始めましょう

サイクル

W%R Cycle Swings - MTF Trend📄 English Description Overview The W%R Cycle Swings – MTF Trend indicator is a market-structure tool built on top of Williams %R cycle logic. It detects meaningful swing highs and lows from W%R behavior, then uses those swings to locate the first Market Structure Shift (MSS-first) and track multi-timeframe trend bias + cancel levels. This is not a random mashup of indicators: all components are derived from one core concept—W%R cycles—and are combined into a single, coherent framework for reading structure and trend across timeframes. Core Concepts 1. Williams %R Cycle Swings (Current Timeframe) Instead of using price swings based only on highs/lows, this script uses Williams %R behavior to define swing points: Swing High pattern: OS → OB → OS Swing Low pattern: OB → OS → OB The script: Tracks overbought/oversold states using user-defined levels. Builds a zone for each potential swing (accumulating the extremums during the OB/OS phase). Confirms a swing only when the opposite state appears again. Plots labels on the chart: Swing High label above price Swing Low label below price Optional price display on the label (toggle in settings). This makes the swing points cycle-based rather than purely bar-based. 2. MSS-first (Market Structure Shift on Current TF) Once swings are defined, the script looks for the first break of the most recent swing: Bullish MSS-first: price breaks above the last confirmed swing high. Bearish MSS-first: price breaks below the last confirmed swing low. You can choose whether to confirm by close or by wick (mssByClose input). When an MSS-first is detected: A colored label (bullish/bearish) is drawn at the relevant swing level. A horizontal line is drawn from the swing bar to the MSS bar to visually connect the structure break. Internal trendBias is updated to Up or Down, preventing duplicate MSS labels in the same direction. This gives a clear, visual definition of when the structure actually shifted based on W%R-driven swings. 3. MTF MSS-first Trend & Cancel Logic The same MSS-first concept is applied inside a function and called via request.security() on multiple timeframes (5m, 15m, 30m, 1h, 4h). For each timeframe, the function: Recalculates W%R swings with the same parameters. Detects MSS-first events (bullish or bearish). Tracks a trend state: 1 → Up trend -1 → Down trend 0 → Unknown / Neutral Maintains a cancel level, which represents the price that would invalidate the current trend: In an uptrend, cancel is typically the last relevant swing low. In a downtrend, cancel is typically the last relevant swing high. This provides: Trend direction per TF (Up / Down / -) A concrete price level that acts as a structural “stop” or invalidation level. 4. MTF Trend Table (Visual Overview) If enabled, a compact table is displayed on the chart (position configurable): Columns: 5m, 15m, 30m, 1h, 4h Rows: Trend → shows Up, Down or -, with color-coded background. Cancel → shows the current cancel price for that timeframe. This creates a multi-timeframe structure dashboard that tells you: Which timeframes are currently in an Up or Down MSS-based trend. At which price the current structural view would be canceled. 