始めましょう

Candlestick analysis

Smart Multi-Confirm Reversal DetectorHow the Smart Multi-Confirm Reversal Detector Works The indicator works by analyzing candlestick patterns, trend, and technical confirmations and then scoring each bar to determine the strength of a potential reversal. Here’s the step-by-step logic: Step 1: Analyze Candlestick Patterns For each new candle, the indicator checks if any of the selected patterns occur: Wick Reversal (Long Lower Wick): Looks for candles with a small body and a long lower shadow. Indicates buying pressure (potential bullish reversal). Inverted Wick (Long Upper Wick): Looks for candles with a small body and a long upper shadow. Indicates selling pressure (potential bearish reversal). Body Engulf: The current candle completely “engulfs” the previous candle. Signals a strong change in momentum. Tweezer Patterns: Two consecutive candles with almost identical highs or lows. Suggests a potential reversal zone. 3-Bar Pattern: Three consecutive bullish or bearish candles in a row. Shows strong momentum continuation or exhaustion, used to confirm reversal. Each pattern can be turned on/off by the user. If a pattern is detected, it contributes points to the overall signal score. Step 2: Confirm Trend Direction The indicator checks EMA trend alignment: Fast EMA vs Slow EMA: Fast EMA above Slow EMA → bullish trend. Fast EMA below Slow EMA → bearish trend. Optional Higher Timeframe EMA (HTF) Alignment: Checks if the trend on a higher timeframe matches the current trend. Adds extra weight to the signal if alignment is true. This ensures the signal goes in the direction of the prevailing trend, reducing false signals. Step 3: Check Technical Confirmations Optional filters increase reliability: ADX (Average Directional Index): Measures the strength of the current trend. Only strong trends contribute to the score. RSI (Relative Strength Index): Bullish confirmation: RSI is oversold. Bearish confirmation: RSI is overbought. Volume Spike: Compares current volume to the average volume. High volume validates the signal’s momentum. Body Momentum: Compares current candle’s body size to its average. Larger than average body indicates stronger momentum. Each of these confirmations can be enabled/disabled and has a weight in the scoring system. Step 4: Calculate Score Each pattern and confirmation has a user-defined weight (0–100). The indicator sums the active weights that pass conditions and normalizes to 100. Example: Wick Reversal detected → 30 points Trend EMA confirmed → 15 points ADX confirmed → 10 points Score = 55/100 → may or may not trigger a signal depending on threshold. Score Threshold: Only bars above the user-defined threshold are considered a confirmed signal. Bars above a lower “label threshold” still show a label, even if not strong enough for alerts. Step 5: Visualize Signals Bullish Signals: Green triangle below the candle. Bearish Signals: Red triangle above the candle. Labels: Show the type of pattern and the score. Purpose: Quickly identify potential reversals and assess their strength visually. Step 6: Optional Alerts Fixed alert messages can be enabled for confirmed bullish or bearish signals. Alerts do not recommend trades; they just notify you of pattern confirmations. Complies with TradingView’s policy for safe alert use. Step 7: Weighted Decision The final decision is not binary. Instead, the indicator combines multiple signals into a score, so stronger signals are more reliable. This reduces false positives and gives traders a professional, multi-confirmation approach to detect potential reversals.
Pine Script® インジケーター
tradingbauhausの投稿
gfg//@version=5 indicator("Lux Gainz Style Algo", overlay=true) // User Inputs fastLen = input.int(12, "Fast MA Length", minval=1) slowLen = input.int(26, "Slow MA Length", minval=1) rsiLen = input.int(14, "RSI Length", minval=1) rsiOverbought = input.float(70, "RSI Overbought Level") rsiOversold = input.float(30, "RSI Oversold Level") sensitivity = input.float(1.5, "Signal Sensitivity", minval=0.1, step=0.1) // Moving Averages for Trend fastMA = ta.ema(close, fastLen) slowMA = ta.ema(close, slowLen) // RSI for Momentum rsi = ta.rsi(close, rsiLen) // Trend Conditions bullTrend = fastMA > slowMA bearTrend = fastMA < slowMA // Confirmation Signals longSignal = ta.crossover(fastMA, slowMA) and rsi < rsiOversold * sensitivity shortSignal = ta.crossunder(fastMA, slowMA) and rsi > rsiOverbought / sensitivity // Plot Moving Averages plot(fastMA, color=color.new(color.green, 0), title="Fast EMA") plot(slowMA, color=color.new(color.red, 0), title="Slow EMA") // Candle Coloring for Trend Strength barcolor(bullTrend ? color.new(color.green, 70) : bearTrend ? color.new(color.red, 70) : color.gray) // Plot Buy/Sell Signals plotshape(longSignal, title="Buy Signal", location=location.belowbar, color=color.green, style=shape.labelup, size=size.small) plotshape(shortSignal, title="Sell Signal", location=location.abovebar, color=color.red, style=shape.labeldown, size=size.small) // Alerts alertcondition(longSignal, title="Long Entry", message="Lux Gainz Algo: Long Entry Signal") alertcondition(shortSignal, title="Short Entry", message="Lux Gainz Algo: Short Entry Signal")
Pine Script® インジケーター
miyaniakshar798の投稿
