High Volume Candles - RVolInspired by Key bars from Option Stalker Pro.
This one is meant to be used on charts where the interval is >=1D.
Highlights candles where RVol is > 1.2.
Helps to not accidentally miss that a candle move happened on high volume (or that it did not happen on high volume...), like potential reversals or resistance/support breaks.
Make sure to move this indicator above the ticker in the Object Tree, so that it is drawn on top of the ticker's candles.
More infos: www.reddit.com
Candlestick analysis
EMA20 Entry with Lei Teacher Strategy_Trend_Follow_RuleEMA20 Entry with Lei Teacher Strategy Trend Follow Entry Alert
Momentum Fusion Pro X Elite1️⃣ Impulse Detection
Purpose: Identify fast, significant price movements that could provide entry opportunities.
upImpulse: Triggered when the current candle breaks above the high from 2 candles ago and closes above that level.
downImpulse: Triggered when the current candle breaks below the low from 2 candles ago and closes below that level.
confirmLong / confirmShort: Only consider candles that close above/below the impulse level to reduce false signals.
Visualization: Boxes and lines mark the impulse zones on the chart.
Explanation: “We mark zones where the price shows clear momentum, helping spot potential entry points.”
2️⃣ Trend Filters
Purpose: Trade in the direction of the main trend.
EMA Fast & Slow: Determine the current timeframe trend.
EMA Multi-Timeframe (HTF): Confirms the trend on a higher timeframe.
trendHTF: Combines EMA, RSI, and CCI from the higher timeframe for stronger trend confirmation.
Explanation: “We only take trades aligned with the current trend and the higher timeframe trend.”
3️⃣ Momentum & Volatility Filters
Purpose: Ensure the move has strength before entering.
RSI & CCI: Confirm momentum and avoid overbought/oversold extremes.
Volume: Only consider candles with above-average volume.
VWAP: Confirms price is above/below VWAP for bullish/bearish validation.
ATR / Volatility: Only enter trades if candle size exceeds a multiple of ATR to filter weak moves.
Explanation: “This ensures entries occur during strong and validated moves, not weak or fake breakouts.”
4️⃣ Signal Scoring System
Purpose: Increase signal reliability by combining multiple filters.
Each filter contributes 1 point: impulse confirmation, EMA trend, HTF trend, RSI, CCI, volume, VWAP, and volatility.
minScore: Minimum number of filters required for a signal (default 6 out of 8).
finalLong / finalShort: Signals only appear if they meet or exceed the minimum score.
Explanation: “Signals are shown only when most indicators agree, reducing false positives.”
5️⃣ Chart Visualization
Green / Red triangles: Strong long or short signals.
Boxes and lines: Show impulse zones for support/resistance levels.
Explanation: “Arrows indicate high-probability trades, while zones help identify key price levels.”
6️⃣ Dashboard
Configurable position: Top Right, Bottom Right, Bottom Left.
Shows:
Number of detected impulse signals
Signal strength (longScore / shortScore)
Trend direction of higher timeframe
Explanation: “Quickly assess signal strength and trend without analyzing each indicator individually.”
7️⃣ Adjustable Parameters
EMA lengths and Trend Window
RSI / CCI periods and overbought/oversold levels
Volume average and ATR multiplier for volatility
Higher timeframe trend confirmation
Minimum active filters for signal validity
Explanation: “You can customize the indicator for conservative or aggressive trading styles.”
⚠️ Disclaimer
This indicator is for educational purposes only and does not guarantee profits. Trading involves risk, and users should trade responsibly and at their own risk.
High Minus LowThis indicator is a simple yet powerful tool for technical analysis. It measures the range of each candlestick by calculating the difference between its high and low, providing a direct visualization of market volatility.
Key Features:
Volatility at a Glance: The plot's height in the separate panel directly corresponds to the candle's trading range, allowing you to easily spot periods of high or low volatility.
Customizable Color: Easily change the line color to match your chart's theme and personal preferences.
Actionable Insights: Use this indicator to confirm periods of market consolidation before a breakout or to gauge the strength of a trend based on the expansion of candle ranges.
