ATR ZLEMA [QuantAlgo]🟢 Overview
The ATR ZLEMA indicator identifies trend direction and reversal points using a Zero Lag Exponential Moving Average (ZLEMA) combined with volatility-adjusted dynamic trailing stops. It eliminates the inherent lag of traditional moving averages while incorporating Average True Range (ATR) volatility measurement to create adaptive support and resistance levels that automatically adjust to market conditions, with optional noise filtering to reduce whipsaws in choppy markets, helping traders and investors identify trend changes, maintain positions during trending markets, and exit when momentum shifts across multiple timeframes and asset classes.
🟢 How It Works
The indicator's core methodology lies in its zero-lag trend detection system combined with volatility-adaptive trailing stops, where the ZLEMA eliminates moving average lag while ATR-based bands provide dynamic support and resistance levels:
lag = math.floor((zlemaLength - 1) / 2)
rawZlema = ta.ema(source + (source - source ), zlemaLength)
The Zero Lag EMA calculation uses lag reduction through data compensation, adding the difference between current price and lagged price to eliminate the delay inherent in traditional exponential moving averages, providing faster response to trend changes while maintaining smoothness.
The script incorporates an optional ATR-based noise filter that prevents the ZLEMA from updating during insignificant price movements, helping to reduce false signals in choppy, range-bound markets:
if enableNoiseFilter
noiseThreshold = atr * noiseFilter
priceChange = math.abs(rawZlema - zlema)
if priceChange > noiseThreshold
zlema := rawZlema
First, the indicator calculates the Average True Range to measure current market volatility, then applies a user-defined multiplier to determine the distance of the trailing stop from the ZLEMA:
atr = ta.rma(ta.tr(true), atrLength)
atrBand = atr * atrMultiplier
Next, dynamic trend detection occurs through a state-based system where the indicator tracks whether the ZLEMA is above or below the ATR trailing line, automatically adjusting the trailing stop position:
if trend == 1
if zlema < zlemaATR
trend := -1
zlemaATR := zlema + atrBand
else
zlemaATR := math.max(zlemaATR, zlema - atrBand)
The ATR trailing line acts as a volatility-adjusted stop that follows the ZLEMA during trends but never moves against the trend direction. It ratchets upward with the ZLEMA in uptrends and ratchets downward in downtrends, creating a protective barrier that adapts to market volatility.
Finally, trend reversal signals are generated when the ZLEMA crosses the ATR trailing line, indicating a shift in market momentum:
bullSignal = trend == 1 and trend == -1
bearSignal = trend == -1 and trend == 1
This creates a volatility-adaptive trend-following system that combines ZLEMA with dynamic support/resistance levels and optional noise filtering, providing traders with responsive directional signals and automatic stop-loss levels that adjust to both price momentum and market volatility conditions.
🟢 Signal Interpretation
▶ Bullish Trend (Green): ZLEMA trading above ATR trailing line with indicator showing bullish color, indicating established upward momentum with zero-lag confirmation = Long/Buy opportunities
▶ Bearish Trend (Red): ZLEMA trading below ATR trailing line with indicator showing bearish color, indicating established downward momentum with zero-lag confirmation = Short/Sell opportunities
▶ ATR Trailing Line as Dynamic Support: In uptrends, the trailing line acts as volatility-adjusted support level that rises with ZLEMA, never declining = Use as potential stop-loss reference for long positions = ZLEMA holding above indicates trend strength and momentum continuation
▶ ATR Trailing Line as Dynamic Resistance: In downtrends, the trailing line acts as volatility-adjusted resistance level that falls with ZLEMA, never rising = Use as potential stop-loss reference for short positions = ZLEMA holding below indicates trend weakness and momentum continuation
🟢 Features
▶ Preconfigured Presets: Three optimized parameter sets for different trading styles and market conditions. "Default" provides balanced configuration suitable for swing trading on daily and 4-hour charts with standard ZLEMA and ATR periods, moderate multiplier, and moderate noise filtering that works across most market conditions. "Fast Response" delivers aggressive configuration designed for intraday trading and scalping on 5-minute to 1-hour charts with shorter ZLEMA period for quick trend detection, reduced ATR period for rapid volatility adaptation, tighter multiplier for early entries/exits, and minimal noise filtering for maximum responsiveness. This is ideal for active traders monitoring positions closely but expect more frequent signals and potential whipsaws in choppy conditions. "Smooth Trend" focuses on conservative configuration for position trading and long-term trend following on daily to weekly charts with extended ZLEMA period for smoother trend identification, longer ATR period for stable volatility measurement, wide multiplier to filter minor corrections, and aggressive noise filtering to ensure only strong sustained trends trigger signals. This is best for patient traders focused on major trend moves with fewer reversals.
▶ Built-in Alerts: Three alert conditions enable comprehensive automated monitoring of trend changes and zero-lag momentum shifts. "Bullish Trend" triggers when the ZLEMA crosses above the ATR trailing line and trend state changes from bearish to bullish, signaling potential long entry opportunities with lag-eliminated confirmation. "Bearish Trend" activates when the ZLEMA crosses below the ATR trailing line and trend state changes from bullish to bearish, signaling potential short entry or long exit points with immediate momentum detection. "Any Trend Change" provides a combined alert for any trend reversal regardless of direction, allowing traders to be notified of all zero-lag momentum shifts without setting up separate alerts. These notifications enable traders to capitalize on trend changes and protect positions without continuous chart monitoring, leveraging the indicator's zero-lag technology for faster trend change alerts.