Block-Based Trend Breakout (YTK/DTK) – v1📌 Overview Block Trend Breakout (YTK/DTK) is a lightweight, rule-based indicator that detects potential trend reversals or volatility bursts by tracking breakouts of key structural support/resistance levels — derived from block-wise trend patterns. The logic is simple yet effective: if a trend has been confirmed across multiple blocks (custom-length bar groups), and the price breaks its own structural boundary, a potential reversal or volatility signal is triggered. 🟥 YTK (Uptrend Breakdown) → Price breaks below the lowest low of the most recent block in an uptrend. 🟩 DTK (Downtrend Breakout) → Price breaks above the highest high of the most recent block in a downtrend. 🔍 How It Works Block Construction: User-defined bar groups (e.g., 6 bars on a 4H chart = 24H blocks). Trend Validation: At least N consecutive blocks must show higher highs/lows (uptrend) or lower highs/lows (downtrend). Breakout Test: If the current bar violates the structural limit (MR block high/low), the corresponding signal is plotted. 📉 This logic identifies weakening trends or failed momentum, often preceding reversals or volatility expansions. ⚙️ Features Adjustable block size and trend confirmation count Option to use only closed bars (to reduce repaint risk) Inclusive mode for “<= / >=” logic Visual signals: MR Block high/low levels Trend-colored bars Arrows for YTK (🔻) and DTK (🔺) Built-in alerts for automated strategies 🎯 Use Cases Spotting fakeouts and false breakouts Identifying trend exhaustion before reversal Confirming structural support/resistance breaks Visual tool for discretionary traders Signal generator for automated systems 💬 Feedback & Contributions This script is open-source and community-driven. We actively welcome feedback, ideas, improvements, forks, and questions. 📩 Contact for collaboration or discussion: 📧 senbrke@gmail.com
Pine Script® インジケーター
senbrkeの投稿
FVG SuiteSupercharge your charts with FVG Suite! Detect Smart Money structures, Fair Value Gaps, and key Multi-Timeframe levels—all in one powerful indicator. Perfect for both intraday and swing traders. ⚡ Highlights: 📈 Smart Money Structure: BoS & CHoCH signals with customizable colors and sensitivity. 💎 Fair Value Gaps: Bullish & Bearish FVGs with filters, max extension, and automatic cleanup. 🕒 Multi-Timeframe Levels: Daily, Weekly, and Monthly Highs & Lows with solid/dashed/dotted lines. 📊 Volume Activity: Real-time 4H & 24H volume analysis in a neat table. 🎨 Fully Customizable: Colors, transparency, and labels for a clean, easy-to-read chart. Make smarter trade decisions with clear market structure insights and gap detection! 🚀
Pine Script® インジケーター
NovaTradeStarの投稿
Volume Heat ZoneVolume Zones Indicator This Pine Script creates a volume-based zone analysis tool for TradingView. Function: Divides the price range (high to low) into 20 levels over a 100-candle lookback period Measures volume activity at each price level Draws boxes at levels with above-average volume (1.5x threshold) Key Settings: Lookback Period (100): Number of candles analyzed Price Levels (20): Price range subdivisions Volume Threshold (1.5): Minimum volume multiplier for zones Candle Offset (1): Excludes current candle from analysis Projection Bars (10): Extends boxes 10 bars into the future How it works: The indicator identifies price levels where significant trading volume occurred historically, highlighting potential support/resistance zones. Boxes are redrawn on each confirmed candle, showing dynamic volume concentration areas that traders can use for entry/exit decisions.
Pine Script® インジケーター
trading_zone42の投稿
Advanced Pattern Detection System [50+ Patterns]【Advanced Pattern Detection System - Auto-detects 50+ Chart Patterns】 Introducing the most powerful pattern detection indicator for TradingView! ◆ What is this? An automated tool that finds and displays over 50 chart patterns on your charts. It detects all the patterns professional traders use - Double Tops, Triangles, Head & Shoulders, and more - all in ONE indicator. ◆ Main Features ・Detects 50+ patterns in real-time ・Shows visual explanation of WHY each pattern was identified ・Automatically calculates theoretical target prices ・Displays confidence levels in % (60-95%) ・Choose panel position from 9 locations ・Works on all timeframes (1min to Monthly) ◆ Detectable Patterns 1. Classic Patterns (Double Top/Bottom, Head & Shoulders, etc.) 2. Triangle Patterns (Ascending, Descending, Symmetrical, Expanding) 3. Continuation Patterns (Flags, Pennants, Wedges, etc.) 4. Harmonic Patterns (Gartley, Butterfly, Bat, etc.) 5. Price Action (Pin Bar, Engulfing, Hammer, etc.) 6. Special Patterns (Cup & Handle, V-formations, etc.) ◆ What Makes It Different ・Not just detection - shows the reasoning behind it ・Auto-draws pivot points and necklines ・Displays target prices with % gain/loss from current price ・Detects multiple patterns simultaneously, sorted by confidence ・Available in both Japanese and English versions ◆ Perfect For ✓ Anyone tired of using multiple indicators ✓ Beginners wanting to learn pattern trading ✓ Traders who don't want to miss entry points ✓ Those looking to improve discretionary trading accuracy ◆ How to Use (Easy 3 Steps) 1. Open TradingView and paste code in Pine Editor 2. Click "Add to Chart" 3. Enable only the patterns you need in settings ◆ Color Meanings Green → Bullish potential (Buy signal) Red → Bearish potential (Sell signal) Yellow → Neutral direction (Wait and see) ◆ Recommended Settings Scalping: Detection period 20, Sensitivity 0.0025 Day Trading: Detection period 50, Sensitivity 0.002 Swing Trading: Detection period 100, Sensitivity 0.0015 ◆ Real Trading Example "Detects Double Bottom → 85% confidence → Enter on neckline break → Take profit at displayed target price" This is how you can use it in practice. ◆ Important Notes ・This is an analysis tool, not investment advice ・Always combine with other indicators ・Always set stop losses ・Practice on demo account before live trading ◆ Performance If running slow, turn OFF unused pattern categories. Reducing max display count to 3 also helps. ◆ Summary This single tool provides functionality that would normally require multiple paid indicators (worth $100-200 total). It's the ultimate pattern detection system recommended for all traders, from beginners to professionals. Give it a try if interested! Feel free to ask questions in the comments.