5. Alert Conditions The script includes alert conditions for: Current timeframe MSS-first: Bullish MSS-first (structure break up). Bearish MSS-first (structure break down). MTF MSS-first events for: 5m, 15m, 30m, 1h, 4h (Bullish & Bearish separately). This allows you to receive notifications when a fresh structural shift happens on any of the tracked timeframes. How to Use Use Swing High / Swing Low labels to understand the current W%R cycle structure on your main timeframe. Watch for MSS-first labels to catch the first break of structure after a swing completes. Use the MTF Trend table: Trade in the direction of higher-timeframe trends. Use cancel levels as logical invalidation areas or structural stop guides. Combine the current timeframe swings with MTF bias: Example: look for long setups when H1/H4 show Up trend and price forms new bullish MSS on lower TF. The tool is suitable for both intraday and swing trading, on any symbol and timeframe. Why This Script Is Original It links cycle-based swings from Williams %R directly to MSS-first detection, rather than using generic pivot logic. It combines: W%R-driven swing definition, MSS-first structural breaks, Multi-timeframe trend state, Cancel (invalidation) levels, Alerts for MSS events on multiple TFs, into a single, coherent market-structure framework. The MTF table is not a generic dashboard: it is specifically built around this W%R-MSS-first structural model, which gives traders both trend context and exact invalidation prices. 🇹🇭 Thai Description — คำอธิบายภาษาไทย ภาพรวม อินดิเคเตอร์ W%R Cycle Swings – MTF Trend เป็นเครื่องมืออ่านโครงสร้างราคา โดยใช้ “วงจรของ Williams %R” เป็นหลักในการหา Swing High / Swing Low แล้วใช้จุด Swing เหล่านั้นมาหา MSS-first (จุดเปลี่ยนโครงสร้างครั้งแรก) จากนั้นต่อยอดไปสู่ การดูแนวโน้มหลายกรอบเวลา + ระดับ Cancel (จุดที่โครงสร้างจะถูกมองว่าพัง) แนวคิดหลัก Swing จาก Williams %R (TF ปัจจุบัน) ใช้รูปแบบ OS → OB → OS เพื่อยืนยัน Swing High และ OB → OS → OB เพื่อยืนยัน Swing Low เมื่อยืนยันแล้วจะสร้าง Label “Swing High / Swing Low” บนกราฟ และสามารถแสดงราคาบนป้ายได้ ทำให้จุด Swing มีพื้นฐานจาก “Cycle ของ W%R” ไม่ใช่แค่ high/low เฉย ๆ MSS-first บน TF ปัจจุบัน ถ้าราคาทะลุ Swing High ล่าสุด → มองเป็น Bullish MSS-first ถ้าราคาทะลุ Swing Low ล่าสุด → มองเป็น Bearish MSS-first เลือกได้ว่าจะยืนยันจาก Close หรือจาก ไส้แท่งเทียน วาดป้าย MSS + เส้นเชื่อมจาก Swing ไปยังจุดที่เกิด MSS มีตัวแปร trendBias ป้องกันไม่ให้ยิง MSS ซ้ำในทิศทางเดิมจนรก MTF MSS-first + Cancel Logic นำ Logic เดียวกันไปใช้กับ TF: 5m, 15m, 30m, 1h, 4h สำหรับแต่ละ TF จะได้: สถานะแนวโน้ม: Up / Down / Unknown ระดับ Cancel: ราคาที่ถ้าหลุดจะถือว่าโครงสร้างเทรนด์นั้นถูก “ยกเลิก” เช่น ในเทรนด์ขาขึ้น ระดับ Cancel มักมาจาก Swing Low ล่าสุด ฯลฯ MTF Table บนกราฟ แสดง Trend + Cancel ของ 5 TF ในรูปแบบตาราง อ่านง่าย: แถว Trend เป็น Up/Down พร้อมสีพื้น, แถว Cancel เป็นตัวเลขราคา ใช้ดูภาพรวมโครงสร้างหลาย TF ในมุมมองเดียว Alert Conditions แจ้งเตือน MSS-first ของ TF ปัจจุบัน แจ้งเตือน MSS-first ของ TF 5m / 15m / 30m / 1h / 4h แยก Bull / Bear วิธีใช้งาน ใช้ Swing High / Swing Low เพื่อดูว่าโครงสร้าง cycle ปัจจุบันอยู่ตรงไหน รอให้เกิด MSS-first เพื่อมองว่า “โครงสร้างราคาเริ่มกลับตัวแล้ว” ใช้ Table MTF: ดูว่า TF ไหนเป็น Up / Down ใช้ราคาบรรทัด Cancel เป็นแนว “จุดตัดขาดทุนเชิงโครงสร้าง” หรือจุดเปลี่ยนมุมมอง เทรดตามทิศทาง TF ใหญ่ แล้วหา Entry จาก MSS ของ TF เล็ก จุดเด่น / ความเป็น Original ใช้ Williams %R เป็นฐานในการสร้าง Swing Pattern แทนการใช้ Pivot ธรรมดา เชื่อม W%R Swing เข้ากับแนวคิด MSS-first อย่างเป็นระบบ มีทั้ง: ป้าย Swing ป้าย MSS + เส้นเชื่อม MTF Trend + Cancel Alert เตือน MSS ในหลาย TF อยู่ในสคริปต์เดียว เหมาะกับคนที่ต้องการอ่านโครงสร้างราคาแบบมีที่มาที่ไป ไม่ใช่แค่ตามอินดี้ตัวเดียวครับ ✅
Pine Script® インジケーター
August_Supertraderの投稿
Sentiment Heatmap with EMA Sentiment Heatmap with EMA Let’s build a script mini-LuxAlgo-style sentiment heatmap Enhanced Simple Sentiment Heatmap + Right-Side Legend Automatic legend on the right side Just like professional indicators: MAX GREED GREED NEUTRAL FEAR MAX FEAR ✔ Legend stays updated on the last bar It moves automatically as price moves. ✔ Trend EMA included (optional) 9 EMA → White 20 EMA → Red 50 EMA → Yellow 100 EMA → Blue 200 EMA → Purple Alerts (e.g., “Max Fear – Buy Zone”) ✔ Liquidity line / support-resistance auto zones Full sentiment heatmap (Greed → Fear) ✔ Right-side legend like LuxAlgo ✔ All 5 EMAs added (my colors): EMA trend cloud (9/20, 20/50, 50/200) Buy/Sell circles based on sentiment reversals Right-side legend: MAX GREED / GREED / NEUTRAL / FEAR / MAX FEAR 5 EMAs: 9 → White 20 → Red 50 → Yellow 100 → Blue 200 → Purple