Swing Highs/Lows & Candle Patterns[LuxAlgo] [Filtered]Swing Highs/Lows & Candle Patterns - Tweaked Version
This indicator is a customized and enhanced version of LuxAlgo’s original Swing Highs/Lows & Candle Patterns indicator. It identifies and labels critical swing high and swing low points to help visualize market structure, alongside detecting key reversal candlestick patterns such as Hammer, Inverted Hammer, Bullish Engulfing, Hanging Man, Shooting Star, and Bearish Engulfing.
With added options to selectively display only Lower Highs (LH) and Higher Lows (HL), this tweaked version offers greater flexibility for traders focusing on specific market dynamics. Users can also customize the lookback length and label styling to fit their preferences.
Credit to LuxAlgo for the original concept and foundation of this powerful tool, which this script builds upon to support more tailored technical analysis. Ideal for swing traders and technical analysts seeking improved entry and exit signals through a combination of price swings and candlestick pattern recognition.
KPL with ATRThis is not my own formula. Just published in Team viewer. its the combination KPL and ATR
Volume & RVOL TableVolume & RVOL Dynamic Table
Clean table displaying current volume, current RVOL%, and last RVOL% with dynamic color coding based on customizable percentage thresholds.
Features:
Color-coded RVOL cells change automatically based on volume activity levels
Vertical or horizontal layout options
Fully customizable colors, position, and text sizing
Adjustable RVOL period (default: 50 candles)
Perfect for quick volume analysis without chart clutter. Works on all timeframes.
Multi Timeframe EMA14 (CHANUT)เป็นการใช้ อินดิเคเตอร์ ในการดู แนวโน้มตลาดเช่น ทองคำ
It is the use of indicators to look at market trends such as gold.
ICT ob by AyushThis indicator marks **order blocks** by detecting the first opposite candle of any pullback run and drawing a line from its **open** to the confirming candle’s close.
It works on **any timeframe (or HTF projection)**, stays clean, and only shows **solid, body-confirmed OBs**.
Balanced Big Wicks (50/50) HighlighterThis open-source indicator highlights candles with balanced long wicks (50/50 style)—that is, candles where both upper and lower shadows are each at least 30–60% of the full range and within ~8% of each other, while retaining a substantial body. This specific structure often reflects indecision or liquidity sweeps and can precede strong breakout moves.
How It Works (Inputs and Logic)
Min wick % (each side): 30–60% of candle range
Max body %: up to 60% of range (preserves strong body presence)
Equality tolerance: wicks within 8% of each other
ATR filter (multiples of ATR14): ensures only significant-range candles are flagged
When a “50/50” candle forms, it’s visually colored and labeled; audibly alertable.
How to Use It
Long setup: price closes above the wick-high → potential long entry (SL below wick-low, TP = 1:1).
Short setup: price closes below wick-low → potential short entry (SL above wick-high, TP = 1:1).
Especially effective on 5–15 minute scalping charts when aligned with high-volume sessions or HTF trend context.
Why This Indicator Is Unique
Unlike standard wick or doji voters, this script specifically filters for candles with a strong body and symmetrical wicks, paired with a range filter, reducing noise significantly.
Important Notes
No unrealistic claims: backtested setups indicate high occurrence of clean breakouts, though performance depends on market structure.
Script built responsibly: uses real-time calculations only, no future-data lookahead.
Visuals on the published chart reflect default input values exactly.
Premarket Breakout Painter (08:00-09:29 ET) — First Break Only**Pre-Market Breakout Indicator**
This indicator is designed to help traders identify and trade **pre-market breakout levels**. It automatically marks the pre-market high and low range, then extends those levels into the regular session so you can see when price breaks above or below them.
---
## 🔑 **How It Works**
1. **Pre-Market Range**
* During extended hours (before the 09:30 ET open), the indicator tracks the **highest high** and **lowest low**.
* These levels form the **pre-market range**.
2. **Breakout Levels**
* At the market open, the pre-market high and low are plotted as horizontal lines.
