始めましょう

Support

A1TradeHub Toolkits [1.0]A1TradeHub Toolkits — Quick Guide ⏱️ Timeframe: 5M (SPY/QQQ/IWM) 📐 Core EMAs: 13 / 48 / 200 🟢 LONG signals ✅ Confirm 2+ supports: Orange Zone, EMA200, PDH/PDL, PWH/PWL ✅ Get 3+ patterns: Bull Flag, Trendline Support, Double Bottoms, Support Pivots, White candles uptrend ▶️ Entry: Break & retest (PMH/PDH or trendline) with Oscillator → bullish 🎯 Targets: Next resistance zones; trail 13 EMA 💾 Scale out: +40–60%, let runners push to key level 🔴 SHORT signals ✅ Confirm 2+ resistances: Orange Zone, EMA200, PDH/PDL, PWH/PWL ✅ Get 3+ patterns: Bear Flag, Trendline Resistance, Double Tops, Resistance Pivots, White candles downtrend ▶️ Entry: Break & retest (PML/PDL or trendline) with Oscillator → bearish 🎯 Targets: Next support zones; trail 13 EMA 💾 Scale out: +40–60%, ride to next demand 🟧 Support Area (buy bias) Use PWL / PDL / EMA48 or 200 / Orange Zone Bounce = calls; break→retest = puts 🟥 Resistance Area (sell bias) Use PWH / PDH / EMA48 or 200 / Supply zones Reject = puts; break→retest = calls 📊 And more indicator comming...soon
Pine Script® ストラテジー
A1TradingHubの投稿
Dynamic Support and Resistance Pivot Strategy The Dynamic Support and Resistance Pivot Strategy is a flexible and adaptive tool designed to identify short-term support and resistance levels using the concept of price pivots. ### Key Elements of the Strategy 1. Pivot points as support and resistance levels Pivots are significant turning points on the price chart, often marking local highs and lows where the price has reversed direction. A pivot high occurs when the price forms a local peak, while a pivot low occurs when the price forms a local trough. When a new pivot high is formed, it creates a resistance level. Conversely, when a new pivot low is formed, it creates a support level. The strategy continuously updates these levels as new pivots are detected, ensuring they remain relevant to the current market conditions. By identifying these price levels, the strategy dynamically adjusts to market conditions, allowing it to adapt to both trending and ranging markets, since it has a long target and can perform reversal operations. 2. Entry Criteria - Buy (Long): A long position is triggered when the price is near the support level and then crosses it from below to above. This suggests that the price has found support and may start moving upwards. - Sell (Short): A short position is triggered when the price is near the resistance level and then crosses it from above to below. This indicates that the price may be reversing and moving downward. 3. Support/Resistance distance (%) - This parameter establishes a percentage range around the identified support and resistance level. For example, if the Support Resistance Distance is 0.4% (default), the closing price must be within a range of 0.4% above support or below the resistance to be considered "close" and trigger a trade. 4. Exit criteria - Take profit = 27 % - Stop loss = 10 % - Reversal if a new entry point is identified in the opposite direction 5. No Repainting - The Dynamic Support and Resistance Pivot Strategy is not subject to repainting. 6. Position Sizing by Equity and risk management - This strategy has a default configuration to operate with 35% of the equity. The stop loss is set to 10% from the entry price. This way, the strategy is putting at risk about 10% of 35% of equity, that is, around 3.5% of equity for each trade. The percentage of equity and stop loss can be adjusted by the user according to their risk management. 7. Backtest results - This strategy was subjected to backtest and operations in replay mode on **1000000MOGUSDT.P**, with the inclusion of transaction fees at 0.12% and slipagge of 5 ticks, and the past results have shown consistent profitability. Past results are no guarantee of future results. The strategy's backtest results may even be due to overfitting with past data. 8. Chart Visualization - Support and resistance levels are displayed as green (support) and red (resistance) lines. - Pivot prices are displayed as green (pivot low) and red (pivot high) labels. In this image above, the Support/Resistance distance (%) parameter was set to 0.8. 9. Default Configuration Chart Timeframe: 1h Pivot Lengh: 2 Support/Resistance distance (%): 0.4* Stop Loss: 10 % Take Profit: 27 % * This parameter can alternatively be set to 0.8. 10. Alternative Configuration Chart Timeframe: 20 min Pivot Lengh: 4 Support/Resistance distance (%): 0.1 Stop Loss: 10 % Take Profit: 25 % BYBIT:1000000MOGUSDT.P
Pine Script® ストラテジー
felipemiransanの投稿
4
Price Action StrategyThe **Price Action Strategy** is a tool designed to capture potential market reversals by utilizing classic reversal candlestick patterns such as Hammer, Shooting Star, Doji, and Pin Bar near dinamic support and resistance levels. ***Note to moderators - The moving average was removed from the strategy because it was not suitable for the strategy and not participating in the entry or exit criteria. - The moving average length has been replaced/renamed by the support/resistance lenght. - The bullish engulfing and bearish engulfing patterns were also removed because in practice they were not working as entry criteria, since the candle price invariably closes far from the support/resistance level even considering the sensitivity range. There was no change in the backtest results after removing these patterns. ### Key Elements of the Strategy 1. Support and Resistance Levels - Support and resistance are pivotal price levels where the asset has previously struggled to move lower (support) or higher (resistance). These levels act as psychological barriers where buying interest (at support) or selling interest (at resistance) often increases, potentially causing price reversals. - In this strategy, support is calculated as the lowest low and resistance as the highest high over a 16-period length. When the price nears these levels, it indicates possible zones for a reversal, and the strategy looks for specific candlestick patterns to confirm an entry. 2. Candlestick Patterns - This strategy uses classic reversal patterns, including: - **Hammer**: Indicates a buy signal, suggesting rejection of lower prices. - **Shooting Star**: Suggests a sell signal, showing rejection of higher prices. - **Doji**: Reflects indecision and potential reversal. - **Pin Bar**: Represents price rejection with a long shadow, often signaling a reversal. By combining these reversal patterns with the proximity to dinamic support or resistance levels, the strategy aims to capture potential reversal movements. 3. Sensitivity Level - The sensitivity parameter adjusts the acceptable range (Default 0.018 = 1.8%) around support and resistance levels within which reversal patterns can trigger trades (i.e. the closing price of the candle must occur within the specified range defined by the sensitivity parameter). A higher sensitivity value expands this range, potentially leading to less accurate signals, as it may allow for more false positives. 4. Entry Criteria - **Buy (Long)**: A Hammer, Doji, or Pin Bar pattern near support. - **Sell (Short)**: A Shooting Star, Doji, or Pin Bar near resistance. 