始めましょう

Strat

ATR + STRAT Dashboard (LAST + DIR + REV) + Est MovesATR + STRAT Dashboard is a multi-timeframe market structure indicator built around The Strat and ATR context. It summarizes higher-timeframe control (buyers vs sellers), highlights key Strat conditions (inside/outside/2-1-2 style transitions), and flags common reversal candles (hammer / shooting star style signals) to help spot potential turns. It also includes ATR-based context and estimated move guidance so you can quickly gauge whether price has “room” to run or is extended. What it shows MTF Dashboard: quick read of trend/control across multiple timeframes Direction/Control: color-based bias (buyers vs sellers in charge) Reversal Flags: highlights reversal-style candles for awareness (not guaranteed) ATR Context + Estimated Moves: volatility-based framework for targets/expectations Non-repainting HTF behavior: designed to use closed higher-timeframe bars to reduce repaint surprises Note: This tool is for structure + context, not trade signals by itself. Always confirm with your plan/risk management.
Pine Script® インジケーター
melanicdaeの投稿
Strat Structure Engine Strat Structure Engine + Trapped Traders – TradingView Public Library Description (Moderator-Optimized) Overview: The Strat Structure Engine + Trapped Traders script is a self-contained price action indicator that identifies high-probability market structure patterns using The Strat methodology. It integrates bar-based structure, volatility (ATR), and volume analysis to detect potential reversals, exhaustion points, and trapped trader scenarios directly on the chart. Unlike generic indicators, it grades signals for reliability and visual clarity, providing actionable insight for traders. Originality and Purpose: This script is original because it combines multiple structure-based patterns into a single, coherent system: 3-Bar → Failed 2 (3→F2) – A tiered scoring system evaluates the strength of a strict 3-bar structure followed by a Failed 2 bar. 2-Bar → Failed 2 (2→F2, A+ only) – Filters only the strongest 2-bar setups followed by a Failed 2 for high-confidence reversal signals. Failed 2 → Failed 2 (Dragon’s Tail / F2→F2) – Detects consecutive Failed 2 bars in opposite directions, signaling trapped traders and quick reversals. Each pattern is evaluated using objective criteria: bar range relative to ATR, Failed 2 close relative to the preceding structure, body-to-range ratio, and volume spikes compared to recent averages. The combination of multiple patterns with tiered scoring and volume confirmation is unique and cannot be reproduced by simply merging standard indicators. Signal Evaluation and Scoring: 1. 3→F2 (Tiered Scoring) Criteria: 3-bar range vs ATR Failed 2 close relative to 3-bar midpoint Body-to-range ratio Volume vs recent SMA Tier Grades: A+, A, B, — Purpose: Helps traders prioritize high-confidence reversal setups while filtering out weaker signals. 2. 2→F2 (A+ Only) Evaluates strict 2-bar structures followed by a Failed 2 bar. Displays only the strongest A+ setups to reduce noise. 3. F2→F2 (Dragon’s Tail) Detects consecutive Failed 2 bars in opposite directions. Highlights trapped trader zones and potential rapid reversals. Volume and Volatility Integration: ATR normalization ensures bar ranges are contextualized to market volatility. SMA volume averaging confirms unusual activity, filtering signals with low participation. This ensures signals are structurally valid and contextually significant. Chart and Visual Clarity: Labels are color-coded (green for bullish, red for bearish) and include tier/score for easy interpretation. Only confirmed patterns are labeled, avoiding clutter or ambiguous markings. Works on standard candlestick charts (does not use Heikin Ashi, Renko, or Range bars), ensuring realistic and reliable signals. Customization and Alerts: Toggle each pattern on/off: 3→F2, 2→F2, F2→F2 Adjust ATR length and volume average period per instrument or timeframe. Alerts available for all patterns for bar-close confirmation, enabling real-time monitoring or integration with trading systems. Practical Trading Use: Identify exhaustion points, trapped traders, and reversals. Can be used alongside VWAP, liquidity zones, fair value gaps, and session extremes for enhanced entry and exit decisions. Focus on A+ / A tier signals for execution; use B-tier signals for context or partial entries. Designed for multiple instruments (equities, futures, Forex) and adaptable across timeframes. Compliance and Risk Notes: Signals are historical, not predictive. Follow proper risk management and do not rely solely on indicator signals. Past performance does not guarantee future results. Does not use request.security() with lookahead; all signals are confirmed on bar close. ✅ Key Advantages: Fully self-contained, original methodology. Multi-pattern integration with tiered scoring for reliability. Volume and ATR confirmation reduces noise and false signals. Clean, uncluttered chart output that is easy to read and interpret. This version explicitly addresses moderation points: Originality: explains why the mashup is necessary and unique. Usefulness: shows exactly how traders can use it. Chart clarity: confirms labels are meaningful, non-redundant, and easy to read. Signal realism: bars are confirmed, no lookahead used.