* When price breaks above the pre-market high → potential **bullish breakout**.
* When price breaks below the pre-market low → potential **bearish breakout**.
3. **Optional Midline / VWAP**
---
🎨 **Visuals**
* **Horizontal lines** marking pre-market high and low.
* Lines extend into the regular session for easy tracking.
* Colors can be customized for bullish/bearish clarity.
---
⚙️ **Inputs**
* **Session Times** (default: 04:00–09:30 ET for U.S. equities).
* **Show/Hide Midline** (optional).
* **Line Styles & Colors**.
* **Alerts** (optional, e.g., alert when price crosses pre-market high or low).
---
🚨 **Practical Use**
* Look for **high volume breakouts** through pre-market high/low after the bell.
* Use levels as **support/resistance** for pullback entries.
* Combine with EMA trend filters, VWAP, or market internals for confirmation.
---
✅ This indicator doesn’t give buy/sell signals on its own — it’s a **visual framework** to highlight where the market may make its first decisive move of the day.
Auto S/R 1H - Stable Simplethat is a script to find out the support and resistance as trendlines for stocks in one hour timeframe for swing trading.
Arena TP Manager//@version=5
indicator("Arena TP Manager", overlay=true, max_labels_count=500)
// === INPUTS ===
entryPrice = input.float(0.0, "Entry Price", step=0.1)
stopLossPerc = input.float(5.0, "Stop Loss %", step=0.1)
tp1Perc = input.float(10.0, "TP1 %", step=0.1)
tp2Perc = input.float(20.0, "TP2 %", step=0.1)
tp3Perc = input.float(30.0, "TP3 %", step=0.1)
// === CALCULATIONS ===
stopLoss = entryPrice * (1 - stopLossPerc/100)
tp1 = entryPrice * (1 + tp1Perc/100)
tp2 = entryPrice * (1 + tp2Perc/100)
tp3 = entryPrice * (1 + tp3Perc/100)
// === PLOTTING ===
plot(entryPrice > 0 ? entryPrice : na, title="Entry", color=color.yellow, linewidth=2, style=plot.style_linebr)
plot(entryPrice > 0 ? stopLoss : na, title="Stop Loss", color=color.red, linewidth=2, style=plot.style_linebr)
plot(entryPrice > 0 ? tp1 : na, title="TP1", color=color.green, linewidth=2, style=plot.style_linebr)
plot(entryPrice > 0 ? tp2 : na, title="TP2", color=color.green, linewidth=2, style=plot.style_linebr)
plot(entryPrice > 0 ? tp3 : na, title="TP3", color=color.green, linewidth=2, style=plot.style_linebr)
// === LABELS ===
if (entryPrice > 0)
label.new(bar_index, entryPrice, "ENTRY: " + str.tostring(entryPrice), style=label.style_label_up, color=color.yellow, textcolor=color.black)
label.new(bar_index, stopLoss, "SL: " + str.tostring(stopLoss), style=label.style_label_down, color=color.red, textcolor=color.white)
label.new(bar_index, tp1, "TP1: " + str.tostring(tp1), style=label.style_label_up, color=color.green, textcolor=color.white)
label.new(bar_index, tp2, "TP2: " + str.tostring(tp2), style=label.style_label_up, color=color.green, textcolor=color.white)
label.new(bar_index, tp3, "TP3: " + str.tostring(tp3), style=label.style_label_up, color=color.green, textcolor=color.white)
Advanced Candlestick Patterns [MAB]🔎 Overview
Advanced Candlestick Patterns is a framework that detects well-defined candlestick patterns with a consistent Validation / Devalidation process, optional swing-context filters , and a hidden-candle reconstruction mode for stricter pattern anatomy.
The goal is clarity and discipline: signals are described, thresholds are visible, and risk parameters are explicit.
⚙️ Key Features
📊 Pattern Engine (Extensible) — Modular detection methods so new patterns can be added without changing workflow.
✅ Validation / Devalidation — Clear rules for confirmation and invalidation; plotted with distinct lines for transparency.
