始めましょう

Forecasting

Hedge Mini Calculator (Avg Long/Short + Alerts) with dca Hedge Mini Calculator is a position-management indicator for traders who use long & short hedging. It plots: Long average price Short average price Optional hedge close level (+% above hedge average) The indicator also provides alerts when price reaches the long or short average, helping you manage hedge exits and directional bias with precision. Designed for risk control, not signals. 🔹 How to Use (Simple & Clear) 1. Enter Your Positions In the indicator settings: Add the dollar amount and entry price for each long leg Add the dollar amount and entry price for each short leg Set your leverage (default x4) The indicator does not connect to your exchange. All values are entered manually. 2. Read the Lines Avg Long line → average entry of all long positions Avg Short line → average entry of all short positions Hedge Close line (optional) → price level where you may close shorts and stay long 3. Use Alerts You can create alerts for: Price reaching Avg Long Price reaching Avg Short Alerts trigger when the candle touches the average price (high–low range). 4. Manage the Hedge Typical workflow: Keep both long & short active while price is inside the range When price moves favorably and reaches your target level: Close the hedge leg (usually shorts) Keep the directional position (longs) 5. PnL Awareness The info table shows: Estimated Long PnL Estimated Short PnL Net PnL (based on margin & leverage) These values are approximations for decision support. ⚠️ Disclaimer This indicator is not a trading signal. It is a position management tool for hedging, scaling, and risk control.
Pine Script® インジケーター
Nikoskosislandの投稿
Sessions + PDH / PDLTracks the high and low of the NY AM session (8:30–12:00 NY time) and the NY PM session (12:00–16:00 NY time) from the previous day. Draws thin black lines for each high and low, starting at 8:30 AM the next day. Adds labels on the right side of the lines (AM High, AM Low, PM High, PM Low) for easy identification. Works on any timeframe chart. Purpose: Helps you see key previous day session levels at the same starting time (8:30 AM) for intraday reference.
Pine Script® インジケーター
TFergの投稿
SHFE Silver Premium vs COMEX (USD/oz)This indicator measures the SHFE–COMEX silver premium/discount in USD per troy ounce. SHFE silver is quoted in CNY per kilogram, so the script first converts SHFE:AG1! into USD/oz using the current USD/CNY exchange rate and the exact kg → troy oz factor (32.1507466). It then calculates: Premium (USD/oz) = SHFE_USD/oz − COMEX_USD/oz How to interpret: Positive bars: SHFE is trading above COMEX (premium) Negative bars: SHFE is trading below COMEX (discount) Persistent regimes can reflect currency dynamics, regional liquidity, import/export constraints, and shifts in industrial demand. How to use: Add this indicator beneath the companion overlay indicator “SHFE Silver Price Discovery (USD/oz)” to keep the price chart readable while still visualizing divergence. Watch for sustained premium expansions/contractions as inter-market confirmation signals, especially during volatile periods. This indicator is intended for macro and inter-market analysis, not short-term scalping.
Pine Script® インジケーター
HighGeckoの投稿
SHFE Silver Price Discovery (USD/oz)This indicator converts Shanghai Futures Exchange (SHFE) silver futures into USD per troy ounce and optionally overlays COMEX silver futures for direct, same-unit comparison. SHFE silver is quoted in CNY per kilogram, while COMEX is quoted in USD per troy ounce. To make SHFE prices comparable on the same chart, the script: pulls SHFE:AG1! close (CNY/kg) pulls USD/CNY FX rate converts to USD/oz using the exact kg → troy oz factor (32.1507466) Why this is useful: SHFE pricing often reflects different drivers than Western paper markets (currency effects, local liquidity, industrial demand, and regional availability). Normalizing SHFE into USD/oz lets traders and investors monitor inter-market alignment and spot periods where Eastern pricing diverges from COMEX. How to use: Use the SHFE USD/oz line as a “physical-demand-sensitive” reference. Overlay COMEX to compare regional pricing and identify multi-week divergence regimes. For the premium/discount histogram, use the companion indicator: “SHFE Silver Premium vs COMEX (USD/oz)”. This indicator is designed for macro and inter-market analysis rather than short-term scalping.
