始めましょう

Newyork

EdgeMatrix SessionsEdgeMatrix Sessions EdgeMatrix Sessions marks the high and low range of the four major trading sessions directly on your chart using real time boxes. The four sessions covered are Asia, London, New York and Sydney. Each box starts drawing at the open of the session and expands automatically as price makes new highs or lows within that session window. When the session closes the box stays on the chart as a permanent reference level. This gives you a clear visual record of where price was accepted during each major session which many traders use as reference points for identifying areas of interest, planning entries or placing targets and stops. Session times are fully adjustable and a UTC offset input lets you align the sessions to your local time or broker time. Each session has its own color and name and can be toggled on or off independently. The indicator works on any market including Forex, Crypto, Futures and Indices and on any timeframe. This script is open source. You are free to use and build on it.
Pine Script® インジケーター
niicksfxの投稿
VWAP Dashboard Globex RTH Multi AssetsDashboard shows 3 assets and what is the current price location in relation to each Globex (full day or overnight) VWAP and the RTH (New York) VWAP. It will also show whether it is inside the Std Dev Bands +-1 (In Value) otherwise it will give the points distance outside in the EXT column. The Dist column shows the distance from the VWAP to the total current price location, not just to the outer band on the other VWAPs I've published. There is a arrow that shows the direction price is currently compared to each VWAP. Default assets are NQ, ES and YS Futures.
Pine Script® インジケーター
CzechMate06の投稿
ALN Sessions [NQ Stats x CantoLab]A statistical tool for NQ intraday traders built around research from NQ Stats (NQStats on twitter / nqstats.com ). Credit to NQ Stats for the original concept and data — published here as an open source indicator with permission. Introduction This indicator visualizes Asia and London session ranges on NQ (NASDAQ futures), then overlays statistically-derived probability levels showing how likely price is to sweep each session's high or low — based on historical pattern data compiled by NQ Stats. How to Read the Probability Numbers When London session closes, two horizontal lines appear — one above (London High) and one below (London Low) — each labeled with a percentage like 81.1% or 74.9%. These numbers answer: "Historically, how often does price return to sweep this level after London closes?" For example, if you see 81.1% on the high line, it means: in roughly 8 out of 10 historical sessions matching this pattern, price eventually traded back up to or through the London High What happens when a level is hit? The label updates to show in blue — confirming that level was reached The other line's probability updates to a new conditional probability, e.g. 46% , shown in brackets This delta tells you how the odds of sweeping the second level changed now that the first was reached The Four Patterns (Asia vs London relationship) The probabilities change depending on how London's range relates to Asia's range that day. The indicator detects four patterns automatically: London Engulfs Asia — London trades both above AND below Asia's range. The most expansive session structure. Asia Engulfs London — Asia's range fully contains London's range. London consolidates inside the prior overnight range. London High Break — London breaks only above Asia's high, leaving Asia's low intact. London Low Break — London breaks only below Asia's low, leaving Asia's high intact. Each pattern has its own set of historical probabilities, so the percentages you see are always contextual to that day's Asia/London relationship — not a fixed number. Settings Asia Session — color, session time window, and label text London Session — color, session time window, and label text Label Size — Tiny / Small / Normal / Large Border — toggle, style (Solid/Dashed/Dotted), and width for session boxes Probability Lines — toggle, Auto color or manual color pick, style (Solid/Dashed/Dotted), and width Daily Dividers — toggle, color, style (Solid/Dashed/Dotted), and width Notes Built for NQ Futures. Behaviour on other instruments is untested All times are New York time Probability data is derived from 10 years of NQ historical data by nqstats.com This indicator does not provide financial advice or a complete strategy. You are responsible for how you build around and execute on this data ⚠️ Important This is a statistical study indicator. It does not guarantee that the London high or low will be hit. Over a large sample, this is the expected behaviour based on 10 years of NQ data. It is best combined with other confluences to confirm direction — this indicator alone is not a strategy.