5. Exit criteria - Take profit = 9.5% - Stop loss = 16% 6. No Repainting - The Price Action Strategy is not subject to repainting. 7. Position Sizing by Equity and risk management - This strategy has a default configuration to operate with 35% of the equity. The stop loss is set to 16% from the entry price. This way, the strategy is putting at risk about 16% of 35% of equity, that is, around 5.6% of equity for each trade. The percentage of equity and stop loss can be adjusted by the user according to their risk management. 8. Backtest results - This strategy was subjected to deep backtest and operations in replay mode on **1000000MOGUSDT.P**, with the inclusion of transaction fees at 0.12% and slipagge of 5 ticks, and the past results have shown consistent profitability. Past results are no guarantee of future results. The strategy's backtest results may even be due to overfitting with past data. 9. Chart Visualization - Support and resistance levels are displayed as green (support) and red (resistance) lines. - Only the candlestick pattern that generated the entry signal to triger the trade is identified and labeled on the chart. During the operation, the occurrence of new Doji, Pin Bar, Hammer and Shooting Star patterns will not be demonstrated on the chart, since the exit criteria are based on percentage take profit and stop loss. Doji: Pin Bar and Doji Shooting Star and Doji Hammer 10. Default settings Chart timeframe: 20 min Moving average lenght: 16 Sensitivity: 0.018 Stop loss (%): 16 Take Profit (%): 9.5 BYBIT:1000000MOGUSDT.P
Pine Script® ストラテジー
felipemiransanの投稿
7
RunRox - Backtesting System (ASMC)Introducing RunRox - Backtesting System (ASMC), a specially designed backtesting system built on the robust structure of our Advanced SMC indicator. This innovative tool evaluates various Smart Money Concept (SMC) trading setups and serves as an automatic optimizer, displaying which entry and exit points have historically shown the best results. With cutting-edge technology, RunRox - Backtesting System (ASMC) provides you with effective strategies, maximizing your trading potential and taking your trading to the next level 🟠 HOW OUR BACKTESTING SYSTEM WORKS Our backtesting system for the Advanced SMC (ASMC) indicator is meticulously designed to provide traders with a thorough analysis of their Smart Money Concept (SMC) strategies. Here’s an overview of how it works: 🔸 Advanced SMC Structure Our ASMC indicator is built upon an enhanced SMC structure that integrates the Institutional Distribution Model (IDM), precise retracements, and five types of order blocks (CHoCH OB, IDM OB, Local OB, BOS OB, Extreme OB). These components allow for a detailed understanding of market dynamics and the identification of key trading opportunities. 🔸 Data Integration and Analysis 1. Historical Data Testing: Our system tests various entry and exit points using historical market data. The ASMC indicator is used to simulate trades based on predefined SMC setups, evaluating their effectiveness over a specified time period. Traders can select different parameters such as entry points, stop-loss, and take-profit levels to see how these setups would have performed historically. 2. Entry and Exit Events: The backtester can simulate trades based on 12 different entry events, 14 target events, and 14 stop-loss events, providing a comprehensive testing framework. It allows for testing with multiple combinations of entry and exit strategies, ensuring a robust evaluation of trading setups. 3. Order Block Sensitivity: The system uses the sensitivity settings from the ASMC indicator to determine the most relevant order blocks and fair value gaps (FVGs) for entry and exit points. It distinguishes between different types of order blocks, helping traders identify strong institutional zones versus local zones. 🔸 Optimization Capabilities 1. Auto-Optimizer: The backtester includes an auto-optimizer feature that evaluates various setups to find those with the best historical performance. It automatically adjusts parameters to identify the most effective strategies for both trend-following and counter-trend trading. 2. Stop Loss and Take Profit Optimization: It optimizes stop-loss and take-profit levels by testing different settings and identifying those that provided the best historical results. This helps traders refine their risk management and maximize potential returns. 3. Trailing Stop Optimization: The system also optimizes trailing stops, ensuring that traders can maximize their profits by adjusting their stops dynamically as the market moves. 🔸 Comprehensive Reporting 1. Performance Metrics: The backtesting system provides detailed reports, including key performance metrics such as Net Profit, Win Rate, Profit Factor, and Max Drawdown. These metrics help traders understand the historical performance of their strategies and make data-driven decisions. 2. Flexible Settings: Traders can adjust initial balance, commission rates, and risk per trade settings to simulate real-world trading conditions. The system supports testing with different leverage settings, allowing for realistic assessments even with tight stop-loss levels. 🔸 Conclusion The RunRox Backtesting System (ASMC) is a powerful tool for traders seeking to validate and optimize their SMC strategies. By leveraging historical data and sophisticated optimization algorithms, it provides insights into the most effective setups, enhancing trading performance and decision-making. 🟠 HERE ARE THE AVAILABLE FEATURES Historical backtesting for any setup – Select any entry point, exit point, and various stop-loss options to see the results of your setup on historical data. Auto-optimizer for finding the best setups – The indicator displays settings that have shown the best results historically, providing valuable insights. Auto-optimizer for counter-trend setups – Discover entry and exit points for counter-trend trading based on historical performance. Auto-optimizer for stop-loss – The indicator shows stop-loss points that have been most effective historically. Auto-optimizer for take-profit – The indicator identifies take-profit points that have performed well in historical trading data. Auto-optimizer for trailing stop – The indicator presents trailing stop settings that have shown the best historical results. And much more within our indicator, all of which we will cover in this post. Next, we will showcase the possible entry points, targets, and stop-loss options available for testing your strategies 🟠 ENTRY SETTINGS 12 Event Triggers for Trade Entry Extr. ChoCh OB Extr. ChoCh FVG ChoCh ChoCh OB ChoCh FVG IDM OB IDM FVG BoS FVG BoS OB BoS Extr. BoS FVG Extr. BoS OB 3 Trade Direction Options Long Only: Enter long positions only Short Only: Enter short positions only Long and Short: Enter both long and short positions based on trend 3 Levels for Order Block/FVG Entries Beginning: Enter the trade at the first touch of the Order Block/FVG Middle: Enter the trade when the middle of the Order Block/FVG is reached End: Enter the trade upon full filling of the Order Block/FVG *Three levels work only for Order Blocks and FVG. For trade entries based on BOS or CHoCH, these settings do not apply as these parameters are not available for these types of entries You can choose any combination of trade entries imaginable. 