始めましょう

Candlestick analysis

Aroon with RSI Confirmation (92.86%)This script is an analytical tool designed to identify moments in market behavior when price momentum is shifting. It does this by combining two concepts: **Aroon Levels** (to measure trend maturity) and **RSI Slope Behavior** (to measure short-term momentum pressure). **Functional Concept (Professional Description)** The indicator examines when either the *Aroon Up* or *Aroon Down* value reaches approximately **92.86%**, which statistically represents a phase where price has recently made an extreme high or low relative to the selected period. This level suggests the trend is nearing a point of *decision*—either continuation or exhaustion. At the same time, the script analyzes the **relationship between the RSI and its smoothed average**. The difference between the two reflects whether momentum is accelerating in the current direction or slowing. A small difference indicates **market stability**, while whether RSI is positioned above or below the smoothed line indicates **who has control**—buyers or sellers. By requiring both conditions to align, the script filters out random noise and highlights moments where **trend structure and momentum sentiment converge**. * **Buy Signal:** Occurs when the market has recently formed a significant low (Aroon Down ≈ 92.86) and buyers begin to regain control (RSI crosses above its smoothed value with low volatility). * **Sell Signal:** Occurs when the market has recently reached a significant high (Aroon Up ≈ 92.86) and sellers begin to dominate (RSI slips below its smoothed value with low volatility). --- **Psychological Interpretation** Markets are driven by cycles of **attention**, **emotion**, and **participation**. This script targets moments when: 1. **Price has made a meaningful extreme** (a recent new high or low). This is where crowd sentiment is often strongest—either euphoria near highs or pessimism near lows. 2. **Traders are reassessing direction**, shown by momentum flattening (small RSI difference). This reveals that participants are hesitating, watching, and waiting. The market is effectively *thinking*. 3. **Control shifts subtly**, when RSI moves relative to its smoothed trend. This indicates that early, informed participation is beginning to form—before the broader crowd reacts. In psychological terms, the script highlights the **transitional turning points** where: * Fear begins to weaken and confidence returns (buy setup), or * Confidence begins to crumble and caution emerges (sell setup). These are the earliest moments when market sentiment **changes hands**, often preceding visible trend reversals. The indicator is not reacting to outcomes—it is observing the underlying shift in **decision-making pressure** among market participants. --- In essence, this tool identifies **behavioral inflection points**—where the market transitions from one emotional state to the next—providing traders with signals grounded in both structural trend positioning and real-time crowd momentum behavior.
Pine Script® インジケーター
jaydipali622018の投稿
3
Vivek Script to detect 9 EMA bouncesThe 9-period Exponential Moving Average (9 EMA) is a classic tool for identifying short-term momentum in the market. Traders who use this understand that true trend continuation often involves a pullback, not just a continuous surge. Our Goal: We are not just looking for a trend; we are looking for a specific, high-probability entry point: the 9 EMA Retest. Our script's purpose is to automatically and objectively verify every time this pattern occurs in the historical data.
Pine Script® インジケーター
viveksubbaiyah32の投稿
Session SFPThis script is a powerful, multi-timeframe tool designed to identify high-probability Swing Failure Patterns (SFPs) at key historical levels. Instead of looking for traditional "pivots" (like a 3-bar swing), this indicator finds the actual high and low of a previous higher-timeframe (HTF) bar (e.g., the previous weekly high/low) and waits for a lower-timeframe (LTF) candle to sweep that level and fail. This allows you to spot liquidity sweeps and potential reversals at significant, structural price points. How It Works The indicator's logic is based on a simple, two-timeframe process: Level Detection: First, it finds the high and low of the previous bar on your chosen "Level Timeframe" (e.g., W for Weekly, D for Daily). It plots these as small 'x' markers on your chart. SFP Identification: Second, it watches price action on a lower "SFP Timeframe" (e.g., 240 for 4H). A potential SFP is identified when a candle's wick sweeps above a key high or below a key low. Confirmation: The SFP is only confirmed after the SFP candle closes back below the high (for a bearish SFP) or above the low (for a bullish SFP). It then waits for a set number of "Confirmation Bars" to pass. If price does not close back over the level during this window, the signal is locked in, and a label is printed. How to Use (Key Settings) Level Timeframe (Most Important): This is the timeframe for the levels you want to trade. Set this to W to find SFPs of the previous weekly high/low. Set it to D to find SFPs of the previous daily high/low. SFP Timeframe: This is the timeframe you want to use to find the SFP candle itself. This should be lower than your Level Timeframe (e.g., 240 or 60). Level Lookback: This controls how many old levels the script will track. A value of 10 on a W Level Timeframe will track the highs and lows of the last 10 weeks. Confirmation Bars: This is your "patience" filter. It's the number of SFP Timeframe bars that must close without reclaiming the level after the SFP. A value of 0 will confirm the SFP immediately on the candle's close. Enable Wick % Filter: A quality filter. If checked, this ensures the SFP candle's rejection wick is a significant percentage of the candle's total range. Chart Visuals 'x' Markers: These are the historical highs and lows from your "Level Timeframe". You can turn these on or off in the settings. SFP Label: When an SFP is fully confirmed, a label (Bearish SFP or Bullish SFP) will appear, detailing the level that was swept and the timeframes used. SFP Line: A solid horizontal line is drawn from the 'x' marker to the SFP candle to highlight the sweep. Colored Boxes (Optional): If you are viewing a chart timeframe lower than your "SFP Timeframe", you can enable background boxes to highlight the exact SFP candle and its confirmation bars.