▶ Color Customization: Six visual themes (Classic, Aqua, Cosmic, Ember, Neon, plus Custom) accommodate different chart backgrounds and visual preferences, ensuring optimal contrast for identifying bullish versus bearish trends across various trading environments. The adjustable cloud fill transparency control (0-100%) allows fine-tuning of the gradient area prominence between the ATR trailing line and ZLEMA, with higher transparency values (70-95) creating subtle background context without overwhelming the chart while lower values (20-40) produce bold, prominent trend zone emphasis for instant recognition. Optional bar coloring with adjustable transparency (0-100%) extends the trend color directly to the price bars themselves based on ZLEMA trend state, providing immediate visual reinforcement of current trend direction without requiring reference to the indicator lines.
移動平均線
Root Deviation Loop | Lyro RSThe Root Deviation Loop indicator is a multi-mode trend signal tool that detects price momentum and breakout conditions using Root Mean Square Deviation (RMSD) instead of standard deviation. It provides a flexible framework for analyzing market conditions through three distinct signal generation methods: Bollinger Band-style deviation, a loop-based scoring system, and a hybrid combined signal. These modes help highlight trend continuation or reversal zones with a focus on smoothing out noise and avoiding extreme outlier effects.
Indicator Modes
Bollinger-Style RMSD Bands
This mode plots upper and lower volatility bands using RMSD around a selected moving average. RMSD is used instead of standard deviation for a more stable measurement of price dispersion. The formula for the bands is:
Upper Band = Moving Average + (RMSD × Multiplier)
Lower Band = Moving Average − (RMSD × Multiplier)
The bands dynamically expand and contract based on market volatility. Crossovers above or below these bands are used to signal trend shifts or breakouts.
For-Loop Momentum Scoring
This mode calculates a loop-based trend score by comparing the RMSD-weighted source to its historical values within a defined range. The loop evaluates the directional bias of price changes:
If the current value is greater than past values, it adds to the score.
If it is lower, it subtracts from the score.
This produces a net momentum score used to determine bullish or bearish dominance.
RMSD Weighted Source = (Price × RMSD) / RMSD
Score = Sum over loop: (src > src ) ? +1 : -1
Combined Signal
This mode merges the outputs of the Bollinger RMSD and For-Loop modes. It averages both signals into a single composite score. A long or short signal is generated based on whether the combined score crosses above or below user-defined thresholds.
Signal Interpretation
In the Bollinger Bands mode, signals are generated based on price interaction with the RMSD bands:
A long signal occurs when price crosses above the upper RMSD band
A short signal occurs when price crosses below the lower RMSD band
No signal is produced when price remains between bands
These signals suggest potential breakout points when price momentum exceeds recent volatility-defined boundaries.
⚠️Disclaimer
This indicator is a technical analysis tool and does not guarantee results. It should be used in conjunction with additional analysis methods and proper risk management strategies. The creators of this indicator are not responsible for any financial decisions made based on its signals.
ED by bigmmED by bigmm identifies significant price divergences from the 200-period Exponential Moving Average (EMA) by analyzing closing and opening price extremes. This tool marks the three most recent candles with the largest percentage deviations.
Key Features
EMA200 Analysis: Uses the 200-period Exponential Moving Average as the primary reference level for measuring price deviations
Deviation Calculation: Computes percentage-based deviations for both closing (below EMA) and opening (above EMA) prices
Top 3 Extremes: Identifies and marks only the three most recent maximum deviations for each direction
Visual Simplicity: Uses minimalistic green and red dots for clear visual identification without chart clutter
Historical Analysis: Evaluates the last 1440 bars (approximately 3 years on daily timeframe) to find significant deviation patterns
Recommended Usage
Best used on higher timeframes (H4, D1, W1) for the following reasons:
Reduced Noise: Higher timeframes filter out market noise and provide cleaner deviation signals
Trend Context: EMA200 carries more significance on daily and weekly charts as a major trend indicator
Strategic Signals: Extreme deviations on higher timeframes often correspond to important support/resistance levels and potential reversal zones
Reduced False Signals: Longer timeframes minimize whipsaws and provide more reliable extreme readings
Position Trading: Ideal for swing traders and position traders who base decisions on daily or weekly price action
Nadaraya-Watson: Multi-FilterThe "Nadaraya" indicator models a curve fitted to the bars using the Rational Quadratic Kernel function - based on the script with additional filters that help plot the trend directly on the price chart.
The following filters are used:
- ALMA curve logic to smooth the Watson Nadaraya regression curve -Additionally, ALMA has a "volume-weighted" option, which may be important when there is little data or small price fluctuations - it helps stabilize the bar price
- ATR logic to smooth local data based on the assumed window and multiplier
- Local data deviation (fluctuations within the local window) logic to smooth the Watson nadaraya regression curve
The basic data is optimized for BTC on a 1D (daily) timeframe to demonstrate the indicator's capabilities.