Pine Script® インジケーター
samb817の投稿
The Strat Candle Labels & Color Inc F2D F2UThis script uses TheStrat candle numbers 1, 2D, 2U, 3 and places the text below or above. I have also now added the Failed 2D/2U labels. You can also change the text size. This also allows you to change the colors of the candles with two options for the 1 & 3 so you can color them in the direction they are going. For example a 1 that is green can be green and a 1 that is red can be red.
Pine Script® インジケーター
ChuckTheStratTraderの投稿
StratNinjaTable - VerticalA Pine Script v6 indicator that displays a vertical table with key The Strat data and supporting metrics. ✦ Table Structure: Overview: Ticker – the stock symbol. TF – the chart’s main timeframe. MFI – Money Flow Index with selectable timeframe. ATR – Average True Range with color coding: Green – below 3%. Yellow – between 3% and 6%. Red – above 6%. Timeframes: Displayed vertically (5m, 15m, 1H, D, W, M, etc.). Each shows the current bar type according to The Strat (1, 2U, 2D, 3). Text color reflects candle direction (green = close above open, red = close below open). Includes a countdown timer to bar close. Fundamentals: Market Cap – in billions. Sector – stock sector. SMA20 Δ – distance from the 20-period SMA (in %). Avg Volume (30d) – average 30-day volume (in millions). ✦ Adjustments Made: Removed the Strat Pattern section completely. Removed the DIR column – direction is now represented by Strat cell text color. Reordered Overview section: Ticker → TF → MFI → ATR. ATR now has three levels of coloring (Green/Yellow/Red) for >3% and >6%
Pine Script® インジケーター
koriatmanagementの投稿
SHYY-TFC-Horizontal V2SHYY-TFC-Horizontal V2 – Multi-Timeframe Clarity for The Strat Traders SHYY-TFC-Horizontal V2 is a powerful, clean, and efficient overlay designed for serious traders who use Rob Smith’s The Strat. This real-time table gives you instant visual insight across all key timeframes – from 5 minutes to monthly – with: Candle direction (bullish, bearish, neutral) Strat bar type (1, 2U, 2D, 3) Live countdown to bar close Compact horizontal layout that saves space and enhances clarity Fully customizable table position to fit any chart setup Built with no lookahead bias, this version meets TradingView’s script publishing standards and is optimized for actionable, real-time decisions. Ideal for: Scalpers who need fast confirmation Swing traders aligning entries with time frame continuity Price action traders following The Strat methodology Trade with confidence. See the full picture. React faster. SHYY-TFC-Horizontal V2 – built to make you faster, sharper, and more in control.