Pine Script® インジケーター
nickbonenkampの投稿
26 EMA Reversal LogicThis indicator identifies two distinct price behaviours on the daily charts of SPY, SPX, QQQ, or IXIC, using the 26-period EMA as a reference. It plots one signal per downtrend — either a yellow circle (bearish continuation) or a green circle (bullish reversal) — and locks further signals until price closes above the 26 EMA. The yellow circles are when we close below the 26-day EMA and the next day we make a lower low. The green circles are when we close below the 26-day EMA and the next day we actually open higher and that low is never revisited. Symbol Restriction Only works on: SPY, SPX, QQQ, IXIC On any other symbol, the script will display an error and stop. Timeframe Restriction DAILY chart only — will show an error on any other timeframe. Core Logic: Two-Candle Pattern Detection Both signals start with the same Day 1 condition: Day 1: The candle closes below the 26 EMA From there, Day 2 determines the signal: Yellow Circle (Bearish Continuation) Plotted BELOW the Day 2 candle Conditions: Day 1 closed below the 26 EMA Day 2 makes a lower low than Day 1’s low → low < low Interpretation: Price is weakening — pushing to new lows below the EMA. Confirms downward momentum. Green Circle (Bullish Reversal / Failed Breakdown) Plotted ABOVE the Day 2 candle Conditions: Day 1 closed below the 26 EMA Day 2 opens higher than Day 1’s close → open > close Day 2’s low never revisits Day 1’s low → low >= low Interpretation: Buyers defend the prior low with a higher open — classic false breakdown. Suggests a potential reversal higher. One Signal Per Downtrend (Lock & Reset) After either a yellow or green circle is plotted, no more circles appear Prevents clutter — focuses on first meaningful reaction Reset Rule: Lock is released only when price closes above the 26 EMA Best Used On Daily timeframe SPY, SPX, QQQ, IXIC only With trend, volume, or broader market context
Pine Script® インジケーター
Kirk_Mの投稿
BaH4iK_StaategyThis indicator is a flexible strategy builder for TradingView, allowing traders to combine and customize popular entry/exit signals, filters, and overlays into a single tool. The indicator supports a wide range of technical methods and provides modular configuration for advanced strategy design. How it works: The user can select from dozens of entry types (trend, breakout, oscillator signals), confirmation filters (EMA, SMA, MA crosses, volatility, custom range filters), overlays, dashboards, and risk settings. Key logic includes conditional sampling for EMAs and SMAs, multiple range and trend-detection systems (Range Filter, Supertrend, Half Trend, Rational Quadratic Kernel), and integration of classic confirmation indicators (TSI, VWAP, RSI, MACD, CCI, Ichimoku, Donchian, Bollinger Bands, etc.). Signal expiry features, alternate signals, and dashboard visualization are built-in. Filters can be stacked/combined or toggled via the settings panel. Features: Entry/exit signals: LONG/SHORT labels, arrows, dashboard summary Signal confirmation: EMA/SMA/MA crosses, trend, range, oscillator filters Custom overlays: supply/demand zones, pivot levels, ranges, fractals, volume bands Modular configuration: choose methods, combine signals, tune sensitivity and cooldown Advanced filters: trend alignment, volatility breakout, multiple timeframe signals Risk management: automate signal expiry, stop-loss, TP projections, risk/reward display Dashboard panel: flexible position, size, session overlays, instant summary of conditions UI: All interactive controls and outputs (labels, tooltips, dashboard text) default to English; if other language is used in UI, translation is provided in this description. How to use: Add the indicator to your chart, then use the settings panel to select entry type, confirmation logic, overlays, and dash display. Combine filters to custom-build rules. Use labels/arrows and dashboard to monitor entries and manage risk. Designed for manual, semi-automatic and automated strategy development. Originality: This tool is not just a mashup of popular methods but provides a true framework for custom strategy creation directly on TradingView, with unique stacking, dynamic dashboard, and advanced filter/expiry management.