Due to the relatively complex process of optimizing parameters for any timeframe, it is recommended to start with ATR and %. After optimization for a given interval, the indicator is very precise, although it is recommended to use it for very liquid assets with a large amount of data (sampling) - this is aimed at creating a smooth curve with an accurate indication of the change in the trend direction.
EMA Based TMA Bands [NeuraAlgo]EMA Based TMA Bands
Overview
EMA Based TMA Bands is a volatility-adaptive trend and reversal indicator that combines a Triangular Moving Average (TMA) with EMA-weighted smoothing and dynamic deviation bands. It is designed to identify trend direction, overextended price conditions, and potential reversal points with high visual clarity.
The indicator plots a central TMA line along with three upper and three lower volatility bands, automatically adapting to market conditions.
Core Concepts
1. Triangular Moving Average (TMA)
The TMA is calculated using triangular weighting, giving more importance to central bars.
This creates a smoother and more stable average compared to SMA or EMA.
The TMA acts as the main equilibrium price level.
2. EMA-Weighted Enhancement
An additional EMA-style weighting is applied using a custom coefficient.
This allows fine-tuning between smoothness and responsiveness.
Lower coefficient = smoother behavior
Higher coefficient = faster reaction to price changes
Volatility Bands
The bands are calculated using a weighted variance model:
Positive and negative deviations are tracked separately.
This allows asymmetric volatility response in bullish and bearish conditions.
Band Structure
Inner Band – Primary deviation
Middle Band – 1.15× deviation
● Outer Band – 1.30× deviation
These bands help identify:
● Overbought and oversold zones
● Volatility expansion and contraction
● Mean reversion opportunities
Trend Detection
Trend direction is determined by the slope of the TMA, normalized by ATR.
● Bullish Trend: TMA slope rising beyond threshold
● Bearish Trend: TMA slope falling beyond threshold
● Flat Market: No significant slope
The TMA line automatically changes color based on trend state.
Trading Signals
Buy Signal
A buy signal is triggered when:
● Price previously closes below the lower band
● A bullish candle forms on the current bar
● Suggests rejection of lower volatility zone
Sell Signal
A sell signal is triggered when:
● Price previously closes above the upper band
● A bearish candle forms on the current bar
● Suggests rejection of upper volatility zone
Signals are displayed as small triangle markers on the chart.
Inputs
Main Settings
● TMA Period: Length of the triangular moving average
● EMA Period: Length of EMA-weighted smoothing
● EMA Coefficient: Controls EMA influence
● Band Deviation: Controls band width
● Price Source: Input price (default: HLC3)
● Trend Threshold: Sensitivity of trend detection
Art Settings
● Bullish Color: Color used for bullish bands and signals
● Bearish Color: Color used for bearish bands and signals
Best Use Cases
● Trend continuation trading
● Mean reversion strategies
● Volatility expansion setups
● Support and resistance visualization
Notes
● Best used on intraday to swing timeframes
● Works well with price action confirmation
● Not a repainting indicator, but smoothing introduces natural lag
Developed by NeuraAlgo
EUR/USD: EUR USD 5 MIN SCALPING by Scalper Pro Systems// DISCLAIMER:
// This script is for educational purposes only. It is not financial advice.
// Past performance does not guarantee future results.
// Use this tool at your own risk.
EUR/USD: EUR USD 5 MIN SCALPING by Scalper Pro Systems
Overview
This is a plug-and-play scalping system designed specifically for the EUR/USD 5-Minute chart . Created by Scalper Pro Systems , it simplifies intraday trading by automatically generating Buy/Sell signals with precise Take Profit and Stop Loss levels.
How It Works
The strategy uses a "Safety First" approach to find stable entries:
1. Trend Filter (EMA 200): Ensures you only trade with the main trend (Buy only if price is above; Sell only if price is below).
2. Entry Trigger (EMA 9 & 21): Identifies short-term momentum shifts.
3. Noise Filter (RSI): Prevents entering trades when momentum is weak or exhausted.
Main Features
🟢🔴 Clear Signals: Draws Green (Buy) and Red (Sell) boxes directly on the chart.
📉📈 Auto TP & SL: Instantly calculates your Stop Loss (based on recent swing lows/highs) and Take Profit (1.5x risk) and displays the exact price numbers.
⏱️ Live Tracking: The system tracks the trade for you and marks exactly when and where the Target or Stop Loss was hit.
📊 Dashboard: Shows Signal Time, Entry Price, TP, and SL in a clean information box.
Best Settings
Timeframe: 5 Minutes
Asset: EUR/USD (Can also be used on Gold/XAUUSD or Indices)
Session: Best used during London or New York sessions.
Risk Warning
Trading involves risk. This tool helps visualize a strategy but does not guarantee profits. Always manage your risk.