Pine Script® インジケーター
shayy110の投稿
Multi-Timeframe Continuity Custom Candle ConfirmationMulti-Timeframe Continuity Custom Candle Confirmation Overview The Timeframe Continuity Indicator is a versatile tool designed to help traders identify alignment between their current chart’s candlestick direction and higher timeframes of their choice. By coloring bars on the current chart (e.g., 1-minute) based on the directional alignment with selected higher timeframes (e.g., 10-minute, daily), this indicator provides a visual cue for confirming trends across multiple timeframes—a concept known as Timeframe Continuity. This approach is particularly useful for day traders, swing traders, and scalpers looking to ensure their trades align with broader market trends, reducing the risk of trading against the prevailing momentum. Originality and Usefulness This indicator is an original creation, built from scratch to address a common challenge in trading: ensuring that price action on a lower timeframe aligns with the trend on higher timeframes. Unlike many trend-following indicators that rely on moving averages, oscillators, or other lagging metrics, this script directly compares the bullish or bearish direction of candlesticks across timeframes. It introduces the following unique features: Customizable Timeframes: Users can select from a range of higher timeframes (5m, 10m, 15m, 30m, 1h, 2h, 4h, 1d, 1w, 1M) to check for alignment, making it adaptable to various trading styles. Neutral Candle Handling: The script accounts for neutral candles (where close == open) on the current timeframe by allowing them to inherit the direction of the higher timeframe, ensuring continuity in trend visualization. Table: A table displays the direction of each selected timeframe and the current timeframe, helping identify direction in the event you don't want to color bars. Toggles for Flexibility: Options to disable bar coloring and the debug table allow users to customize the indicator’s visual output for cleaner charts or focused analysis. This indicator is not a mashup of existing scripts but a purpose-built tool to visualize timeframe alignment directly through candlestick direction, offering traders a straightforward way to confirm trend consistency. What It Does The Timeframe Continuity Indicator colors bars on your chart when the direction of the current timeframe’s candlestick (bullish, bearish, or neutral) aligns with the direction of the selected higher timeframes: Lime: The current bar (e.g., 1m) is bullish or neutral, and all selected higher timeframes (e.g., 10m) are bullish. Pink: The current bar is bearish or neutral, and all selected higher timeframes are bearish. Default Color: If the directions don’t align (e.g., 1m bar is bearish but 10m is bullish), the bar remains the default chart color. The indicator also includes a debug table (toggleable) that shows the direction of each selected timeframe and the current timeframe, helping traders diagnose alignment issues. How It Works The script uses the following methodology: 1. Direction Calculation: For each timeframe (current and selected higher timeframes), the script determines the candlestick’s direction: Bullish (1): close > open / Bearish (-1): close < open / Neutral (0): close == open Higher timeframe directions are fetched using Pine Script’s request.security function, ensuring accurate data retrieval. 2. Alignment Check: The script checks if all selected higher timeframes are uniformly bullish (full_bullish) or bearish (full_bearish). o A higher timeframe must have a clear direction (bullish or bearish) to trigger coloring. If any selected timeframe is neutral, alignment fails, and no coloring occurs. 3. Coloring Logic: The current bar is colored only if its direction aligns with the higher timeframes: Lime if the higher timeframes are bullish and the current bar is bullish or neutral. Maroon if the higher timeframes are bearish and the current bar is bearish or neutral. If the current bar’s direction opposes the higher timeframe (e.g., 1m bearish, 10m bullish), the bar remains uncolored. Users can disable bar coloring entirely via the settings, leaving bars in their default chart color. 4. Direction Table: A table in the top-right corner (toggleable) displays the direction of each selected timeframe and the current timeframe, using color-coded labels (green for bullish, red for bearish, gray for neutral). This feature helps traders understand why a bar is or isn’t colored, making the indicator accessible to users unfamiliar with Pine Script. How to Use 1. Add the Indicator: Add the "Timeframe Continuity Indicator" to your chart in TradingView (e.g., a 1m chart of SPY). 2. Configure Settings: Timeframe Selection: Check the boxes for the higher timeframes you want to compare against (default: 10m). Options include 5m, 10m, 15m, 30m, 1h, 2h, 4h, 1D, 1W, and 1M. Select multiple timeframes if you want to ensure alignment across all of them (e.g., 10m and 1d). Enable Bar Coloring: Default: true (bars are colored lime or maroon when aligned). Set to false to disable coloring and keep the default chart colors. Show Table: Default: true (table is displayed in the top-right corner). Set to false to hide the table for a cleaner chart. 3. Interpret the Output: Colored Bars: Lime bars indicate the current bar (e.g., 1m) is bullish or neutral, and all selected higher timeframes are bullish. Maroon bars indicate the current bar is bearish or neutral, and all selected higher timeframes are bearish. Uncolored bars (default chart color) indicate a mismatch (e.g., 1m bar is bearish while 10m is bullish) or no coloring if disabled. Direction Table: Check the table to see the direction of each selected timeframe and the current timeframe. 4. Example Use Case: On a 1m chart of SPY, select the 10m timeframe. If the 10m timeframe is bearish, 1m bars that are bearish or neutral will color maroon, confirming you’re trading with the higher timeframe’s trend. If a 1m bar is bullish while the 10m is bearish, it remains uncolored, signaling a potential misalignment to avoid trading. Underlying Concepts The indicator is based on the concept of Timeframe Continuity, a strategy used by traders to ensure that price action on a lower timeframe aligns with the trend on higher timeframes. This reduces the risk of entering trades against the broader market direction. The script directly compares candlestick directions (bullish, bearish, or neutral) rather than relying on lagging indicators like moving averages or RSI, providing a real-time, price-action-based confirmation of trend alignment. The handling of neutral candles ensures that minor indecision on the lower timeframe doesn’t interrupt the visualization of the higher timeframe’s trend. Why This Indicator? Simplicity: Directly compares candlestick directions, avoiding complex calculations or lagging indicators. Flexibility: Customizable timeframes and toggles cater to various trading strategies. Transparency: The debug table makes the indicator’s logic accessible to all users, not just those who can read Pine Script. Practicality: Helps traders confirm trend alignment, a key factor in successful trading across timeframes.