Pine Script® インジケーター
BaH4iK_BingX-BizDevの投稿
Trend & Strength Detector TSDTrend Strength Detector (TSD) *Objective Trend Quality Measurement for Educational Market Analysis* Note: This mathematical framework is a proprietary quantitative model developed by Ario Pinelab, inspired by classical EMA, ADX, RSI and MACD principles, yet not documented in any public technical or academic publication. ## 🎯 Purpose & Design Philosophy The ** Trend Strength Detector- TSD ** is an educational research tool that provides **quantitative measurement of trend quality** through two independent scoring systems (0-100 scale). It answers the analytical question: *"How strong and aligned is the current market trend environment?"* This indicator is designed with a **modular, complementary approach** to work alongside various analysis methodologies, particularly pattern-based recognition systems. ## 🔗 Complementary Research Framework ### Designed to Work With Pattern Detection Systems This indicator provides **environmental context measurement** that complements qualitative pattern recognition tools. It works particularly well alongside systems like: - **RMBS Smart Detector - Multi-Factor Momentum System** - Traditional chart pattern analyzers - Any momentum-based pattern identification tools 🔍 **To find RMBS Smart Detector:** - Search in TradingView Indicators Library: `" RMBS Smart Detector - Multi-Factor Momentum System"` - Look for: *Multi-Factor Momentum System* - By author: ` ` ### Why This Complementary Approach? **Trend Quality Measurement** (TSD - this tool) provides: - ✅ Structural trend alignment (0-100 score) - ✅ Momentum intensity levels (0-100 score) - ✅ Environment classification (Strong/Moderate/Weak) - 📌 **Answers:** *"HOW STRONG is the underlying trend environment?"* ### Educational Research Value When used together in a research context, these tools enable systematic study of questions like: - How do reversal patterns behave when Strength Score is above 70 vs below 30? - Do continuation patterns in weakening environments (declining scores) show different characteristics? - What is the correlation between high Alignment Scores and pattern "success rates"? - Can environment classification help identify genuine trend initiation vs false starts? ⚠️ **Important Note:** Both tools are **independent and work standalone**. TSD provides value whether used alone or with other analysis methods. The relationship with RMBS (or any pattern tool) is **complementary for research purposes**, not dependent. --- ###Mathematical Foundation ##TSA Formula: scoring method developed by Ario -Trend Model (0 – 100) TAS = EMA Alignment (0–40) + Price Position (0–30) + Trend Consistency (0–30) EMA Alignment checks EMA_fast vs EMA_slow vs EMA_trend structure. Price Position evaluates if Close is above/below all EMAs. Consistency = 3 × max(bullish,bearish bars within 10 candles). -Strength Model (0 – 100) Strength = ADX (0–50) + EMA Slope (0–25) + RSI (0–15) + MACD (0–10) ADX measures trend energy; Slope shows EMA momentum %; RSI assesses zone positioning; MACD confirms directional agreement. Note: This formula represents a proprietary quantitative model by Ario_Pinelab, inspired by classical technical concepts but not published in any external reference.________________________________________ 📊 Environment Classification Based on Total Strength Score: 🟢 Strong Environment: Score ≥ 60 → Well-defined momentum, clear directional bias 🟡 Moderate Environment: 40 ≤ Score < 60 → Mixed signals, transitional conditions 🔴 Weak Environment: Score < 40 → Ranging, choppy, low conviction movement Color Coding: • Green background: Strong (≥60) • Yellow background: Moderate (40-59) • Red background: Weak (<40) ________________________________________ 📈 Visual Components Main Chart Display Score Labels (Top-Right Corner): ┌─────────────────────────────────┐ │ 📊 Alignment: 75 | Strength: 82 │ │ Environment: Strong 🟢 │ └─────────────────────────────────┘ Color-Coded Background: • Environment strength visually indicated via background color • Helps quick identification of market regime • Customizable transparency (default: 90%) Reference Lines: • Dotted line at 60: Strong/Moderate threshold • Dotted line at 40: Moderate/Weak threshold • Mid-line at 50: Neutral reference ________________________________________ 🔧 Customization Settings Input Parameters The best setting is the default mode. 