🟠 TARGET SETTINGS 14 Target Events, Including Fixed % and Fixed RR (Risk/Reward): Fixed - % change in price Fixed RR - Risk Reward per trade Extr. ChoCh OB Extr. ChoCh FVG ChoCh ChoCh OB ChoCh FVG IDM OB IDM FVG BoS FVG BoS OB BoS Extr. BoS FVG Extr. BoS OB 3 Levels of Order Block/FVG for Target Beginning: Close the trade at the first touch of your target. Middle: Close the trade at the midpoint of your chosen target. End: Close the trade when your target is fully filled. Customizable Parameters Easily set your Fixed % and Fixed RR targets with a user-friendly input field. This field works only for the Fixed and Fixed RR entry parameters. When selecting a different entry point, this field is ignored Choose any combination of target events to suit your trading strategy. 🟠 STOPLOSS SETTINGS 14 Possible StopLoss Events Including Entry Orderblock/FVG Fixed - Fix the loss on the trade when the price moves by N% Entry Block Extr. ChoCh OB Extr. ChoCh FVG ChoCh ChoCh OB ChoCh FVG IDM OB IDM FVG BoS FVG BoS OB BoS Extr. BoS FVG Extr. BoS OB 3 Levels for Order Blocks/FVG Exits Beginning: Exit the trade at the first touch of the order block/FVG. Middle: Exit the trade at the middle of the order block/FVG. End: Exit the trade at the full completion of the order block/FVG. Dedicated Field for Setting Fixed % Value Set a fixed % value in a dedicated field for the Fixed parameter. This field works only for the Fixed parameter. When selecting other exit parameters, this field is ignored. 🟠 ADDITIONAL SETTINGS Trailing Stop, % Set a Trailing Stop as a percentage of your trade to potentially increase profit based on historical data. Move SL to Breakeven, bars Move your StopLoss to breakeven after exiting the entry zone for a specified number of bars. This can enhance your potential WinRate based on historical performance. Skip trade if RR less than This feature allows you to skip trades where the potential Risk-to-Reward ratio is less than the number set in this field. 🟠 EXAMPLE OF MANUAL SETUP For example, let me show you how it works on the chart. You select entry parameters, stop loss parameters, and take profit parameters for your trades, and the strategy automatically tests this setup on historical data, allowing you to see the results of this strategy. In the screenshot above, the parameters were as follows: Trade Entry: CHoCH OB (Beginning) Stop Loss: Entry Block Take Profit: Break of BOS The indicator will automatically test all possible trades on the chart and display the results for this setup. 🟠 AUTO OPTIMIZATION SETTINGS In the screenshot above, you can see the optimization table displaying various entry points, exits, and stop-loss settings, along with their historical performance results and other parameters. This feature allows you to identify trading setups that have shown the best historical outcomes. This functionality will enhance your trading approach, providing you with valuable insights based on historical data. You’ll be aware of the Smart Money Concept settings that have historically worked best for any specific chart and timeframe. Our indicator includes various optimization options designed to help you find the most effective settings based on historical data. There are 5 optimization modes, each offering unique benefits for every trader Trend Entry - Optimization of the best settings for trend-following trades. The strategy will enter trades only in the direction of the trend. If the trend is upward, it will look for long entry points and vice versa. Counter Trend Entry - Finding setups against the trend. If the trend is upward, the script will search for short entry points. This is the opposite of trend entry optimization. Stop Loss - Identifying stop-loss points that showed the best historical performance for the specific setup you have configured. This helps in finding effective exit points to minimize losses. Take Profit - Determining targets for the configured setup based on historical performance, helping to identify potentially profitable take profit levels. Trailing Stop - Finding optimal percentages for the trailing stop function based on historical data, which can potentially increase the profit of your trades. Ability to set parameters for auto-optimization within a specified range. For example, if you choose FixRR TP from 1 to 10, the indicator will automatically test all possible Risk Reward Take Profit variations from 1 to 10 and display the results for each parameter individually. Ability to set initial deposit parameters, position commissions, and risk per trade as a fixed percentage or fixed amount. Additionally, you can set the maximum leverage for a trade. There are times when the stop loss is very close to the entry point, and adhering to the risk per trade values set in the settings may not allow for such a loss in any situation. That’s why we added the ability to set the maximum possible leverage, allowing you to test your trading strategy even with very tight stop losses. Duplicated Smart Money Structure settings from our Advanced SMC indicator that you can adjust to match your trading style flexibly. All these settings will be taken into account during the optimization process or when manually calculating settings. Additionally, you can test your strategy based on higher timeframe order blocks. For example, you can test a strategy on a 1-minute chart while displaying order blocks from a 15-minute timeframe. The auto-optimizer will consider all these parameters, including higher timeframe order blocks, and will enter trades based on these order blocks. Highly flexible dashboard and results optimization settings allow you to display the tables you need and sort results by six different criteria: Profit Factor, Profit, Winrate, Max Drawdown, Wins, and Trades. This enables you to find the exact setup you desire, based on these comprehensive data points. 🟠 ALERT CUSTOMIZATION With this indicator, you can set up buy and sell alerts based on the test results, allowing you to create a comprehensive trading strategy. This feature enables you to receive real-time signals, making it a powerful tool for implementing your trading strategies. 🟠 STRATEGY PROPERTIES For backtesting, we used realistic initial data for entering trades, such as: Starting balance: $1000 Commission: 0.01% Risk per trade: 1% To ensure realistic data, we used the above settings. We offer two methods for calculating your order size, and in our case, we used a 1% risk per trade. Here’s what it means: Risk per trade: This is the maximum loss from your deposit if the trade goes against you. The trade volume can change depending on your stop-loss distance from the entry point. Here’s the formula we use to calculate the possible volume for a single trade: 1. quantity = percentage_risk * balance / loss_per_1_contract (incl. fee) Then, we calculate the maximum allowed volume based on the specified maximum leverage: 2. max_quantity = maxLeverage * balance / entry_price 3. If quantity < max_quantity, meaning the leverage is less than the maximum allowed, we keep quantity. If quantity > max_quantity, we use max_quantity (the maximum allowed volume according to the set leverage). This way, depending on the stop-loss distance, the position size can vary and be up to 100% of your deposit, but the loss in each trade will not exceed the set percentage, which in our case is 1% for this backtest. This is a standard risk calculation method based on your stop-loss distance. 