GK Trend Ribbon 10L (Ultra Tight) + PREPARE HUDThis upgraded GK Trend Ribbon keeps original ultra tight 10-line trend engine but now adds a Real Time Preparation system to help traders get ready before the signal print
New Additions
Prepare Alerts (Early Warming System)
Before a GK BUY or GK SELL confirms, the indicator now detects when trend conditions are forming and prints
PREPARE GK BUY
PREPARE GK SELL
this gives traders time to: Set lot Sizes
Mark entries
Prepare risk management
Avoid late entries
Live Trend HUD (heads up display)
green Bullish mode
red Bearish mode
grey Neutral/wait
Warning symbol PREPARE GK BUY/SELL when a move is building
this acts like a market control panel keeping traders aligned with the trend direction at all times
CORE ENGINE (unchanged power)
zero lag trend structure
ATR based dynamic bands
1 clean GK BUY/SELL per confirmed trend shift
visual ribbon showing strength and direction
this version improves timing, preparation, and confidence-without adding clutter
this indicator are for educational purposes only
THMA ~ CharonQuantTHMA is a high-precision trend following indicator designed to detect market transitions early while filtering out low-quality, low-momentum conditions.
Built on the Hull Moving Average framework, THMA extends the concept into a triple-nested structure that significantly reduces lag without sacrificing smoothness. The result is a fast, stable trend line that adapts well to volatile markets such as crypto, forex, and intraday equities.
Signals are not generated in isolation. Every long or short condition is validated through three independent filters :
Trend alignment via a higher-timeframe EMA
Directional control using DI (+DI / −DI)
Trend strength confirmation through ADX
Only when all filters align does a final signal trigger, helping suppress noise and whipsaw during ranging markets.
Visual Design
Persistent THMA state coloring
Long, muted gold (#D4A017)
Short, deep burgundy (#6B2A3A)
Lighter confirmation states when conditions are partially met
Trend EMA and dynamic price reference
ADX with threshold displayed in a separate pane
Alerts
Two native alert conditions are included:
THMA Long
Fires when finalLong becomes true
Condition, price > THMA, price > Trend EMA, ADX > threshold, +DI > −DI
THMA Short
Fires when finalShort becomes true
Condition, price < THMA, price < Trend EMA, ADX > threshold, −DI > +DI
Alert messages include exchange and ticker placeholders for automation and webhook use.
Important
No indicator replaces discipline or context.
THMA exists to reduce uncertainty, not eliminate risk.
Use it to escort price through volatility, not to chase it.
Alg0 Hal0 RSI 4555
The Alg0 ۞ Hal0 RSI 4555 is a trend-following momentum indicator designed to capture high-probability entries during market pullbacks. It combines a customizable Trend Filter (Moving Average) with a specialized "Armed & Triggered" RSI logic to avoid choppy markets and fakeouts.
1. How the Logic Works
This indicator uses a two-step process to generate signals, ensuring you only enter when momentum is confirmed.
The Trend Filter: The background color tells you the primary trend. If the price is above the Moving Average, the background is Green (Bullish). If below, it is Red (Bearish).
The "Arming" Phase: To prevent chasing "overbought" prices, the script must first see a pullback.
Longs: RSI must drop below 40 while the trend is Bullish.
Shorts: RSI must rise above 60 while the trend is Bearish.
The Trigger: Once "Armed," the script waits for a momentum shift.
LONG Signal: RSI crosses above 55.
SHORT Signal: RSI crosses below 45.
2. Key Visual Features
Dynamic Background: Instantly identifies the macro trend based on your chosen MA (SMA, EMA, HMA, WMA, or ALMA).
Momentum Labels: "LONG" and "SHORT" labels appear directly on the chart when all conditions are met.
Divergence Detection: Automatically plots Bullish and Bearish divergences to warn you of potential trend exhaustion.
Customizable Levels: The four key RSI levels (60, 55, 45, 40) are fully adjustable to fit different assets or timeframes.
3. Settings Guide
RSI Settings: Adjust the RSI length (default is 14) and toggle Divergence labels on/off.
Background Logic: Choose your preferred Moving Average style. ALMA is recommended for the smoothest trend filtering, while SMA/EMA are better for classic trend following.
Custom Levels: Fine-tune the 45/55 trigger points. For more aggressive entries, move these closer to the 50-midline. For more conservative entries, spread them further apart.
4. Best Practices
The "Neutral Zone": The area between 45 and 55 is the "No Man's Land." Wait for a clean candle close and a label before entering a trade.
Risk Management: Use the Recent Swing High/Low or the Trend MA as a logical stop-loss level.
Alg0 Hal0 CCI SnapAlg0 ۞ Hal0 CCI Snap
1. The Core PhilosophyThe A۞H CCI Snap is a dual-confirmation momentum oscillator. Unlike standard oscillators that only look at one data stream, this tool separates Market Structure (Background Trend) from Momentum Velocity (CCI Snap). It is designed to identify "Mean Reversion" opportunities and "Trend Continuation" snaps.
2. The Interface (Visual Components)The CCI Line (Blue): Tracks the "typical price" relative to its average. It tells you how fast the market is moving.The Signal Line (Yellow): A customizable moving average (HMA, TEMA, etc.) of the CCI. It filters out the "jitters" of the blue line.Background Trend (Green/Red): This is independent of the CCI. It tracks whether the actual Price is above or below a long-term Moving Average (default is 50 SMA).The 5-Color Heatmap Dashboard: A real-time data table that calculates the "Heat" of the current momentum compared to the last 3 bars.