🚫 Important Disclaimers & Limitations What This Indicator IS: ✅ Educational measurement tool for trend quality research ✅ Quantitative assessment of current market environment ✅ Complementary analysis tool for pattern-based systems ✅ Historical data analyzer for systematic study ✅ Multi-factor scoring system based on technical calculations What This Indicator IS NOT: ❌ NOT a trading system or signal generator ❌ NOT financial advice or trade recommendations ❌ NOT predictive of future price movements ❌ NOT a guarantee of pattern success/failure ❌ NOT a substitute for comprehensive risk management ________________________________________ Known Limitations 1. Lagging Nature: ⚠️ All components (EMA, ADX, RSI, MACD) are calculated from historical price data → Scores reflect CURRENT and RECENT conditions → Cannot predict sudden reversals or black swan events → Trend measurements lag actual price turning points 2. Whipsaw Risk: ⚠️ In choppy/ranging markets, scores may fluctuate rapidly → Moderate zone (40-60) can see frequent transitions → Low timeframes more susceptible to noise → Consider higher timeframes for stable measurements 3. Component Conflicts: ⚠️ Individual components may disagree → Example: Strong ADX but weak RSI alignment → Scores average these conflicts (may hide nuance) → Check individual components for deeper insight 4. Not Predictive: ⚠️ High scores do NOT guarantee continuation ⚠️ Low scores do NOT guarantee reversal → Measurement ≠ Prediction → Use for CONTEXT, not SIGNALS → Combine with comprehensive analysis ________________________________________ Risk Acknowledgments Market Risk: • All trading involves substantial risk of loss • Past performance (even systematic studies) does not guarantee future results • No indicator, system, or methodology can eliminate market risk Measurement Limitations: • Scores are mathematical calculations, not market predictions • Environmental classification is descriptive, not prescriptive • Strong measurements can deteriorate rapidly without warning Educational Purpose: • This tool is designed for LEARNING about market structure • Not designed, tested, or validated as a standalone trading system • Any trading decisions are user’s sole responsibility No Warranty: • Indicator provided “as-is” for educational purposes • No guarantee of accuracy, reliability, or profitability • Users must verify calculations and apply critical thinking Open Source Full Pine Script code available for educational study and modification. Feedback and improvement suggestions welcome. “All logic is presented for research and educational visualization.” ---
Pine Script® インジケーター
Ario_pinelabの投稿
Atif's Liquidity Toolkit💎 GENERAL OVERVIEW: Atif’s Liquidity Toolkit is a price-action-based indicator used to identify Buyside & Sellside Liquidity Levels, Liquidity Sweeps, FVG Sweeps, and Buy/Sell signals, following specific rules from Atif Hussain. This indicator was developed by Flux Charts in collaboration with Atif Hussain. 🔹Purpose of this indicator: The purpose of Atif’s Liquidity Toolkit is to help traders understand where liquidity is forming, when it’s being taken, and how momentum shifts immediately afterward. It automates the entire process of identifying buyside & sellside liquidity, detecting liquidity sweeps, and confirming whether displacement followed through a Fair Value Gap. The goal is to give traders a consistent, rule-based framework to interpret market structure. 🎯ATIF’S LIQUIDITY TOOLKIT FEATURES: Atif’s Liquidity Toolkit indicator includes 6 main features: Fair Value Gaps Multi-Timeframe Liquidity Levels Liquidity Sweeps Fair Value Gap Sweeps Buy & Sell Signals with Take-Profit & Stop-Loss Levels Alerts 1️⃣Fair Value Gaps 🔹What is a Fair Value Gap?: A Fair Value Gap (FVG) is an area where the market’s perception of fair value suddenly changes. On your chart, it appears as a three-candle pattern: a large candle in the middle, with smaller candles on each side that don’t fully overlap it. A bullish FVG forms when a bullish candle is between two smaller bullish/bearish candles, where the first and third candles’ wicks don’t overlap each other at all. A bearish FVG forms when a bearish candle is between two smaller bullish/bearish candles, where the first and third candles’ wicks don’t overlap each other at all. Bullish & Bearish FVGs: In the settings, you can toggle on/off FVGs, choose the invalidation method, adjust the sensitivity, and toggle on FVG Midline & Labels. 🔹Invalidation Method: The Invalidation Method setting allows traders to choose how an FVG is invalidated. You can choose between Close and Wick. Close: A candle must close below a bullish FVG or above a bearish FVG to invalidate it. Wick: A candle’s wick must go below a bullish FVG or above a bearish FVG to invalidate it. 