Pine Script® インジケーター
Hunk77の投稿
7
Ai Golden Support and Resistance Adaptive Support & Resistance (ADR-scaled ABCD + Breakout/Retest Zones) What it does This indicator detects actionable support/resistance zones from swing structure and breakout events, then keeps each zone active until it’s invalidated by price. It adapts zone sensitivity using Average Daily Range (ADR) so the same rules scale across symbols and vol regimes. Core Logic (high level) Swing & ABCD pattern seed Detects alternating pivots (high–low–high–low or low–high–low–high) using a user-selected lookback. Validates basic AB–BC–CD proportions: BC must retrace a portion of AB; CD must extend BC within a set range. From a valid sequence, sets a candidate level (top for bearish, bottom for bullish). Breakout confirmation A level becomes confirmed when price closes beyond it (crossover/crossunder). On confirmation, the script draws a dotted reference line and records how many bars elapsed from the seed pivot to breakout. That count defines the lookback window used for local extremes. Zone construction Supply (bearish): builds a box around the most recent local range near the bearish seed; Demand (bullish): builds a box around the most recent local range near the bullish seed. Each zone’s height is derived from nearby extremes and the seed swing, so boxes reflect local structure rather than fixed pip widths. Volatility normalization (ADR%) ADR is computed from daily candles. The Risk Profile input (“High/Medium/Low”) scales required move sizes using ADR%, and adjusts pivot sensitivity (fewer/more bars). Higher risk → more sensitive (smaller ADR %, tighter pivot lookback). Lower risk → stricter filters (larger ADR %, wider pivot lookback). Explosive-move filter (streak logic) Searches the seeded lookback for consecutive same-color candles (config via the risk profile). Requires the cumulative % move of that streak to exceed an ADR-scaled threshold. When found, the zone is tagged as originating from an “explosive” move (potentially higher reaction probability). Zone persistence & invalidation Zones persist and auto-extend to the right until invalidated. Invalidation occurs when price closes through a rule-based threshold derived from the seed structure (stored per zone). Once invalidated, the zone is marked inactive and stops updating. Inputs & Controls Risk Profile: High / Medium / Low (sets pivot lookback, streak length, and ADR% thresholds). Labels & Visuals: Toggle labels and level lines; set line width. Colors/Boxes: Supply (red), Demand (green); dotted breakout references. No broker/session settings are required; the script adapts per symbol via ADR. On-Chart Elements Dotted breakout lines at confirmed levels (with measured bars-to-breakout). Supply/Demand boxes that extend until invalidation. Optional labels for clarity; minimal clutter by default. How to Use Context: Use higher-TF context for bias; apply zones on your trading TF. Confluence: Combine zones with your own triggers (structure breaks, rejection wicks, momentum shifts). Invalidation: If price closes beyond a zone’s invalidation threshold, treat that zone as inactive. Sensitivity: If too many zones appear, switch to Medium/Low Risk (stricter ADR% & pivots); if too few, use High Risk. Notes & Limitations Logic is rule-based; there is no machine learning. Daily ADR is computed from D timeframe, so intraday charts inherit daily volatility context. Results vary by symbol and timeframe; validate settings per market. This is an indicator (no orders or P/L).
Pine Script® インジケーター
GoldenCryptoSignalsの投稿
P/B Ratio (Per Share) vs Median + Bollinger Band- 📝 This indicator highlights potential buying opportunities by analyzing the Price-to-Book (P/B) ratio in relation to Bollinger Bands and its historical median. - 🎯 The goal is to provide a visually intuitive signal for value-oriented entries, especially when valuation compression aligns with historical context. - 💡 Vertical green shading is applied when the P/B ratio drops below the lower Bollinger Band, which is calculated directly from the P/B ratio itself — not price. This condition often signals the ticker may be oversold. - 🟢 Lighter green appears when the ratio is below the lower band but above the median, suggesting a possible shorter-term entry with slightly more risk. - 🟢 Darker green appears when the ratio is both below the lower band and below the median, pointing to a potentially stronger, longer-term value entry. - ⚠️ This logic was tested using 1 and 2-day time frames. It may not be as helpful in longer time frames, as the financial data TradingView pulls in begins in Q4 2017. - ⚠️ Note: This script relies on financial data availability through TradingView. It may not function properly with certain tickers — especially ETFs, IPOs, or thinly tracked assets — where P/S ratio data is missing or incomplete. - ⚠️ This indicator will not guarantee successful results. Use in conjunction with other indicators and do your due diligence. - 🤖 This script was iteratively refined with the help of AI to ensure clean logic, minimalist design, and actionable signal clarity. - 📢 Idea is based on the script "Historical PE ratio vs median" by haribotagada - 💬 Questions, feedback, or suggestions? Drop a comment — I’d love to hear how you’re using it or what you'd like to see changed.