Pine Script® インジケーター
HighGeckoの投稿
SPY Daily Levels (GateKept Trading Subscriber v2)GateKept SPY Market Structure Levels This script plots intraday market structure levels specific to SPY, designed to highlight price areas where broad market risk is more likely to transition during the trading session. The indicator does not generate buy or sell signals. Its purpose is to provide a pre-session structural framework that helps traders evaluate how price behaves when it reaches areas that historically act as decision points. What the Script Plots The script displays a structured set of horizontal price levels for the current session. Each level represents a potential inflection area, where price is more likely to: Pause or consolidate Continue into the next structural range Reject and rotate back toward a prior level All levels are calculated before the session begins and remain fixed throughout the day. How the Levels Are Determined (Conceptual) The calculations are based on market structure and price acceptance principles, rather than traditional retail indicators. At a conceptual level, the script: Analyzes pre-market price behavior and reference ranges specific to SPY Identifies areas of prior agreement and disagreement Organizes these areas into a sequential structure, where interaction with one level often influences the probability of reaching the next This produces a mapped intraday framework, where price movement tends to occur between predefined areas rather than randomly. No moving averages, oscillators, or lagging momentum indicators are used. How to Use the Script The script is intended to be used as a context and decision framework, not as a signal generator. Traders should observe: Whether price accepts a level (holds and stabilizes above or below it) Or rejects a level (fails to hold and rotates away) Acceptance increases the probability of continuation toward the next plotted level. Rejection increases the probability of rotation back toward the previous level. Because SPY represents broad index exposure, these levels are often relevant for traders monitoring related instruments that reflect the same market risk. What This Script Is Not Not a buy/sell indicator Not a trend-following system Not a scalping signal tool Not based on RSI, MACD, Bollinger Bands, pivots, or pattern recognition This script is designed to provide structure, context, and clarity, allowing traders to focus on price behavior at meaningful areas rather than reacting to short-term noise.
Pine Script® インジケーター
GateKeptの投稿
QQQ Daily Levels (GateKept Trading Subscriber v2)GateKept Market Structure Levels This script plots intraday market structure levels designed to highlight price areas where directional behavior is statistically more likely to change during the current session. The indicator does not generate buy or sell signals. Instead, it provides a pre-session price framework that allows traders to evaluate how price behaves when it reaches structurally important zones. What the Script Plots The script displays a hierarchical set of horizontal price levels for the current trading session. Each level represents a potential transition point, where price is more likely to: Pause or consolidate Continue toward the next structural area Reject and rotate back toward a prior level Levels are plotted before the session begins and remain fixed throughout the day. How the Levels Are Determined (Conceptual) The calculations are based on market structure and price acceptance concepts, rather than traditional lagging indicators. At a conceptual level, the script: Evaluates pre-market price behavior and reference ranges Identifies areas of prior agreement and disagreement Organizes these areas into a sequential framework, where interaction with one level often determines the probability of reaching the next This creates a roadmap-style structure, where price movement tends to occur between predefined areas rather than randomly. No moving averages, oscillators, or pattern recognition systems are used. How to Use the Script The script is intended to be used as a context and decision framework, not as a signal generator. Traders should observe: Whether price accepts a level (holds and stabilizes) Or rejects a level (fails and rotates away) Acceptance of a level increases the probability of continuation toward the next plotted level. Rejection increases the probability of rotation back toward the previous level. The script is compatible with both ETF and futures charts that represent the same underlying market. What This Script Is Not Not a buy/sell indicator Not a trend-following system Not a scalping signal tool Not based on indicators like RSI, MACD, Bollinger Bands, or pivots The script is designed to provide structure, context, and decision clarity, allowing traders to evaluate price behavior rather than react emotionally.