Pine Script® インジケーター
CantoLabの投稿
4
Session Reaction Map [AGPro Series]Session Reaction Map 🔷 OVERVIEW Session Reaction Map is a premium intraday study that maps how price reacts to the most important daily and weekly reference levels right at the opens of the Asia, London and New York sessions. Each session open is evaluated inside a fixed measurement window, and the resulting reaction is broken down into four dimensions: dominant move, close follow-through, wick rejection and counter-move penalty. The output is a single 0-100 reaction score that is then translated into tier-coded labels, premium reaction zones, an active reference band and a compact status panel, so you can instantly read what happened at each session open without scrolling through candles. The indicator is designed for discretionary traders, systematic traders, SMC and price action practitioners who want a clean, consistent and quantitative way to read session open behaviour around PDH, PDL, PDM, Daily Open and Weekly Open. Reactions are drawn as directional zones (bull zones above the reference and bear zones below), with up or down pointing labels centered on the reaction, so orientation is always unambiguous. 🧭 UNIQUE EDGE Most session open tools only mark time windows or highlight levels. Session Reaction Map goes further and quantifies the quality of the reaction itself. Four independent dimensions are measured against a fixed ATR-normalized baseline, and the final score determines not only whether a label is shown but also how prominent it is. Elite scores (80+) get the strongest visuals; strong scores (70-79) get a slightly softer treatment; watch scores (55-69) are coded as caution; anything below 55 is filtered out by default. This separation between detection (a session open near a reference) and evaluation (the reaction quality score) is the core edge. It lets you focus only on the best intraday reactions and discard noise automatically, while still being able to audit every component by adjusting the ATR length, touch tolerance, evaluation window and score thresholds. ⚙️ METHODOLOGY Session detection uses the chosen timezone and three session windows (Asia, London, New York), each with its own editable open range. When a session open occurs, the script checks whether the open price is within an ATR based touch tolerance of any enabled reference level (Previous Day High, Previous Day Low, Previous Day Mid, Daily Open or Weekly Open). If so, a reaction window is engaged on that bar and tracked for a configurable number of bars. During the reaction window, the live zone, reference band and dashed reference line are updated in real time. When the window completes, the final score is computed as: • Dominant move score (up to 45 points) - scaled against 1.20 x ATR • Close follow-through score (up to 30 points) - scaled against 0.90 x ATR • Wick rejection score (up to 15 points) - scaled against 0.50 x ATR • Counter-move penalty (up to -20 points) - scaled against 1.00 x ATR The sum is clamped into the 0-100 range and mapped into four tiers: Elite, Strong, Watch and Weak. The dominant direction of the reaction (up or down) is determined by comparing the upside excursion from the reference to the downside excursion from the reference during the window. 🎯 SIGNALS AND VISUALS • Reaction zones - rectangular areas connecting the reference level with the reaction extreme, tier-coded by score and bias • Active reference band - a thin accent band around the current reference level during a live reaction window • Dashed reference line - marks the exact reference price while the reaction is being measured • Tier-coded labels - up-pointing labels below bullish reactions and down-pointing labels above bearish reactions, centered on the reaction window • Session dots - small colored markers that optionally display only on valid events, keeping the chart clean • Active measurement highlight - an ultra-soft background shade on bars inside a live reaction window Labels use a ring buffer overlap check, so dense multi-session conditions do not pile labels on top of each other. When two labels would visually conflict, the higher-scored reaction wins. 