Pine Script® インジケーター
traceockingaの投稿
J12Matic Builder by galgoomA flexible Renko/tick strategy that lets you choose between two entry engines (Multi-Source 3-way or QBand+Moneyball), with a unified trailing/TP exit engine, NY-time trading windows with auto-flatten, daily profit/loss and trade-count limits (HALT mode), and clean webhook routing using {{strategy.order.alert_message}}. Highlights Two entry engines Multi-Source (3): up to three long/short sources with Single / Dual / Triple logic and optional lookback. QBand + Moneyball: Gate → Trigger workflow with timing windows, OR/AND trigger modes, per-window caps, optional same-bar fire. Unified exit engine: Trailing by Bricks or Ticks, plus optional static TP/SL. Session control (NY time): Evening / Overnight / NY Session windows; auto-flatten at end of any enabled window. Day controls: Profit/Loss (USD) and Trade-count limits. When hit, strategy HALTS new entries, shows an on-chart label/background. Alert routing designed for webhooks: Every order sets alert_message= so you can run alerts with: Condition: this strategy Notify on: Order fills only Message: {{strategy.order.alert_message}} Default JSONs or Custom payloads: If a Custom field is blank, a sensible default JSON is sent. Fill a field to override. How to set up alerts (the 15-second version) Create a TradingView alert with this strategy as Condition. Notify on: Order fills only. Message: {{strategy.order.alert_message}} (exactly). If you want your own payloads, paste them into Inputs → 08) Custom Alert Payloads. Leave blank → the strategy sends a default JSON. Fill in → your text is sent as-is. Note: Anything you type into the alert dialog’s Message box is ignored except the {{strategy.order.alert_message}} token, which forwards the payload supplied by the strategy at order time. Publishing notes / best practices Renko users: Make sure “Renko Brick Size” in Inputs matches your chart’s brick size exactly. Ticks vs Bricks: Exit distances switch instantly when you toggle Exit Units. Same-bar flips: If enabled, a new opposite signal will first close the open trade (with its exit payload), then enter the new side. HALT mode: When day profit/loss limit or trade-count limit triggers, new entries are blocked for the rest of the session day. You’ll see a label and a soft background tint. Session end flatten: Auto-closes positions at window ends; these exits use the “End of Session Window Exit” payload. Bar magnifier: Strategy is configured for on-close execution; you can enable Bar Magnifier in Properties if needed. Default JSONs (used when a Custom field is empty) Open: {"event":"open","side":"long|short","symbol":""} Close: {"event":"close","side":"long|short|flat","reason":"tp|sl|flip|session|limit_profit|limit_loss","symbol":""} You can paste any text/JSON into the Custom fields; it will be forwarded as-is when that event occurs. Input sections — user guide 01) Entries & Signals Entry Logic: Choose Multi-Source (3) or QBand + Moneyball (pick one). Enable Long/Short Signals: Master on/off switches for entering long/short. Flip on opposite signal: If enabled, a new opposite signal will close the current position first, then open the other side. Signal Logic (Multi-Source): Single: any 1 of the 3 sources > 0 Dual: Source1 AND Source2 > 0 Triple (default): 1 AND 2 AND 3 > 0 Long/Short Signal Sources 1–3: Provide up to three series (often indicators). A positive value (> 0) is treated as a “pulse”. Use Lookback: Keeps a source “true” for N bars after it pulses (helps catch late triggers). Long/Short Lookback (bars): How many bars to remember that pulse. 01b) QBands + Moneyball (Gate -> Trigger) Allow same-bar Gate->Trigger: If ON, a trigger can fire on the same bar as the gate pulse. Trigger must fire within N bars after Gate: Size of the gate window (in bars). Max signals per window (0 = unlimited): Cap the number of entries allowed while a gate window is open. Buy/Sell Source 1 – Gate: Gate pulse sources that open the buy/sell window (often a regime/zone, e.g., QBands bull/bear). Trigger Pulse Mode (Buy/Sell): How to detect a trigger pulse from the trigger sources (Change / Appear / Rise>0 / Fall<0). Trigger A/B sources + Extend Bars: Primary/secondary triggers plus optional extension to persist their pulse for N bars. Trigger Mode: Pick S2 only, S3 only, S2 OR S3, or S2 AND S3. AND mode remembers both pulses inside the window before firing. 02) Exit Units (Trailing/TP) Exit Units: Choose Bricks (Renko) or Ticks. All distances below switch accordingly. 03) Tick-based Trailing / Stops (active when Exit Units = Ticks) Initial SL (ticks): Starting stop distance from entry. Start Trailing After (ticks): Start trailing once price moves this far in your favor. Trailing Distance (ticks): Offset of the trailing stop from peak/trough once trailing begins. Take Profit (ticks): Optional static TP distance. Stop Loss (ticks): Optional static SL distance (overrides trailing if enabled). 04) Brick-based Trailing / Stops (active when Exit Units = Bricks) Renko Brick Size: Must match your chart’s brick size. Initial SL / Start Trailing After / Trailing Distance (bricks): Same definitions as tick mode, measured in bricks. Take Profit / Stop Loss (bricks): Optional static distances. 05) TP / SL Switch Enable Static Take Profit: If ON, closes the trade at the fixed TP distance. Enable Static Stop Loss (Overrides Trailing): If ON, trailing is disabled and a fixed SL is used. 06) Trading Windows (NY time) Use Trading Windows: Master toggle for all windows. Evening / Overnight / NY Session: Define each session in NY time. Flatten at End of : Auto-close any open position when a window ends (sends the Session Exit payload). 