Pine Script® インジケーター
BigGuavaTradingの投稿
2
Failed 2D & Failed 2U BarsI created this indicator to plot a triangle when a candle is either 1) a failed 2 down--the candle breaks the low of the prior candle but closes green (or higher than its opening price) and doesn't break the high of the previous candle; and 2) a failed 2 up--high of the prior candle is broken but the bar is red and does not break the low of the prior candle. It has alerts which you can set up in the alert system. I think that this candle is one of the most telling and powerful when it comes to candle analysis. R.I.P. Rob Smith, Creator of The Strat.
Pine Script® インジケーター
hardwaybetsの投稿
BUY/SELL Timeframe ContinuityTime frame continuity refers to the alignment of price trends across multiple time frames. This means that the price movement is showing a consistent trend (either up or down) on various timeframes, like the 5-minute, 30-minute, hourly, and daily charts. Why is it important? Confirms Trend Strength: When multiple timeframes align, it indicates a strong and sustained trend. Risk Management: Trading in the direction of the aligned trend can reduce risk. This indicator checks if the current price of a selected timeframe is above or below its opening price. A buy/sell signal appears the second all bullish timeframes align (buy) or all bearish timeframes align. You can choose to paint the candles when the buy/sell conditions happen. You can select up to 10 different timeframes. NOTE: With this indicator I prefer timeframes 15m, 30m, 1H, 4H, D, 5D, W - Together these timeframes are great for short-term trends on any stock.
Pine Script® インジケーター
johnjsmithの投稿
2
Simultaneous INSIDE Bar Break IndicatorSimultaneous Inside Bar Break Indicator (SIBBI) for The Strat Community Overview: The Simultaneous Inside Bar Break Indicator (SIBBI) is designed to help traders using The Strat methodology identify one of the most powerful breakout patterns: the Simultaneous Inside Bar Break across multiple symbols. This indicator detects when all four user-selected symbols form inside bars on the previous candle and then break those inside bars in the same direction (either bullish or bearish) on the current candle. Inside bars represent consolidation periods where price action does not break the high or low of the previous candle. When a simultaneous break occurs across multiple symbols, this often signals a strong move in the market, making this a key actionable signal in The Strat trading strategy. Key Features: Multi-Symbol Analysis: You can track up to four different symbols simultaneously. By default, the indicator comes with SPY, QQQ, IWM, and DIA, but you can modify these to track any other assets or symbols. Inside Bar Detection: The indicator checks whether all four symbols have inside bars on the previous candle. It only triggers when all symbols meet this condition, making it a highly specific and reliable signal. Simultaneous Break Detection: Once all symbols have inside bars, the indicator waits for a breakout in the same direction across all four symbols. A simultaneous bullish break (prices breaking above the previous candle’s high) triggers a green label, while a simultaneous bearish break (prices breaking below the previous candle’s low) triggers a red label. Dynamic Label Timeframe: The indicator dynamically adjusts the timeframe in the label based on the user’s selected timeframe. This allows traders to know precisely which timeframe the break is occurring on. If the user selects "Chart Timeframe," the indicator will evolve with the current chart's timeframe, making it more versatile. Timeframe Flexibility: The indicator can be set to analyze any timeframe—15-minute, 30-minute, 60-minute, daily, weekly, and so on. It only works for the specific timeframe you set it to in the settings. If set to "Chart Timeframe," the label will adapt dynamically based on the timeframe you are currently viewing. Customizable Labels: The user can choose the size of the labels (tiny, small, or normal), ensuring that the visual output is tailored to individual preferences and chart layouts. Best Use Case: The Simultaneous Inside Bar Break Indicator is particularly powerful when applied to multiple timeframes. Here’s