🛠️ KEY INPUTS Sessions - enable/disable and edit Asia, London and New York session windows, each with its own color and timezone. Reference Levels - individually toggle PDH, PDL, PDM, Daily Open and Weekly Open. Reaction Logic - ATR length, touch tolerance in ATR, evaluation bars, label score filter, minimum label score, overlap reduction (bars and vertical ATR gap). Visuals - show/hide reference levels, session dots, dots only on valid events, reaction zones, minimum score for zones, zone transparency and extension, live reaction zone, active reference band with its ATR size and transparency, active measurement highlight, level width, label size, label offset in ATR and label background transparency. Panel - show/hide, position (six anchor points), Dark or Light theme, font size, optional guide row. All numerical inputs carry professional English tooltips explaining their role, so the script can be tuned for any symbol, timeframe and trading style. 📘 HOW TO USE 1. Apply the script on an intraday timeframe. It is designed for intraday use and will stay passive on daily/higher timeframes. 2. Recommended starting timeframe is 4H for swing intraday context, and 1H for tactical intraday work. Lower timeframes (15m, 30m) work too but may produce dense output. 3. Start with the default settings. Observe which sessions and which reference levels generate the most Elite and Strong reactions on your symbol. 4. Use the panel to monitor the current state: last session, last reference, bias, score, tier, label filter, zone filter and the active reaction status. 5. Treat Elite (80+) and Strong (70-79) reactions as the main signals. Watch tier is informative and Weak tier is generally discarded. 6. Align with your own confluence: higher timeframe bias, structure, orderflow, or whatever your primary framework is. The script does not issue buy or sell calls - it scores reactions, and you decide. ⚠️ LIMITATIONS AND TRANSPARENCY • This is not a strategy and does not place orders. No backtest statistics are implied. • Reaction scores are computed after the evaluation window completes, so they are not repainting but are confirmed with a lag equal to the evaluation window size. • The live reaction zone updates during the window and is finalized when the window closes. • Session behavior varies significantly by symbol (crypto vs FX vs equities) and by volatility regime. Inputs should be tuned per symbol. • Daily and Weekly references use standard request.security with barmerge.lookahead_off to avoid look-ahead bias. • The script is not a forecasting tool. It is a post-event quantification of how price has just reacted to a known reference level. 🛡️ RISK DISCLOSURE Trading involves substantial risk. Past reactions, patterns, zones or scores do not guarantee future performance. This script is provided for educational and analytical purposes only and is not financial advice. Always combine any tool with your own research, a defined risk plan and proper position sizing. You are solely responsible for your trading decisions.
Pine Script® インジケーター
AGProLabsの投稿
ICT Killzones & Pivots [TFO] - Traditional Chinese VersionICT 殺戮區與樞紐點 — 繁體中文版 ICT Killzones & Pivots — Traditional Chinese Edition 📌 概述 | Overview 本指標為廣受交易者使用的「ICT Killzones & Pivots 」之繁體中文本地化版本，完整保留原版所有功能，並將全部介面文字、設定選單、標籤與警報訊息翻譯為繁體中文，大幅降低中文使用者的操作門檻。 This is a Traditional Chinese localization of the well-known "ICT Killzones & Pivots " indicator. All original functionalities are fully preserved, with every interface element — including settings panels, labels, and alert messages — translated into Traditional Chinese to improve accessibility for Mandarin-speaking traders. 🕐 殺戮區（Killzones）| Session Killzones 根據 ICT（Inner Circle Trader）概念，機構資金最活躍的時段稱為「殺戮區」。本指標預設標記以下五個關鍵時段（以紐約時間為基準）： Based on ICT (Inner Circle Trader) concepts, the periods of highest institutional activity are known as "Killzones." The following five key sessions are marked by default (New York time): 時段 Session時間 Time (ET)🔵 亞洲盤 Asia20:00 – 00:00🔴 倫敦盤 London02:00 – 05:00🟢 紐約早盤 NY AM09:30 – 11:00🟡 紐約午休 NY Lunch12:00 – 13:00🟣 紐約下午盤 NY PM13:30 – 16:00 每個時段皆可個別啟用／停用，並自訂名稱與顏色。 Each session can be individually toggled, renamed, and color-customized. 📐 核心功能 | Core Features 殺戮區方塊 | Session Boxes 以半透明色塊標示各殺戮區範圍，清晰呈現每個時段的高低點震盪區間。 Translucent boxes highlight each killzone's high-to-low range, providing a clear visual of intraday price structure. 樞紐點線 | Pivot Lines 自動標記每個殺戮區結束後的最高點與最低點，並在未被突破前持續延伸，協助識別關鍵支撐與壓力位。 Automatically marks the high and low of each completed killzone session. Lines extend until the level is mitigated, helping identify key support and resistance. 中間點 | Midpoint Lines 可選擇顯示每個殺戮區的50%均衡價位，常作為潛在回撤目標。 