Pine Script® インジケーター
AexOpritaの投稿
Net Liquidity (WALCL - TGA - ON RRP)//@version=5 indicator("Net Liquidity (WALCL - TGA - ON RRP)", overlay=false, timeframe="W") a = request.security("FRED:WALCL", "W", close) // Fed total assets (millions) b = request.security("FRED:WTREGEN", "W", close) // TGA (millions) c = request.security("FRED:RRPONTSYD","W", close) // ON RRP (millions) netliq = (a - b - c) / 1000.0 // billions plot(netliq, color=color.new(color.blue, 0), linewidth=2)
Pine Script® インジケーター
bomba_traderの投稿
WTC Step Buy Step Edition CbyCarlo📊 WT Cross Modified – Step Buy Step Edition (v4) WTC_StepBuyStep_Edition is an enhanced, practical, and optimized version of the classic WaveTrend (WT) Cross Indicator. Developed for the Step Buy Step project, this tool helps traders identify market momentum shifts, structural price zones, and potential reversal areas with high clarity and precision. 🔍 Concept & Purpose This indicator builds upon the established WaveTrend / LazyBear logic and extends it with additional structural intelligence. The goal is to make overbought/oversold phases and trend reversals easier to spot — while also highlighting historically validated price zones where the market has previously reacted strongly. ⚙️ Key Features 1️⃣ WT Cross Signals WT1 (yellow) and WT2 (purple) visualize market momentum. A WT1 cross above WT2 while below the Oversold zone (−53) can indicate potential Long opportunities. A WT1 cross below WT2 while above the Overbought zone (+53) can indicate potential Short opportunities. Signals only confirm after candle close to prevent repainting. 2️⃣ Dynamic “WT SignalZone” Panel Displayed in the top-right corner, this panel shows the last three valid price levels derived from WT signals: 🟢 LonLev – Buy support levels from previous WT Long signals 🔴 ShoLev – Sell resistance levels from previous WT Short signals These zones act as objective support/resistance structures, based on historical momentum turning points — not subjective lines. 3️⃣ Flexible Calculation Modes Choose how levels are derived from each WT signal: Pullback 50% → Midpoint of the signal candle (high+low)/2 Close → Close price of the signal candle Next Open → Open of the following bar (ideal for system testing) 📈 How to Interpret the Indicator Market Condition WT Event Meaning WT1 < −53 & CrossUp Long Signal Potential reversal / buy zone WT1 > +53 & CrossDown Short Signal Potential exhaustion / sell zone Price revisits LonLev Support Re-entry or bounce zone Price revisits ShoLev Resistance Profit-taking or short setup zone This makes the tool highly effective for: Swing traders Zone-based trading strategies Systematic re-entries Identifying structural turning points 🧠 Advantages No repainting (signals confirmed only after bar close) Works on all timeframes (from intraday to weekly) Clean overview without clutter or excessive chart markers Excellent as a filter to confirm market context 💬 Best Use Case Use WTC_StepBuyStep_Edition as a contextual confirmation tool. It does not replace a full trading system — but it gives you objective, repeatable, and statistically relevant zones where the market has reacted before. Combine it with price action, volume analysis, or trend tools for even stronger setups. © Step Buy Step • Step-Buy-Step.com Educational trading tool intended for market analysis. Not financial advice.