🔸 Statistical Significance of Trade Data In our strategy, you may notice there weren’t enough trades to form statistically significant data. This is inherent to the Smart Money Concept (SMC) strategy, where the focus is not on the number of trades but rather on the risk-to-reward ratio per trade. In SMC strategies, it’s crucial to avoid taking numerous uncertain setups and instead perform a comprehensive analysis of the market situation. Therefore, our strategy results show fewer than 100 trades. It’s important to understand that this small sample size isn’t statistically significant and shouldn’t be relied upon for strategy analysis. Backtesting with a small number of trades should not be used to draw conclusions about the effectiveness of a strategy. 🔸 Versatile Use Cases The methods of using this indicator are numerous, ranging from identifying potentially the best-performing order blocks on the chart to creating a comprehensive trading strategy based on the data provided by our indicator. We believe that every trader will find a valuable application for this tool, enhancing their entry and exit points in trades. Disclaimer Past performance is not indicative of future results. The results shown by this indicator do not guarantee similar outcomes in the future. Use this tool as part of a comprehensive trading strategy, considering all market conditions and risks. How to access For access to this indicator, please read the author’s instructions below this post
Pine Script® ストラテジー
RunRoxの投稿
6
Ichimoku Clouds Strategy Long and ShortOverview: The Ichimoku Clouds Strategy leverages the Ichimoku Kinko Hyo technique to offer traders a range of innovative features, enhancing market analysis and trading efficiency. This strategy is distinct in its combination of standard methodology and advanced customization, making it suitable for both novice and experienced traders. Unique Features: Enhanced Interpretation: The strategy introduces weak, neutral, and strong bullish/bearish signals, enabling detailed interpretation of the Ichimoku cloud and direct chart plotting. Configurable Trading Periods: Users can tailor the strategy to specific market windows, adapting to different market conditions. Dual Trading Modes: Long and Short modes are available, allowing alignment with market trends. Flexible Risk Management: Offers three styles in each mode, combining fixed risk management with dynamic indicator states for versatile trade management. Indicator Line Plotting: Enables plotting of Ichimoku indicator lines on the chart for visual decision-making support. Methodology: The strategy utilizes the standard Ichimoku Kinko Hyo model, interpreting indicator values with settings adjustable through a user-friendly menu. This approach is enhanced by TradingView's built-in strategy tester for customization and market selection. Risk Management: Our approach to risk management is dynamic and indicator-centric. With data from the last year, we focus on dynamic indicator states interpretations to mitigate manual setting causing human factor biases. Users still have the option to set a fixed stop loss and/or take profit per position using the corresponding parameters in settings, aligning with their risk tolerance. Backtest Results: Operating window: Date range of backtests is 2023.01.01 - 2024.01.04. It is chosen to let the strategy to close all opened positions. Commission and Slippage: Includes a standard Binance commission of 0.1% and accounts for possible slippage over 5 ticks. Maximum Single Position Loss: -6.29% Maximum Single Profit: 22.32% Net Profit: +10 901.95 USDT (+109.02%) Total Trades: 119 (51.26% profitability) Profit Factor: 1.775 Maximum Accumulated Loss: 4 185.37 USDT (-22.87%) Average Profit per Trade: 91.67 USDT (+0.7%) Average Trade Duration: 56 hours These results are obtained with realistic parameters representing trading conditions observed at major exchanges such as Binance and with realistic trading portfolio usage parameters. Backtest is calculated using deep backtest option in TradingView built-in strategy tester How to Use: Add the script to favorites for easy access. Apply to the desired chart and timeframe (optimal performance observed on the 1H chart, ForEx or cryptocurrency top-10 coins with quote asset USDT). Configure settings using the dropdown choice list in the built-in menu. Set up alerts to automate strategy positions through web hook with the text: {{strategy.order.alert_message}} Disclaimer: Educational and informational tool reflecting Skyrex commitment to informed trading. Past performance does not guarantee future results. Test strategies in a simulated environment before live implementation
Pine Script® ストラテジー
Skyrexioの投稿
Swing Breaker Strategy [v0.1] - Support and resistance breakoutSwing Breaker Strategy - Support and Resistance Breakouts This strategy has no repainting. Default settings: Swing Barsback: 10 Number of Swings: 3 Stoploss Candles Lookback: 5 Why these default settings? This strategy has been backtested with over 100 trades, and on a larger scale of 1000 trades, it has reported a 1.33 profit factor with a maximum 5% cumulative drawdown, using no leverage. In this backtest, the settings (10,3,5) were used, becoming the default settings as they are more adaptable to different market conditions. How does this strategy work? Defining swing lows (support) and swing highs (resistance): We can locate these candles by looking at a symmetrical candle unit around them. For example, the default settings present a 10 swing bars back, which means there is no superior level within a 10-candle radius in the case of a swing high, and the opposite for a swing low. Swings are located a few candles after, just the number of swing bars back (width), because it is needed to ensure it is a swing. Locating trends: We locate trends by looking at consecutive swings. For example, in the default settings, to determine a bullish trend, we need 3 consecutive ascending swing lows; for a bearish trend, 3 consecutive descending swing highs. You can find this parameter in settings as "Number of swings." When a trend is formed, a stop entry is placed at the last swing until it is broken. Just after the entry, the stop is placed at the lowest (in the case of a long) or the highest (in the case of a short) of the last candles. You can define that number in the settings as "Stoploss candles lookback," which default is 5. The take profit is placed at 2 times the stop value, resulting in a 2 risk-reward ratio. Why is this strategy protected? No other strategy combines the way of locating swings and turning it into a strategy, including customizable parameters such as stop loss, swing width and introducing the number of swings. That's why we decided to protect it.
