始めましょう

Bar_types

vidya_calculateLibrary "vidya_calculate" : Calculates the Variable Index Dynamic Average (VIDYA). Computes the VIDYA, which adjusts the degree of smoothing based on the strength of price momentum (absolute value of CMO), and then returns the 15-period(variable) Simple Moving Average (SMA) of that VIDYA. VIDYA tends to follow prices more closely when price fluctuations are large, and is smoothed more when fluctuations are small. CMO = Chande Momentum Oscillator. vidya(src, vidyaLength, vidyaMomentum, vidyaTrendPeriod)   : Calculates the Variable Index Dynamic Average (VIDYA)   Parameters:      src (float) : : Source      vidyaLength (int) : : VIDYA Length      vidyaMomentum (int) : : VIDYA Momentum      vidyaTrendPeriod (int) : : VIDYA Trend Period (Display)   Returns: : the 15-period(variable) Simple Moving Average (SMA) of that VIDYA
Pine Script® ライブラリ
puyotchiの投稿
LibraryDivergenceV6LibraryDivergenceV6 Enhance your trading strategies with LibraryDivergenceV6, a comprehensive Pine Script library designed to simplify and optimize the detection of bullish and bearish divergences across multiple technical indicators. Whether you're developing your own indicators or seeking to incorporate robust divergence analysis into your trading systems, this library provides the essential tools and functions to accurately identify potential market reversals and continuations. Overview LibraryDivergenceV6 offers a suite of functions that detect divergences between price movements and key technical indicators such as the Relative Strength Index (RSI) and On-Balance Volume (OBV). By automating the complex calculations involved in divergence detection, this library enables traders and developers to implement reliable and customizable divergence strategies with ease. Key Features Comprehensive Divergence Detection Bullish Divergence: Identifies instances where the indicator forms higher lows while the price forms lower lows, signaling potential upward reversals. Bearish Divergence: Detects situations where the indicator creates lower highs while the price forms higher highs, indicating possible downward reversals. Overbought and Oversold Conditions: Differentiates between standard and strong divergences by considering overbought and oversold levels, enhancing signal reliability. Multi-Indicator Support RSI (Relative Strength Index): Analyze momentum-based divergences to spot potential trend reversals. OBV (On-Balance Volume): Incorporate volume flow into divergence analysis for a more comprehensive market perspective. Customizable Parameters Pivot Points Configuration: Adjust the number of bars to the left and right for pivot detection, allowing fine-tuning based on different timeframes and trading styles. Range Settings: Define minimum and maximum bar ranges to control the sensitivity of divergence detection, reducing false signals. Noise Cancellation: Enable or disable noise filtering to focus on significant divergences and minimize minor fluctuations. Flexible Usage Exported Functions: Easily integrate divergence detection into your custom indicators or trading strategies with exported functions such as DivergenceBull, DivergenceBear, DivergenceBullOversold, and DivergenceBearOverbought. Occurrence Handling: Specify which occurrence of a divergence to consider (e.g., most recent, previous) for precise analysis. Optimized Performance Efficient Calculations: Designed to handle multiple occurrences and pivot points without compromising script performance. Line Management: Automatically creates and deletes trend lines based on divergence conditions, ensuring a clean and uncluttered chart display.
Pine Script® ライブラリ
naserbossの投稿
COMET_Scanner_Library_FINALLibrary "COMET_Scanner_Library" - A Trader's Edge (ATE)_Library was created to assist in constructing COM Scanners TickerIDs(_string)   TickerIDs: You must form this single tickerID input string exactly as described in the scripts info panel (little gray 'i' that is circled at the end of the settings in the settings/input panel that you can hover your cursor over this 'i' to read the details of that particular input). IF the string is formed correctly then it will break up this single string parameter into a total of 40 separate strings which will be all of the tickerIDs that the script is using in your COM Scanner.   Parameters:      _string (simple string) : (string) A maximum of 40 Tickers (ALL joined as 1 string for the input parameter) that is formulated EXACTLY as described within the tooltips of the TickerID inputs in my COM Scanner scripts: assets = input.text_area(tIDs, title="TickerIDs (MUST READ TOOLTIP)", group=g2, tooltip="Accepts 40 TICKERID's for each copy of the script on the chart. *** MUST FORMAT THIS WAY *** Each FULL tickerID (ie 'Exchange:ticker') must be separated by A SINGLE BLANK SPACE for correct formatting. The blank space tells the script where to break off the ticker to assign it to a variable to be used later in the script. So this input will be a single string constructed from up to 40 tickerID's with a space between each tickerID (ie. 'BINANCE:BTCUSDT BINANCE:SXPUSDT BINANCE:XRPUSDT').", display=display.none)   Returns: Returns 40 output variables in the tuple (ie. between the ' ') with the separated TickerIDs, Locations(_firstLocation)   Locations: This function is used when there's a desire to print an assets ALERT LABELS. A set Location on the scale is assigned to each asset. This is created so that if a lot of alerts are triggered, they will stay relatively visible and not overlap each other. If you set your '_firstLocation' parameter as 1, since there are a max of 40 assets that can be scanned, the 1st asset's location is assigned the value in the '_firstLocation' parameter, the 2nd asset's location is the (1st asset's location+1)...and so on.   Parameters:      _firstLocation (simple int) : (simple int) Optional (starts at 1 if no parameter added). Location that you want the first asset to print its label if is triggered to do so. ie. loc2=loc1+1, loc3=loc2+1, etc.   Returns: Returns 40 variables for the locations for alert labels LabelSize(_barCnt, _lblSzRfrnce)   INVALID TICKERIDs: This is to add a table in the middle right of your chart that prints all the TickerID's that were either not formulated correctly in the '_source' input or that is not a valid symbol and should be changed. LABEL SIZES: This function sizes your Alert Trigger Labels according to the amount of Printed Bars the chart has printed within a set time period, while also keeping in mind the smallest relative reference size you input in the 'lblSzRfrnceInput' parameter of this function. A HIGHER % of Printed Bars(aka...more trades occurring for that asset on the exchange), the LARGER the Name Label will print, potentially showing you the better opportunities on the exchange to avoid exchange manipulation liquidations. *** SHOULD NOT be used as size of labels that are your asset Name Labels next to each asset's Line Plot... if your COM Scanner includes these as you want these to be the same size for every asset so the larger ones dont cover the smaller ones if the plots are all close to each other ***   Parameters:      _barCnt (float) : (float) Get the 1st variable('barCnt') from the Security function's tuple and input it as this functions 1st input parameter which will directly affect the size of the 2nd output variable ('alertTrigLabel') that is also outputted by this function.      _lblSzRfrnce (string) : (string) Optional (if parameter not included, it defaults to size.small). This will be the size of the variable outputted by this function named 'assetNameLabel' BUT also affects the size of the output variable 'alertTrigLabel' as it uses this parameter's size as the smallest size for 'alertTrigLabel' then uses the '_barCnt' parameter to determine the next sizes up depending on the "_barCnt" value.   Returns: ( ) Returns 2 variables: 1st output variable ('AssetNameLabel') is assigned to the size of the 'lblSzRfrnceInput' parameter. 2nd output variable('alertTrigLabel') can be of variying sizes depending on the 'barCnt' parameter...BUT the smallest size possible for the 2nd output variable ('alertTrigLabel') will be the size set in the 'lblSzRfrnceInput' parameter. InvalidTickerIDs(_close, _securityTickerid, _invalidArray, _tablePosition, _stackVertical)   Parameters:      _close (float)      _securityTickerid (string)      _invalidArray (array)      _tablePosition (simple string)      _stackVertical (simple bool) PrintedBarCount(_time, _barCntLength, _barCntPercentMin)   The Printed BarCount Filter looks back a User Defined amount of minutes and calculates the % of bars that have printed out of the TOTAL amount of bars that COULD HAVE been printed within the same amount of time.   Parameters:      _time (int) : (int) The time associated with the chart of the particular asset that is being screened at that point.      _barCntLength (int) : (int) The amount of time (IN MINUTES) that you want the logic to look back at to calculate the % of bars that have actually printed in the span of time you input into this parameter.      _barCntPercentMin (int) : (int) The minimum % of Printed Bars of the asset being screened has to be GREATER than the value set in this parameter for the output variable 'bc_gtg' to be true.   Returns: ( ) Returns 2 outputs: 1st is the % of Printed Bars that have printed within the within the span of time you input in the '_barCntLength' parameter. 2nd is true/false according to if the Printed BarCount % is above the threshold that you input into the '_barCntPercentMin' parameter.