🔹Sensitivity: The sensitivity setting determines the minimum gap size required for an FVG detection. A higher sensitivity will filter out smaller gaps, while a lower sensitivity will detect more frequent, smaller gaps. Setting the sensitivity to 0 will display all gaps, regardless of their size. On the left, the sensitivity is 5. On the right, the sensitivity is 0. 🔹Midline: When enabled, a dashed line is drawn at the center of the FVG. 🔹Labels: When enabled, a text label will be plotted with the gap, clearly identifying the zone as a FVG. 2️⃣ Multi-Timeframe Liquidity Levels The indicator automatically detects and plots Buyside Liquidity (BSL) & Sellside Liquidity (SSL) Levels across up to three timeframes simultaneously. 🔹What is Buyside Liquidity? Buyside Liquidity (BSL) represents price levels where many buy stop orders are sitting, usually from traders holding short positions. When price moves into these areas, those stop-loss orders get triggered and short sellers are forced to buy back their positions. These zones often form above key highs such as the previous day, week, or month. Understanding BSL is important because when price reaches these levels, the sudden wave of buy orders can create sharp reactions or reversals as liquidity is taken from the market. 🔹What is Sellside Liquidity? Sellside Liquidity (SSL) represents price levels where many sell stop orders are waiting, usually from traders holding long positions. When price drops into these areas, those stop-loss orders are triggered and long traders are forced to sell their positions. These zones often form below key lows such as the previous day, week, or month. Understanding SSL is important because when price reaches these levels, the surge of sell orders can cause sharp reactions or reversals as liquidity is taken from the market. Atif’s Liquidity Toolkit indicator automatically plots Buyside & Sellside Liquidity levels using the following levels: Previous Day High (PDH) & Previous Day Low (PDL) Previous Week High (PWH) & Previous Week Low (PWL) Previous Month High (PMH) & Previous Month Low (PML) Asia Session Highs/Lows London Session Highs/Lows New York Session Highs/Lows The session start and end times are not customizable. The following times in EST are used for each session: Asia Session: 20:00-00:00 London Session: 02:00-05:00 New York Sessions: NY AM: 09:30-11:00 NY Lunch: 12:00-13:00 NY PM: 14:00-16:00 Users can also plot swing highs/lows using a lookback period and choosing the higher timeframe. Users can choose two custom higher timeframes and also enable swing highs/lows from the current chart’s timeframe. There are three settings to customize for the current chart’s timeframe and higher timeframes: Current TF - when toggled on, swing highs/lows will be plotted from the chart’s timeframe using the pivot length input HTF 1 - when toggled on, swing highs/lows will be plotted from the user-inputted timeframe using the pivot length input HTF 2 - when toggled on, swing highs/lows will be plotted from the user-inputted timeframe using the pivot length input The Pivot Length controls how far back the indicator checks to confirm whether a candle’s high or low is a true swing point (also called a “pivot”). When detecting a swing high, the indicator checks if that candle’s high is higher than the highs of the previous X candles and the next X candles. For a swing low, it checks if the candle’s low is lower than the lows of the previous X candles and the next X candles. The number X comes from your Pivot Length setting. A lower Pivot Length input (for example, 3 or 4) means the indicator only looks at a few candles on each side, so it will detect more swing points, including smaller, less significant ones. A higher Pivot Length input (for example, 20 or 25) makes the indicator look at more candles on each side, so it only marks major turning points that stand out clearly on the chart. In short: Low Pivot Length = more frequent, smaller levels (short-term focus) High Pivot Length = fewer, stronger levels (major swing focus) The Pivot Length input for each setting (Current TF, HTF 1, and HTF 2) are displayed below in the red boxes: Each liquidity level is plotted with a text label, making it easy to identify where a level came from. You can turn off the ‘Show Levels’ setting if you don’t want to see the levels on your chart. Please note: Liquidity Levels play a key role in finding liquidity sweeps, FVG Sweeps, and Buy/Sell signals. Keeping the levels turned off will not stop the indicator from using the levels that are enabled from being used for the other features mentioned. 