📈 Swing Filter (Optional) — Require setups to align with local swing highs/lows via selectable lookbacks.
🧩 Hidden-Candle Mode — Reconstructs OHLC (prev close + current extremes) to reveal intra-bar structure; visuals may differ from native bars.
🎯Target Systems — Choose Points, Percentage, or Risk:Reward; info label shows EP/SL/TP-1.
Performance-Safe Controls — Label size, info toggle, and non-editable internal lines.
📈 How to Use
Add the script to your chart (after access is granted).
Choose pattern types for Bullish and Bearish detection from the inputs.
⁃ Enable Hidden Candles if you want stricter intra-bar anatomy.
⁃ Enable Detect near Swings and pick a swing length (Smaller/Medium/Bigger).
💬Decide whether to show Trade Info Labels (Entry, SL, Target 1).
🎯Set your Target Mode (Points / Percentage / Risk:Reward) and parameter.
✅ Use the plotted Validation (confirmation) and Devalidation (invalidation) levels to plan.
Tip: With Detect near Swings ON, a setup counts only if the prior bar’s high/low equals the rolling extreme. If too strict, adjust the lookback or disable.
💡Recommended charting
• Intraday structure: 5m–15m–30m
• Swing confirmation: 2h-4h–1D
• Test across multiple symbols; avoid cherry-picking.
🛡 Risk Management System
This tool displays mechanics— you control the risk. A common template:
Entry : Entry is typically considered only after validation.
Stop-Loss : Initial SL at the structure-defined level (displayed).
Target 1 : Choose Points / % / Risk:Reward (e.g., 1R).
After TP-1 : Consider partial profits and trail the remainder via ATR / short MA / swing boxes (user-defined).
No target or trail is guaranteed—market conditions change.
🧭 Visual Guide
#1. Input Selections Window:
#2. Bearish Patterns: Valid and Devaild rules for the Bearish Patterns
#3. Bullish Patterns: Valid and Devalied rules for the Bullish Patterns
#4. Spotted Bullish Harami Pattern & Trade Info label explained:
#5. Spotted Bearish Engulfing Pattern:
⚠️ Important Notes
⏱️ Timeframes : Works on all timeframes. For intraday, start 5m–15m; for swing, use 4h–1D. Evaluate on bar close .
✅ Instruments : Any OHLC market (Crypto/FX/Indices/Equities). Forward-adjusted data may show minor visual differences.
🧩 Hidden-Candle Mode : Detection follows reconstructed bars; visuals may differ from native candles.
🔔 Signal Lifecycle : Deterministic New → Validated → Devalidated . Levels reset to na when devalidated.
🚫 No Look-Ahead : No repainting after bar close. Intrabar values can update until the bar closes.
📊 Performance : High label/line counts can slow charts on lower TFs; reduce label size or toggle Trade Info if needed.
🔐 Conclusion and Access
This framework promotes a disciplined, rules-first approach to pattern-based trading: clear definitions, visible Validation/Devalidation levels, and explicit risk references.
👉 For how to request access, please see the Author’s Instructions section below.
🧾 Disclaimer
This script is intended solely for educational and informational purposes. It does not provide financial or investment advice, nor should it be interpreted as a recommendation to buy, sell, or trade any securities or derivatives.
We are not SEBI-registered advisors , and the strategies shown are not personalized guidance . Past performance or backtested results are not indicative of future outcomes and should not be relied upon for live trading without thorough evaluation.
Trading in financial markets—especially options—involves significant risk. Both profits and losses are inherent to the trading process.
Student wyckoff rs symbol/moexRelative Strength Indicator
Student wyckoff rs symbol/market v.2
Description
The Relative Strength (RS) Indicator compares the price performance of the current financial instrument (e.g., a stock) against another instrument (e.g., an index or another stock). It is calculated by dividing the closing price of the first instrument by the closing price of the second, then multiplying by 100. This provides a percentage ratio that shows how one instrument outperforms or underperforms another. The indicator helps traders identify strong or weak assets, spot market leaders, or evaluate an asset’s performance relative to a benchmark.