how to use it for maximum impact: Multi-Timeframe Setup: Set the indicator on various timeframes (e.g., 15-minute, 30-minute, 60-minute, and daily) across multiple charts. This allows you to monitor different timeframes and identify when lower timeframe breaks trigger potential moves on higher timeframes. Anticipating Strong Moves: When a simultaneous inside bar break occurs on one timeframe (e.g., 30-minute), keep an eye on the higher timeframes (e.g., 60-minute or daily) to see if those timeframes also break. This stacking of inside bar breaks can signal powerful market moves. Higher Conviction Signals: The indicator is designed to provide high-conviction signals. Since it requires all four symbols to break in the same direction simultaneously, it reduces false signals and focuses on higher probability setups, which is crucial for traders using The Strat to time their trades effectively. How the Indicator Works: Inside Bar Formation: The indicator first checks that all four selected symbols had inside bars in the previous bar (i.e., the current high and low are contained within the previous bar’s high and low). Simultaneous Break Detection: After detecting inside bars, the indicator checks if all four symbols break out in the same direction—bullish (breaking above the previous bar’s high) or bearish (breaking below the previous bar’s low). Label Display: When a simultaneous inside bar break occurs, a label is plotted on the chart—either green for a bullish break (below the candle) or red for a bearish break (above the candle). The label will display the timeframe you set in the settings (e.g., "IBSB 60" for a 60-minute break). Chart Timeframe Option: If you prefer, you can set the indicator to evolve with the chart’s current timeframe. In this mode, the label will not show a specific timeframe but will still display the simultaneous inside bar break when it occurs. Recommendations for Usage: Focus on Multiple Timeframes: The Strat methodology is all about understanding the relationship between different timeframes. Use this indicator on multiple timeframes to get a better picture of potential moves. Pair with Other Strat Techniques: This indicator is most powerful when combined with other Strat tools, such as broadening formations, timeframe continuity, and actionable signals (e.g., 2-2 reversals). The simultaneous inside bar break can help confirm or invalidate other signals. Customize Symbols and Timeframes: Although the default symbols are SPY, QQQ, IWM, and DIA, feel free to replace them with symbols more relevant to your trading. This indicator works well across equities, indices, futures, and forex pairs. How to Set It Up: Select Symbols: Choose four symbols that you want to track. These can be index ETFs (like SPY and QQQ), individual stocks, or any other tradable instruments. Set Timeframe: In the indicator’s settings, choose a specific timeframe (e.g., 15-minute, 30-minute, daily). The label will reflect the selected timeframe, making it clear which time-based break you are seeing. Optional - Chart Timeframe Mode: If you want the indicator to adapt to the chart’s current timeframe, select the "Chart Timeframe" option in the settings. The indicator will plot the breaks without showing a specific timeframe in the label. Customize Label Size: Depending on your chart layout and personal preference, you can adjust the size of the labels (tiny, small, or normal) in the settings. Conclusion: The Simultaneous Inside Bar Break Indicator is a powerful tool for traders using The Strat methodology, offering a highly specific and reliable signal that can indicate potential large market moves. By monitoring multiple symbols and timeframes, you can gain deeper insight into the market's behavior and act with greater confidence. This indicator is ideal for traders looking to catch high-conviction moves and align their trades with broader market continuity. Note: The indicator works best when paired with multi-timeframe analysis, allowing you to see how breaks on lower timeframes might influence larger trends. For traders who prefer simplicity, setting it to the "Chart Timeframe" mode offers flexibility while maintaining the core benefits of this indicator.