07) Day Controls & Limits Enable Profit Limits / Profit Limit (Dollars): When daily net PnL ≥ limit → auto-flatten and HALT. Enable Loss Limits / Loss Limit (Dollars): When daily net PnL ≤ −limit → auto-flatten and HALT. Enable Trade Count Limits / Number of Trades Allowed: After N entries, HALT new entries (does not auto-flatten). On-chart HUD: A label and soft background tint appear when HALTED; a compact status table shows Day PnL, trade count, and mode. 08) Custom Alert Payloads (used as strategy.order.alert_message) Long/Short Entry: Payload sent on entries (if blank, a default open JSON is sent). Regular Long/Short Exit: Payload sent on closes from SL/TP/flip (if blank, a default close JSON is sent). End of Session Window Exit: Payload sent when any enabled window ends and positions are flattened. Profit/Loss/Trade Limit Close: Payload sent when daily profit/loss limit causes auto-flatten. Tip: Any tokens you include here are forwarded “as is”. If your downstream expects variables, do the substitution on the receiver side. Known limitations No bracket orders from Pine: This strategy doesn’t create OCO/attached brackets on the broker; it simulates exits with strategy logic and forwards your payloads for external automation. alert_message is per order only: Alerts fire on order events. General status pings aren’t sent unless you wire a separate indicator/alert. Renko specifics: Backtests on synthetic Renko can differ from live execution. Always forward-test on your instrument and settings. Quick checklist before you publish ✅ Brick size in Inputs matches your Renko chart ✅ Exit Units set to Bricks or Ticks as you intend ✅ Day limits/Windows toggled as you want ✅ Custom payloads filled (or leave blank to use defaults) ✅ Your alert uses Order fills only + {{strategy.order.alert_message}}
Pine Script® ストラテジー
galgoomの投稿
P/E Ratio vs Median + Bollinger Band- 📝 This indicator highlights potential buying opportunities by analyzing the Price-to-Earnings (P/E) ratio in relation to Bollinger Bands and its historical median. - 🎯 The goal is to provide a visually intuitive signal for value-oriented entries, especially when valuation compression aligns with historical context. - 💡 Vertical green shading is applied when the P/E ratio drops below the lower Bollinger Band, which is calculated directly from the P/E ratio itself — not price. This condition often signals the ticker may be oversold. - 🟢 Lighter green appears when the ratio is below the lower band but above the median, suggesting a possible shorter-term entry with slightly more risk. - 🟢 Darker green appears when the ratio is both below the lower band and below the median, pointing to a potentially stronger, longer-term value entry. - ⚠️ This logic was tested using 1 and 2-day time frames. It may not be as helpful in longer time frames, as the financial data TradingView pulls in begins in Q4 2017. - ⚠️ Note: This script relies on financial data availability through TradingView. It may not function properly with certain tickers — especially ETFs, IPOs, or thinly tracked assets — where P/S ratio data is missing or incomplete. - ⚠️ This indicator will not guarantee successful results. Use in conjunction with other indicators and do your due diligence. - 🤖 This script was iteratively refined with the help of AI to ensure clean logic, minimalist design, and actionable signal clarity. - 📢 Idea is based on the script "Historical PE ratio vs median" by haribotagada - 💬 Questions, feedback, or suggestions? Drop a comment — I’d love to hear how you’re using it or what you'd like to see changed.
Pine Script® インジケーター
traceockingaの投稿
P/S Ratio vs Median + Bollinger Band- 📝 This indicator highlights potential buying opportunities by analyzing the Price-to-Sales (P/S) ratio in relation to Bollinger Bands and its historical median. - 🎯 The goal is to provide a visually intuitive signal for value-oriented entries, especially when valuation compression aligns with historical context. - 💡 Vertical green shading is applied when the P/S ratio drops below the lower Bollinger Band, which is calculated directly from the P/S ratio itself — not price. This condition often signals the ticker may be oversold. - 🟢 Lighter green appears when the ratio is below the lower band but above the median, suggesting a possible shorter-term entry with slightly more risk. - 🟢 Darker green appears when the ratio is both below the lower band and below the median, pointing to a potentially stronger, longer-term value entry. - ⚠️ This logic was tested using 1 and 2-day time frames. It may not be as helpful in longer time frames, as the financial data TradingView pulls in begins in Q4 2017. - ⚠️ Note: This script relies on financial data availability through TradingView. It may not function properly with certain tickers — especially ETFs, IPOs, or thinly tracked assets — where P/S ratio data is missing or incomplete. - ⚠️ This indicator will not guarantee successful results. Use in conjunction with other indicators and do your due diligence. - 🤖 This script was iteratively refined with the help of AI to ensure clean logic, minimalist design, and actionable signal clarity. - 📢 Idea is based on the script "Historical PE ratio vs median" by @haribotagada - 💬 Questions, feedback, or suggestions? Drop a comment — I’d love to hear how you’re using it or what you'd like to see changed.