3. How to Trade with A۞H CCI Snap
۞ The "Snap" Entry (Trend Continuation)This is the highest probability trade. You are looking for a momentary dip in a strong trend.Check Background: Background must be solid Green.Observe CCI: The Blue CCI line dips below the Yellow Signal line (a "cooling off").The Trigger: Enter when the Blue line snaps back above the Yellow line.Confirmation: The Dashboard should show Dark Green (Accelerating Bullish Heat).
۞ The Zero-Line Rejection (Trend Strength)
The 0 line is the "Fair Value" of momentum.Bullish: In a Green background, if CCI drops toward 0 but bounces off it without crossing, it confirms the trend is extremely strong.
Bearish: In a Red background, if CCI rises toward 0 but "rejects" and heads back down, it confirms heavy selling pressure.
۞ Exhaustion Warning (Mean Reversion)If the CCI is above +200 or below -200, the market is overextended. Look at the Dashboard Heatmap: If the CCI is at +210 but the cell color turns from Dark Green to Light Green, the "Heat" is leaving the move. This is your signal to tighten stop-losses or take profits.
4. Input Customization Guide and Recommendations
* Setting GroupFunctionPro-TipCCI CoreSets the sensitivity of the blue line.
* Use 14 for scalping, 20 for day trading.
* CCI SignalSets the smoothing of the yellow line.
* HMA (Hull) is best for crypto due to low lag.Background
* TrendDrives the Green/Red chart color.
* Set to 50 SMA for a "Trend Filter" or 200 SMA for "Macro" view.
* Alert SettingsToggles specific notifications.
* Turn off "Zero Cross" if you only want major Trend Flips.
5. Interpreting the Heatmap Dashboard:
۞ Dark Green (+): Bullish Acceleration (Buy/Hold).
۞ Light Green (+): Bullish Deceleration (Caution/Take Profit).
۞ Gray (0): No Momentum (Range-bound/Sideways).
۞ Orange/Light Red (-): Bearish Deceleration (Short Cover/Bottom Fish).
۞ Dark Red (-): Bearish Acceleration (Sell/Short).
!! Important Technical Note!!
VWAP Option: If you select VWAP as your Trend MA Type, the background will only color on charts that provide Volume Data (Stocks, Crypto, most Futures). It will appear gray on most Forex pairs.
SMA Multi-Sync Granville & MTF CounterSMA Multi-Sync Granville & MTF Counter
Overview
This indicator is an environmental awareness tool that identifies when and to what level moving averages (SMAs) across multiple time frames align in the same direction, visualizing the timing and freshness of the trend.
Its greatest feature is that it does not simply determine synchronization; rather, it precisely distinguishes the time frame upon which synchronization is completed using the number of stars (★).
Key Features
1. Calculation of "Stars" Based on Confirmed Time Frame Trigger
The number of stars displayed upon synchronization completion indicates the signal's "temporal weight."
★ (1): Synchronization is completed upon confirmation of the displayed time frame.
★★ (2): Synchronization is completed upon confirmation of the next higher time frame (e.g., 15 minutes).
★★★ (3): Synchronization is completed upon confirmation of the next higher time frame (e.g., 1 hour). The more higher the time frame is confirmed, the more powerful the trend reversal or regression it acts as.
2. MTF Sync Panel
The table on the right side of the screen displays the price position (background) and MA direction (text) for each level (displayed to daily) in real time.
By watching the background and text colors match, you can understand the accumulation of energy before a star appears.
3. Cross Counter
The number of bars elapsed from the synchronization starting point (MA crossover, etc.) to the current bar is displayed numerically in the lower right corner.
The closer to "0" the number, the more likely it is the beginning of a trend, while the higher the number, the more likely it is the end of the trend (expiration date).
Usability of Input Settings
Min Stars (1-5) This sets the signal cutoff. Setting it to "2" eliminates noise caused by the displayed bar being confirmed and narrows down to only the moment when the higher bar is confirmed (★2 or higher).
Cancel Alert if MA Slope Same If the MA of the displayed time frame is already leaning in the same direction (leading), the confirmation (★1) on that time frame will be considered "not an initial move" and excluded.
5m TF: Use 30m SMA When using 5-minute time frames, this physically changes the ★2 trigger from the confirmation on the 15-minute chart to the confirmation on the 30-minute chart. This is effective when targeting milestones on larger time frames.
*If you have any questions about how to use this, please ask in the comments.
