세 제거)
- Smoothing EMA: 10
- Z-Score Window: 100
- Signal EMA: 9
- SuperTrend Factor / ATR Length: 6 / 5 (자산 변동성에 맞춰 조정)
활용 팁
- 브레이크아웃 추종: DFI > 0(상방 Regime)에서 0선 상향 돌파 & 시그널 상향 교차 동시 확인
- 익절/리스크 관리: DFI가 양수 유지 중 시그널 하향 교차가 반복되면 피로 누적 가능성 ↑
- 다이버전스(옵션): 가격이 고점 갱신, DFI는 하락 고점 → 상방 피로 / 반대는 하방 피로
한계 및 주의
- 실제 틱 Delta 아님: Synthetic Delta는 근사 모델입니다. 실제 Bid/Ask 체결 데이터 접근이 불가한 TV 환경을 보완하는 방식입니다.
- 파라미터 민감도: HP/Z-윈도우가 너무 짧으면 노이즈, 너무 길면 반응 둔화. 자산/주기에 맞춰 튜닝 필요.
- Regime 필터 이진성: 변곡 구간에서 오탐 가능 → 시그널 교차와 함께 확인 권장.
알림(Alerts)
- DFI Long Thrust: (상방 Regime일 때) 0선 상향 돌파
- DFI Short Thrust: (하방 Regime일 때) 0선 하향 돌파
- Loss of Momentum (Up/Down): DFI와 Signal의 역교차로 모멘텀 약화 감지
버전 노트
v2: Synthetic Delta Volume 모드 추가, Regime-aware 색상/알림 개선, 다이버전스(옵션) 보조
크레딧
설계: Cyan_TPM
영감: OBV/CMF/VFI, CVD 철학, Ehlers HP/정규화 기법
[ENG]
DFI (Directional Flow Index) — SuperTrend-Aware v2 (Synthetic Delta)
models buy/sell dominance in the price–volume space, accumulates it CVD-style,
then high-pass detrends → smooths → Z-score normalizes, and finally applies a SuperTrend regime to emphasize alignment.
Goal: visualize trend “fatigue” (energy depletion) rather than mere direction.
How it works
Flow Construction
- Synthetic Delta Volume (default): use the close’s relative position within the bar range to approximate buy dominance, map to [-1,+1], and weight by volume.
- Alternative modes: Signed Volume (ΔClose), Money Flow Multiplier, ΔPrice×Volume.
- CVD-like Accumulation → HP detrend (EMA-based) → EMA smoothing
- Z-Score Normalization to make values comparable across assets/timeframes
- SuperTrend Regime Awareness to color/alert only when direction aligns
Signals
- Zero-line crosses: thrust (restart) of directional flow
- Signal crosses: momentum loss/recovery (fatigue)
- Regime-aligned coloring: highlights DFI>0 in up regime, DFI<0 in down regim
Inputs (Suggested)
- Flow Method: Synthetic Delta Volume
- Detrend Length (HP): 50
- Smoothing EMA: 10
- Z-Score Window: 100
- Signal EMA: 9
- SuperTrend Factor / ATR Length: 6 / 5 (tune per asset)
Usage
- Breakout follow-through: zero-up cross + signal up cross in up regime
- Risk/TP management: repeated signal-down crosses while DFI > 0 → accumulating fatigue
- (Optional) Divergence: Price HH but DFI LH → upside fatigue; inverse for downside
Limitations
- Not true tick delta: Synthetic Delta approximates orderflow without bid/ask prints.
- Parameter sensitivity (HP/Z windows) → tune for your market.
- Binary regime filter can misfire near turning points → confirm with signal cross.
Alerts
DFI Long Thrust / Short Thrust (zero-line crosses under regime)
Loss of Momentum (Up/Down) via DFI–Signal counter-cross
Version
v2: Synthetic Delta mode added, regime-aware coloring/alerts refined, optional divergence helper
Credits
Design: Cyan_TPM
References: OBV/CMF/VFI, CVD philosophy, Ehlers HP/normalization
リリースノート
[KOR]Fatigue% (추세 피로도)
DFI 절대값의 평균(에너지)과 피크값의 비율로 에너지 소모율(%) 계산.