Pine Script® インジケーター
mmtrades5643の投稿
The Strat with TFC & Combo DashIntroduction: This indicator is designed to implement "The Strat" trading strategy combined with a Timeframe Continuity Dashboard and Combo Dashboard. The Strat is a robust trading methodology that relies on price action and candlestick formations to make trading decisions. This script helps traders to identify specific bar types such as Inside Bars (1), Continuation Up Bars (2u), Continuation Down Bars (2d), and Outside Bars (3) across multiple timeframes. It visually highlights these bar types on the chart and provides a comprehensive dashboard displaying the current state of the selected timeframes. Key Features: Timeframe Continuity Dashboard: Displays arrows and bar types for up to four selected timeframes. Strat Combos Dashboard: Shows the previous and current bar types to easily spot trading setups. Customizable Colors and Labels: Options to personalize the colors and labels for Inside and Outside bars. Adjustable Dashboard Position and Size: Allows users to set the location and size of the dashboard for better visual alignment. Inputs: TFC & Combo Dash Configuration: Show TFC & Combo Dashboard: Toggle to display the dashboard. Show Strat Combos: Toggle to display Strat combo setups. Location: Dropdown to select the position of the dashboard on the chart. Size: Dropdown to choose between desktop and mobile view. Timeframe Selection: Timeframe 1: Primary timeframe for analysis. Timeframe 2: Secondary timeframe for analysis. Timeframe 3: Tertiary timeframe for analysis. Timeframe 4: Quaternary timeframe for analysis. Candle Visuals: Show Inside Bar Label: Option to show label instead of color for Inside bars. Inside Bar Color: Color picker for Inside bars. Show Outside Bar Label: Option to show label instead of color for Outside bars. Outside Bar Color: Color picker for Outside bars. TFC & Combo DashboardFunctions: The script fetches values for the selected timeframes and computes the bar types and corresponding visual elements such as arrows and background colors. The dashboard displays this information in a tabular format for easy reference during trading. The dashboard is dynamically created based on user input for position and size. It shows the selected timeframes, bar types, and combo setups, providing a quick overview of the market conditions across multiple timeframes. Timeframes: Displays the four user chosen timeframes that the dashboard fetches data from. Arrow and Color: Functions to set the arrow direction and color based on current bar action. Green and up arrow: price is above it's candle open. Red and down arrow: price is below it's candles open. Background Color: Functions to set background color based on the bar type. White for an outside bar(3), yellow for an inside bar(1), no color for a continuation bar(2). Strat Candle Combos: Functions to determine if the bar is an Inside(1), Continuation Up(2u), Continuation Down(2d), or Outside bar(3). Shows the previous bar and the current bar for the user's chosen timeframes. Candle Visuals: The script plots labels and colors for Inside and Outside bars based on user preferences. It helps in quickly identifying potential trading setups on the chart. Conclusion: We believe in providing user-friendly tools to help speed up traders technical analysis and implement easy trading strategies. The Strat with TFC & Combo Dashboard is a tool to assist traders in identifying potential trading setups based on The Strat methodology; to suit the users needs and trading style. RISK DISCLAIMER All content, tools, scripts & education provided by Gorb Algo LLC are for informational & educational purposes only. Trading is risk and most lose their money, past performance does not guarantee future results.
Pine Script® インジケーター
GorbAlgoの投稿
The Strat [LuxAlgo]The Strat indicator is a full toolkit regarding most of the concepts within "The Strat" methodology with features such as candle numbering, pivot machine gun (PMG) highlighting, custom combo highlighting, and various statistics included. Alerts are also included for the detection of specific candle numbers, custom combos, and PMGs. 🔶 SETTINGS Show Numbers on Chart: Shows candle numbering on the chart. Style Candles: Style candles based on the detected number. Only effective on non-line charts and if the script is brought to the front. 🔹 Custom Combo Search Combo: User defined combo to be searched by the script. Combos can be composed of any series of numbers including (1, 2, -2, 3), e.g : 2-21. No spaces or other characters should be used. 🔹 Pivot Machine Gun Show Labels: Highlight detected PMGs with a label. Min Sequence Length: Minimum sequence length of consecutive higher lows/lower highs required to detect a PMG. Min Breaks: Minimum amount of broken previous highs/lows required to detect a PMG. Show Levels: Show levels of the broken highs/lows. 🔹 Pivot Combos Pivot Lookback: Lookback period used for detecting pivot points. Right Bars Scan: Number of bars scanned to the right side of a detected pivot. Left Bars Scan: Number of bars scanned to the left side of a detected pivot. 🔹 Dashboard Show Dashboard: Displays statistics dashboard on chart. Numbers Counter: Displays the numbers counter section on the dashboard. Pivot Combos: Displays pivots combo section on the dashboard. %: Display the percentage of detected pivot combos on the dashboard instead of absolute numbers. Pivot Combos Rows: Number of rows displayed by the "Pivots Combo" dashboard section. Show MTF: Showa MTF candle numbering on the dashboard. Location: Location of the dashboard on the chart. Size: Size of the displayed dashboard. 🔶 USAGE This script allows users with an understanding of The Strat to quickly highlight elements such as candle numbers, pivot machine guns, and custom combos. The usage for these concepts is given in the sub-sections below. 