An optional display of the 50% equilibrium level within each killzone, commonly used as a retracement target. 振幅統計表 | Range Table 即時顯示各殺戮區的當前振幅與歷史平均振幅，協助評估當日市場波動性。 A real-time table displaying the current and historical average range of each killzone, useful for assessing daily market volatility. 日／週／月開盤線與高低點 | D/W/M Open & High/Low Lines 標記日、週、月級別的開盤價、前高與前低，提供多時間框架的重要參考價位。 Marks the open price and prior high/low for daily, weekly, and monthly timeframes as key multi-timeframe reference levels. 開盤價格線 | Custom Opening Price Lines 最多支援8條自訂時間的水平開盤線，可自行設定任意時間點（如真實日開盤00:00、倫敦開盤等）。 Up to 8 custom horizontal open price lines, configurable for any time (e.g., True Day Open at 00:00, London open, etc.). 星期標籤 | Day-of-Week Labels 在圖表底部或頂部自動顯示星期幾標籤，輔助辨識每日結構。 Automatically displays day-of-week labels at the top or bottom of the chart to assist with daily structural analysis. 時間戳記線 | Timestamp Vertical Lines 最多可設定4條自訂垂直時間線，標記任意重要時間節點（如經濟數據公布時間、特定開盤時間等）。 Up to 4 custom vertical timestamp lines to mark important time events such as economic releases or specific session opens. 突破警報 | Break Alerts 當價格突破殺戮區樞紐高低點，或日／週／月高低點時，自動觸發 TradingView 警報通知。 Automatically triggers TradingView alerts when price breaks through killzone pivot levels or D/W/M high/low levels. ⚙️ 主要設定 | Key Settings 繪圖保留天數：控制圖表上各類繪圖的最大顯示筆數 時間框架上限：超過指定時間框架後自動隱藏所有繪圖 時區：支援全球主要時區，預設為紐約時間 繪圖截止時間：可設定樞紐線與開盤線的自動停止延伸時間 樞紐延伸模式：「直到被突破」或「突破後繼續」兩種模式可選 Session Drawing Limit: Controls the maximum number of drawings retained on the chart Timeframe Limit: Automatically hides all drawings above the specified timeframe Timezone: Supports all major global timezones, defaulting to New York (ET) Drawing Cutoff Time: Optionally stops pivot and open lines from extending at a set time Pivot Extension Mode: Choose between "Until Mitigated" or "Past Mitigation" 🌐 本地化說明 | Localization Notes 本版本為原作者 @tradeforopp 所著「ICT Killzones & Pivots 」之繁體中文翻譯版，依據 Mozilla Public License 2.0 授權發佈。所有交易邏輯、核心演算法與功能設計之著作權均歸屬於原作者。本版本僅對使用者介面文字進行在地化處理，未更動任何核心程式邏輯。 This is a Traditional Chinese translation of "ICT Killzones & Pivots " originally authored by @tradeforopp, published under the Mozilla Public License 2.0. All trading logic, core algorithms, and functional design remain the intellectual property of the original author. This version only localizes the user interface text without modifying any core logic. ⚠️ 免責聲明 | Disclaimer 本指標僅供技術分析參考用途，不構成任何投資建議。交易涉及風險，請依據個人風險承受能力審慎決策。 This indicator is provided for technical analysis reference purposes only and does not constitute investment advice. Trading involves risk; please make decisions according to your own risk tolerance. 原始腳本 Original Script：ICT Killzones & Pivots by @tradeforopp 授權 License：Mozilla Public License 2.0
Pine Script® インジケーター
wei01210826の投稿
FOREXSOM | Custom Time High & LowThis indicator plots the high and low of a user-defined intraday candle based on a selected time and timezone. It provides a structured way to observe how price reacts around specific moments during the trading session by marking the range of a chosen candle. How it works The script checks each bar against the selected hour and minute using the chosen timezone. When the specified time occurs, it captures that candle’s high and low and draws horizontal levels on the chart. These levels can optionally extend forward to act as reference levels for the remainder of the trading day. Features Customizable hour and minute selection Timezone input with automatic adjustment High and low levels drawn from the selected candle Optional extension of levels forward Automatic reset at the start of each new trading day Minimal and clean chart output Use cases Identifying the range of session opens (e.g., New York or London) Observing how price interacts with specific intraday candles Creating consistent reference levels for analysis Notes Designed for intraday timeframes The script does not generate trading signals or predictions Levels are based solely on historical price data from the selected candle About this script This script focuses on isolating a single candle in time and displaying its range in a consistent and repeatable way. Its purpose is to simplify the process of tracking specific intraday reference levels without adding unnecessary elements to the chart. Disclaimer This indicator is provided for informational and educational purposes only. It does not constitute financial advice. Users should perform their own analysis before making trading decisions.