Pine Script® ライブラリ
A_Traders_Edgeの投稿
COM_Scanner_LibraryLibrary "COM_Scanner_Library" - A Trader's Edge (ATE)_Library was created to assist in constructing COM Scanners TickerIDs(_string)   TickerIDs: You must form this single tickerID input string exactly as described in the scripts info panel (little gray 'i' that is circled at the end of the settings in the settings/input panel that you can hover your cursor over this 'i' to read the details of that particular input). IF the string is formed correctly then it will break up this single string parameter into a total of 40 separate strings which will be all of the tickerIDs that the script is using in your COM Scanner.   Parameters:      _string (simple string) : (string) A maximum of 40 Tickers (ALL joined as 1 string for the input parameter) that is formulated EXACTLY as described within the tooltips of the TickerID inputs in my COM Scanner scripts: assets = input.text_area(tIDs, title="TickerIDs (MUST READ TOOLTIP)", group=g2, tooltip="Accepts 40 TICKERID's for each copy of the script on the chart. *** MUST FORMAT THIS WAY *** Each FULL tickerID (ie 'Exchange:ticker') must be separated by A SINGLE BLANK SPACE for correct formatting. The blank space tells the script where to break off the ticker to assign it to a variable to be used later in the script. So this input will be a single string constructed from up to 40 tickerID's with a space between each tickerID (ie. 'BINANCE:BTCUSDT BINANCE:SXPUSDT BINANCE:XRPUSDT').", display=display.none)   Returns: Returns 40 output variables in the tuple (ie. between the ' ') with the separated TickerIDs, Locations(_firstLocation)   Locations: This function is used when there's a desire to print an assets ALERT LABELS. A set Location on the scale is assigned to each asset. This is created so that if a lot of alerts are triggered, they will stay relatively visible and not overlap each other. If you set your '_firstLocation' parameter as 1, since there are a max of 40 assets that can be scanned, the 1st asset's location is assigned the value in the '_firstLocation' parameter, the 2nd asset's location is the (1st asset's location+1)...and so on.   Parameters:      _firstLocation (simple int) : (simple int) Optional (starts at 1 if no parameter added). Location that you want the first asset to print its label if is triggered to do so. ie. loc2=loc1+1, loc3=loc2+1, etc.   Returns: Returns 40 variables for the locations for alert labels LabelSize(_barCnt, _lblSzRfrnce)   INVALID TICKERIDs: This is to add a table in the middle right of your chart that prints all the TickerID's that were either not formulated correctly in the '_source' input or that is not a valid symbol and should be changed. LABEL SIZES: This function sizes your Alert Trigger Labels according to the amount of Printed Bars the chart has printed within a set time period, while also keeping in mind the smallest relative reference size you input in the 'lblSzRfrnceInput' parameter of this function. A HIGHER % of Printed Bars(aka...more trades occurring for that asset on the exchange), the LARGER the Name Label will print, potentially showing you the better opportunities on the exchange to avoid exchange manipulation liquidations. *** SHOULD NOT be used as size of labels that are your asset Name Labels next to each asset's Line Plot... if your COM Scanner includes these as you want these to be the same size for every asset so the larger ones dont cover the smaller ones if the plots are all close to each other ***   Parameters:      _barCnt (float) : (float) Get the 1st variable('barCnt') from the Security function's tuple and input it as this functions 1st input parameter which will directly affect the size of the 2nd output variable ('alertTrigLabel') that is also outputted by this function.      _lblSzRfrnce (string) : (string) Optional (if parameter not included, it defaults to size.small). This will be the size of the variable outputted by this function named 'assetNameLabel' BUT also affects the size of the output variable 'alertTrigLabel' as it uses this parameter's size as the smallest size for 'alertTrigLabel' then uses the '_barCnt' parameter to determine the next sizes up depending on the "_barCnt" value.   Returns: ( ) Returns 2 variables: 1st output variable ('AssetNameLabel') is assigned to the size of the 'lblSzRfrnceInput' parameter. 2nd output variable('alertTrigLabel') can be of variying sizes depending on the 'barCnt' parameter...BUT the smallest size possible for the 2nd output variable ('alertTrigLabel') will be the size set in the 'lblSzRfrnceInput' parameter. InvalidTickerIDs(_close, _securityTickerid, _invalidArray, _tablePosition, _stackVertical)   Parameters:      _close (float)      _securityTickerid (string)      _invalidArray (array)      _tablePosition (simple string)      _stackVertical (simple bool) PrintedBarCount(_time, _barCntLength, _barCntPercentMin)   The Printed BarCount Filter looks back a User Defined amount of minutes and calculates the % of bars that have printed out of the TOTAL amount of bars that COULD HAVE been printed within the same amount of time.   Parameters:      _time (int) : (int) The time associated with the chart of the particular asset that is being screened at that point.      _barCntLength (int) : (int) The amount of time (IN MINUTES) that you want the logic to look back at to calculate the % of bars that have actually printed in the span of time you input into this parameter.      _barCntPercentMin (int) : (int) The minimum % of Printed Bars of the asset being screened has to be GREATER than the value set in this parameter for the output variable 'bc_gtg' to be true.   Returns: ( ) Returns 2 outputs: 1st is the % of Printed Bars that have printed within the within the span of time you input in the '_barCntLength' parameter. 2nd is true/false according to if the Printed BarCount % is above the threshold that you input into the '_barCntPercentMin' parameter.