Pine Script® インジケーター
GateKeptの投稿
Daily Manipulation LevelsDML - This indicator projects statistically-derived Manipulation and Distribution levels based on historical daily price behavior, helping you anticipate where price is likely to reach during the current trading session. 🔍 How It Works The DML analyzes the last 60 days (configurable) of daily candles and measures two key distances from each day's open: For Bullish Days (close > open): Manipulation Distance: How far price dropped below the open before rallying Distribution Distance: How far price extended above the open For Bearish Days (close < open): Manipulation Distance: How far price spiked above the open before selling off Distribution Distance: How far price extended below the open The indicator then calculates the average (mean or median) of these historical distances and projects them from the current session's open (6pm ET for futures). 📊 The Levels O (Orange): Current session open - your anchor point +D: Bullish distribution target (projected high) -D: Bearish distribution target (projected low) +M: Bearish manipulation zone (where shorts get trapped before a selloff) -M: Bullish manipulation zone (where longs get trapped before a rally) 📈 How To Use It 1. Identify the Daily Bias Wait for price to sweep a manipulation level and show signs of reversal. A sweep of -M followed by bullish structure suggests an expansion toward +D. A sweep of +M followed by bearish structure suggests expansion toward -D. 2. Power of Three Framework The levels align with ICT's Power of Three concept: Accumulation: Price consolidates near the open Manipulation: Price sweeps liquidity at +M or -M, trapping traders Distribution: Price expands toward the opposite extreme (+D or -D) 3. Confluence Zones Use these levels alongside other concepts like Fair Value Gaps, Order Blocks, and liquidity pools. When a DML level aligns with an FVG or key swing point, the probability of reaction increases significantly. 4. Target Setting After a manipulation sweep and reversal confirmation (CISD), use the distribution level as your target. The statistical nature of these levels means price reaches them more often than not. ⚙️ Settings Lookback Periods: Number of historical days to analyze (default: 60) Calculation Method: Mean, Median, or Both - Median is less affected by outlier days Calculation Mode: Points (raw price distance) or Percent (normalized by open price) Level Visibility: Toggle individual levels on/off Colors & Transparency: Fully customizable appearance 💡 Tips On volatile days, expect manipulation to exceed the average levels - use them as zones, not exact prices When "Both" is selected, solid lines show the mean and dashed lines show the median - if they're close together, the projection is more reliable The levels reset at 6pm ET each day (futures session open) Works best on intraday timeframes (1m - 1H) for NQ, ES, and other index futures ⚠️ Disclaimer This indicator is a statistical tool based on historical averages. Past performance does not guarantee future results. Always use proper risk management and confirm signals with price action before entering trades.
Pine Script® インジケーター
MomentumCapitalxの投稿
A-Bot Promax 2026USER GUIDE – BUY & SELL (MULTI-TIMEFRAME) A-Bot Promax 2026 applies Multi-Timeframe Analysis with a TF × 3 confirmation rule. 🔹 BUY Setup Select your preferred trading timeframe (TF). When the white line generates a BUY signal, mark or note the exact candle/time. Switch to the higher timeframe (HTF = TF × 3) for confirmation Example: TF = Day → HTF = Week TF = Week → HTF = Month If the corresponding area on the HTF shows a green background, the BUY signal is considered valid. Take profit / exit BUY when: The HTF background turns red, or The white line prints a SELL signal (from that point onward). 🔹 SELL Setup Select your preferred trading timeframe (TF). When the white line generates a SELL signal, mark or note the exact candle/time. Switch to the higher timeframe (HTF = TF × 3) for confirmation. If the corresponding area on the HTF shows a red background, the SELL signal is considered valid. Take profit / exit SELL when: The HTF background turns green, or The white line prints a BUY signal (from that point onward). ⚠️ Disclaimer This indicator is provided for educational and analytical purposes only. It does not constitute financial advice, investment recommendations, or guarantees of profit. Trading involves significant risk, and all trading decisions and outcomes are the sole responsibility of the user. The author assumes no liability for any losses incurred from the use of this indicator.
Pine Script® インジケーター
viethunghp968の投稿
Initial Balance and FAContext-first intraday framework combining Initial Balance, volatility regime, and higher-timeframe reference levels. This indicator is built around the principle that markets alternate between balance and imbalance, and that the most reliable opportunities emerge when price interacts with well-defined reference levels. Rather than relying on reactive signals, the framework emphasizes context first—using structurally important levels derived from prior sessions and higher timeframes to understand where acceptance, rejection, and initiative activity are most likely to occur. The goal is not prediction, but clarity: identifying where price is operating relative to its recent value, range, and volatility regime. The approach deliberately separates calculation from interpretation. Core reference levels remain stable across timeframes, while volatility conditions are evaluated using a higher-timeframe lens to avoid noise and overfitting. This allows intraday traders to operate with a consistent directional bias, regardless of chart resolution, and focus execution around high-quality locations rather than chasing momentum. The indicator is designed to support discretionary decision-making, reinforcing disciplined trade selection, risk awareness, and alignment with broader market structure RISK Disclaimer This indicator is provided for educational and analytical purposes only and does not constitute investment advice or trade recommendations. Markets involve risk, and past behavior does not guarantee future results. Users are solely responsible for their trading decisions, position sizing, and risk management. Always validate signals with your own analysis and trade within predefined risk limits.