Pine Script® インジケーター
traceockingaの投稿
Spreads CCC/BBB/AAA vs Treasury 10Y//@version=5 indicator("Spreads CCC/BBB/AAA vs Treasury 10Y", overlay=false) // Tickes de ejemplo (debes reemplazar con los que tengas disponibles en TradingView) ccc = request.security("XCCC", "D", close) // High Yield CCC bbb = request.security("LQD", "D", close) // Investment Grade BBB aaa = request.security("QLTA", "D", close) // AAA treasury = request.security("US10Y", "D", close) // US Treasury 10Y // Cálculo del spread (yield bono - yield Treasury) spread_ccc = ccc - treasury spread_bbb = bbb - treasury spread_aaa = aaa - treasury // Umbral para alerta de riesgo umbral = input.float(2.0, "Umbral spread (%)") // Plot de los spreads plot(spread_ccc, color=color.red, title="Spread CCC") plot(spread_bbb, color=color.orange, title="Spread BBB") plot(spread_aaa, color=color.green, title="Spread AAA") // Señal visual cuando el spread supera el umbral plotshape(spread_ccc > umbral, title="Alerta CCC", color=color.red, style=shape.triangledown, location=location.abovebar, size=size.tiny) plotshape(spread_bbb > umbral, title="Alerta BBB", color=color.orange, style=shape.triangledown, location=location.abovebar, size=size.tiny) plotshape(spread_aaa > umbral, title="Alerta AAA", color=color.green, style=shape.triangledown, location=location.abovebar, size=size.tiny)
Pine Script® インジケーター
fitbazerの投稿
Momentum Fusion Pro X Elite1️⃣ Impulse Detection Purpose: Identify fast, significant price movements that could provide entry opportunities. upImpulse: Triggered when the current candle breaks above the high from 2 candles ago and closes above that level. downImpulse: Triggered when the current candle breaks below the low from 2 candles ago and closes below that level. confirmLong / confirmShort: Only consider candles that close above/below the impulse level to reduce false signals. Visualization: Boxes and lines mark the impulse zones on the chart. Explanation: “We mark zones where the price shows clear momentum, helping spot potential entry points.” 2️⃣ Trend Filters Purpose: Trade in the direction of the main trend. EMA Fast & Slow: Determine the current timeframe trend. EMA Multi-Timeframe (HTF): Confirms the trend on a higher timeframe. trendHTF: Combines EMA, RSI, and CCI from the higher timeframe for stronger trend confirmation. Explanation: “We only take trades aligned with the current trend and the higher timeframe trend.” 3️⃣ Momentum & Volatility Filters Purpose: Ensure the move has strength before entering. RSI & CCI: Confirm momentum and avoid overbought/oversold extremes. Volume: Only consider candles with above-average volume. VWAP: Confirms price is above/below VWAP for bullish/bearish validation. ATR / Volatility: Only enter trades if candle size exceeds a multiple of ATR to filter weak moves. Explanation: “This ensures entries occur during strong and validated moves, not weak or fake breakouts.” 4️⃣ Signal Scoring System Purpose: Increase signal reliability by combining multiple filters. Each filter contributes 1 point: impulse confirmation, EMA trend, HTF trend, RSI, CCI, volume, VWAP, and volatility. minScore: Minimum number of filters required for a signal (default 6 out of 8). finalLong / finalShort: Signals only appear if they meet or exceed the minimum score. Explanation: “Signals are shown only when most indicators agree, reducing false positives.” 5️⃣ Chart Visualization Green / Red triangles: Strong long or short signals. Boxes and lines: Show impulse zones for support/resistance levels. Explanation: “Arrows indicate high-probability trades, while zones help identify key price levels.” 6️⃣ Dashboard Configurable position: Top Right, Bottom Right, Bottom Left. Shows: Number of detected impulse signals Signal strength (longScore / shortScore) Trend direction of higher timeframe Explanation: “Quickly assess signal strength and trend without analyzing each indicator individually.” 7️⃣ Adjustable Parameters EMA lengths and Trend Window RSI / CCI periods and overbought/oversold levels Volume average and ATR multiplier for volatility Higher timeframe trend confirmation Minimum active filters for signal validity Explanation: “You can customize the indicator for conservative or aggressive trading styles.” ⚠️ Disclaimer This indicator is for educational purposes only and does not guarantee profits. Trading involves risk, and users should trade responsibly and at their own risk.