SMA Multi-Sync Granville & MTF Counter
概要
本インジケーターは、複数の時間足の移動平均線（SMA）が「いつ、どの階層まで同じ方向に揃ったか」を特定し、そのトレンドの**「確定タイミング」と「鮮度」**を可視化する環境認識ツールです。
最大の特徴は、単なる同調判定ではなく、**「どの時間足の確定（Close）によって同期が完成したか」**を星（★）の数で厳密に区別する点にあります。
主な機能
1. 確定足トリガーによる「星」の算出
同期が完成した瞬間に表示される星の数は、そのシグナルの「時間的な重み」を示します。
★（1つ）：表示足の確定により同期が完成。
★★（2つ）：1つ上の上位足（15分等）の確定により同期が完成。
★★★（3つ）：2つ上の上位足（1時間等）の確定により同期が完成。 上位の足が確定する節目ほど、より強力なトレンドの転換・回帰として機能します。
2. MTF同期パネル
画面右側のテーブルで、各階層（表示足〜日足）の「価格の位置（背景）」と「MAの向き（文字）」をリアルタイムに表示します。
背景色と文字色が一致していく過程を見ることで、星が出る前の**「エネルギーの蓄積」**を把握できます。
3. クロスカウンター
同期の起点（MAクロス等）から、現在の足まで何本経過したかを右下に数値で表示します。
「0」に近いほど初動であり、数値が大きくなるほどトレンドの終盤（賞味期限切れ）である可能性を論理的に示唆します。
インプット設定の使い勝手
Min Stars (1-5) シグナルの足切り設定です。「2」に設定すれば、表示足の確定によるノイズを排除し、**上位足の確定が伴った瞬間（★2以上）**のみに絞り込めます。
Cancel Alert if MA Slope Same 表示足のMAがすでに同方向へ傾いている（先行している）場合、その足での確定（★1）を「初動ではない」とみなして除外します。
5m TF: Use 30m SMA 5分足運用時、★2のトリガーを「15分足」から「30分足」の確定に物理的に変更します。より大きな時間軸の節目を狙う場合に有効です。
※使い方が不明なところはコメントで聞いてください。
Scalping V5 - Strongest S/R & Predictive PanelScalping V5: Predictive Momentum & Institutional S/R by Herman Sangivera ( Papua )
Overview
Scalping V5 is a high-precision momentum indicator designed for lower timeframe traders (1m, 5m, 15m) who require a blend of trend-following logic and real-time structural analysis. Unlike standard indicators that only look at price action, this script utilizes a Dual-EMA Ribbon for momentum, a 200-period Filter for institutional bias, and a Predictive Probability Panel to gauge the strength of a potential move.
Key Features
1. Smart Momentum Ribbon (EMA 12/36)
The core of the strategy uses a dynamic ribbon.
Blue Ribbon: Indicates aggressive bullish momentum.
Red Ribbon: Indicates aggressive bearish momentum.
Traders should look for "Value Area" entries when the price retraces into the ribbon before continuing the trend.
2. Institutional Trend Guard (EMA 200)
To avoid "choppy" markets and counter-trend traps, the script plots a thick white baseline.
Above 200 EMA: Only Long setups are prioritized.
Below 200 EMA: Only Short setups are prioritized.
3. Dynamic Support & Resistance (S/R)
The script automatically calculates the Strongest Resistance (Highest High) and Strongest Support (Lowest Low) based on a 50-period lookback. This helps scalpers identify immediate "walls" in the market to set realistic Take Profit (TP) and Stop Loss (SL) levels.
4. Predictive Analytics Dashboard
The real-time panel in the top right provides:
Strategy State: Detects if the market is breaking out or consolidating.
Probability Score: A weighted calculation (smoothed by SMA) that determines the likelihood of the next move based on trend alignment.
Actionable Recommendation: Flashes "STRONG BUY" or "STRONG SELL" only when momentum and distance-to-target are optimal.
How to Trade with Scalping V5
Long Entry: Price must be above the EMA 200. Wait for the Ribbon to turn Blue and the Dashboard to display a Probability Up > 65%. Ensure there is enough "room" to the Red Resistance line.
Short Entry: Price must be below the EMA 200. Wait for the Ribbon to turn Red and the Dashboard to display a Probability Down > 65%. Ensure there is room to the Green Support line.
Exit Strategy: Take profits at the S/R levels or when the price closes back inside the EMA Ribbon.
Settings & Optimization
EMA 12/36: Optimized for Scalping. Increase to 20/50 for Day Trading.
Lookback S/R: Set to 50 for intraday levels; increase to 100 for more "significant" swing levels.
Overlay: This indicator is designed to be used directly on the price chart.
Disclaimer: Scalping involves significant risk. This tool is designed to assist your analysis and should be used in conjunction with proper risk management and price action confirmation.
UM Multi MA type, Directional Colors + Flip LabelsSummary
UM Multi MA is a multi–moving average trend overlay supporting SMA, EMA, WMA, HMA, KAMA, DEMA, and TEMA. Each MA is colored by slope direction, displays clean right-side Flip prices, and optionally adds price↔MA fills, bar/candle coloring, and alerts for MA direction changes.
⸻
Description
This indicator plots up to five independently configurable moving averages directly on the price chart. Each MA is colored green when rising and red when falling, based on its current slope.
On the last bar only, an optional right-side label displays the MA’s projected Flip price calculation:
• If the MA is currently green (rising), the label is green and shows
“Flip red @ ”
• If the MA is currently red (falling), the label is red and shows
“Flip green @ ”
The script also supports optional price↔MA fills, optional bar/candle coloring driven by any selected MA, and alerts when MA slope direction changes.