Key Features
Relative Strength Calculation: Divides the closing price of the current instrument by the closing price of the second instrument and multiplies by 100 to express the ratio as a percentage.
Simple Moving Average (SMA): Applies a customizable Simple Moving Average (default period: 14) to smooth the data and highlight trends.
Visualization: Displays the Relative Strength as a blue line, the SMA as an orange line, and colors bars (blue for rising, red for falling) to indicate changes in relative strength.
Flexibility: Allows users to select the second instrument via an input field and adjust the SMA period.
Applications
Market Comparison: Assess whether a stock is outperforming an index (e.g., S&P 500 or MOEX) to identify strong assets for investment.
Sector Analysis: Compare stocks within a sector or against a sector ETF to pinpoint leaders.
Trend Analysis: Use the rise or fall of the RS line and its SMA to gauge the strength of an asset’s trend relative to another instrument.
Trade Timing: Bar coloring helps quickly identify changes in relative strength, aiding short-term trading decisions.
Interpretation
Rising RS: Indicates the first instrument is outperforming the second (e.g., a stock growing faster than an index).
Falling RS: Suggests the first instrument is underperforming.
SMA as a Trend Filter: If the RS line is above the SMA, it may signal strengthening performance; if below, weakening performance.
Settings
Instrument 2: Ticker of the second instrument (default: QQQ).
SMA Period: Period for the Simple Moving Average (default: 14).
Notes
The indicator works on any timeframe but requires accurate ticker input for the second instrument.
Ensure data for both instruments is available on the selected timeframe for precise analysis.
Student wyckoff relative strength Indicator cryptoRelative Strength Indicator crypto
Student wyckoff rs symbol USDT.D
Description
The Relative Strength (RS) Indicator compares the price performance of the current financial instrument (e.g., a stock) against another instrument (e.g., an index or another stock). It is calculated by dividing the closing price of the first instrument by the closing price of the second, then multiplying by 100. This provides a percentage ratio that shows how one instrument outperforms or underperforms another. The indicator helps traders identify strong or weak assets, spot market leaders, or evaluate an asset’s performance relative to a benchmark.
Key Features
Relative Strength Calculation: Divides the closing price of the current instrument by the closing price of the second instrument and multiplies by 100 to express the ratio as a percentage.
Simple Moving Average (SMA): Applies a customizable Simple Moving Average (default period: 14) to smooth the data and highlight trends.
Visualization: Displays the Relative Strength as a blue line, the SMA as an orange line, and colors bars (blue for rising, red for falling) to indicate changes in relative strength.
Flexibility: Allows users to select the second instrument via an input field and adjust the SMA period.
Applications
Market Comparison: Assess whether a stock is outperforming an index (e.g., S&P 500 or MOEX) to identify strong assets for investment.
Sector Analysis: Compare stocks within a sector or against a sector ETF to pinpoint leaders.
Trend Analysis: Use the rise or fall of the RS line and its SMA to gauge the strength of an asset’s trend relative to another instrument.
Trade Timing: Bar coloring helps quickly identify changes in relative strength, aiding short-term trading decisions.
Interpretation
Rising RS: Indicates the first instrument is outperforming the second (e.g., a stock growing faster than an index).
Falling RS: Suggests the first instrument is underperforming.
SMA as a Trend Filter: If the RS line is above the SMA, it may signal strengthening performance; if below, weakening performance.
Settings
Instrument 2: Ticker of the second instrument (default: QQQ).
SMA Period: Period for the Simple Moving Average (default: 14).
Notes
The indicator works on any timeframe but requires accurate ticker input for the second instrument.
Ensure data for both instruments is available on the selected timeframe for precise analysis.
Liquidity Sweep ReversalOverview
The Liquidity Sweep Reversal indicator is a sophisticated intraday trading tool designed to identify high-probability reversal opportunities after liquidity sweeps occur at key market levels. Based on Smart Money Concepts (SMC) and Institutional Order Flow analysis, this indicator helps traders catch market reversals when stop-loss clusters are hunted.