Pine Script® ライブラリ
A_Traders_Edgeの投稿
CandleAnalysisLibrary "CandleAnalysis" A collection of frequently used candle analysis functions in my scripts. isBullish(barsBack)   Checks if a specific bar is bullish.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar is bullish, otherwise returns false. isBearish(barsBack)   Checks if a specific bar is bearish.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar is bearish, otherwise returns false. isBE(barsBack)   Checks if a specific bar is break even.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar is break even, otherwise returns false. getBodySize(barsBack, inPriceChg)   Calculates a specific candle's body size.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).      inPriceChg (bool) : (bool) True to return the body size as a price change value. The default is false (in points).   Returns: The candle's body size in points. getTopWickSize(barsBack, inPriceChg)   Calculates a specific candle's top wick size.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).      inPriceChg (bool) : (bool) True to return the wick size as a price change value. The default is false (in points).   Returns: The candle's top wick size in points. getBottomWickSize(barsBack, inPriceChg)   Calculates a specific candle's bottom wick size.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).      inPriceChg (bool) : (bool) True to return the wick size as a price change value. The default is false (in points).   Returns: The candle's bottom wick size in points. getBodyPercent(barsBack)   Calculates a specific candle's body size as a percentage of its entire size including its wicks.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: The candle's body size percentage. isHammer(fib, bullish, barsBack)   Checks if a specific bar is a hammer candle based on a given fibonacci level.   Parameters:      fib (float) : (float) The fibonacci level to base candle's body on. The default is 0.382.      bullish (bool) : (bool) True if the candle must to be green. The default is false.      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar matches the requirements of a hammer candle, otherwise returns false. isShootingStar(fib, bearish, barsBack)   Checks if a specific bar is a shooting star candle based on a given fibonacci level.   Parameters:      fib (float) : (float) The fibonacci level to base candle's body on. The default is 0.382.      bearish (bool) : (bool) True if the candle must to be red. The default is false.      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar matches the requirements of a shooting star candle, otherwise returns false. isDoji(wickSize, bodySize, barsBack)   Checks if a specific bar is a doji candle based on a given wick and body size.   Parameters:      wickSize (float) : (float) The maximum top wick size compared to the bottom and vice versa. The default is 1.5.      bodySize (float) : (bool) The maximum body size as a percentage compared to the entire candle size. The default is 5.      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar matches the requirements of a doji candle. isBullishEC(gapTolerance, rejectionWickSize, engulfWick, barsBack)   Checks if a specific bar is a bullish engulfing candle.   Parameters:      gapTolerance (int)      rejectionWickSize (int) : (int) The maximum top wick size compared to the body as a percentage. The default is 10.      engulfWick (bool) : (bool) True if the engulfed candle's wick requires to be engulfed as well. The default is false.      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar matches the requirements of a bullish engulfing candle. isBearishEC(gapTolerance, rejectionWickSize, engulfWick, barsBack)   Checks if a specific bar is a bearish engulfing candle.   Parameters:      gapTolerance (int)      rejectionWickSize (int) : (int) The maximum bottom wick size compared to the body as a percentage. The default is 10.      engulfWick (bool) : (bool) True if the engulfed candle's wick requires to be engulfed as well. The default is false.      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar matches the requirements of a bearish engulfing candle.
Pine Script® ライブラリ
ActiveQuantsの投稿
MarcosLibraryLibrary "MarcosLibrary" A colection of frequently used functions in my scripts. bullFibRet(priceLow, priceHigh, fibLevel)   Calculates a bullish fibonacci retracement value.   Parameters:      priceLow (float) : (float) The lowest price point.      priceHigh (float) : (float) The highest price point.      fibLevel (float) : (float) The fibonacci level to calculate.   Returns: The fibonacci value of the given retracement level. bearFibRet(priceLow, priceHigh, fibLevel)   Calculates a bearish fibonacci retracement value.   Parameters:      priceLow (float) : (float) The lowest price point.      priceHigh (float) : (float) The highest price point.      fibLevel (float) : (float) The fibonacci level to calculate.   Returns: The fibonacci value of the given retracement level. bullFibExt(priceLow, priceHigh, thirdPivot, fibLevel)   Calculates a bullish fibonacci extension value.   Parameters:      priceLow (float) : (float) The lowest price point.      priceHigh (float) : (float) The highest price point.      thirdPivot (float) : (float) The third price point.      fibLevel (float) : (float) The fibonacci level to calculate.   Returns: The fibonacci value of the given extension level. bearFibExt(priceLow, priceHigh, thirdPivot, fibLevel)   Calculates a bearish fibonacci extension value.   Parameters:      priceLow (float) : (float) The lowest price point.      priceHigh (float) : (float) The highest price point.      thirdPivot (float) : (float) The third price point.      fibLevel (float) : (float) The fibonacci level to calculate.   Returns: The fibonacci value of the given extension level. isBullish(barsBack)   Checks if a specific bar is bullish.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar is bullish, otherwise returns false. isBearish(barsBack)   Checks if a specific bar is bearish.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar is bearish, otherwise returns false. isBE(barsBack)   Checks if a specific bar is break even.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar is break even, otherwise returns false. getBodySize(barsBack, inPriceChg)   Calculates a specific candle's body size.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).      inPriceChg (bool) : (bool) True to return the body size as a price change value. The default is false (in points).   Returns: The candle's body size in points. getTopWickSize(barsBack, inPriceChg)   Calculates a specific candle's top wick size.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).      inPriceChg (bool) : (bool) True to return the wick size as a price change value. The default is false (in points).   Returns: The candle's top wick size in points. getBottomWickSize(barsBack, inPriceChg)   Calculates a specific candle's bottom wick size.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).      inPriceChg (bool) : (bool) True to return the wick size as a price change value. The default is false (in points).   Returns: The candle's bottom wick size in points. getBodyPercent(barsBack)   Calculates a specific candle's body size as a percentage of its entire size including its wicks.   Parameters:      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: The candle's body size percentage. isHammer(fib, bullish, barsBack)   Checks if a specific bar is a hammer candle based on a given fibonacci level.   Parameters:      fib (float) : (float) The fibonacci level to base candle's body on. The default is 0.382.      bullish (bool) : (bool) True if the candle must to be green. The default is false.      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar matches the requirements of a hammer candle, otherwise returns false. isShootingStar(fib, bearish, barsBack)   Checks if a specific bar is a shooting star candle based on a given fibonacci level.   Parameters:      fib (float) : (float) The fibonacci level to base candle's body on. The default is 0.382.      bearish (bool) : (bool) True if the candle must to be red. The default is false.      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar matches the requirements of a shooting star candle, otherwise returns false. isDoji(wickSize, bodySize, barsBack)   Checks if a specific bar is a doji candle based on a given wick and body size.   Parameters:      wickSize (float) : (float) The maximum top wick size compared to the bottom and vice versa. The default is 1.5.      bodySize (float) : (bool) The maximum body size as a percentage compared to the entire candle size. The default is 5.      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar matches the requirements of a doji candle. isBullishEC(gapTolerance, rejectionWickSize, engulfWick, barsBack)   Checks if a specific bar is a bullish engulfing candle.   Parameters:      gapTolerance (int)      rejectionWickSize (int) : (int) The maximum top wick size compared to the body as a percentage. The default is 10.      engulfWick (bool) : (bool) True if the engulfed candle's wick requires to be engulfed as well. The default is false.      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar matches the requirements of a bullish engulfing candle. isBearishEC(gapTolerance, rejectionWickSize, engulfWick, barsBack)   Checks if a specific bar is a bearish engulfing candle.   Parameters:      gapTolerance (int)      rejectionWickSize (int) : (int) The maximum bottom wick size compared to the body as a percentage. The default is 10.      engulfWick (bool) : (bool) True if the engulfed candle's wick requires to be engulfed as well. The default is false.      barsBack (int) : (int) The number of bars to look back. The default is 0 (current bar).   Returns: True if the bar matches the requirements of a bearish engulfing candle.