Pine Script® インジケーター
FirstStepBuyStepの投稿
UltimateFlow by Kate V0.2 Invite OnlyThe Ultimate Flow Script combines multiple proven tools into a single, high-precision trading assistant for short-term and intraday moves. Designed for traders who want clarity and speed, it integrates: Order Blocks – spot key supply & demand areas Chandelier Exit – manage stops and exits Fibonacci Levels – identify retracements & extensions ZLSMA Trend Filter – detect trend direction Trend Reversal Signals – capture tiny scalp moves Why it’s unique: This unique combination of tools is carefully combined so that each element reinforces the others, reducing noise and highlighting high-probability setups. Most settings are fully adjustable, letting you fine-tune it for your preferred style. Usage: Ideal for short-term trades, intraday scalps, and trend reversals Works best on clean charts, but all indicators and settings are editable Invite-Only protects the proprietary combination while still giving traders actionable insights Originality & Credits: Inspired by existing indicators, but the combination, logic, and workflow are original Closed-source to protect the methodology
Pine Script® インジケーター
UltimateFlowの投稿
KZones Global Market Insight: Timezone moving marketsModern financial markets trade 24 hours a day, making it hard to track where the action is happening. Do you wonder who is driving price action across Asia, Europe, and the Americas? This indicator lets you visualize the trading activity of different geographic sessions. For example, you can quickly see the recent move in Bitcoin was initiated by Americas selling down, represented by a large, downward-facing box. Asia and Europe followed through with more selling. Start tracking the world's market movers today! Note: This was inspired by ICT Killzones & Pivots
Pine Script® インジケーター
accutrades_netの投稿
UltimateFlow by Kate V0.1 (Invite Only)Ultimate Flow Script: Tracks market structure breaks, buy/sell entries (CE/SE), and trends with a Zero Lag SMA. Highlights Bullish & Bearish Order Blocks (OB, BB, MM) with dynamic boxes and tiny labels. Zigzag swings visualize market structure for smart entries. Play with the various settings to suit your trading style. Alerts available for MSB changes and price in OB zones. Disclaimer: This script is for educational and informational purposes only. It should be used in line with your own trading strategy, risk management, and discretion. Past performance is not indicative of future results. This script is designed for price action, market structure, and order block analysis on TradingView. It includes: Buy & Sell Signals (CE/SE) – Highlights potential entries based on market structure breaks and trend changes. Mini triangles or markers indicate possible reversals. Zero Lag SMA (ZSMA) – Smooths price action for trend confirmation without delay. Helps identify trend direction and support/resistance areas. Order Blocks (OBs) – Highlights key Bullish (Bu-OB) and Bearish (Be-OB) order blocks on the chart. Boxes dynamically extend as price evolves and include tiny labels (Bu-OB, Be-BB, MM, etc.) for clarity. Zigzag Market Structure – Draws swing highs and lows to visualize market structure breaks (MSB). How it works: OB boxes extend automatically and change when price breaks them. CE/SE markers help identify high-probability trade entries. ZSMA confirms trend direction. Alerts can be set for MSB changes or when price enters an OB zone.
Pine Script® インジケーター
UltimateFlowの投稿
CJ - ADX Trend Power v5This indicator highlights when the market enters a strong trend phase using ADX together with +DI and –DI. Green background: ADX above the threshold and +DI dominates → strong bullish trend. Red background: ADX above the threshold and –DI dominates → strong bearish trend. It also tags the exact moment when ADX breaks above the strength level, helping traders avoid choppy markets and focus only on high-momentum conditions.
Pine Script® インジケーター
famy38の投稿
COT Pressure Morpheus Starting from the TradingView COT Report indicator, I developed an oscillator to make the data visualization more quantitative. My only goal was to obtain a Percent Rank Oscillator (ranging from 0 to 100) that would allow the identification of peaks in the COT releases. It is especially useful for agricultural commodities. You can choose to monitor Large Traders, Small Traders, or Commercial Hedgers. It MUST be used exclusively on FUTURES tickers; otherwise, it will not work. In particular, the setup I recommend for commodities is the following: INPUT: Auto Futures Long - Short CFTC Code: Empty 104 5 When the indicator rises above 80 or falls below 20, we can identify an overexposure. By observing the behavior of Commercial Hedgers in particular, we can detect when they reach extreme LONG exposure (>80) or SHORT exposure (<20) and use this as an operational signal. It MUST be analyzed only on the WEEKLY chart to allow proper normalization.
Pine Script® インジケーター
Andrea_Burzichelliの投稿
sima-Prev HTF & Sessions (Tehran)This indicator automatically plots the Opening, Closing, High, and Low levels of the major global trading sessions: London, New York, and Asia. It is designed to help traders visualize intraday liquidity zones, session-based volatility, and potential reaction levels where price commonly expands or reverses. The script includes fully adjustable session times and highlights each session using clean visual markers so traders can easily identify market structure within different time windows. By displaying the Open, Close, High, and Low of each session, the indicator helps forecast areas of interest such as breakout levels, range boundaries, and session-based support/resistance. This tool is especially useful for intraday traders, scalpers, and anyone who relies on session dynamics to analyze market behavior. It works on all timeframes and all markets, including Forex, indices, metals, and crypto. No repainting is used; all levels are plotted based on completed session data.
Pine Script® インジケーター
hilvdzffの投稿
Net Profit Margin %📌 Net Profit Margin % Indicator — Short Explanation This indicator calculates and displays a company’s Net Profit Margin (NPM) using its financial statements. What it does: Pulls Net Income and Total Revenue from the company’s quarterly (FQ) or yearly (FY) financials. Calculates: Net Profit Margin = (Net Income / Revenue) × 100 Plots the NPM% as a line chart. Background turns green when margin is positive and red when negative. Shows the latest NPM value in a small info table on the chart. Purpose: Helps you quickly see whether a company is profitable and how its profit margin is trending over time.
Pine Script® インジケーター
YCGH_Capitalの投稿