Pine Script® インジケーター
FOREXSOMの投稿
1
Sessions ExtendedSessions Extended Based on the original "Sessions" indicator by LuxAlgo, this script is a complete rewrite and substantial expansion. It is built for traders who want control over session visualization, deep volume analytics, and a live dashboard that works on any chart timeframe from 1 minute up to 1 week. ============================================================================= WHAT CHANGED COMPARED TO THE ORIGINAL "SESSIONS" INDICATOR ============================================================================= SESSIONS Original: 4 fixed sessions (New York, London, Tokyo, Sydney) Extended: 11 fully independent sessions labeled A through K, each with its own complete settings group. The default setup covers the major forex windows: Asia, London, New York, Sydney, Tokyo I, Hong Kong, Singapore I, Tokyo II, Singapore II, EU pre-London, and US pre-NY. PER-SESSION STYLING Original: One shared background color and transparency, border always dotted, no width control. Extended: Per-session background color and transparency, fully independent of the border color. Per-session border style (Dotted / Dashed / Solid) and border width (1 to 4 pixels). Every session box can have a completely unique appearance. SESSION LABELS Original: One fixed label per session, always tiny, always at the session high. Extended: Per-session label color and size (Tiny / Small / Normal / Large / Huge). A numeric "Name Offset" input shifts the label upward by a chosen number of blank lines, keeping label height constant regardless of zoom level. An optional second label shows the actual session open and close times in HH:mm format with its own independent offset, color, and size. OVERLAYS PER SESSION Each of the 11 sessions independently supports seven overlay types: Range Box — High/Low box drawn for each session occurrence Trendline — Linear regression line (best-fit straight line through closes) Std Band — Dashed lines at +1σ and -1σ around the regression line. Works independently — Trendline does not need to be active. Bars outside the bands indicate unusual price movement. Mean — Cumulative average of all closing prices within the session, drawn as a connected line. Equal weight per bar, no volume influence. See "Understanding Mean vs VWAP" below. VWAP — Volume-Weighted Average Price. Institutional benchmark. See "Understanding Mean vs VWAP" below. Max/Min — Short horizontal tick marks at session High and Low Midpoint — Horizontal line at the 50% level of the session High/Low range EXTENDED HIGH/LOW LINES Each session can project its previous High and Low as horizontal lines extending to the right of the chart — classic support and resistance reference levels. Fully configurable per session: - Line color (independent from the session border color) - Line style: Solid, Dashed, or Dotted - Line width: 1 to 4 pixels - Optional end-of-line label showing session name and date (dd.MM.yy) - Label text color, background color, and background transparency A global "Max Extended H/L Lines" setting (Range Settings group, default 10) caps the total number of line pairs visible across all sessions combined. DAYS BACK FILTER Each session has a "Last N sessions" input. When set to 0 (default), all available history is shown. When set to 1–50, only the N most recent occurrences are drawn. The pruning applies consistently to boxes, labels, Max/Min lines, Midpoint lines, Mean lines, VWAP plots, and Extended H/L lines. TIMEZONE A "Use Exchange Timezone" checkbox follows the exchange timezone automatically (syminfo.timezone). When unchecked, a UTC Offset field (−12 to +14) enables manual adjustment. This is particularly useful for handling Daylight Saving Time transitions without needing to touch any session time strings. ============================================================================= THE DASHBOARD — COMPLETE REFERENCE ============================================================================= ENABLING AND POSITIONING Find the Dashboard group in Settings. Toggle "Show Dashboard" to show or hide the panel. Choose from four positions (Top Left, Top Right, Bottom Left, Bottom