SeaSide420

Ichimoku + Daily-Candle_X + HULL-MA_X + MacD

Ichimoku_cloud + Daily-Candle_cross(DT) + HuLL-MovingAverage_cross + MacD
any timeframe, all indicators settings adjustable for fine tuning to pair/timeframe
Target Point and Stop Loss settings
set SL low to reduce repaint
お気に入りスクリプトから削除 お気に入りスクリプトに追加
//@version=2
// Any timeFrame ok but good on 15 minute & 60 minute , Ichimoku + Daily-Candle_cross(DT) + HULL-MA_cross + MacD combination 420 special blend
strategy("Ichimoku + Daily-Candle_X + HULL-MA_X + MacD", shorttitle="٩(̾●̮̮̃̾•̃̾)۶", overlay=true, default_qty_type=strategy.percent_of_equity, max_bars_back=720, default_qty_value=100, calc_on_order_fills= true, calc_on_every_tick=true, pyramiding=0)
keh=input(title="Double HullMA",type=integer,defval=14, minval=1)
dt = input(defval=0.0010, title="Decision Threshold (0.001)", type=float, step=0.0001)
SL = input(defval=-500.00, title="Stop Loss in $", type=float, step=1)
TP = input(defval=25000.00, title="Target Point in $", type=float, step=1)
ot=1
n2ma=2*wma(close,round(keh/2))
nma=wma(close,keh)
diff=n2ma-nma
sqn=round(sqrt(keh))
n2ma1=2*wma(close[1],round(keh/2))
nma1=wma(close[1],keh)
diff1=n2ma1-nma1
sqn1=round(sqrt(keh))
n1=wma(diff,sqn)
n2=wma(diff1,sqn)
b=n1>n2?lime:red
c=n1>n2?green:red
d=n1>n2?red:green
confidence=(security(tickerid, 'D', close)-security(tickerid, 'D', close[1]))/security(tickerid, 'D', close[1])
conversionPeriods = input(9, minval=1, title="Conversion Line Periods")
basePeriods = input(26, minval=1, title="Base Line Periods")
laggingSpan2Periods = input(52, minval=1, title="Lagging Span 2 Periods")
displacement = input(26, minval=1, title="Displacement")
donchian(len) => avg(lowest(len), highest(len))
conversionLine = donchian(conversionPeriods)
baseLine = donchian(basePeriods)
leadLine1 = avg(conversionLine, baseLine)
leadLine2 = donchian(laggingSpan2Periods)
LS=close, offset = -displacement
MACD_Length = input(9)
MACD_fastLength = input(12)
MACD_slowLength = input(26)
MACD = ema(close, MACD_fastLength) - ema(close, MACD_slowLength)
aMACD = ema(MACD, MACD_Length)
closelong = n1<n2 and close<n2 and confidence<dt or strategy.openprofit<SL or strategy.openprofit>TP
if (closelong)
    strategy.close("Long")
closeshort = n1>n2 and close>n2 and confidence>dt or strategy.openprofit<SL or strategy.openprofit>TP
if (closeshort)
    strategy.close("Short")
longCondition = n1>n2 and strategy.opentrades<ot and confidence>dt and close>n2 and leadLine1>leadLine2 and open<LS and MACD>aMACD
if (longCondition)
    strategy.entry("Long",strategy.long)
shortCondition = n1<n2 and strategy.opentrades<ot and confidence<dt and close<n2 and leadLine1<leadLine2 and open>LS and MACD<aMACD
if (shortCondition)
    strategy.entry("Short",strategy.short)//                         /L'-, 
//                               ,'-.           /MM . .             /  L '-, 
//     .                    _,--dMMMM\         /MMM  `..           /       '-, 
//     :             _,--,  )MMMMMMMMM),.      `QMM   ,<>         /_      '-,' 
//     ;     ___,--. \MM(    `-'   )M//MM\       `  ,',.;      .-'* ;     .' 
//     |     \MMMMMM) \MM\       ,dM//MMM/     ___ < ,; `.      )`--'    / 
//     |      \MM()M   MMM)__   /MM(/MP'  ___, \  \ `  `. `.   /__,    ,' 
//     |       MMMM/   MMMMMM( /MMMMP'__, \     | /      `. `-,_\     / 
//     |       MM     /MMM---' `--'_ \     |-'  |/         `./ .\----.___ 
//     |      /MM'   `--' __,-  \""   |-'  |_,               `.__) . .F. )-. 
//     |     `--'       \   \    |-'  |_,     _,-/            J . . . J-'-. `-., 
//     |         __  \`. |   |   |         \    / _           |. . . . \   `-.  F 
//     |   ___  /  \  | `|   '      __  \   |  /-'            F . . . . \     '` 
//     |   \  \ \  /  |        __  /  \  |  |,-'        __,- J . . . . . \ 
//     |    | /  |/     __,-  \  ) \  /  |_,-     __,--'     |. .__.----,' 
//     |    |/    ___     \    |'.  |/      __,--'           `.-;;;;;;;;;\ 
//     |     ___  \  \     |   |  `   __,--'                  /;;;;;;;;;;;;. 
//     |     \  \  |-'\    '    __,--'                       /;;;;;;;;;;;;;;\ 
// \   |      | /  |      __,--'                             `--;;/     \;-'\ 
//  \  |      |/    __,--'                                   /  /         \  \ 
//   \ |      __,--'                                        /  /           \  \ 
//    \|__,--'                                          _,-;M-K,           ,;-;\ 
//                                                     <;;;;;;;;           '-;;;; 
//a1=plot(n1,color=c)
//a2=plot(n2,color=c)
//plot(cross(n1, n2) ? n1 : na, style = circles, color=b, linewidth = 4)
//plot(cross(n1, n2) ? n1 : na, style = line, color=d, linewidth = 4)
//plot(conversionLine, color=#0496ff, title="Conversion Line")
//plot(baseLine, color=#991515, title="Base Line")
//plot(close, offset = -displacement, color=#459915, title="Lagging Span")
//p1=plot (leadLine1, offset = displacement, color=green,  title="Lead 1")
//p2=plot (leadLine2, offset = displacement, color=red,  title="Lead 2")
//fill(p1, p2, color = leadLine1 > leadLine2 ? green : red)
// remove the "//" from before the plot script if want to see the indicators on chart