🔹 Candle Numbers The Strat assigns a number to individual candles, this number is determined by the current candle position relative to the precedent candle, these include: Number 1 - Inside bar, occurs when the previous candle range engulfs the current one. Number 2 Up - Upside Directional Bar, occurs when the current price high breaks the previous high while the current low is lower than the previous high. Number 2 Down - Downside Directional Bar, occurs when the current price low breaks the previous low while the current high is higher than the previous low. Number 3 - Outside bar, occurs when the current candle range engulfs the previous one. The script can highlight the number of a candle by using labels but can also style candles by depending on the candle number. Inside bars (1) only have their candle wick highlighted, directional bars (2) (-2) only have their candle body highlighted. Outside bars have their candle range highlighted. Note that downside directional bars are highlighted with the number -2. Users can see the total amount of times a specific candle number is detected on the historical data on the dashboard available within the settings, as well as the number of times a candle number is detected relative to the total amount of detected candle numbers expressed as a percentage. It is also possible to see the current candle numbers returned by multiple timeframes on the dashboard. 🔹 Searching For Custom Combos Combos are made of a sequence of two or more candle numbers. These combos can highlight multiple reversals/continuation scenarios. Various common combos are documented by The Strat community. This script allows users to search for custom combos by entering them on the Combo user setting field. When a user combo is found, it is highlighted on the chart as a box highlighting the combo range. 🔹 Pivot Combos It can be of interest to a user to display the combo associated with a pivot high/low. This script will highlight the location of pivot points on the chart and display its associated combo by default. These are based on the Pivot Combo lookback and not displayed in real-time. Users can see on the dashboard the combos associated with a pivot high/low, these are ranked by frequency. 🔹 Pivot Machine Gun (PMG) Pivot Machine Guns (PMG)s describe the scenario where a single price variation breaks the value of multiple past successive higher lows/lower highs. This can highlight a self-exciting behavior, where even more past successive higher lows/lower highs get broken. Users can select the minimum sequence length of successive higher lows/lower highs required for a PMG to be detected, as well the amount of these successive higher lows/lower highs that must be broken.
Pine Script® インジケーター
LuxAlgoの投稿
30
GRIDBOT Scalper by nnamWhat is this Indicator used for? Made specifically for GRID Bots note: before continuing... this indicator works on any timeframe, but it WORKS BEST ON THE 15 MINUTE TIMEFRAME Straters and Forex Master Pattern Value Line Traders use this to help determine when the price could reverse. This indicator is a scalping indicator that produces signals when a "potential" reversal in price is indicated. When the price moves UP and a Potential Bearish Reversal Signal occurs, traders can use this signal as a potential SHORT entry signal for their Short Grid Bot. The process is the same in reverse. After a sustained move down, a Potential Bullish Signal can be used by the trader as a potential LONG entry signal for their GridBot. As shown in the screenshot below, lines develop on the chart (either RED or GREEN) indicating that a sustained move in one direction is currently occurring; however, there is no potential reversal signal plotted (this means that price action is currently moving in one direction only). As shown in the screenshot below, lines can be used as a stop-loss after entering the GRIDbot. (usually, by this time, the Grid Bot is in Profit as it usually moves in the opposite direction first) What this Indicator Does The GRIDBOT Scalper provides information regarding potential reversals in the market after a sustained movement in one direction (either Bullish or Bearish). The indicator is based on PRICE-ACTION ONLY and does not take into account the current state of the market (Bullish or Bearish). Once the price moves in a particular direction for at least 14 bars , a line appears as shown in a previous screenshot. Once the price stops moving in that direction and begins moving in the opposite direction - and after a sustained run - a "signal" appears alerting the trader that a "potential" reversal could be on the horizon soon. If price moves in one direction and plots both a line and a signal and then begins moving back in the other direction in a sustained manner, the original signal will remain even when a NEW line begins forming (the original line will disappear). (see below) This line will continue to move as the price continues to move. Not until a signal plots on the chart is the potential reversal forming. THE LINE DOES NOT SIGNAL A REVERSAL . Some traders, however, use this information to "ride the wave UP or DOWN" and exit their positions once the signal prints. As shown below, optional input settings allow the trader to set the line at CLOSE or HIGH/LOW of the candle preceding the potential reversal. It is suggested to use Close instead of High or Low but the setting allows one to use either. As shown in the screenshot below, it is typical on LOWER TIME FRAMES to see the price pass the signal line. The Indicator works best on the 15 minute timeframe, as it gives the trader time to make the decisions required as the volatility is less on the 15 minute chart vs the 1 minute or 5 minute charts. If you have any questions or suggestions for this indicator, please join our Discord. We offer free training on this Indicator on our Discord Server.