⸻
Features
• Up to five moving averages (MA1–MA5), each with independent Enable, Length, and Type settings
• Supported MA types: SMA, EMA, WMA, HMA, DEMA, TEMA, KAMA
• Directional MA coloring (green rising / red falling)
• Right-side labels (last bar only), indicator at what price MA will flip color
MA# TYPE LEN Flip red/green @ target price
• Optional price↔MA fill (user-selectable MA)
• Green fill when price > selected MA and MA is rising
• Red fill when price < selected MA and MA is falling
• Optional bar/candle coloring driven by any selected MA
• Alerts:
• Dropdown alertconditions (visible in the TradingView alert menu)
• Optional dynamic alert() messages that include MA type and length
⸻
Default Values
• Source: Close
• MA1: Enabled, EMA 8, Right-side label ON
• MA2: Enabled, EMA 21, Right-side label OFF
• MA3: Enabled, EMA 50, Right-side label OFF
• MA4: Enabled, EMA 100, Right-side label OFF
• MA5: Enabled, EMA 200, Right-side label OFF
• Label offset: 10 bars
• Price↔MA fill: OFF
• Fill MA: MA1
• Fill transparency: 90
• Candle coloring: OFF
• Color bars using: MA1
• Bar transparency: 0
• Alerts:
• Dropdown alertconditions ON
• Dynamic alert() messages OFF
• MA1 Bull/Bear alerts enabled by default
• MA2–MA5 alerts disabled by default
⸻
Suggested Uses
• Trend Regime Filtering
Use MA200 or MA100 to define bull vs bear regimes, then MA8 or MA21 for trade timing.
• Flip Target Awareness
Use the right-side Flip label as a quick visual reference for where MA slope direction is projected to change.
• Alignment Confirmation
Enable fills and/or candle coloring using your “decision MA” (commonly MA21 or MA50) to maintain consistency.
• Alerting Workflow
Use dropdown alertconditions for standard alerts.
Enable dynamic alerts only if you want messages that include MA type and length (alert type: Any alert() function call).
• KAMA for Chop Reduction
Try KAMA on MA21 or MA50 to reduce noise while staying responsive in trends.
• Faster MA Options (DEMA / TEMA)
Use DEMA or TEMA on MA8 or MA21 for earlier flips, understanding they are more sensitive in sideways markets.
• Volatility Expansion Awareness
Watch for periods where multiple MAs compress tightly; these often precede volatility or price expansion.
• Trade Execution Ideas
Red → green transitions may be used for entries or add-ons.
Green → red transitions may be used for exits or risk reduction.
• Multi-Timeframe Analysis
The author commonly uses Daily and 6-Hour timeframes together.
• MA Stretching Across Timeframes
If you like an 8-period MA on the Daily, try its longer equivalent on lower timeframes (for example, ~55 on the Hourly).
• Indicator Stacking
Designed to pair well with momentum, volatility, and market-structure indicators.
Rishii's EMA Trend EngineThis indicator is a dual-EMA trend framework designed to improve intraday decision-making by filtering out sideways market noise and highlighting only meaningful trend participation.
It uses a fast and slow EMA to define trend direction, while applying an HLC3-based color logic to show whether price is respecting each EMA. Candles turn green or red only when both the trend alignment and price participation conditions are satisfied. Neutral candles can be shown in white to visually remove noise and make valid candles stand out.
Additional filters such as EMA slope detection and optional higher-timeframe bias help avoid false signals during ranging conditions. A background trend zone and first-candle markers after EMA crossover further improve clarity without cluttering the chart.
How it helps
Clearly shows when the market is trending vs sideways
Highlights only those candles where price is truly participating in the trend
Filters out most whipsaws caused by flat EMAs BITSTAMP:BTCUSD
Combines trend bias, momentum, and participation in one clean view
Caution
This is a trend-following tool, not a reversal indicator.
When EMAs are flat and candles turn white, avoid trading
Do not treat every green/red candle as an entry; wait for proper structure.
Always use proper stop-loss and position sizing.
Alg0 Hal0 Dual MA CrossroadThe Alg0 ۞ Hal0 Dual MA Crossroad is a simple, yet high-precision trend-following indicator designed to eliminate the common pitfalls of standard Moving Average systems: lag and lack of context. By combining responsive MA algorithms with a sophisticated momentum "streak" engine, this tool provides a comprehensive view of market structure.
1. Advanced MA Algorithms
Unlike standard crossovers, this tool allows you to select from 8 different calculation methods for both the Fast and Slow lines.
ZLEMA (Zero Lag EMA): Uses a de-lagging formula to track price turns faster than a standard EMA.
DEMA (Double EMA): Provides a smoother, faster alternative to the single EMA.
HMA (Hull MA): Optimized for reducing lag while maintaining a smooth curve.
VWMA (Volume Weighted): Weights the trend by volume, showing where the "smart money" is moving.
2. Signal Engine & Momentum Streaks
The indicator looks for two primary signals:
The Crossroad: A classic crossover between the Fast and Slow MAs.
Momentum Streaks: Identifies "3-bar power moves" (3 consecutive higher closes or lower closes). These often precede or confirm a crossover, allowing for earlier entries or trend-reinforcement.
3. Smart Visuals & Label Management
ATR-Based Offsets: Labels are dynamically positioned based on current market volatility (ATR). This prevents "price clutter," ensuring labels remain visible above or below candles regardless of the asset's price.
Slope-Based Coloring: MA lines change color based on their internal slope (Bullish vs. Bearish), providing instant visual feedback on momentum shifts before a cross actually occurs.
Clean Charting: Use the Label Count Limit to prevent your chart history from becoming bogged down with old signals.
4. Integrated Intelligence Alerting
The alert system is designed for professional use. Instead of a simple "Cross Up," the webhook or popup provides a detailed report:
Trend Bias: Identifies if the current price is above/below the slow MA.