3️⃣Liquidity Sweeps: The indicator automatically detects bullish and bearish liquidity sweeps using the liquidity levels you have enabled. 🔹What is a Liquidity Sweep? A liquidity sweep is a market phenomenon where significant players, such as institutional traders, deliberately drive prices through key levels to trigger clusters of pending buy or sell orders. It’s how the market gathers the liquidity needed for larger participants to enter positions. Traders often place stop-loss orders around obvious highs and lows, such as the previous day’s, week’s, or month’s levels. When price pushes through one of these areas, it triggers the stops placed there and generates a burst of volume. This often creates a short-term fake-out before the market reverses in the opposite direction. By detecting these sweeps in real time, traders can identify potential reversal areas or “trap” areas where liquidity has been taken. 🔹Bullish Liquidity Sweep These occur when price dips below a Sellside Liquidity (SSL) level, taking out the stop-loss orders placed by long traders below that low. The indicator marks a zone around the candle that swept the SSL to highlight where liquidity was removed from the market. When this happens, it shows that the market just cleared out sell-side liquidity, meaning traders who were long had their stops hit. This is often followed by a reversal or strong reaction upward, because the market no longer has pending liquidity to fill below that level. 🔹Bearish Liquidity Sweep These occur when price dips above a Buyside Liquidity (BSL) level, taking out the stop-loss orders placed by short seller traders above that high. The indicator marks a zone around the candle that swept the BSL to highlight where liquidity was removed from the market. When this happens, it shows that the market just cleared out buyside liquidity, meaning short traders had their stops hit. This is often followed by a reversal or strong reaction downward, because the market no longer has pending liquidity to fill above that level. Under the ‘Liquidity Sweeps’ section in the settings, you can toggle on/off Bullish Regular Sweeps and Bearish Regular Sweeps. You can also customize the line style and color of liquidity levels that have been swept. 🔹How to Use Liquidity Sweeps Liquidity sweeps are not direct trade signals. They are best used as context when forming a directional bias. A sweep shows that the market has removed liquidity from one side, which can hint at where the next move may develop. For example: When Buyside Liquidity (BSL) is swept, it often signals that buy stops have been triggered and the market may be preparing to move lower. Traders may then begin looking for short opportunities. When Sellside Liquidity (SSL) is swept, it often signals that sell stops have been triggered and the market may be preparing to move higher. Traders may then begin looking for long opportunities. It’s common practice to use liquidity sweeps as the first step in building a trade idea. Many traders will wait for additional confirmation, such as a fair value gap forming after the sweep, before opening a position. Under the ‘Liquidity Sweeps’ section in the settings, you can toggle on/off: Bullish Regular Sweeps - when disabled, Bullish Regular Sweeps won’t appear on your chart. Bearish Regular Sweeps - when disabled, Bearish Regular Sweeps won’t appear on your chart. 4️⃣Fair Value Gap Sweeps: The indicator automatically detects bullish and bearish Fair Value Gap sweeps (FVG Sweep) using the liquidity levels you have enabled. 🔹What is a FVG Sweep? A FVG Sweep is a specific type of liquidity sweep that not only clears liquidity above or below a key level, but also forms a Fair Value Gap (FVG) immediately afterward. The liquidity sweep shows where stop orders were triggered, areas where the market aggressively took out one side’s liquidity. The formation of a Fair Value Gap right after the sweep confirms that displacement followed. This means that the sweep was not just a stop hunt, but a deliberate move backed by momentum. In simple terms, a regular liquidity sweep only tells you that liquidity was taken. A FVG Sweep tells you that liquidity was taken and a strong directional move started immediately after, leaving an imbalance in price. That imbalance represents where aggressive buyers or sellers entered the market without enough opposite-side orders to keep price balanced. This combination adds a confirmation and intent behind regular liquidity sweeps. 🔹Bullish FVG Sweep The indicator automatically detects bullish FVG Sweeps when price takes out a Sellside Liquidity (SSL) level and then forms a bullish FVG within the next few candles. This sequence shows that sellers were stopped out and buyers immediately entered the market with momentum. 