Pine Script® ストラテジー
statix_strategiesの投稿
4
Ta StrategyHello guys This script follows traditional technical indicators MACD, ADX, RSI and pivot points If the price is above the resistance and the MACD has crossover ,and the RSI 14 is above 50 ADX is higher than 20, and DI+ is higher than DI-. This is a buy signal and vice versa for a sell signal The script moves the stop loss to the entry price after the first target is reached You can specify the quantity you want to sell when the price reaches the first target There are also options like if you want the script to entry long or short, or both you can reverse the strategy if it does not work well If you want to inquire about any details, please let me know in the comments
Pine Script® ストラテジー
AHMEDABDELAZIZZIZOの投稿
1
Price Action - Support & Resistance + MACD LONG StrategyUsing "Price Action - Support & Resistance by DGT" and the MACD (Moving Average Convergence Divergence) indicator in TradingView can help develop a trade strategy. Here's a step-by-step approach you can follow: 1. Identifying Support and Resistance Levels: Apply the "Price Action - Support & Resistance by DGT" indicator to your chart. This indicator helps you identify key support and resistance levels based on price action. These levels act as potential areas where the price may reverse or consolidate. 2. Confirming Support and Resistance Levels: Once the indicator has plotted support and resistance levels on your chart, analyze the historical price action around these levels. Look for multiple touches or bounces from the same level, which adds strength to the support or resistance zone. 3. Analyzing the MACD Indicator: Add the MACD indicator to your chart. The MACD consists of two lines: the MACD line and the signal line, along with a histogram representing the difference between the two lines. The MACD helps identify momentum and potential trend reversals. When the MACD line crosses above the signal line and the histogram turns positive, it suggests bullish momentum. 4. Identifying Trade Opportunities: Bullish Trade: Look for a bullish setup when the price approaches a strong support level identified by the "Price Action - Support & Resistance by DGT" indicator. Wait for the MACD lines to cross above the signal line and the histogram to turn positive, indicating bullish momentum. Enter a long position with a stop loss below the support level. Managing the Trade: Once you enter a trade, consider setting a target based on the distance between your entry point and the nearest significant support or resistance level. You can also use trailing stop losses or other risk management techniques to protect your profits and limit potential losses. Remember that no trading strategy is guaranteed to be successful, and it's important to practice proper risk management and conduct thorough analysis before making any trading decisions. Additionally, it's recommended to backtest and demo trade this strategy before using it with real money.
Pine Script® ストラテジー
harveylam814の投稿
1
Alex trading stragedyOverview This script, named "ALEX TRADING STRATEGY", is a technical trading strategy designed for new investing groups. It uses a combination of various technical indicators to identify potential buying and selling opportunities in the market. The script includes the Relative Strength Index (RSI), Simple Moving Averages (SMA), Exponential Moving Averages (EMA), and Higher High Lower Low (HHLL) strategies to create a complete trading solution. The user can change the position from long to short in the Input Settings. The script uses bar colors to indicate the current trading position. The script also has exit strategies to help manage the open trades. The user can also set the period for the various indicators used in the strategy. The script provides various technical indicators and entry/exit signals to make the trading decision easier for the user. It also includes pivot lines, resistance and support levels to help the user make a more informed decision. This Pine script implements a multi-indicator trading strategy that combines several technical analysis techniques for making trading decisions. The script uses the Relative Strength Index (RSI) to determine overbought and oversold conditions in the market and plots the RSI values on the chart. The RSI values above 70 are considered overbought and plotted as red upward triangles, while the RSI values below 30 are considered oversold and plotted as green downward triangles. The script also calculates Simple Moving Averages (SMAs) with the user-defined period and plots them along with the Exponential Moving Averages (EMAs) of 20, 50, and 100 periods. Based on the crossover of the close price and the moving averages, the script enters long or short trades. The script sets the trade exit conditions as the low or high crossing the lower or upper band, respectively. In addition to the moving average crossover, the script uses the highest high and lowest low over a user-defined period to determine long and short entries. The script plots the long and short conditions on the chart as green upward and red downward triangles, respectively. The script allows the user to switch between long and short trades by changing the input settings. Finally, the script changes the bar colors based on the trade direction, with green bars indicating a long trade, red bars indicating a short trade, and blue bars indicating no trade. Overall, this Pine script provides a comprehensive trading strategy that combines several technical analysis techniques to make informed trading decisions. HOW TO USE Input Settings: In the Input Settings section, you can change the long to short position. You can also change the period value (default is 10) used to calculate the Simple Moving Average (SMA) for the Keltner channel. Indicators: The script uses RSI (Relative Strength Index) with 14 periods as well as multiple EMAs (Exponential Moving Averages) with periods 20, 50, and 100 to help in making trading decisions. Entry Signals: The script uses two main entry signals: (1) Keltner Channel and (2) HHLL (High-Low). When the closing price crosses above the upper band of the Keltner channel, the script generates a long signal, and when the closing price crosses below the lower band of the Keltner channel, the script generates a short signal. The HHLL strategy generates a long signal when the current high crosses above the highest high of the last "nPeriod" bars, and generates a short signal when the current low crosses below the lowest low of the last "nPeriod" bars. Exit Signals: The script uses two exit signals: (1) Stop Loss based on Keltner channel and (2) Profit Target based on Keltner channel. The script exits the long position when the closing price crosses below the lower band of the Keltner channel, and the script exits the short position when the closing price crosses above the upper band of the Keltner channel. To use this script, you will need to have access to a trading platform that supports PineScript, such as TradingView, and attach the script to a chart. The script will then automatically generate entry and exit signals based on the rules described above. It's important to note that this script is just a tool and not a guarantee of profit. As with any trading strategy, it's important to thoroughly test and understand the script before using it for live trading.