Volume Context: Automatically detects if the signal is occurring on high relative volume.
Signal Specifics: Tells you exactly which MA types crossed and if a momentum streak was detected.
How to Trade with this Indicator
The Core Setup: Look for a ZLEMA (Fast) cross over an EMA (Slow) for a balance of speed and stability.
Confirmation: Wait for a Momentum Streak alert in the direction of the crossover to confirm high-probability continuation.
Trend Riding: Stay in the trade as long as the MA Slope Color remains consistent with your direction.
Settings Glossary
Fast/Slow MA Type: Choose your calculation algorithm.
ATR Mult (Label Offset): Increase this if labels are too close to the candles.
Label Count Limit: Limits the number of labels kept on the chart to improve performance.
EMA Slope Filter (ATR Threshold) + Supertrend WindowEMA Slope Filter (ATR Threshold) + Supertrend Window
This indicator highlights “trade-allowed” segments based on a mechanical EMA slope condition. It compares the current EMA value (user-defined length) to the EMA value N bars ago (user-defined lookback). A direction is allowed only if the EMA change exceeds an ATR-based threshold: ATR multiplier × ATR(length).
What it shows on the price chart
Green segments (background / EMA color / optional dots): long bias allowed.
Red segments: short bias allowed.
Neutral (gray/no background): filter not satisfied.
Start markers
L / S labels appear at the start of a new allowed segment.
Optional Supertrend delay: start labels can be delayed by X bars after a Supertrend direction switch (Supertrend ATR length and factor are configurable inside the script).
“STOP” wave marker
Define a Supertrend-based search window (e.g., bars 3…20 after a switch).
If the EMA slope filter never aligns with the Supertrend direction within that window, the script prints a STOP label on bar (max+1) to indicate the current wave is considered non-tradable (do not search for entries until the next Supertrend switch).
Extras
Key values (EMA diff, ATR, threshold, diff/ATR, bars since ST switch) are available in the Data Window for quick inspection.
CTR Weekly MA + 1D MA (improved)This does what the previous version does but more. I've added color candles to match the three weekly MAs. It helps show the stronger pullback as it goes deeper into each of the 3 weekly MAs and once the pullback is over and price goes back above or below the lowest or highest MA (depending on whether you are trading in a bear market or bull market) the candle colors will turn bright green or bright red.
CTR Weekly MA + 1D MA (v1)I built this simple pine script to help me trade on the lower timeframe (1d) while still showing my key weekly moving averages to help me trade with the macro trend.
Rules for trading...
Steps for taking a Short position:
1. Wait for all 3 weekly moving averages to be in alignment (8EMA<21SMA<50SMA). When these aligned the candles will change to bright red, meaning bearish.
2. Wait for a pullback to the 1 Day 21SMA. When a candle touches the 21SMA, that candle will change color to white. This will be your alert to get ready to enter into a short.
3. On the next candle you can then take a short position as long as that candle is below the 21SMA, if not, wait for the net daily candle to close. If that is below the 21SMA you can then enter into a short on the opening of the next daily candle.
I built this to trade the Bear Market but this same method can also work in a Bull Market but just do the opposite.
Regular & Dollar Volume (+ projected volume, HVE, bar coloring)Regular & Dollar Volume shows standard or dollar-weighted volume with fast and slow volume averages, projected volume for the live bar, and optional high-volume and percentile spike cues. An optional bar coloring feature reflects direction and volume strength so high-participation moves stand out without clutter.
Main features
- Dollar volume option with selectable price source (Close, Open, High, Low, HL2, HLC3, OHLC4).
- Fast and slow volume averages (SMA or EMA) for quick context.
- The fast average reacts quickly to recent volume, while the slow average represents the broader baseline.
- Bars are classified based on whether volume is above both averages, below both, or between them. This gives a simple three-state read: unusually strong volume (above both), weak volume (below both), or normal (in between).
- Using two averages avoids overreacting to a single spike while still highlighting real regime shifts in participation.
- Projected volume on the active bar to estimate end-of-bar volume.
- High Volume Ever (HVE) labeling and optional HVE bar coloring .
- Optional percentile spike detection with markers, threshold line, and bar highlighting.
- Optional candle recoloring to match volume bar colors .
- Bar colors reflect both direction (up vs down) and volume strength relative to the two averages.
- This helps you spot high-participation moves at a glance and distinguish strong pushes from low-energy drift.
CTR Weekly MA TradingI built this simple pine script to help me trade on the lower timeframe (1d) while still showing my key weekly moving averages to help me trade with the macro trend.
Rules for trading...
Steps for taking a Short position:
1. Wait for all 3 weekly moving averages to be in alignment (8EMA<21SMA<50SMA). When these aligned the candles will change to bright red, meaning bearish.
2. Wait for a pullback to the 1 Day 21SMA. When a candle touches the 21SMA, that candle will change color to white. This will be your alert to get ready to enter into a short.
3. On the next candle you can then take a short position as long as that candle is below the 21SMA, if not, wait for the net daily candle to close. If that is below the 21SMA you can then enter into a short on the opening of the next daily candle.
I built this to trade the Bear Market but this same method can also work in a Bull Market but just do the opposite.