コメント

Does it repaint :/?
+25 返信
ok everyone, This strategy is old. it repaints, and mostly because of the daily candle cross part of it.
the script is open to see. Either suggest a fix to it, or move on.
I would delete this if i were able too. No one should use this script.
The strategy actually works fine as a MT4 robot, but here on tradingview there is repainting on the chart.
Why dont yall complain to tradingview to make a backtester that doesnt repaint, then i can bring you the win

or just use MT4 robot or API robot

0_o
+17 返信
SeaSide420 SeaSide420
@SeaSide420, you know what really sux... somoone out there knows how to fix repainting, takes this and fixes it, then doesnt share....
Charting are joke anyway

I only trade with robots, which never paint anything, they simply enter or exit trades, which cannot be repainted
+2 返信
mortdiggiddy SeaSide420
@SeaSide420, to fix the repainting, one line needs to be changed at line 22:

from:

confidence=(security(tickerid, 'D', close)-security(tickerid, 'D', close))/security(tickerid, 'D', close)

to:

confidence=(close-security(tickerid, 'D', close))/security(tickerid, 'D', close)

It's that simple. You were using the close of the current day which can be "seen ahead of time for historical data". What you need to do is use the current close of the day which is basically the close at any time. The previous close values marked with for the previous day are "already locked in".
+7 返信
brad7502 mortdiggiddy
@mortdiggiddy, Are you sure this works? If you are right it's the greatest strategy of all time.
返信
brad7502 mortdiggiddy
@mortdiggiddy, your wrong still repaints
返信
@brad7502, how about using this?

confidence=(security(tickerid, '480', close)-security(tickerid, 'D', close))/security(tickerid, 'D', close)
+1 返信
DO NOT USE
+9 返信
Does this work in real time for suggesting entry/exit points? I trade cryptocurrency and this indicator doesn't seem to function well for any time frame less than 1 Hour, and often "rewrites" what the Buy/Sell points were when you come back to the chart later. Is this merely a training tool for understanding the entry/exit points, or is this an active trading device?
+6 返信
glennmartin76 TheProphetOfProfit
@IOnlySupportGG, yeah this performs best in 1 or 2hr periods it seems, not sure about the rewriting thought.
返信
ホーム 株式スクリーナー FXスクリーナー 仮想通貨スクリーナー 経済指標カレンダー 使い方 チャート機能 価格 友達紹介 ハウスルール ヘルプセンター ウェブサイト&ブローカー向けソリューション ウィジェット チャートソリューション 軽量チャートライブラリ ブログ&ニュース ツイッター
プロフィール プロフィール設定 アカウントとお支払い 友達紹介 マイサポートチケット ヘルプセンター 公開したアイデア フォロワー フォロー中 プライベートメッセージ チャット サインアウト