Pine Script® ストラテジー
Alex_le_Grandの投稿
1
MACD with Support and Resistance - Signals, Alerts, TP and SLMACD with Support and Resistance - Signals Alerts SL and TP by Tech Store On The script uses MACD for entering/exiting trades and support/resistance lines to take TP1 (take profit 1). Both MACD and support/resistance lines are fully configurable to your preference, and you can back-test it via TradingView. Once TP1 is taken, you can either set the indicator to close the trade at the end of the US trading session day (4PM ET) or you can continue taking partial profits where you wish or just wait until reversal signal alert. For example: If you will be day trading SPY and you wish to close your positions no matter what right before the market closes (3:45PM ET > 15min before closes): Make sure to checkbox “Intraday – Close Position Before Market Closes” in the strategy/indicator Settings, so that you are alerted soon before the market closes, if you wish to continue holding the position – leave this checkbox unchecked. SL: SL is set to be slightly above/below the MACD signal candle, which is best suited for this strategy from manual backtesting. Strategy Take Profit Approach While the initial position open and SL hit is always based on a closed candle bar (can’t do otherwise, as otherwise you will have 10s of fake signal alerts), there are 2 ways on trading this strategy in terms of TP1 / TP1 taken > back to Entry, which is based off Alert type. You can switch this as you like within the indicator settings, “Checked: TP1/TP1 taken > back to Entry per Price Touch | Unchecked: per Candle Close”. Candle Close vs Price Touch: with the Default method - Candle Close for an alert for TP1 or if price comes back to Entry after TP1 is taken will only be triggered once candle bar fully closes crossing the area, while Price Touch will alert when price touches the area before candle bar closes. For example: your trade is running well, you grab TP1 and the price reverses and hits your trade Entry area. With Price Touch – you are immediately alerted to close your trade with no loss and with TP1 profit. With Candle Close - you will receive an alert only once candle bar fully closes on top of the Entry crossing it backwards, meaning it may lower your TP1 profit or even completely reverse the trade into loss in case it will be a huge candle bar for any reason. However, it may touch the Entry area, looking like the price is reversing, but then continue per initial trade direction, sometimes becoming a trend. So, while Price Touch seem like a more conservative approach, Candle Close can give you much bigger profits if you catch a trend, but you can always change it via the Settings. Note: TradingView back-testing engine does not have a feature to open/close orders IMMEDIATELY via Price Touch trigger, but only when the candle closes after price touches the scripted area/line/etc., so you for the most accurate results, test your strategy out via Candle Close setting. Otherwise, decide yourself. I personally like more Candle Close since I can test it out via back-testing with the most accurate results. Note: If you will be observing the strategy LIVE, during LIVE candle bar movement – it will look weird, like it’s placing an order after order during any trigger – this seem like a TradingView bug, but is only observational, once the candle bar is closed and you refresh TradingView it will all look correct. Back-Testing If you wish to do some back-testing, just modify the strategy/indicator Settings: -----1) STRATEGY: This is for back-testing/experimenting with the script inputs. ----------a. You can setup a start date (date, month, year) from which it will start opening back-test trades, select a position size and select TP1 size, the idea here is to close half (or whatever you choose) portion of the trade once you hit your TP1, then to either close at small profit or to catch a trend and close the second portion of the position long way ahead from Entry, otherwise it will alert you to close the position if price comes back to Entry, at reversal signal or at the end of US trading session if the option for it is checked. If you wish to close the whole position at TP1, just enter the same amount for TP1 to match backtest position size. Otherwise you can experiment with TP1 sizing – try it out! -----2) Feel free to experiment with MACD settings and with S&R Left/Right bars, you may be amazed how results will differ and find some really cool combinations! -----3) Make sure you select/de-select “Intraday – Close Position Before Market Closes” setting depending on what you are back-testing and on which conditions -----4) Note: If you wish to do some deep back-testing (1+ years), use the “Deep Backtesting” feature within Strategy Tester on the TradingView as otherwise it may show wrong results or even fail to compute the results Add the alerts -----Right-click anywhere on the TradingView chart -----Click on Add alert -----Condition: MACD with Support and Resistance - Signals ----------o Right underneath the condition click on the drop-down menu and select “alert() function calls only” -----Expiration time: Whatever you wish -----Alert actions: Whatever notifications you wish -----Alert name: DO NOT TOUCH THIS -----Hit “Create” -----Note: If you change ANY Settings within the indicator – you must DELETE the current alert and create a new one per steps above, otherwise it will continue triggering alerts per old Settings! - Note: If you add the alert while the script is currently “In Position” it will not know that. So either wait when there will be no position open at all or close your position partially if the bot opens it twice bigger or so in case per script the bot will think it is already in position. Note: Because of the slippage and the order processing time between TradingView, AutoView and the Broker (it’s usually about a second or so), it is suggested to not use a timeframe lower than 1min. The script is working really well with 15M/H1 timeframes per my back-testing, but feel free to explore via Strategy Back-testing what’s best for the instrument you wish to trade.