Pine Script® インジケーター
EquityandSecurityの投稿
TSLA Breakout Breakdown LevelsThis indicator plots the breakout/breakdown levels for TSLA on Jan 12 2026 and is designed to complement my Strategy 5 – Opening Bell Breakout system. It automatically draws: Bullish and bearish entry lines based on the pre‑market high and low for the day (e.g., ~442.68 and ~440.21), with clearly marked stops and three profit targets. A shaded “no‑trade zone” between the pre‑market high and low to discourage entries in the overnight range. Colour‑coded horizontal lines for each level and descriptive labels on the latest bar for quick reference. Titles are fixed strings to satisfy Pine Script’s requirement that hline() titles be compile‑time constants. A customizable underlyingSymbol variable if you wish to adapt the script to another ticker. To use this indicator on future sessions, simply update the bullEntry, bearEntry and associated stop/target variables to reflect the current pre‑market range. This script does not generate buy or sell signals by itself; it provides visual reference levels to be used alongside the Strategy 5 Breakout Signals script. Always test on paper first, and adjust the levels to match your own pre‑market analysis. For more details on writing helpful script descriptions and how to publish Pine scripts, see TradingView’s documentation. This indicator is for educational purposes only and not financial advice.
Pine Script® インジケーター
obviousPear1979の投稿
DRAMA Channel [AiQ PREMIUM]DRAMA Channel Designed by KS AiQ PREMIUM is not just an indicator; it is a complete, visually immersive trading ecosystem designed for traders who demand precision, aesthetics, and data-driven confidence. Built upon advanced Fractal Adaptive Moving Average (FRAMA) logic and fused with a proprietary volatility engine, AiQ PREMIUM filters out market noise to reveal high-probability institutional setups. 💎 Core Features 1. DRAMA Volatility Engine (D-FRAMA) Unlike standard Moving Averages, our adaptive algorithm adjusts to market fractal dimensions. It tightens during consolidation to avoid false signals and expands during trends to capture the full move. 2. Multi-Timeframe (MTF) Matrix Stop guessing the trend. The built-in "Trend Matrix" scans M5, M15, M30, H1, and H4 timeframes in real-time. Signals are only generated when there is a confluence of momentum. 3. AiQ Confidence Score & Win Rate The dashboard calculates a dynamic Confidence Score (1-5 Stars) based on historical performance, trend alignment, and volatility strength. ⭐⭐⭐⭐⭐ = Strong Institutional Alignment ⭐ = Risky / Counter-trend 4. Auto-Fibonacci Extensions & Risk Management Smart Entries: Clear visual signals with glassmorphism UI. Dynamic Risk: SL/TP are calculated using ATR (Average True Range) to adapt to market volatility. Auto Targets: Automatically projects TP1, TP2, TP3 (Fib 2.618), and TP4 (Fib 4.236). 5. Premium Visual Experience Choose your trading personality with our Theme Engine: 🏆 Black Gold: Luxury, high-contrast dark mode. 🦄 Cyber Neon: Modern, vibrant aesthetics. ⚪ Clean Quant: Minimalist institutional look. 🛠️ How to Use Wait for the Signal: Look for the 🚀 LONG SETUP or 🚀 SHORT SETUP badge. Check the Stars: Ideally, take trades with 3 stars or above on the dashboard. Confirm with Matrix: Ensure the MTF Matrix (Top Right) shows "BULL" for Longs or "BEAR" for Shorts on higher timeframes (H1/H4). Manage the Trade: Secure partial profits at ✅ TP1. Move SL to Breakeven at ✅ TP2. Let runners fly to ✅ TP3 and ✅ TP4. ⚠️ Disclaimer - Trading involves high risk. This tool is designed to assist your analysis, not to replace it. Past performance is not indicative of future results. Always use proper risk management.