Key Features
🎯 Multi-Level Liquidity Analysis
Previous Day High/Low (PDH/PDL) detection
Previous Week High/Low (PWH/PWL) tracking
Session highs/lows for Asian, London, and New York markets
Real-time level validation and usage tracking
⚡ Advanced Signal Generation
CISD (Change In State of Delivery) detection algorithm
Engulfing pattern recognition at key levels
Liquidity sweep confirmation system
Directional bias filtering to avoid false signals
⏰ Kill Zone Integration
Pre-configured optimal trading windows
Asian Kill Zone (20:00-00:00 EST)
London Kill Zone (02:00-05:00 EST)
New York AM/PM Kill Zones (08:30-11:00 & 13:30-16:00 EST)
Optional kill zone-only trading mode
🛠 Customization Options
Multiple timezone support (NY, London, Tokyo, Shanghai, UTC)
Flexible HTF (Higher Time Frame) selection
Adjustable signal sensitivity
Visual customization for all levels and signals
Hide historical signals option for cleaner charts
How It Works
The indicator continuously monitors price action around key liquidity levels
When price sweeps liquidity (stop-loss hunting), it marks potential reversal zones
Confirmation signals are generated through CISD or engulfing patterns
Trade signals appear as arrows with color-coded candles for easy identification
Best Suited For
Intraday traders focusing on 1m to 15m timeframes
Smart Money Concepts (SMC) practitioners
Scalpers looking for high-probability reversal entries
Traders who understand liquidity and market structure
Usage Tips
Works best on liquid forex pairs and major indices
Combine with volume analysis for stronger confirmation
Use proper risk management - not all signals will be winners
Monitor higher timeframe bias for better accuracy
==============================================
日内流动性掠夺反向开单指标
指标简介
这是一款基于Smart Money概念（SMC）开发的高级日内交易指标，专门用于识别市场在关键价格水平扫除流动性后的反转机会。通过分析机构订单流和流动性分布，帮助交易者精准捕捉止损扫单后的市场反转点。
核心功能
多维度流动性分析
前日高低点（PDH/PDL）自动标记
前周高低点（PWH/PWL）动态跟踪
亚洲、伦敦、纽约三大交易时段高低点识别
关键位使用状态实时监控，避免重复信号
智能信号系统
CISD（Change In State of Delivery）算法检测
关键位吞没形态识别
流动性扫除确认机制
方向过滤系统，大幅降低虚假信号
黄金交易时段
内置Kill Zone时间窗口
支持亚洲、伦敦、纽约AM/PM四个黄金时段
可选择仅在Kill Zone内交易
时区智能切换，全球交易者适用
个性化设置
支持多时区切换（纽约/伦敦/东京/上海/UTC）
HTF周期自动适配或手动选择
信号灵敏度可调
所有图表元素均可自定义样式
历史信号隐藏功能，保持图表整洁
适用人群
日内短线交易者（1分钟-15分钟）
SMC交易体系践行者
追求高胜率反转入场的投机者
理解流动性和市场结构的专业交易者
使用建议
推荐用于主流加密货币、外汇对和股指期货
配合成交量分析效果更佳
严格止损，理性对待每个信号
关注更高时间框架的趋势方向
风险提示： 任何技术指标都不能保证100%准确，请结合自己的交易系统和风险管理使用。
MarsCN10u S/R该指标通过识别价格的高低点来绘制支撑(S)和阻力(R)线及区域，帮助交易者识别潜在的价格反转区域。
自适应识别：自动识别重要的价格水平
可视化清晰：通过不同颜色区分支撑阻力
区域显示：提供价格区域而非单一线条
强度过滤：避免绘制过于弱小的S/R级别
动态更新：随着新价格数据不断更新S/R位置
注意事项
指标基于历史数据计算，S/R线会随着新数据而变化
强度参数越高，识别出的S/R级别越可靠但数量越少
区域宽度需要根据市场波动性适当调整
这个指标适合喜欢使用支撑阻力分析的交易者，特别是在寻找关键价格水平时提供可视化辅助。
This indicator identifies potential price reversal areas by plotting support (S) and resistance (R) lines and zones through the detection of price highs and lows.