Pine Script® ストラテジー
tso_tradeの投稿
1
(IK) Base Break BuyThis strategy first calculates areas of support (bases), and then enters trades if that support is broken. The idea is to profit off of retracement. Dollar-cost-averaging safety orders are key here. This strategy takes into account a .1% commission, and tests are done with an initial capital of 100.00 USD. This only goes long. The strategy is highly customizable. I've set the default values to suit ETH/USD 15m. If you're trading this on another ticker or timeframe, make sure to play around with the settings. There is an explanation of each input in the script comments. I found this to be profitable across most 'common sense' values for settings, but tweaking led to some pretty promising results. I leaned more towards high risk/high trade volume. Always remember though: historical performance is no guarantee of future behavior . Keep settings within your personal risk tolerance, even if it promises better profit. Anyone can write a 100% profitable script if they assume price always eventually goes up. Check the script comments for more details, but, briefly, you can customize: -How many bases to keep track of at once -How those bases are calculated -What defines a 'base break' -Order amounts -Safety order count -Stop loss Here's the basic algorithm: -Identify support. --Have previous candles found bottoms in the same area of the current candle bottom? --Is this support unique enough from other areas of support? -Determine if support is broken. --Has the price crossed under support quickly and with certainty? -Enter trade with a percentage of initial capital. -Execute safety orders if price continues to drop. -Exit trade at profit target or stop loss. Take profit is dynamic and calculated on order entry. The bigger the 'break', the higher your take profit percentage. This target percentage is based on average position size, so as safety orders are filled, and average position size comes down, the target profit becomes easier to reach. Stop loss can be calculated one of two ways, either a static level based on initial entry, or a dynamic level based on average position size. If you use the latter (default), be aware, your real losses will be greater than your stated stop loss percentage . For example: -stop loss = 15%, capital = 100.00, safety order threshold = 10% -you buy $50 worth of shares at $1 - price average is $1 -you safety $25 worth of shares at $0.9 - price average is $0.966 -you safety $25 worth of shares at $0.8. - price average is $0.925 -you get stopped out at 0.925 * (1-.15) = $0.78625, and you're left with $78.62. This is a realized loss of ~21.4% with a stop loss set to 15%. The larger your safety order threshold, the larger your real loss in comparison to your stop loss percentage, and vice versa. Indicator plots show the calculated bases in white. The closest base below price is yellow. If that base is broken, it turns purple. Once a trade is entered, profit target is shown in silver and stop loss in red.
Pine Script® ストラテジー
tapRoot_codingの投稿
14
Break of structure (BOS) forex StrategyPlease read all Details before using this indicator This strategy is based on taking position after the break of a Previous High/Low swing happens (fixed time frame), the break of structure happens because of the swing happens then we go long or short respectively in this strategy. I will be discussing the setting details through which you can make it work on different forex pairs. Does it work on other pairs? Yes, I have found similar back test results on other USD pairs. Does it works on smaller time frame? Yes it does work on smaller time frame , you have to understand the below concepts used and try different settings. For the user the most important thing is to understand the settings of the indicator so that they can optimize the setting and get the best results: This indicator contains the following IMPORTANT setting: i. Fixed trading session for long trades (long position can be taken in that period of time only) ii. Fixed trading session for short trades (Short position can be taken in that period of time only) The concept behind restricting the time to go long or short is because in forex the particular pair move in a particular direction depending upon the currency and time zones. This strategy works on different forex pairs, you need to find the best settings. I will be providing the best settings which works for this strategy and different pairs. 2. Choose Previous High/Low Timeframe This is the most important option where you have to choose the timeframe for which you want H/L by default it is set to “D”. This timeframe H/L reference will be taken for taking trading decisions. 3.Setting for back test selection date range you can check the beck test of a particular time range. 4.You can check Long and Short positions performance separately, by unchecking the “Go_long” option it will remove all long positions from back test. Vice versa for “Go_short option” 5.Internal Bar Strength IBS is simply an indicator where you buy on weakness and sell on strength, the cornerstone of any mean-reverting strategy. It oscillates from zero to one and measures the relative position of the closing price relative to the High and Low. IBS = (Close – Low) / (High – Low) In the input setting the you can disable enable the IBS option from the strategy. 6. Parkinson volatility Parkinson volatility is a volatility measure that uses the stock’s high and low price of the day (can be changed in the setting, instead of day it can be set to any bar length) The main difference between regular volatility and Parkinson volatility is that the latter uses high and low prices for a day, rather than only the closing price. In the setting you have three option i. Enter Volatility Threshold If the Parkinson volatility value is greater than the the threshold value then it lets the trade happen. ii.Set the high/low bar time frame for calculating Parkinson volatility. ( Set 60m by default) Formula used as below: high_=security(syminfo.ticker, input("60"), high) low_=security(syminfo.ticker, input("60"), low) hourlyRangeSquared = pow((log(high_) - log(low_)), 2) dailyParkinsonVol = sqrt(sum(hourlyRangeSquared, 24) / (4 * log(2))) 7. "Enter no of contract size" This setting helps you to set the contract size , by default it is set to 100000. 8. “Zigzag Filter Length” this setting is for SWING H/L Lookback. With the help of this I have ploted Swing Support and Resistance. 9.Futrther confirmation of trade is done through the RSI criteria. In this I have provided four kind of RSI confirmation you can test all by selecting any one of the four. i. filter trade on the basis of BB of RSI (as shown in the image) ii. filter trade on the basis of RSI Levels (RSI>50 for long, vice versa for short) iii. filter trade by rsi>basis of BB of RSI(for long) & rsi<50(for short) iv. filter trade by rsi>50(long) & rsi< basis of BB of RSI(short) SELECT ONLY ONE OF THE ABOVE IN SETTING. 10.For Exiting the trade I have used the trailing SL you can change it in setting. You can exit the trade using two targets (two take profit) using different size for exiting the trade. If you want to take only on target then you have to make QANTITY of shares for 1st Exit as 100. Then you will exit all your position in the first target. A big thanks to kodify.net there articles are very helpful kodify.net Thanks to Mickey for providing assistance. Thanks to stack overflow community for clearing the doubts. Trading view official documentation on V4 of pine script also helped me.