Pine Script® インジケーター
KS0919の投稿
1
15M Swing Structure & Retracement Algo (RB Trading)This script is an intraday structure analysis tool designed to map swing behavior retracement zones and projected extensions on the fifteen minute chart. It is purpose built for EUR/USD GBP/CAD and USD/CAD and is not intended for other markets or timeframes. The tool highlights mathematically derived retracement areas after confirmed swing formations to help traders evaluate structure rather than predict direction. Intended Use ✓ Timeframe fifteen minute only ✓ Markets EUR/USD GBP/CAD USD/CAD ✓ Style intraday swing structure analysis ✓ Best during London and New York sessions ✓ Not designed for Asia session conditions Core Logic ✓ Swing highs and lows detected using a configurable lookback ✓ Trend context defined by 50 and 200 EMA relationship ✓ Swing range measured between most recent confirmed pivots ✓ Key retracement zone calculated between 50 and 61.8 percent ✓ Extension reference levels projected beyond the swing range Visual Output ✓ Swing connection line marking the measured range ✓ Retracement zone shading when price enters the 50 to 61.8 area ✓ Extension reference levels at 161.8 200 and 261.8 ✓ Color coding reflects structural context • Green for bullish structure • Red for bearish structure Using RB Trading DeM Bars for Confirmation For additional confirmation users can combine this script with the free RB Trading DeM Bars indicator. ✓ The DeM Bars appear as a histogram at the bottom of the chart ✓ Best used to assess pullback quality into the retracement zone ✓ Ideal confirmation occurs when momentum fades during the pullback ✓ Expansion in momentum as price exits the zone supports continuation The DeM Bars are not a signal tool on their own. They are designed to confirm exhaustion or reacceleration as price interacts with the structural retracement area. Why Fifteen Minute The calculations are calibrated for intraday behavior on the fifteen minute chart. Higher timeframes develop structure too slowly for active evaluation. Lower timeframes introduce excess noise and reduce swing reliability. Structure Interpretation Bullish structure ✓ 50 EMA above 200 EMA ✓ Retracements measured from swing high ✓ Extensions projected higher Bearish structure ✓ 50 EMA below 200 EMA ✓ Retracements measured from swing low ✓ Extensions projected lower The script reflects current structure only. It does not determine trade direction or outcome. Inputs ✓ EMA lengths adjustable ✓ Swing lookback sensitivity ✓ Optional display toggles for zones lines and labels ✓ Reference level buffer for spread or volatility awareness Important Notes This tool analyzes historical price structure only. It does not provide entry signals predictions or guarantees. All levels are mathematical projections based on past price action and may or may not be respected in future movement. Educational use only. Proper risk management is required. Test thoroughly before live application. RB Trading
Pine Script® インジケーター
RB_Tの投稿
T3 MACD BB flow What this script does – in plain words Smoothes the MACD with a special T3 filter, turning the raw MACD into a smoother line so short‑term noise is reduced. Draws Bollinger‑style bands around that smoothed MACD, giving a “mid line” and upper/lower envelopes that show how far the line is from its recent average. Colors the main line green when it’s rising and red when it’s falling, helping you see the trend at a glance. Adds a bold zero line plus light gray markers on the bands so you can spot crossovers easily. Includes a translucent blue fill between the upper and lower bands for visual emphasis. This gives a clear, color‑coded view of MACD momentum plus volatility bands—all on the same indicator pane.
Pine Script® インジケーター
luckyroosterの投稿
Bull Engulf @ Rolling Support + HTF Confluence (2-8w) This indicator is designed to identify high-probability bullish reversal setups that occur at proven support levels, with confirmation from higher timeframes. It is built for swing traders targeting 2–8 week moves, prioritizing win rate and trade quality over frequency. The script focuses on institutional-style price behavior: pullbacks into support, seller exhaustion, and clear buyer confirmation before entry. Core Logic A signal is generated only when all of the following align: Bullish Engulfing Candle Current candle fully engulfs the prior candle’s body Optional filters ensure strong momentum (close above prior high, meaningful candle size) Rolling-Low Support Price must be near a rolling support level based on recent swing lows Support adapts dynamically to market structure Higher Timeframe (HTF) Confluence Daily setups can require alignment with weekly and monthly support Weekly setups can require monthly support This dramatically reduces low-quality signals Strongest-Only Scoring System Each setup is scored based on: Proximity to support HTF confluence Candle strength Volume and volatility filters Only setups meeting a minimum score threshold are shown Signals & Labels SETUP / TOP label Appears when a valid bullish engulfing forms at support with HTF confirmation. ENTRY label Appears when price breaks above the high of the engulfing candle (confirmation entry). Support Lines Local (rolling) support Weekly and Monthly support (when applicable) Each label includes: Timeframe Score Support distance Suggested risk level A standardized options structure for 2–8 week trades Intended Trading Style Timeframe: Daily and Weekly charts Trade Duration: ~2–8 weeks Market Type: Stocks (best on liquid, mid/large-cap names) Approach: Wait for price to come to support Wait for buyers to prove control Enter only after confirmation This indicator is not designed for: Day trading Chasing breakouts High-frequency signals Fewer signals is intentional. How to Use Apply the indicator to Daily or Weekly charts Wait for a SETUP/TOP label at support Enter only after the ENTRY confirmation (break above engulfing high) Use the displayed risk level to define invalidation Let the trade develop over multiple weeks Alerts can be enabled for: Pre-market watchlist signals (yesterday’s setups) Confirmed signals at the close Entry confirmation Why This Works Markets often reverse at support, not randomly. By combining: Structural support Price-action confirmation Higher timeframe alignment this indicator filters out most noise and focuses on areas where larger participants are likely active. Disclaimer This indicator is for educational and analytical purposes only. It does not constitute financial advice. Always manage risk appropriately.
Pine Script® インジケーター
cooperj1187の投稿