Adaptive Identification: Automatically identifies significant price levels.
Clear Visualization: Distinguishes support and resistance with different colors.
Zone Display: Provides price zones instead of single lines.
Strength Filtering: Avoids plotting overly weak S/R levels.
Dynamic Updates: Continuously adjusts S/R positions as new price data emerges.
Notes
The indicator calculates based on historical data, and S/R lines may change with new data.
Higher strength parameters yield more reliable but fewer S/R levels.
Zone width should be adjusted according to market volatility.
This is for reference only and does not constitute investment advice.
This indicator is suitable for traders who utilize support and resistance analysis, particularly providing visual assistance in identifying key price levels.
T-SpotT-Spot is a concept created by TTrades. "By blending the logic of equilibrium, candle closures, and shifts in trend, the T-Spot was created. I created it as a way to identify where the HTF wick is likely to form during market expansions. This logic was then coded into my indicator to save me time in marking it up. Using the T-spot as the area, I'm looking for the HTF wick to form."
Example -
The previous 1H candle closed bullish, T-Spot indicator will mark out the High, Low, and 0.5 of it
Lectura de VelasScript designed to display, on a panel as shown, the candlestick readings for Weekly, Daily, 4-hour, and 1-hour timeframes
RVM LLS Signal DetectorThe indicator detects long lower wick candle and gives indicator to buy points. Proper risk reward needs to be managed to make the indicator work
Trend Score Stop Loss Trend Score Indicator Guide
This indicator is designed for futures trading during RTH (Regular Trading Hours, 9:30–16:00 NY time). It’s an all-in-one bull/bear trend system with built-in stop loss logic — simple, objective, and always active.
⸻
🔹 How Trend Score Works
• The trend score is calculated only during RTH and resets at the start of each new session.
• Each candle contributes to the score as follows:
• ✅ Breaks previous high → +1
• ❌ Breaks previous low → –1
• ⚖️ Breaks both high and low → 0 (–1 + 1 cancel out)
• 💤 Breaks neither high nor low → 0
⸻
🔹 Determining the First Trend
• The first valid session trend is established when the cumulative score hits +3 or –3.
• +3 → Start of a Bull Trend
• –3 → Start of a Bear Trend
⚠️ Note: The indicator requires at least 3 candles to generate the first +3/–3 sequence.
👉 This means the first 3 minutes of the open (9:30–9:33) are ignored — a natural filter that avoids the most volatile/noisy part of the day.
⸻
🔹 Stop Loss vs. Trend Change
These are two separate events:
• Stop Loss
• A stop level is drawn at the candle that initiated the +3 or –3 trigger.
• This line is only a visual suggestion — it does not force an exit.
• Real-world stop placement depends on your own discretion, factoring in position size, volatility, and strategy.
• Hitting this level does not automatically mean the trend is over.
• Trend Change
• The trend only reverses when the opposite direction accumulates 3 points.
• Example: In a Bull trend, the system flips to Bear only when a –3 sequence occurs (and vice versa).
• A trend change can happen before or without the stop loss ever being hit.
⸻
🔹 Key Features
• ✅ Active only during RTH (9:30–16:00 NY) — no overnight distortions.
• 🔄 Auto-reset daily at the start of each session.
• 🟢🔴 Always in a trend — continuously switches between Bull and Bear.
• 🛡️ Stop loss marked visually — but final risk management is trader’s choice.
• ⏳ Avoids first 3 minutes of open — naturally filters volatility & false signals.
⸻
✨ In short:
The Trend Score Indicator transforms simple high/low breaks into a rule-based trend framework. You’ll always know if the market is in a bull or bear phase, where the suggested stop loss lies, and when a true trend reversal occurs — while still leaving risk management decisions in your hands.
⸻
For better user experience:
Deselect danger score, delta per bar, slope m10, panel label in the style tap. These are used for the calculation purpose only.
You can also change your session time to 1800 to 1600, however it may not work well in ETH session.