Pine Script® インジケーター
tradingbauhausの投稿
🔥 MomentumWave HA Trend1. Heikin Ashi Candles The indicator calculates Heikin Ashi candles to smooth price movements. Heikin Ashi reduces market noise, making it easier to spot trends than regular candlesticks. Bullish candle: close > open → green-ish candle. Bearish candle: close < open → red-ish candle. 2. Exponential Moving Averages (EMA) Two EMAs are plotted on the chart: fast EMA and slow EMA. Fast EMA: reacts quickly to recent price changes. Slow EMA: shows the overall trend. When fast EMA > slow EMA → market is trending up. When fast EMA < slow EMA → market is trending down. 3. Momentum Filters EMA slope: the indicator checks if the fast EMA is rising or falling to confirm momentum. ROC (Rate of Change): ensures price movement is strong in the current direction. RSI filter: prevents signals when the market is overbought or oversold. RSI above lower bound → allows bullish trend. RSI below upper bound → allows bearish trend. 4. Optional MACD Filter If enabled, the indicator uses the MACD slope to confirm trend strength. This reduces false signals in weak trend periods. 5. Confirmation of Consecutive Candles The indicator requires a certain number of consecutive Heikin Ashi candles in the same direction before generating a signal. This avoids acting on a single volatile candle and increases accuracy. 6. Cooldown Period After a signal is generated, a cooldown period prevents immediate repeated signals. This reduces overtrading in volatile markets. 7. Signals TREND-RISE (triangle below candle): indicates a confirmed bullish trend. TREND-FALL (triangle above candle): indicates a confirmed bearish trend. Alerts can be set for both signals to notify you in real time. 8. How to Use Open a chart and add the MomentumWave HA Trend indicator. Look at the EMA fast (teal) and EMA slow (maroon) lines. Wait for a signal: TREND-RISE: consider long positions or buying opportunities. TREND-FALL: consider short positions or selling opportunities. Check RSI and MACD (if enabled) to confirm signal strength. Observe consecutive Heikin Ashi candle confirmation. Respect the cooldown period before opening another position. Apply risk management (stop-loss, position size) based on your strategy. 9. Disclaimer This indicator is a technical analysis tool and does not guarantee profits. Always use proper risk management and validate signals with your own analysis before trading.
Pine Script® インジケーター
tradingbauhausの投稿
BTC/USD 3分バイナリー予測【完全修正版v7.2】## BTC/USD 3-Minute Binary Prediction Indicator v7.2 Documentation ### Overview This indicator predicts whether BTCUSD price will move ±$25 or more within 3 minutes using a 5-layer filter system and pattern recognition. Designed for 30-second timeframe analysis with statistical tracking. ### ⚠️ Critical Warnings - **This is a prediction tool, NOT a profit guarantee** - **30-second timeframe ONLY** (Will not function correctly on other timeframes) - **BTCUSD pair ONLY** - **Past performance does not guarantee future results** - **Test thoroughly in demo before live trading** - **You can lose your entire investment** ### Core Components #### 1. Five-Layer Filter System ``` Layer 1: Trend Alignment (25 points) - EMA configuration analysis Layer 2: Indicator Confluence (25 points) - RSI + MACD confirmation Layer 3: Volume Analysis (20 points) - Abnormal volume detection Layer 4: Key Levels (15 points) - Support/Resistance proximity Layer 5: Momentum (15 points) - Price acceleration measurement ``` #### 2. Pattern Recognition Engine - Double Top/Bottom formations - Triangle patterns (Symmetrical, Ascending, Descending) - Channel patterns - Candlestick patterns (Engulfing, Hammer, Hanging Man) #### 3. Performance Tracking - Overall win rate - Hourly performance - Daily performance - Real-time statistics ### Input Parameters #### Basic Settings - `Range Width ($)`: Target price movement (Default: $50 = ±$25) - `Minimum Confidence (%)`: Required confidence for entry (Default: 75%) - `Max Daily Trades`: Overtrading prevention (Default: 5) #### Filter Settings - `Trend Filter`: EMA alignment validation - `Volume Confirmation`: Volume spike detection - `S/R Filter`: Key level analysis - `Momentum Alignment`: Directional strength confirmation #### Display Settings - `Minimal Mode`: Reduced visual elements for experienced users - `Pattern Display`: Visual pattern overlays - `EMA Lines`: Moving average visualization ### Usage Instructions #### Setup Process 1. Open BTCUSD chart on TradingView 2. **Set timeframe to 30 seconds** (CRITICAL) 3. Add indicator to chart 4. Adjust parameters if needed #### Reading Signals **Decision Panel (Left Side)** - `HIGH`: Predicts +$25 move in 3 minutes - `LOW`: Predicts -$25 move in 3 minutes - `WAIT`: Conditions building, no entry yet - `STAY`: No trade opportunity **F-Score Interpretation** - 65+ points: Direction suggestion (light color) - 80+ points: Strong signal (solid color) - Entry ready: Exclamation mark (!) **Statistics Panel (Right Side)** - Win rate: Percentage of successful predictions - 1H Stats: Last hour performance - Daily Stats: Today's results #### Entry Execution 1. Wait for `HIGH!` or `LOW!` in decision panel 2. Large arrow appears on chart (▲ for HIGH, ▼ for LOW) 3. Enter at **next candle open** 4. Result evaluated after 3 minutes (6 candles) ### Algorithm Logic #### Early Entry System (v7.2 Feature) The indicator uses predictive analysis starting at F-Score 65 instead of waiting for 80: - Faster signal generation - Reduced opportunity loss - Slightly lower win rate trade-off #### Confidence Calculation ``` Base confidence: 50% + Filter score bonus + Pattern recognition bonus + Volatility adjustment - Risk factors = Final confidence (50-95%) ``` ### Technical Specifications #### Multi-Timeframe Analysis - Primary: 30-second chart - Secondary: 1-minute data - Reference: 5-minute trend #### Data Processing - Real-time tick analysis - No repainting (signals are final) - Historical verification system ### Limitations & Known Issues 1. **Spread/Commission Not Included**: Actual profits will be lower 2. **30-Second Noise**: High false signal risk on ultra-short timeframe 3. **Network Latency**: Execution delays not accounted for 4. **Market Conditions**: Performance varies with volatility 5. **Algorithm Trading**: Cannot compete with HFT systems ### Performance Metrics - Target Win Rate: 83% (aspirational) - Evaluation Period: 3 minutes - Risk per trade: Fixed ±$25 - Maximum daily exposure: 5 trades ### Troubleshooting Guide **No signals appearing?