Pine Script® ライブラリ
ActiveQuantsの投稿
TradingUtilsLibrary "TradingUtils" Utility library for common trading functions calcVariation(price, threshold)   Calculates variation of a price based on a threshold   Parameters:      price (float) : (float) The price to be varied      threshold (float) : (float) The threshold for the variation   Returns: (float) The varied price sendAlert(action, symbol, orderType, quantity, message)   Sends an alert message in JSON format   Parameters:      action (string) : (string) The action to be taken (e.g., "BUY", "SELL")      symbol (string) : (string) The trading symbol (e.g., "BTCUSDT")      orderType (string) : (string) The order type (e.g., "MARKET")      quantity (float) : (float) The quantity of the order      message (string) : (string) The message to be included in the alert updateLine(condition, index, price, lineColor)   Updates or creates a line on the chart   Parameters:      condition (bool) : (bool) Condition to check if the line should be updated or created      index (int) : (int) The current bar index      price (float) : (float) The price value for the line      lineColor (color) : (color) The color of the line   Returns: (line) The updated or newly created line
Pine Script® ライブラリ
kenneth7e7aの投稿
CandleInsightsLibrary "CandleInsights" CandleInsights provides a set of utility functions to facilitate identifying certain types of individual candles and candle patterns. isBullish()   Returns true if candle is bullish.   Returns: bool isBearish()   Returns true if candle is bearish.   Returns: bool isHammer()   Returns true if candle is a hammer. TODO: Allow params   Returns: bool isShootingStar()   Returns true if candle is a shooting star. TODO: Allow params   Returns: bool isBearishToppingTail()   Returns true if candle is bearish with a top wick over half the range of the candle. TODO: Allow params   Returns: bool isHanging()   Returns true if candle is considering a hanging candle (aka hanging man). TODO: Allow params   Returns: bool isLongBullish(pctChg)   Parameters:      pctChg (float) isBullishEngulfing()
Pine Script® ライブラリ
bluediniの投稿
CCOMET_Scanner_LibraryLibrary "CCOMET_Scanner_Library" - A Trader's Edge (ATE)_Library was created to assist in constructing CCOMET Scanners Loc_tIDs_Col(_string, _firstLocation)   TickerIDs: You must form this single tickerID input string exactly as described in the scripts info panel (little gray 'i' that is circled at the end of the settings in the settings/input panel that you can hover your cursor over this 'i' to read the details of that particular input). IF the string is formed correctly then it will break up this single string parameter into a total of 40 separate strings which will be all of the tickerIDs that the script is using in your CCOMET Scanner. Locations: This function is used when there's a desire to print an assets ALERT LABELS. A set Location on the scale is assigned to each asset. This is created so that if a lot of alerts are triggered, they will stay relatively visible and not overlap each other. If you set your '_firstLocation' parameter as 1, since there are a max of 40 assets that can be scanned, the 1st asset's location is assigned the value in the '_firstLocation' parameter, the 2nd asset's location is the (1st asset's location+1)...and so on.   Parameters:      _string (simple string) : (string) A maximum of 40 Tickers (ALL joined as 1 string for the input parameter) that is formulated EXACTLY as described within the tooltips of the TickerID inputs in my CCOMET Scanner scripts: assets = input.text_area(tIDset1, title="TickerID (MUST READ TOOLTIP)", tooltip="Accepts 40 TICKERID's for each copy of the script on the chart. TEXT FORMATTING RULES FOR TICKERID'S: (1) To exclude the EXCHANGE NAME in the Labels, de-select the next input option. (2) MUST have a space (' ') AFTER each TickerID. (3) Capitalization in the Labels will match cap of these TickerID's. (4) If your asset has a BaseCurrency & QuoteCurrency (ie. ADAUSDT ) BUT you ONLY want Labels to show BaseCurrency(ie.'ADA'), include a FORWARD SLASH ('/') between the Base & Quote (ie.'ADA/USDT')", display=display.none)      _firstLocation (simple int) : (simple int) Optional (starts at 1 if no parameter added). Location that you want the first asset to print its label if is triggered to do so. ie. loc2=loc1+1, loc3=loc2+1, etc.   Returns: Returns 40 output variables in the tuple (ie. between the ' ') with the TickerIDs, 40 variables for the locations for alert labels, and 40 Colors for labels/plots TickeridForLabelsAndSecurity(_ticker, _includeExchange)   This function accepts the TickerID Name as its parameter and produces a single string that will be used in all of your labels.   Parameters:      _ticker (simple string) : (string) For this parameter, input the varible named '_coin' from your 'f_main()' function for this parameter. It is the raw Ticker ID name that will be processed.      _includeExchange (simple bool) : (bool) Optional (if parameter not included in function it defaults to false ). Used to determine if the Exchange name will be included in all labels/triggers/alerts.   Returns: ( ) Returns 2 output variables: 1st ('_securityTickerid') is to be used in the 'request.security()' function as this string will contain everything TV needs to pull the correct assets data. 2nd ('lblTicker') is to be used in all of the labels in your CCOMET Scanner as it will only contain what you want your labels to show as determined by how the tickerID is formulated in the CCOMET Scanner's input. InvalID_LblSz(_barCnt, _close, _securityTickerid, _invalidArray, _tablePosition, _stackVertical, _lblSzRfrnce)   INVALID TICKERIDs: This is to add a table in the middle right of your chart that prints all the TickerID's that were either not formulated correctly in the '_source' input or that is not a valid symbol and should be changed. LABEL SIZES: This function sizes your Alert Trigger Labels according to the amount of Printed Bars the chart has printed within a set time period, while also keeping in mind the smallest relative reference size you input in the 'lblSzRfrnceInput' parameter of this function. A HIGHER % of Printed Bars(aka...more trades occurring for that asset on the exchange), the LARGER the Name Label will print, potentially showing you the better opportunities on the exchange to avoid exchange manipulation liquidations. *** SHOULD NOT be used as size of labels that are your asset Name Labels next to each asset's Line Plot... if your CCOMET Scanner includes these as you want these to be the same size for every asset so the larger ones dont cover the smaller ones if the plots are all close to each other ***   Parameters:      _barCnt (float) : (float) Get the 1st variable('barCnt') from the Security function's tuple and input it as this functions 1st input parameter which will directly affect the size of the 2nd output variable ('alertTrigLabel') that is also outputted by this function.      _close (float) : (float) Put your 'close' variable named '_close' from the security function here.      _securityTickerid (string) : (string) Throughout the entire charts updates, if a '_close' value is never registered then the logic counts the asset as INVALID. This will be the 1st TickerID variable (named _securityTickerid) outputted from the tuple of the TickeridForLabels() function above this one.      _invalidArray (array) : (array string) Input the array from the original script that houses all of the invalidArray strings.      _tablePosition (simple string) : (string) Optional (if parameter not included, it defaults to position.middle_right). Location on the chart you want the table printed. Possible strings include: position.top_center, position.top_left, position.top_right, position.middle_center, position.middle_left, position.middle_right, position.bottom_center, position.bottom_left, position.bottom_right.      _stackVertical (simple bool) : (bool) Optional (if parameter not included, it defaults to true). All of the assets that are counted as INVALID will be created in a list. If you want this list to be prited as a column then input 'true' here, otherwise they will all be in a row.      _lblSzRfrnce (string) : (string) Optional (if parameter not included, it defaults to size.small). This will be the size of the variable outputted by this function named 'assetNameLabel' BUT also affects the size of the output variable 'alertTrigLabel' as it uses this parameter's size as the smallest size for 'alertTrigLabel' then uses the '_barCnt' parameter to determine the next sizes up depending on the "_barCnt" value.   Returns: ( ) Returns 2 variables: 1st output variable ('AssetNameLabel') is assigned to the size of the 'lblSzRfrnceInput' parameter. 2nd output variable('alertTrigLabel') can be of variying sizes depending on the 'barCnt' parameter...BUT the smallest size possible for the 2nd output variable ('alertTrigLabel') will be the size set in the 'lblSzRfrnceInput' parameter. PrintedBarCount(_time, _barCntLength, _barCntPercentMin)   The Printed BarCount Filter looks back a User Defined amount of minutes and calculates the % of bars that have printed out of the TOTAL amount of bars that COULD HAVE been printed within the same amount of time.   Parameters:      _time (int) : (int) The time associated with the chart of the particular asset that is being screened at that point.      _barCntLength (int) : (int) The amount of time (IN MINUTES) that you want the logic to look back at to calculate the % of bars that have actually printed in the span of time you input into this parameter.      _barCntPercentMin (int) : (int) The minimum % of Printed Bars of the asset being screened has to be GREATER than the value set in this parameter for the output variable 'bc_gtg' to be true.   Returns: ( ) Returns 2 outputs: 1st is the % of Printed Bars that have printed within the within the span of time you input in the '_barCntLength' parameter. 2nd is true/false according to if the Printed BarCount % is above the threshold that you input into the '_barCntPercentMin' parameter.