Right) and four sizes (Tiny, Small, Normal, Large). DASHBOARD MODES The dashboard has three display modes, selected via the "Volume & Sigma columns" and "Show Buy/Sell Volume" toggles: Standard mode (both off): Session | Trend Advanced mode (Volume & Sigma on): Session | Volume | Sigma | Trend Advanced + Buy/Sell mode (both on): Session | Volume | Sigma | ▲Buy ▼Sell | Trend COLUMN DESCRIPTIONS Session The session name (e.g. ASIA, LONDON, NEW YORK). The cell background changes color to reflect the session state: Active background color — session currently open Inactive background color — session closed today (snapshot visible) Dimmed border color — session not yet started today or yesterday data Volume Total traded volume for the session's measurement window. Updates live while the session is open. Freezes as a snapshot when it closes. Calculated at 1-minute resolution via request.security — accurate on any chart timeframe. Sigma (σ) Standard deviation of closing prices within the session. Measures how much price spread around its average. A high Sigma indicates a volatile, wide-ranging session. A low Sigma indicates tight, consolidating price action. Updates live, freezes on session close. ▲Buy ▼Sell (optional, "Show Buy/Sell Volume") Volume split by bar direction. Up-bars (Close ≥ Open) count as buy volume, down-bars count as sell. Note: this is an approximation — Pine Script cannot access TradingView's internal tick-level buy/sell data. Open / High / Low (optional, "Show O/H/L + Change") The session's opening price, highest traded price, and lowest traded price. These are permanent historical facts and remain visible (dimmed) even after the session closes and after the trading day resets. Chg (optional, "Show O/H/L + Change") The change from session Open to session Close: Close − Open. Display format: +1.234 green — session closed above its open (bullish) -1.234 red — session closed below its open (bearish) ±0.000 grey — session closed exactly at its open (neutral) The three colors (up, down, flat) are independently configurable. Trend (r²) The R-squared value of the linear regression for the session. Ranges from −1.00 to +1.00. Positive values indicate an upward trend, negative values a downward trend. Values near 0 indicate a sideways/choppy session. The cell background is colored green (bullish) or red (bearish) based on the sign, making trend direction scannable at a glance. Timer (optional, "Show Timer column") Countdown to the next relevant session event: ▼ HH:MM — session is currently open, counting down to close ▲ HH:MM — session is closed, counting up to next open ▲ Xd HH:MM — session opens in more than 24 hours (e.g. weekend gap) The timer is updated in real time using timenow. It is visible at all times, including when the market is closed. Weekend gaps are handled correctly: sessions that open Monday morning show 2d+ on Friday evening, while sessions still opening later on Friday show the same-day countdown. The timer text is colored with the active session color when open, or dimmed when the session is waiting to open. DAY TOTAL ROW When one or more sessions have "In Day Total" checked in their settings, a Day Total row appears at the bottom of the dashboard. It shows: - The sum of all Volume values from today's In-Day-Total sessions - The average Sigma across those sessions Critically , Day Total counts only sessions that have actually run since the last anchor-session reset — not yesterday's data. If ASIA (the default anchor) opened at 18:00 EST and New York has not yet run today, New York's data from the previous day will appear in its row (dimmed) but will not be included in Day Total. YESTERDAY ROW When all sessions have closed, a Yesterday row appears showing the prior trading day's totals for comparison. This row disappears once the new trading day begins. STALE DATA — THREE BRIGHTNESS LEVELS The dashboard uses text brightness to communicate data age at a glance: Full brightness — session is currently active (live data) Dimmed — session ran and closed today (today's snapshot) More dimmed — session has data from the previous day (no run today yet) Near-invisible — session has no data at