INVITE-ONLY SCRIPT
更新済 QaSH DCA Daytrader
This script takes advantage of the power of DCA implemented in the QaSH DCA Algorithm script, and it applies it to new entry conditions. A "Quickfingers Luc" mode has been added, which creates new entry orders whenever a level of support has been identified. If price breaks the support level and quickly drops down, the orders will already be in place to catch the dip. This method can even catch the 1-second long, 50% flash dips that occur in some exchanges.
Settings advice:
- If you think price is inflated, try conservative settings that either use a stoploss and EMA filter, or no stoploss but have some of your orders placed far below the current price with increasing volume. In a bear market this will beat the buy and hold.
- If you think the market is ready for a new bull run, then try experimenting with very aggressive settings to beat the buy and hold. For example: ASAP mode with 3 layers turned on. Orders placed at 0.5%, 3%, and 5%. Volumes at 30%, 30%, and 40% respectively. No stoploss. These settings were tested on ETH and beat the buy and hold during an extreme bull market period.
- Four entry conditions are included in this initial release : ASAP, Quickfingers Luc, Bullish Pivot point, and Bearish Pivot point
- All order placements are customizable
- All take profit % values are based on the average entry price
- Take profit % values can change based on how big the price dip was
- Entry condition filter has been added and it uses a variable timeframe EMA
- Stoploss function is available
- Order size can be sent in the alerts, which allows for multiple setups to be running simultaneously in one account
- All alerts are sent using the new "Any alert() function call" feature, which means this indicator will only take up one alert slot to cover all entry and exit alerts
Settings advice:
- If you think price is inflated, try conservative settings that either use a stoploss and EMA filter, or no stoploss but have some of your orders placed far below the current price with increasing volume. In a bear market this will beat the buy and hold.
- If you think the market is ready for a new bull run, then try experimenting with very aggressive settings to beat the buy and hold. For example: ASAP mode with 3 layers turned on. Orders placed at 0.5%, 3%, and 5%. Volumes at 30%, 30%, and 40% respectively. No stoploss. These settings were tested on ETH and beat the buy and hold during an extreme bull market period.
リリースノート
updated tooltips and default valuesリリースノート
disable ATR plot by defaultリリースノート
-fixed asap mode not resetting when it shouldリリースノート
added new placeholdersupdated tooltips to document the placeholders
リリースノート
Fixed an issue with layers hitting when they shouldn'tリリースノート
prevented ema cross from resetting the layers if you're already in a tradeリリースノート
some logic fixes / improvementsリリースノート
fixed default input text to utilize new placeholderリリースノート
fixed an error that arose from the last updateリリースノート
stoploss to use the open as reference instead of previous closeリリースノート
prevented live data streams from causing some actions to happen multiple times in the same barリリースノート
improved the backtest accuracyリリースノート
improved backtest accuracysimplified ruleset for simulated orders
リリースノート
This update completes the functional additions I plan to add to this script. **SHORT POSITIONS ARE NOW POSSIBLE**
* with this addition, you can now switch to a short position during large market swings (if using a stoploss)
-Long and Short trades operate on two independent, configurabele, multiple timeframe EMA's
-fixed ATR-based TP% updating a bar late
-fixed {{filled_size}} placeholder changing to zero right before sending a "take profit" or "stoploss" alert
-added new warning popups
-added checkbox to disable warning popups
-added several placeholders such as {{LX_size_USD}} which returns the trade size in USD, useful for inverse perpetuals
リリースノート
fixed TP placeholder not updating before sending a layer alert when shortリリースノート
-changed the "bot start" logic for "ASAP" mode. Now, if you pause your alert and then start it again, it will go ahead and start running the first trade. Before, you would have had to change your start time and recreate the alert to get it running again-fixed a hidden plot that was forcing the chart to zoom out
リリースノート
fixed the bounce % input for quickfingers luc entriesリリースノート
After discussions with the Pinescript staff, I decided to remove many references to "barstate.isrealtime" to better align backtest and live trade code.Instead, I've added a "kill switch" that can disable your running alert whenever its execution is interrupted due to server maintenance
- improved the aesthetics of the data table
- fixed "breakeven price" displaying 0 when in a short position
リリースノート
moved "kill switch" checkboxchanged chart picture
リリースノート
added an input for "tick overshoot" requirement to consider limit orders filledchanged "killswitch" error message for clarity
リリースノート
added condition that orders must be placed when the bar closes.added condition that limit orders cannot be considered filled on the same bar as when the orders were placed.
リリースノート
minor edit to how price gaps are handled with simulated ordersリリースノート
fixed a bug that sometimes appeared on higher time frames招待専用スクリプト
こちらのスクリプトにアクセスできるのは投稿者が承認したユーザーだけです。投稿者にリクエストして使用許可を得る必要があります。通常の場合、支払い後に許可されます。詳細については、以下、作者の指示をお読みになるか、ParabolicValueに直接ご連絡ください。
スクリプトの機能を理解し、その作者を全面的に信頼しているのでなければ、お金を支払ってまでそのスクリプトを利用することをTradingViewとしては「非推奨」としています。コミュニティスクリプトの中で、その代わりとなる無料かつオープンソースのスクリプトを見つけられる可能性もあります。
作者の指示
For indicator access:
Patreon: https://www.patreon.com/QaSH
For questions and support:
Discord: https://discord.gg/kahPkedYpD
警告: 招待専用スクリプトへのアクセスをリクエストする前に弊社のガイドをお読みください。
免責事項
これらの情報および投稿は、TradingViewが提供または保証する金融、投資、取引、またはその他の種類のアドバイスや推奨を意図したものではなく、またそのようなものでもありません。詳しくは利用規約をご覧ください。
招待専用スクリプト
こちらのスクリプトにアクセスできるのは投稿者が承認したユーザーだけです。投稿者にリクエストして使用許可を得る必要があります。通常の場合、支払い後に許可されます。詳細については、以下、作者の指示をお読みになるか、ParabolicValueに直接ご連絡ください。
スクリプトの機能を理解し、その作者を全面的に信頼しているのでなければ、お金を支払ってまでそのスクリプトを利用することをTradingViewとしては「非推奨」としています。コミュニティスクリプトの中で、その代わりとなる無料かつオープンソースのスクリプトを見つけられる可能性もあります。
作者の指示
For indicator access:
Patreon: https://www.patreon.com/QaSH
For questions and support:
Discord: https://discord.gg/kahPkedYpD
警告: 招待専用スクリプトへのアクセスをリクエストする前に弊社のガイドをお読みください。
免責事項
これらの情報および投稿は、TradingViewが提供または保証する金融、投資、取引、またはその他の種類のアドバイスや推奨を意図したものではなく、またそのようなものでもありません。詳しくは利用規約をご覧ください。