Pine Script® ライブラリ
A_Traders_Edgeの投稿
AGbayLIBLibrary "AGbayLIB" Changes the timeframe period to the given period and returns the data matrix and sets the timeframe to the active time period getTimeFrameValues(active_period_, period_, max_bars_)   : add function description here   Parameters:      active_period_ (string) : Current time frame period to be set after getting period_ data      period_ (string) : Target time period for returning data      max_bars_ (int) : The historical bar count to be get   Returns: An array of data_row type with size of max_bars_ which includes rows of data: data_row   Fields:      year (series__integer)      month (series__integer)      day (series__integer)      hour (series__integer)      minute (series__integer)      second (series__integer)      fulltime (series__string)      open (series__float)      close (series__float)      high (series__float)      low (series__float)      volume (series__float)
Pine Script® ライブラリ
agbayの投稿
1
ta_mLibrary "ta_m" This library is a Pine Script™ programmer’s tool containing calcs for my oscillators and some helper functions. upDnIntrabarVolumesByPolarity()   Determines if the volume for an intrabar is up or down.   Returns: ( ) A tuple of two values, one of which contains the bar's volume. `upVol` is the positive volume of up bars. `dnVol` is the negative volume of down bars. Note that when this function is designed to be called with `request.security_lower_tf()`, which will return a tuple of "array" arrays containing up and dn volume for all the intrabars in a chart bar. upDnIntrabarVolumesByPrice()   Determines if the intrabar volume is up or down   Returns: ( ) A tuple of two values, one of which contains the bar's volume. `upVol` is the positive volume of up bars. `dnVol` is the negative volume of down bars. Note that when this function is designed to be called with `request.security_lower_tf()`, which will return a tuple of "array" arrays containing up and dn volume for all the intrabars in a chart bar.
Pine Script® ライブラリ
vikkuの投稿
CandlestickPatternsLibrary "CandlestickPatterns" This library provides a wide range of candlestick patterns, and available for user to call each pattern individually. It's a comprehensive and common tool designed for traders seeking to raise their technical analysis, and it may help users identify key turning of price action in financial instruments. Credit to public technical “*All Candlestick Patterns*” indicator. abandonedBaby(order, d1)   The "Abandoned Baby" candlestick pattern is a bullish/bearish pattern consists of three candles.   Parameters:      order (simple string) : (simple string) Pattern order type "bull" or "bear".      d1 (simple float) : (simple float) Previous candle's body percentage out of candle range. Optional argument, default is 5. darkCloudCover(c1, n)   The "Dark Cloud Cover" is a bearish pattern consists of two candles.   Parameters:      c1 (simple bool) : (simple bool) Previous candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. doji(d0)   The "Doji" is neither bullish or bearish consists of one candles.   Parameters:      d0 (simple float) : (simple float) Current candle's body percentage out of candle range. Optional argument, default is 5. dojiStar(order, c1, n, d0)   The "Doji Star" is a bullish/bearish pattern consists of two candles.   Parameters:      order (simple string) : (simple string) Pattern order type "bull" or "bear" .      c1 (simple bool) : (simple bool) Previous candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14.      d0 (simple float) : (simple float) Current candle's body percentage out of candle range. Optional argument, default is 5. downsideTasukiGap(c2, c1, n)   The "Downside Tasuki Gap" is a bearish pattern consists of three candles.   Parameters:      c2 (simple bool) : (simple bool) Before previous candle's body must be higher than average. Optional argument, default is true.      c1 (simple bool) : (simple bool) Previous candle's body must be lower than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. dragonflyDoji(d0)   The "Dragon Fly Doji" is a bullish pattern consists of one candle.   Parameters:      d0 (simple float) : (simple float) Current candle's body percentage out of candle range. Optional argument, default is 5. engulfing(order, c1, c0, n)   The "Engulfing" is a bullish/bearish pattern consists of two candles.   Parameters:      order (simple string) : (simple string) Pattern order type "bull" or "bear".      c1 (simple bool) : (simple bool) Previous candle's body must be lower than average. Optional argument, default is true.      c0 (simple bool) : (simple bool) Current candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. eveningDojiStar(c2, c0, d1, n)   The "Evening Doji Star" is a bearish pattern consists of three candles.   Parameters:      c2 (simple bool) : (simple bool) Before previous candle's body must be higher than average, default is true.      c0 (simple bool) : (simple bool) Current candle's body must be higher than average. Optional argument, default is true.      d1 (simple float) : (simple float) Previous candle's body percentage out of candle range. Optional argument, default is 5.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. eveningStar(c2, c1, c0, n)   The "Evening Star" is a bearish pattern consists of three candles.   Parameters:      c2 (simple bool) : (simple bool) Before previous candle's body must be higher than average. Optional argument, default is true.      c1 (simple bool) : (simple bool) Previous candle's body must be lower than average. Optional argument, default is true.      c0 (simple bool) : (simple bool) Current candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. fallingThreeMethods(c4, c3, c2, c1, c0, n)   The "Falling Three Methods" is a bearish pattern consists of five candles.   Parameters:      c4 (simple bool) : (simple bool) 5th candle ago body must be higher than average. Optional argument, default is true.      c3 (simple bool) : (simple bool) 4th candle ago body must be lower than average. Optional argument, default is true.      c2 (simple bool) : (simple bool) 3rd candle ago body must be lower than average. Optional argument, default is true.      c1 (simple bool) : (simple bool) 2nd candle ago body must be lower than average. Optional argument, default is true.      c0 (simple bool) : (simple bool) Current candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14.   Returns: (bool) fallingWindow()   The "Falling Window" is a bearish pattern consists of two candles. gravestoneDoji(d0)   The "Gravestone Doji" is a bearish pattern consists of one candle.   Parameters:      d0 (simple float) : (simple float) Current candle's body percentage out of candle range. Optional argument, default is 5. hammer(c0, n)   The "Hammer" is a bullish pattern consists of one candle.   Parameters:      c0 (simple bool) : (simple bool) Current candle's body must be lower than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. hangingMan(c0, n)   The "Hanging Man" is a bearish pattern consists of one candle.   Parameters:      c0 (simple bool) : (simple bool) Current candle's body must be lower than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. haramiCross(order, c1, n)   The "Harami Cross" candlestick pattern is a bullish/bearish pattern consists of two candles.   Parameters:      order (string) : (simple string) Pattern order type "bull" or "bear".      c1 (simple bool) : (simple bool) Previous candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. harami(order, c1, c0, n)   The "Harami" candlestick pattern is a bullish/bearish pattern consists of two candles.   