🔹Bearish FVG Sweep The indicator automatically detects bearish FVG Sweeps when price takes out a Buyside Liquidity (BSL) level and then forms a bearish FVG shortly after. This shows that short sellers’ stops were triggered, and new selling pressure entered the market right away. 🔹How to Use FVG Sweeps Unlike regular liquidity sweeps, FVG Sweeps can be used as trade entries because they confirm both liquidity being cleared and immediate momentum. A regular sweep only shows that stop-losses were triggered, but an FVG Sweep proves that price not only cleared liquidity but also moved away with momentum, leaving behind an imbalance (Fair Value Gap). This shift often marks the start of a new short-term trend. We’ll cover this in more detail in the Buy and Sell Signal section below, but in short, a bullish FVG Sweep can act as confirmation for a potential long entry after price takes out a low, while a bearish FVG Sweep can confirm a short entry after price takes out a high. The strongest FVG Sweeps come from extremely sharp reversals. On the chart, they look like a “V” shape for bullish setups or an inverted “V” shape for bearish setups. This shape shows how quickly momentum shifted after liquidity was cleared. When price instantly reverses and leaves a Fair Value Gap behind, it’s a clear sign that buyers or sellers stepped in aggressively and absorbed all available liquidity on the opposite side. In practice, traders often use FVG Sweeps as a trigger to align their bias. For example, after a bullish FVG Sweep, the focus shifts toward looking for long setups within the new imbalance or during a small retracement into the Fair Value Gap. After a bearish FVG Sweep, traders focus on short setups as price retraces back into the gap before continuing lower. The key takeaway is that FVG Sweeps show conviction. Under the ‘Liquidity Sweeps’ section in the settings, you can toggle on/off: Bullish FVG Sweeps - when disabled, Bullish FVG Sweeps won’t appear on your chart. Bearish FVG Sweeps - when disabled, Bearish FVG Sweeps won’t appear on your chart. Please Note: the settings you choose to use for Fair Value Gaps, under the ‘Fair Value Gaps’ section, will be used for FVG Sweeps. This is important because if you increase the sensitivity value for FVGs, not all FVG Sweeps will appear if the FVG’s size doesn’t meet the sensitivity threshold. 5️⃣Buy & Sell Signals: This indicator also plots Buy & Sell signals. These signals follow logic based on Atif Hussain’s FVG trading model. The entry requirements for a Long & Short signal are outlined below. 🔹Buy Signal: In order for a Buy Signal to generate, the following conditions must occur in order: Bullish FVG Sweep Price Retraces to the Bullish FVG 🔹Sell Signal: In order for a Buy Signal to generate, the following conditions must occur in order: Bearish FVG Sweep Price Retraces to the FVG 🔹Require Retracement: Under the ‘Signals’ section in the settings, you can toggle on/off the ‘Require Retracement’ setting. When disabled, a long/short signal will appear immediately after a Bullish or Bearish FVG Sweep, instead of waiting for price to retrace back to the gap. Please Note: the liquidity levels you enable under the ‘Liquidity Levels’ section will be the levels used for signals. Thus, if you only have the Previous Day Highs/Lows enabled, then only those levels will be used to generate buy/sell signals. Also, long Signals will only appear if Bullish FVG Sweeps are enabled, and Short Signals will only appear if Bearish FVG Sweeps are enabled. When a Buy Signal or Sell Signal is plotted, three suggested take-profit levels and one suggested stop-loss level are plotted. There are two different Take-Profit methods you can choose from within the indicator settings: Manual or Auto. 🔹Manual Take-Profit: If you’re using manual take-profit levels, you can customize the Risk-to-Reward (RR) for Take-Profit 1, 2, and 3 by adjusting the “RR 1”, “RR 2”, and “RR 3” settings. Setting RR 1 to 1 means take-profit 1 is a 1:1 risk-to-reward ratio. The stop-loss will always be placed at the recent low for Buy Signals, and at the recent high for Sell Signals. 🔹Auto Take-Profit: If you select to use Auto Take-Profit instead of Manual, then Take-Profit 1, 2, and 3 will be automatically determined based on nearby liquidity levels. The stop-loss will be placed at the recent low for Buy Signals, and at the recent high for Sell Signals. Take-Profit Levels 1, 2, and 3 will be placed at the three closest opposite liquidity levels. If the take-profit 2 and take-profit 3 levels are too far away, only one take-profit level will be displayed. 