Pine Script® インジケーター
nnamdertの投稿
26
Simple STRAT Tool by nnamWhat this Indicator Does This indicator is a very simple tool created specifically for experienced Straters. It was created for those Straters who fully understand the 1-2-3 Strat Scenarios, are in need of an easy to use tool, and do not want or need a lot of messy markings on their chart. The indicator simply allows the user to color code the Strat 1, 2 ,3 (Inside /Outside /Up / Down) Bars as desired and by default extends lines to the right of the chart from the Highs and Lows of the previous 2 Bars giving the user a simple reference for Strat scenario structure breaks. As shown above, the bars are color coded, but the original bar color is maintained via the border and wick. If a bar is an Outside Bar or an Inside Bar, it is still easy to identify whether or not the bar was a Bullish or Bearish 1 or 3. The same goes for 2UP and 2Down Bars - It is easy to identify Bullish or Bearish UP or DOWN Bars. Optionally, as show in the screenshot below, the user can extend the lines in both directions to get an "at a glance" better understanding of where price is currently vs previous support and resistance areas. For Straters that prefer to trade only INSIDE BAR BREAKOUTS there is an optional input setting labeled "Trade Inside Bars ONLY". This setting turns OFF the lines that extend from the 2nd previous bar back and only displays and extend lines from the previous bar IF and ONLY IF the current bar is an INSIDE (one) bar. . The User Input settings allow for the following customizations: 1. Custom Outside Bar Color 2. Custom Inside Bar Color 3. Custom 2 Up Bar Color 4. Custom 2 Down Bar Color 5. Turn ON or OFF color coded bars 6. Trade only INSIDE Bar Breakouts 7. Extend Lines Both Directions 8. Hide all Lines The customizable settings above allow the user to hide all lines and turn OFF color coding without having to fully remove the indicator from the chart. This is convenient when the user has another indicator that uses color coded bars or the lines conflict with another indicator and they need to be temporarily disabled. If you have any questions regarding this indicator please let me know. If you have any suggestions for minor tweaks to the indicator do not hesitate to ask for them. I hope you enjoy this indicator and get some usefulness from it... HAPPY TRADING!!
Pine Script® インジケーター
nnamdertの投稿
8
ATRvsDTR + ADR Zone + SSS50%This Script is to be used for intra day as far as the adr zones. The adr zones are used as support and resistance but also can be used to determine whether the stock is breaking out or not. Also being that the adr zones are calculated using a 5 or 10 day period unless you change the settings, and are set when price opens. It does really help you know whether a stock is moving more than it does on average to me it just signifies its directional. So I added the atr vs dtr so you can see what a stock moves on average versus what it has moved today. The atr period is calculated based on the daily period unless you change the settings. I added to the original script 3 more percentages the atr vs dtr will change as it goes higher so that you can be aware when the stock is getting closer to moving 100% of its atr. Even though a stock breaks above or below the adr that doesn't mean it has moved more than it normally moves. I also have the weekly open on the script as I trade the strat and I want to know, at what price the the week will change from bearish to bullish and vice versa. So that I can understand the trend when I am trading intraday. The 50% lines were added for Sara strat snipers 50% rule and you can change the timeframes on them. This is used to know whether a candle will go 3. This also can help with retracements vs reversals, because in traditional technical analysis 50% is around where people start think its a reversal more so than a retracement. I believe the script will be very help as it can show you price being directional but can also let you know when the stock is getting close to moving more than it normally has or if it has moved more than it normally has. As well as being able to see if something is a retracement vs a reversal. I trade TheStrat strategy so this can be very helpful in that regard The 50% retracement levels are default 1h and daily. You can change them and whether or not they show In the example chart you can see we are below weekly open which is bearish and you can also see where price reverses out of the upper adr zone. As well as how much of the atr we have moved on this day in time.
Pine Script® インジケーター
thestratuchihaの投稿
11