Parameters:      order (string) : (simple string) Pattern order type "bull" or "bear"      c1 (simple bool) : (simple bool) Previous candle's body must be higher than average. Optional argument, default is true.      c0 (simple bool) : (simple bool) Current candle's body must be lower than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. invertedHammer(c0, n)   The "Inverted Hammer" is a bullish pattern consists of one candle.   Parameters:      c0 (simple bool) : (simple bool) Current candle's body must be lower than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. kicking(order, c1, c0, n)   The "Kicking" candlestick pattern is a bullish/bearish pattern consists of two candles.   Parameters:      order (string) : (simple string) Pattern order type "bull" or "bear"      c1 (simple bool) : (simple bool) Previous candle's body must be higher than average. Optional argument, default is true.      c0 (simple bool) : (simple bool) Current candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. longLowerShadow(l0)   The "Long Lower Shadow" candlestick pattern is a bullish pattern consists of one candles.   Parameters:      l0 (simple float) : (simple float) Current candle's lower wick min percentage out of candle range. Optional argument, default is 75. longUpperShadow(u0)   The "Long Upper Shadow" candlestick pattern is a bearish pattern consists of one candles.   Parameters:      u0 (simple float) : (simple float) Current candle's upper wick min percentage out of candle range. Optional argument, default is 75. marubozuBlack(c0, n)   The "Marubozu Black" candlestick pattern is a bearish pattern consists of one candles.   Parameters:      c0 (simple bool) : (simple bool) Current candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. marubozuWhite(c0, n)   The "Marubozu White" candlestick pattern is a bullish pattern consists of one candles.   Parameters:      c0 (simple bool) : (simple bool) Current candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. morningDojiStar(c2, d1, c0, n)   The "Morning Doji Star" candlestick pattern is a bullish pattern consists of three candles.   Parameters:      c2 (simple bool) : (simple bool) Before previous candle's body must be higher than average. Optional argument, default is true.      d1 (simple float) : (simple float) Previous candle's body percentage out of candle range. Optional argument, default is 5.      c0 (simple bool) : (simple bool) Current candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. morningStar(c2, c1, c0, n)   The "Morning Star" candlestick pattern is a bullish pattern consists of three candles.   Parameters:      c2 (simple bool) : (simple bool) Before previous candle's body must be higher than average. Optional argument, default is true.      c1 (simple bool) : (simple bool) Previous candle's body must be lower than average. Optional argument, default is true.      c0 (simple bool) : (simple bool) Cuurent candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. onNeck(c1, c0, n)   The "On Neck" candlestick pattern is a bearish pattern consists of two candles.   Parameters:      c1 (simple bool) : (simple bool) Previous candle's body must be higher than average. Optional argument, default is true.      c0 (simple bool) : (simple bool) Cuurent candle's body must be lower than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. piercing(c1, n)   The "Piercing" candlestick pattern is a bullish pattern consists of two candles.   Parameters:      c1 (simple bool) : (simple bool) Previous candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. risingThreeMethods(c4, c3, c2, c1, c0, n)   The "Rising Three Methods" candlestick pattern is a bullish pattern consists of five candles.   Parameters:      c4 (simple bool) : (simple bool) 5th candle ago body must be higher than average. Optional argument, default is true.      c3 (simple bool) : (simple bool) 4th candle ago body must be Lower than average. Optional argument, default is true.      c2 (simple bool) : (simple bool) 3rd candle ago body must be Lower than average. Optional argument, default is true.      c1 (simple bool) : (simple bool) 2nd candle ago body must be Lower than average. Optional argument, default is true.      c0 (simple bool) : (simple bool) Current candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. risingWindow()   The "Rising Window" candlestick pattern is a bullish pattern consists of two candle. shootingStar(c0, n)   The "Shooting Star" candlestick pattern is a bearish pattern consists of one candle.   Parameters:      c0 (simple bool) : (simple bool) Current candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. spinningTopBlack(l0, u0)   The "Spinning Top Black" is neither bullish or bearish.   Parameters:      l0 (simple float) : (simple float) Current candle's lower wick min percentage out of candle range. Optional argument, default is 34.      u0 (simple float) : (simple float) Current candle's upper wick min percentage out of candle range. Optional argument, default is 34. spinningTopWhite(l0, u0)   The "Spinning Top White" is neither bullish or bearish.   Parameters:      l0 (simple float) : (simple float) Current candle's lower wick min percentage out of candle range. Optional argument, default is 34.      u0 (simple float) : (simple float) Current candle's upper wick min percentage out of candle range. Optional argument, default is 34. threeBlackCrows(c2, c1, c0, n)   The "Three Black Crows" candlestick pattern is a bearish pattern consists of three candles.   Parameters:      c2 (simple bool) : (simple bool) Before previous candle's body must be higher than average. Optional argument, default is true.      c1 (simple bool) : (simple bool) Previous candle's body must be higher than average. Optional argument, default is true.      c0 (simple bool) : (simple bool) Cuurent candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. threeWhiteSoldiers(c2, c1, c0, n)   The "Three White Soldiers" candlestick pattern is a bullish pattern consists of three candles.   Parameters:      c2 (simple bool) : (simple bool) Before previous candle's body must be higher than average. Optional argument, default is true.      c1 (simple bool) : (simple bool) Previous candle's body must be higher than average. Optional argument, default is true.      c0 (simple bool) : (simple bool) Cuurent candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. triStar(order, d2, d1, d0)   The "Tri Star" candlestick pattern is a bullish/bearish pattern consists of three candles.   Parameters:      order (simple string) : (simple string) Pattern order type "bull" or "bear".      d2 (simple float) : (simple float) Before previous candle's body percentage out of candle range. Optional argument, default is 5.      d1 (simple float) : (simple float) Previous candle's body percentage out of candle range. Optional argument, default is 5.      d0 (simple float) : (simple float) Current candle's body percentage out of candle range. Optional argument, default is 5. tweezerBottom(c1, n)   The "Tweezer Bottom" candlestick pattern is a bullish pattern consists of two candles.   Parameters:      c1 (simple bool) : (simple bool) Previous candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. tweezerTop(c1, n)   The "Tweezer Top" candlestick pattern is a bearish pattern consists of two candles.   Parameters:      c1 (simple bool) : (simple bool) Previous candle's body must be higher than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14. upsideTasukiGap(c2, c1, n)   The "Tri Star" candlestick pattern is a bullish pattern consists of three candles.   Parameters:      c2 (simple bool) : (simple bool) Before Previous candle's body must be higher than average. Optional argument, default is true.      c1 (simple bool) : (simple bool) Previous candle's body must be lower than average. Optional argument, default is true.      n (simple int) : (simple int) Length of average candle's body. Optional argument, default is 14.