Pine Script® ストラテジー
TJalamの投稿
123
alGROWithm Premium - Strategy TesterThe alGROWithm Strategy Tester is a supplement to the original alGROWithm indicator. Use this strategy to do your own back testing and find the best settings that work for your asset of choice. █ WHY THIS IS IMPORTANT Different assets require different settings for optimal results. This strategy script will allow you back test different settings for alGROWithm in order to analyze key metrics such as win rate and P/L. TradingView functionality also enables you to view a high level performance summary and even see every single individual trade made by the algo. █ BEST PRACTICES Depending on the asset you are testing, it is very important to update the settings as needed. For example, if you are back testing on US30, you will likely need to increase the starting capital. For other assets, you may also need to change the order size to use the Contracts option. It is important to decide for yourself which back testing parameter you will weigh more heavily in terms of importance. For example, a day trader may want to use a setting that maximizes win rate rather than profit % since we are humans and not computers. Further, it is highly recommended to utilize all of the rich features that TradingView provides with regards to back testing. For example, using the List of Trades tab, go back to find a failed trade and analyze the trade to see if you actually would have taken it in the moment. After finding the best sensitivity for your asset, it is important to set that sensitivity value on the non-strategy version of alGROWithm for usage. Changing settings on this version will not carry over to the non-strategy version. █ DEFAULT SETTINGS We have set the following default settings on the strategy: Starting capital: $100k Order size: 30% of equity Sell 1/5 of position every Take Profit level
Pine Script® ストラテジー
algrowithmの投稿
6
Automated - Fibs with Limit only ordersAutomated - Fibs with Limit only orders This script was designed to demonstrate how you can use a single alert to move your limit orders around. It is not meant to be traded live and has been built to work with Binance Futures Testnet. You will notice a lot of plots with 5 different titles. New = Place your limit buy at a fixed-price. Move = Cancel the current limit buy and place it at the new fixed-price. Filled = Cancel any limit closes and places them anew based on the new average and take profit. Cancel = Cancels exisiting limit buys. Cloes All = Limit close filled, no commands necessary. The default quantity in the command is the minimum order size on Binance. Settings Live - If enabled it will only place trades after the "Stat Timestamp + Start Delay" that you provide. Start Timestamp - Use something similar to epochconverter to get the current timestamp. Start Delay - Gives you 1 minute by default to start the script and create your alert before it begins looking for a new entry. Leverage - Default 1. Affects the "Take Profit and DCA When" Settings. Take Profit % - This is the percentage above the current average you'd like to place your position close at. DCA When % - The percentage below your last entry that you're willing to buy again. Note: This strategy has no stop-loss and pyramiding is enabled. It is not built for, or recommended to run live. I hope this opens some doors and helps advance your personal trading system. Good luck and happy scripting!
Pine Script® ストラテジー
CryptoRoxの投稿
18
[LunaOwl] Support Resistance Strategy V4作品: 支撐壓力策略 A simple Support Resistance Breakthrough Strategy, the only difference is that it is PineScript @version=4. interested parties can use it as a reference. Its logic is simple, wish your all the best. 一個簡單的支撐阻力突破策略，唯一的差異，在於它是PineScript第四版。有興趣的可以拿來當作參考，簡易的指標。祝你們順心。 Support level refers to the support price that the exchange rate may encounter when it falls, so as to stop falling and stabilize the price. The corresponding concept is the resistance level, that is, the pressure that the exchange rate may encounter when it rises, thus reversing to a falling price. 支撐位是指匯價在下跌時可能遇到的支撐價格，從而止跌回穩的價格，對應的概念是阻力位，也即匯價上漲時可能遇到的壓力，從而反轉為下跌的價格。
Pine Script® ストラテジー
LunaOwlの投稿
13
[astropark] VWAP Crosses [strategy]Dear Followers, today a new Swing and Scalping Strategy based on WVAP , mainly designed for Bitcoin and High-Cap Cryptocurrencies, like Ethereum. It works also on Forex and Stocks. It works great since 15m and above till 1D. I suggest you to use it on 15m, 30m or 1h timeframes . VWAP or "Volume Weighted Average Price" is a volume-based indicator similar to a moving average. This trading indicator is used to identify market resistance and support levels and is represented as a weighted average price for the treaded volumes. My strategy will help you identify main support-resistance level to be careful of and it will trigger a buy or a sell depending on how price will intereact with vwaps. green means we are in a bullish trend, in fact it start with a "buy" signal red means we are in a bearish trend, in fact it start with a "sell" signal blue means we are in a moment where trend may change, so be careful and always remember that taking profits is awesome and have a stoploss is a must in trading The user who wants to use this strategy, especially via an automated bot, must always set a stoploss (example 150$ from entry on bitcoin) or use a proper risk management strategy . This is not the "Holy Grail", so use it with caution. It's highly suggested to use a proper money management . This script will let you backtest this script and check profitability on your preferred market. The alarms version of this indicator, which will let you set all notifications you may need in order to be alerted on each triggered signals, can be found by searching for astropark "VWAP Crosses" This is a premium indicator , so send me a private message in order to get access to this script.
Pine Script® ストラテジー
astroparkの投稿
12
Support/Resistance Algo-Tradeing StrategyThis strategy Automates Support and resistance trading and a tight trailing stop loss technique. The support and resistance levels are calculated from previous highs and lows; these levels are used to make two types of trades: 1. Break out trades, taking a trade if the market is able to push through a support or resistance level. 2. Liquidity pool rejection, also known as a stop loss hunt. When the market is brought past a key level (to take out stop losses) which traders (usually institutions) use to enter, which then reverses back through the support/resistance level where the strategy enters a trade. An optional "volatility filter" may be used when on a suitable market. This means that trades are only entered when there is suitable volatility. A tight stop loss is kept so most trades lose, but winning trades are left to run much further. So this is a very reliable profitable strategy on many markets. For a limited time I will provide access to this strategy for free as it is not yet complete, there is still testing to do and I would appreciate any feedback.
Pine Script® ストラテジー
JamesRkayeの投稿
24