🔹Signal Settings: Long Signals: When enabled, long signals are shown. When disabled, long signals will not appear. Short Signals: When enabled, short signals are shown. When disabled, short signals will not appear. Require Retracement: When enabled, price must retrace to a FVG after a FVG Sweep in order for a signal to be generated. Take-Profit Levels: When enabled, take-profit levels (TP 1, TP 2, and TP 3) are shown with long/short signals. When disabled, take-profit levels and their price labels are not displayed. Take-Profit Labels: When enabled, take-profit labels are displayed when price reaches one of the three take-profit levels. When disabled, labels won’t appear when price reaches take-profit levels. Stop-Loss Levels: When enabled, stop-loss levels are shown for long/short signals. When disabled, the stop-loss level and its price label are not displayed. Stop-Loss Labels: When enabled, stop-loss levels are shown for long/short signals. When disabled, a label won’t appear when price reaches the stop-loss level. 6️⃣Alerts: The indicator supports alerts, so you never miss a key market move. You can choose to receive alerts for each of the following conditions: Bearish Liquidity Sweep Bullish Liquidity Sweep Bearish FVG Sweep Bullish FVG Sweep Long Signal Short Signal TP 1 TP 2 TP 3 Stop-Loss ‼️Important Notes: TradingView has limitations when running features on multiple timeframes, such as the liquidity levels, which can result in the following error: 🔹Computation Error: The computation of using MTF features are very intensive on TradingView. This can sometimes cause calculation timeouts. When this occurs, simply force the recalculation by modifying one indicator’s settings or by removing the indicator and adding it to your chart again. 🚩 UNIQUENESS: This indicator is unique because it identifies a specific type of liquidity event referred to as FVG Sweeps, where price takes liquidity and then immediately forms a Fair Value Gap in the opposite direction. These FVG Sweeps serve as the foundation of the model, and the script uses them as the required condition for generating Buy and Sell signals. Once an FVG Sweep is confirmed, the indicator automatically produces a fully defined trade idea with a stop-loss and up to three take-profit targets, following a consistent rule-based execution approach.
Pine Script® インジケーター
fluxchartの投稿
6
GTI Buy/SellGTI Buy/Sell – Precision Reversal & Trend Confirmation Tool The GTI Buy/Sell is an indicator designed to identify potential trend reversals and confirm ongoing trends with precision. What It Does This indicator generates Buy and Sell signals based on dynamic positioning relative to price action. A Buy signal is printed when the GTI line closes below the candle’s close, indicating a potential transition from a bearish to bullish phase. A Sell signal occurs when the GTI line appears above the candle’s close, suggesting a possible bearish reversal. The GTI Buy/Sell doesn’t repaint and provides clear, actionable signals based on live market conditions. How It Works GTI Buy/Sell combines Average True Range (ATR) for volatility filtering, Smoothed Moving Averages (RMA), Simple Moving Average (SMA), and Exponential Moving Average (EMA) to generate a responsive trend-following structure. Rather than using static crossovers, the script evaluates price interaction with multiple weighted moving averages and ATR thresholds to identify exhaustion points and turning moments. These calculated confluences enhance signal quality and reduce false positives. Strategy & Usage Tips Combine with a 38-period SMA: When the GTI prints a Buy signal and price is above the 38 SMA, it reinforces bullish continuation or reversal. Similarly, a Sell signal with price under the 38 SMA supports a bearish outlook. Use with VWAP for Validation: In high-liquidity assets such as indices, pairing GTI with VWAP helps identify institutional support/resistance zones to validate the signal strength. Confluence with GTI Trend: For best results, use this indicator alongside our GTI Trend, which analyzes broader trend context across timeframes. This combination allows traders to align micro signals with macro market direction. Recommended Assets GTI Buy/Sell performs best on assets with significant intraday volatility such as: NASDAQ US30 / Dow Jones S&P 500 Gold (XAUUSD) Brazilian Mini Index (WIN) However, it can be applied to any instrument where meaningful trend behavior and price movement are present.
Pine Script® インジケーター
rafaelgtiの投稿