Pine Script® ライブラリ
MUQWISHIの投稿
3
JapaneseCandlestickPatternsLibrary "JapaneseCandlestickPatterns" Japanese Candlestick Patterns is a library of functions that enables the detection of popular Japanese candlestick patterns such as Doji, Hammer, and Engulfing, among others. The library provides a simple yet powerful way to analyze financial markets and make informed trading decisions. Japanese Candlestick Patterns library can help you identify potential trading opportunities. isDojiCandle() isGravestoneDojiCandle() isDragonflyDojiCandle() isEveningDojiStarCandle(isUpTrend)   Parameters:      isUpTrend (bool) isLongLeggedDojiCandle() isMorningDojiStarCandle(isDownTrend)   Parameters:      isDownTrend (bool) isBullishCounterattackLinesCandle(isDownTrend)   Parameters:      isDownTrend (bool) isBearishCounterattackLinesCandle(isUpTrend)   Parameters:      isUpTrend (bool) isDarkCloudCoverCandle(isUpTrend)   Parameters:      isUpTrend (bool) isBullishEngulfingCandle() isBearishEngulfingCandle() isHammerCandle(isDownTrend)   Parameters:      isDownTrend (bool) isHangingManCandle(isUpTrend)   Parameters:      isUpTrend (bool) isHaramiBearishCandle(isUpTrend)   Parameters:      isUpTrend (bool) isHaramiBullishCandle(isDownTrend)   Parameters:      isDownTrend (bool) isInNeckCandle(isDownTrend)   Parameters:      isDownTrend (bool) isOnNeckCandle(isDownTrend)   Parameters:      isDownTrend (bool) isPiercingCandle(isDownTrend)   Parameters:      isDownTrend (bool) threeBlackCrowsCandle(isUpTrend)   Parameters:      isUpTrend (bool) isThrustingNeckCandle(isDownTrend)   Parameters:      isDownTrend (bool) isUpsideGapTwoCrowsCandle(isUpTrend)   Parameters:      isUpTrend (bool) isAbandonedBabyTopCandle(isUpTrend)   Parameters:      isUpTrend (bool) isAbandonedBabyBottomCandle(isDownTrend)   Parameters:      isDownTrend (bool) isEveningStarCandle(isUpTrend)   Parameters:      isUpTrend (bool) isInvertedHammerCandle(isDownTrend)   Parameters:      isDownTrend (bool) isMorningStarCandle(isDownTrend)   Parameters:      isDownTrend (bool) isShootingStarCandle(isUpTrend)   Parameters:      isUpTrend (bool) isRisingThreeMethodsCandle(isUpTrend)   Parameters:      isUpTrend (bool) isFallingThreeMethodsCandle(isDownTrend)   Parameters:      isDownTrend (bool) isUpsideTasukiGapCandle(isUpTrend)   Parameters:      isUpTrend (bool) isDownsideGapTasukiCandle(isDownTrend)   Parameters:      isDownTrend (bool) isLongLowerShadowCandle() isLongUpperShadowCandle()
Pine Script® ライブラリ
Marceeelllの投稿
CandlesGroup_TypesLibrary "CandlesGroup_Types" CandlesGroup Type allows you to efficiently store and access properties of all the candles in your chart. You can easily manipulate large datasets, work with multiple timeframes, or analyze multiple symbols simultaneously. By encapsulating the properties of each candle within a CandlesGroup object, you gain a convenient and organized way to handle complex candlestick patterns and data. For usage instructions and detailed examples, please refer to the comments and examples provided in the source code. method init(_self)   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) method init(_self, propertyNames)   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup)      propertyNames (string ) method get(_self, key)   get values array from a given property name   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      key (string) : : key name of selected property. Default is "index"   Returns: values array method size(_self)   get size of values array. By default it equals to current bar_index   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object   Returns: size of values array method push(_self, key, value)   push single value to specific property   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      key (string) : : key name of selected property      value (float) : : property value   Returns: CandlesGroup object method push(_self, arr)   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup)      arr (float ) method populate(_self, ohlc)   populate ohlc to CandlesGroup   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      ohlc (float ) : : array of ohlc   Returns: CandlesGroup object method populate(_self, values, propertiesNames)   populate values base on given properties Names   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      values (float ) : : array of property values      propertiesNames (string ) : : an array stores property names. Use as keys to get values   Returns: CandlesGroup object method populate(_self)   populate values (default setup)   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object   Returns: CandlesGroup object method lookback(arr, bars_lookback)   get property value on previous candles. For current candle, use *.lookback()   Namespace types: float   Parameters:      arr (float ) : : array of selected property values      bars_lookback (int) : : number of candles lookback. 0 = current candle. Default is 0   Returns: single property value method highest_within_bars(_self, hiSource, start, end, useIndex)   get the highest property value between specific candles   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      hiSource (string) : : key name of selected property      start (int) : : start bar for calculation. Default is candles lookback value from current candle. 'index' value is used if 'useIndex' = true      end (int) : : end bar for calculation. Default is candles lookback value from current candle. 'index' value is used if 'useIndex' = true. Default is 0      useIndex (bool) : : use index instead of lookback value. Default = false   Returns: the highest value within candles method highest_within_bars(_self, returnWithIndex, hiSource, start, end, useIndex)   get the highest property value and bar index between specific candles   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      returnWithIndex (bool) : : the function only applicable when it is true      hiSource (string) : : key name of selected property      start (int) : : start bar for calculation. Default is candles lookback value from current candle. 'index' value is used if 'useIndex' = true      end (int) : : end bar for calculation. Default is candles lookback value from current candle. 'index' value is used if 'useIndex' = true. Default is 0      useIndex (bool) : : use index instead of lookback value. Default = false   Returns: method highest_point_within_bars(_self, hiSource, start, end, useIndex)   get a Point object which contains highest property value between specific candles   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      hiSource (string) : : key name of selected property      start (int) : : start bar for calculation. Default is candles lookback value from current candle. 'index' value is used if 'useIndex' = true      end (int) : : end bar for calculation. Default is candles lookback value from current candle. 'index' value is used if 'useIndex' = true. Default is 0      useIndex (bool) : : use index instead of lookback value. Default = false   Returns: Point object contains highest property value method lowest_within_bars(_self, loSource, start, end, useIndex)   get the lowest property value between specific candles   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      loSource (string) : : key name of selected property      start (int) : : start bar for calculation. Default is candles lookback value from current candle. 'index' value is used if 'useIndex' = true      end (int) : : end bar for calculation. Default is candles lookback value from current candle. 'index' value is used if 'useIndex' = true. Default is 0      useIndex (bool) : : use index instead of lookback value. Default = false   Returns: the lowest value within candles method lowest_within_bars(_self, returnWithIndex, loSource, start, end, useIndex)   get the lowest property value and bar index between specific candles   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      returnWithIndex (bool) : : the function only applicable when it is true      loSource (string) : : key name of selected property      start (int) : : start bar for calculation. Default is candles lookback value from current candle. 'index' value is used if 'useIndex' = true      end (int) : : end bar for calculation. Default is candles lookback value from current candle. 'index' value is used if 'useIndex' = true. Default is 0      useIndex (bool) : : use index instead of lookback value. Default = false   Returns: method lowest_point_within_bars(_self, loSource, start, end, useIndex)   get a Point object which contains lowest property value between specific candles   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      loSource (string) : : key name of selected property      start (int) : : start bar for calculation. Default is candles lookback value from current candle. 'index' value is used if 'useIndex' = true      end (int) : : end bar for calculation. Default is candles lookback value from current candle. 