** - Check F-Score (needs 65+) - Verify 30-second timeframe - Ensure BTCUSD pair selected **Low win rate?** - Only trade 75%+ confidence signals - Respect daily trade limit - Avoid news events **Pattern shows "-"?** - Normal when no clear pattern exists - Not all market conditions produce patterns ### Code Modification Notes Written in Pine Script v6. Key considerations for modifications: - Global variables use `var` for persistence - Drawing objects require manual management - Bar counting varies by timeframe - Pattern detection runs on confirmed bars only ### Risk Disclosure **IMPORTANT**: Trading cryptocurrencies involves substantial risk of loss and is not suitable for all investors. The high degree of leverage can work against you as well as for you. Before deciding to trade, you should carefully consider your investment objectives, level of experience, and risk appetite. The possibility exists that you could sustain a loss of some or all of your initial investment and therefore you should not invest money that you cannot afford to lose. ### Support & Updates - Report issues in TradingView comments - Check for updates regularly - Version 7.2 is current release - Community feedback welcome ### Legal Notice This indicator is provided for educational and research purposes only. It should not be construed as investment advice. The authors and distributors of this indicator accept no liability for losses incurred through its use. Always consult with a qualified financial advisor before making investment decisions. --- *Version: 7.2* *License: Mozilla Public License 2.0* *Author: * *Last Updated: 2024* **FINAL WARNING: This indicator cannot predict the future. Use at your own risk. Start with demo trading. Never trade with money you cannot afford to lose.**
Pine Script® インジケーター
Hunk77の投稿
1
Premarket Breakout Painter (08:00-09:29 ET) — First Break Only**Pre-Market Breakout Indicator** This indicator is designed to help traders identify and trade **pre-market breakout levels**. It automatically marks the pre-market high and low range, then extends those levels into the regular session so you can see when price breaks above or below them. --- ## 🔑 **How It Works** 1. **Pre-Market Range** * During extended hours (before the 09:30 ET open), the indicator tracks the **highest high** and **lowest low**. * These levels form the **pre-market range**. 2. **Breakout Levels** * At the market open, the pre-market high and low are plotted as horizontal lines. * When price breaks above the pre-market high → potential **bullish breakout**. * When price breaks below the pre-market low → potential **bearish breakout**. 3. **Optional Midline / VWAP** --- 🎨 **Visuals** * **Horizontal lines** marking pre-market high and low. * Lines extend into the regular session for easy tracking. * Colors can be customized for bullish/bearish clarity. --- ⚙️ **Inputs** * **Session Times** (default: 04:00–09:30 ET for U.S. equities). * **Show/Hide Midline** (optional). * **Line Styles & Colors**. * **Alerts** (optional, e.g., alert when price crosses pre-market high or low). --- 🚨 **Practical Use** * Look for **high volume breakouts** through pre-market high/low after the bell. * Use levels as **support/resistance** for pullback entries. * Combine with EMA trend filters, VWAP, or market internals for confirmation. --- ✅ This indicator doesn’t give buy/sell signals on its own — it’s a **visual framework** to highlight where the market may make its first decisive move of the day.
Pine Script® インジケーター
howie42galeの投稿
Overlay Candles (Multi-TF, right side projection)This script overlays candles from a custom selectable timeframe (5m to 1M) on the right side of the chart as projections. It helps visualize and compare the ongoing price action with the last higher-timeframe candles without switching chart intervals. Features: Choose timeframe for overlay candles (5m, 15m, 1H, 4H, 1D, 1W, 1M). Adjustable number of candles to display (1–8). Fixed candle width (in bars) and configurable gap between candles. Custom colors for bullish and bearish candles. Adjustable wick and border thickness (px). Candle borders drawn with four lines to ensure visibility at all zoom levels. Use cases: Multi-timeframe price action analysis. Visualizing higher-timeframe structure alongside lower-timeframe trading. Educational / visual aid for understanding candlestick context.
Pine Script® インジケーター
toratoratorの投稿
Swing Highs/Lows & Candle Patterns[LuxAlgo] [Filtered]Swing Highs/Lows & Candle Patterns - Tweaked Version This indicator is a customized and enhanced version of LuxAlgo’s original Swing Highs/Lows & Candle Patterns indicator. It identifies and labels critical swing high and swing low points to help visualize market structure, alongside detecting key reversal candlestick patterns such as Hammer, Inverted Hammer, Bullish Engulfing, Hanging Man, Shooting Star, and Bearish Engulfing. With added options to selectively display only Lower Highs (LH) and Higher Lows (HL), this tweaked version offers greater flexibility for traders focusing on specific market dynamics. Users can also customize the lookback length and label styling to fit their preferences. Credit to LuxAlgo for the original concept and foundation of this powerful tool, which this script builds upon to support more tailored technical analysis. Ideal for swing traders and technical analysts seeking improved entry and exit signals through a combination of price swings and candlestick pattern recognition.
Pine Script® インジケーター
ryanjoyの投稿