DrawIndicatorOnTheChart

Library "DrawIndicatorOnTheChart"
this library is used to show an indicator (such RSI, CCI, MOM etc) on the main chart with indicator's horizontal lines in a window. Location of the window is calculated dynamically by last price movemements

drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

リリースノート

v2

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, windowLabel)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
windowLabel (string): is the label of the window
Returns: none

リリースノート

v5

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, padding)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
padding (float): is the padding in percentage between chart and indicator window
Returns: none

リリースノート

v6

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicator4, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, padding)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicator4 (float): is fourth indicator you want to show
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
padding (float): is the padding in percentage between chart and indicator window
Returns: none

リリースノート

v10

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

リリースノート

v11

リリースノート

v12

リリースノート

v13

リリースノート

v14

リリースノート

v15

リリースノート

v16

リリースノート

v17

リリースノート

v18

リリースノート

v19

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
Parameters:
enabled (bool)
indicatorName (string)
indicator1 (float)
indicator2 (float)
indicator3 (float)
indicatorcolors (array<color>)
period (int)
indimax_ (float)
indimin_ (float)
levels (array<float>)
precision (int)
xlocation (int)
lnwidth (int)

リリースノート

v20

リリースノート

v21

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

リリースノート

v22

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

リリースノート

v23

リリースノート

v24

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicatorcolor, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicatorcolor (color): is the color of indicator line
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

リリースノート

v25

リリースノート

v26

더해짐
findIndiLoc()

getIndiLevel(indi, indimax, indimin, top, bottom)
Parameters:
indi (float)
indimax (float)
indimin (float)
top (float)
bottom (float)

findLowestTimeframe(timeframes)
Parameters:
timeframes (array<int>)

findLabelIndex(timeframes, lowestTimeframe)
Parameters:
timeframes (array<int>)
lowestTimeframe (int)

drawMultipleIndicators(enabled, title, windowNumber, indicatorValues, timeframes, indicatorColors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
Parameters:
enabled (bool)
title (string)
windowNumber (int)
indicatorValues (array<float>)
timeframes (array<int>)
indicatorColors (array<color>)
period (int)
indimax_ (float)
indimin_ (float)
levels (array<float>)
precision (int)
xlocation (int)
lnwidth (int)

없어짐
drawIndicator(enabled, indicatorName, indicator1, indicatorcolor, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart

リリースノート

v27

없어짐
findIndiLoc()

リリースノート

v28

Pineライブラリ

TradingViewの精神に則り、作者はPineコードをオープンソースライブラリとして公開し、コミュニティ内の他のPineプログラマーが再利用できるようにしました。作者に敬意を表します！このライブラリを個人的に、または他のオープンソースの投稿で使用することができますが、このコードを投稿で再利用するには、ハウスルールに準拠する必要があります。

brasscoin

免責事項

これらの情報および投稿は、TradingViewが提供または保証する金融、投資、取引、またはその他の種類のアドバイスや推奨を意図したものではなく、またそのようなものでもありません。詳しくは利用規約をご覧ください。

Pineライブラリ

brasscoin