'index' value is used if 'useIndex' = true. Default is 0      useIndex (bool) : : use index instead of lookback value. Default = false   Returns: Point object contains lowest property value method time2bar(_self, t)   Convert UNIX time to bar index of active chart   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      t (int) : : UNIX time   Returns: bar index method time2bar(_self, timezone, YYYY, MMM, DD, hh, mm, ss)   Convert timestamp to bar index of active chart. User defined timezone required   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      timezone (string) : : User defined timezone      YYYY (int) : : Year      MMM (int) : : Month      DD (int) : : Day      hh (int) : : Hour. Default is 0      mm (int) : : Minute. Default is 0      ss (int) : : Second. Default is 0   Returns: bar index method time2bar(_self, YYYY, MMM, DD, hh, mm, ss)   Convert timestamp to bar index of active chart   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      YYYY (int) : : Year      MMM (int) : : Month      DD (int) : : Day      hh (int) : : Hour. Default is 0      mm (int) : : Minute. Default is 0      ss (int) : : Second. Default is 0   Returns: bar index method get_prop_from_time(_self, key, t)   get single property value from UNIX time   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      key (string) : : key name of selected property      t (int) : : UNIX time   Returns: single property value method get_prop_from_time(_self, key, timezone, YYYY, MMM, DD, hh, mm, ss)   get single property value from timestamp. User defined timezone required   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      key (string) : : key name of selected property      timezone (string) : : User defined timezone      YYYY (int) : : Year      MMM (int) : : Month      DD (int) : : Day      hh (int) : : Hour. Default is 0      mm (int) : : Minute. Default is 0      ss (int) : : Second. Default is 0   Returns: single property value method get_prop_from_time(_self, key, YYYY, MMM, DD, hh, mm, ss)   get single property value from timestamp   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      key (string) : : key name of selected property      YYYY (int) : : Year      MMM (int) : : Month      DD (int) : : Day      hh (int) : : Hour. Default is 0      mm (int) : : Minute. Default is 0      ss (int) : : Second. Default is 0   Returns: single property value method bar2time(_self, index)   Convert bar index of active chart to UNIX time   Namespace types: CandlesGroup   Parameters:      _self (CandlesGroup) : : CandlesGroup object      index (int) : : bar index   Returns: UNIX time Point   A point on chart   Fields:      price (series float) : : price value      bar (series int) : : bar index      bartime (series int) : : time in UNIX format of bar Property   Property object which contains values of all candles   Fields:      name (series string) : : name of property      values (float ) : : an array stores values of all candles. Size of array = bar_index CandlesGroup   Candles Group object which contains properties of all candles   Fields:      propertyNames (string ) : : an array stores property names. Use as keys to get values      properties (Property ) : : array of Property objects
Pine Script® ライブラリ
SteinGの投稿
Spider_PlotIntroduction: Spider charts, also known as radar charts or web charts, are a powerful data visualization tool that can display multiple variables in a circular format. They are particularly useful when you want to compare different data sets or evaluate the performance of a single data set across multiple dimensions. In this blog post, we will dive into the world of spider charts, explore their benefits, and demonstrate how you can create your own spider chart using the Spider_Plot library. Why Spider Charts are Cool: Spider charts have a unique visual appeal that sets them apart from other chart types. They allow you to display complex data in a compact, easy-to-understand format, making them perfect for situations where you need to convey a lot of information in a limited space. Some of the key benefits of spider charts include: Multi-dimensional analysis: Spider charts can display multiple variables at once, making them ideal for analyzing relationships between different data sets or examining a single data set across multiple dimensions. Easy comparison: By displaying data in a circular format, spider charts make it simple to compare different data points, identify trends, and spot potential issues. Versatility: Spider charts can be used for a wide range of applications, from business and finance to sports and health. They are particularly useful for situations where you need to analyze performance or make comparisons between different entities. Creating Your Own Spider Chart with the Spider_Plot Library: The Spider_Plot library is a user-friendly, easy-to-use tool that allows you to create stunning spider charts with minimal effort. To get started, you'll need to import the Spider_Plot library: import peacefulLizard50262/Spider_Plot/1 With the library imported, you can now create your own spider chart. The first step is to normalize your data. Normalizing ensures that all data points fall within the 0 to 1 range, which is important for creating a visually balanced spider chart. The Spider_Plot library provides the data_normalize function to help you normalize your data. This function accepts several parameters, including the normalization style ("All Time", "Range", or "Custom"), length of the range, outlier level, lookback period for standard deviation, and minimum and maximum values for the "Custom" normalization style. Once you have normalized your data, you can create an array of your data points using the array.from function. This array will be used as input for the draw_spider_plot function, which is responsible for drawing the spider plot on your chart. The draw_spider_plot function accepts an array of float values (the normalized data points), an array of background colors for each sector, a color for the axes, and a scaling factor. Example Usage: Here's an example script that demonstrates how to create a spider chart using the Spider_Plot library: oc = data_normalize(ta.ema(math.abs(open - close), 20), "Range", 20) // Create an array of your data points data = array.from(tr, rsi, stoch, dev, tr, oc, tr) // Define colors for each sector colors = array.from(color.new(color.red, 90), color.new(color.blue, 90), color.new(color.green, 90), color.new(color.orange, 90), color.new(color.purple, 90), color.new(color.purple, 90), color.new(color.purple, 90)) // Draw the spider plot on your chart draw_spider_plot(data, colors, color.gray, 100) In this example, we have first normalized six different data points (rsi, source, stoch, dev, tr, and oc) using the data_normalize function. Next, we create an array of these normalized data points and define an array of colors for each sector of the spider chart. Finally, we call the draw_spider_plot function to draw the spider chart on our chart. Conclusion: Spider charts are a versatile and visually appealing tool for analyzing and comparing multi-dimensional data. With the Spider_Plot library, you can easily create your own spider charts and unlock valuable insights from your data. Just remember to normalize your data and create an array of data points before calling the draw_spider_plot function. Happy charting! Library "Spider_Plot" data_normalize(data, style, length, outlier_level, dev_lookback, min, max)   data_normalize(data, string style, int length, float outlier_level, simple int dev_lookback, float min, float max)   Parameters:      data (float) : float , A float value to normalize.      style (string) : string , The normalization style: "All Time", "Range", or "Custom".      length (int) : int , The length of the range for "Range" normalization style.      outlier_level (float) : float , The outlier level to exclude from calculations.      dev_lookback (simple int) : int , The lookback period for calculating the standard deviation.      min (float) : float , The minimum value for the "Custom" normalization style.      max (float) : float , The maximum value for the "Custom" normalization style.   Returns: array , The normalized float value. draw_spider_plot(values, bg_colors, axes_color, scale)   draw_spider_plot(array values, array bg_colors, color axes_color, float scale)   Parameters:      values (float ) : array , An array of float values to plot in the spider plot.      bg_colors (color ) : array , An array of background colors for each sector in the spider plot.      axes_color (color) : color , The color of the axes in the spider plot. Default: color.gray      scale (float) : float , A scaling factor for the spider plot. Default: 10   Returns: void , Draws the spider plot on the chart.
Pine Script® ライブラリ
The_Peaceful_Lizardの投稿
2
time_filtersLibrary "time_filters" Collection of filters that related with time like sessions and datetime ranges. All existing session functions I found in the documentation e.g. not na(time(timeframe.period, sessionTimes)) are not suitable for strategies, since the execution of the entries and the exits are delayed by one bar. Thus I created this library to overcome this small but very important limitation. is_in_date_range(fromDate, toDate, srcTimezone, dstTimezone, t)   is_in_date_range - Check if the given time is between the start and end dates   Parameters:      fromDate : - The start date in UNIX time of the valid range      toDate : - The end date in UNIX time of the valid range      srcTimezone : - The timezone of reference for the 'from' and 'to' dates      dstTimezone : - The target timezone to convert the 'from' and 'to' dates      t : - The time to compare in UNIX format   Returns: series of bool whether or not the time is inside the valid range is_in_session(startTime, endTime, days, srcTimezone, dstTimezone, t)   is_in_session - Check if the given time is inside the session as defined by the input params   Parameters:      startTime : - The sessionTime object with the use flag and the start time      endTime : - The sessionTime object with the use flag and the end time      days : - The sessionDays object with the use flag and marks for each day of the session      srcTimezone : - The timezone of reference for the time ranges      dstTimezone : - The target timezone to convert the time ranges      t : - The current time to compare in UNIX format.   Returns: series of bool whether or not the time is inside the session sessionTime   Fields:      hourInDay      minuteInHour sessionDays   Fields:      mon      tue      wed      thu      fri      sat      sun
Pine Script® ライブラリ
cyberriderの投稿