“현재 추세가 얼마나 소모되었는가”를 0~100%로 표현:
0~30% → Fresh (신선한 추세)
30~60% → Active (정상 지속 구간)
60~80% → Tiring (과열 주의)
80~100% → Exhausted (탈진 상태)
Reset on Regime Change 옵션 추가:
- SuperTrend 추세가 전환되면 Fatigue%를 자동 초기화하여
- 새 추세 구간의 체력만 다시 측정.
- Fatigue%는 EMA 평활 처리 + 피크 Lookback 기반으로 계산.
- 테이블 UI에 실시간 표시 (top-right 기본).
- Fatigue%, Regime, Flow Method 확인 가능.
Fatigue Alert System
Fatigue% 수준 기반 Exhaustion / Freshness 알림 추가:
- Exhaustion Sell → Fatigue% ≥ High & DFI↓
- Exhaustion Buy → Fatigue% ≥ High & DFI↑
- Fresh Thrust Buy/Sell → 피로도가 낮을 때 DFI가 0선 돌파
UI / 구조 개선
Fatigue% 테이블 추가 (좌/우 하단 위치 선택 가능).
Fatigue 색상 자동 강조 (Lime → Orange → Red).
코드 구조 완전 리팩토링:
grp_ 그룹화로 UI 정리.
Fatigue / Flow / ST / Plotting 구간별 모듈화.
Divergence Scanner 유지 (옵션 Off 기본).
[ENG]
Measures how “tired” the current trend is, from 0% (fresh) to 100% (fully exhausted).
Based on the ratio between recent average DFI energy (|DFI| EMA) and its historical peak.
Interpretation:
- 0–30% → Fresh trend
- 30–60% → Active / Sustained phase
- 60–80% → Tiring / Overheated
- 80–100% → Exhausted trend
New option: Reset on Regime Change
When the SuperTrend direction flips, Fatigue% resets — measuring only the current trend’s internal strength.
Smoothed via EMA to prevent volatility spikes.
Real-time Fatigue Table added (top-right by default):
Displays Fatigue%, Regime, and Flow Method.
Fatigue-Based Alert System
Exhaustion Alerts
- Exhaustion Sell: Fatigue% ≥ High & DFI crosses under Signal (Up Regime)
- Exhaustion Buy: Fatigue% ≥ High & DFI crosses over Signal (Down Regime)
Freshness Alerts
- Fresh Thrust Buy/Sell: DFI crosses zero while Fatigue% is low
- Complements the existing DFI Thrust & Momentum Loss signals
UI / Structural Improvements
Introduced a Fatigue Table panel with optional position (top/bottom corners).
Adaptive color palette:
Lime → Orange → Red, matching Fatigue severity.
Fully modularized code:
Grouped inputs (grp_st, grp_flow, grp_fat, etc.).
Clear separation between core logic, normalization, visuals, and alerts.
Divergence scanner retained as optional (disabled by default).
保護スクリプト
このスクリプトのソースコードは非公開で投稿されています。 しかし、無料かつ制限なしでご利用いただけます ― 詳細についてはこちらをご覧ください。
免責事項
これらの情報および投稿は、TradingViewが提供または保証する金融、投資、取引、またはその他の種類のアドバイスや推奨を意図したものではなく、またそのようなものでもありません。詳しくは利用規約をご覧ください。
保護スクリプト
このスクリプトのソースコードは非公開で投稿されています。 しかし、無料かつ制限なしでご利用いただけます ― 詳細についてはこちらをご覧ください。
免責事項
これらの情報および投稿は、TradingViewが提供または保証する金融、投資、取引、またはその他の種類のアドバイスや推奨を意図したものではなく、またそのようなものでもありません。詳しくは利用規約をご覧ください。