all (never run or newly enabled) The dim percentage is configurable ("Stale data text dim", 0–90%). RESET LOGIC — HOW THE TRADING DAY IS DEFINED The dashboard needs to know when a new trading day begins. This is controlled by "Reset Stats when Session starts" in the Dashboard group (default: A = ASIA). When the selected anchor session opens: - All "ran today" tracking flags are cleared - Day Total recalculates from zero - Sessions not yet run show their previous data dimmed until they run again Snapshot data inside each session's measurement function persists until the session runs again and overwrites it. This means US pre-NY data from 08:30 yesterday is still visible in the dashboard at 04:00 today, correctly dimmed, and correctly excluded from Day Total. VOLUME MEASUREMENT WINDOW Each session has a separate "Vol window" session input. By default this matches the display session, but you can narrow it. For example, you could display the full 18-hour ASIA box but only measure volume for the first two hours of activity. The Vol window does not affect the displayed box or overlays — it only affects Volume, Sigma, Buy/Sell, and Trend statistics. DASHBOARD COLORS (configurable) Active cell background — highlight color for currently open sessions Inactive cell background — color for closed sessions with today's data Text color — all non-highlighted cell text Border color — table grid lines Background — dashboard panel fill and transparency Change Up / Down / Flat — three independent colors for the Chg column Stale data dim % — how strongly to dim closed and yesterday data ============================================================================= UNDERSTANDING MEAN vs VWAP ============================================================================= Mean is the simple average of all closing prices within the session: (Close₁ + Close₂ + ... + Closeₙ) / N Every bar contributes equally regardless of how much was traded. Mean shows the geometric center of price over time — a neutral, unweighted reference. VWAP (Volume Weighted Average Price): Σ(Close × Volume) / Σ(Volume) Bars with high volume pull the VWAP toward them. Institutions use VWAP as the primary benchmark for execution quality. A price above VWAP signals that the session is running bullish on a volume-weighted basis; below is bearish. The practical difference: when a sharp directional move occurs on thin volume, Mean shifts significantly because it counts each bar equally. VWAP barely reacts because little volume participated in the move. This divergence — Mean far from VWAP — can itself be a signal that the move lacks conviction. ============================================================================= DEFAULT SESSION CONFIGURATION (UTC-5 / New York EST) ============================================================================= A ASIA 18:00 – 02:00 In Day Total, Anchor Reset (enabled) B LONDON 02:00 – 08:00 In Day Total (enabled) C NEW YORK 08:00 – 17:00 In Day Total (enabled) D Sydney 18:00 – 00:00 (enabled) E Tokyo I 19:00 – 21:30 (enabled) F Hong Kong 20:30 – 03:00 (enabled) G Singapore I 20:00 – 23:00 (enabled) H Tokyo II 22:30 – 01:00 (enabled) I Singapore II 06:00 – 10:00 (enabled) J EU pre-Lon 02:00 – 03:00 (enabled) K US pre-NY 08:00 – 09:30 (enabled) All times are in UTC-5 (New York EST). Adjust the UTC Offset setting or enable "Use Exchange Timezone" to match your local time. Sessions H through K are disabled by default. Enable them in their respective settings group. Note that newly enabled sessions will show no data until they have run at least once after being activated. ============================================================================= SETUP GUIDE — GETTING STARTED ============================================================================= Step 1 — Timezone Open Settings → Timezone. If your instrument uses the exchange timezone natively, enable "Use Exchange Timezone". Otherwise set UTC Offset to your local offset (e.g. -5 for New York EST, +1 for Berlin CET). If your region uses DST and TradingView does not adjust automatically, update this offset manually at DST transitions. Step 2 — Sessions Sessions A (ASIA), B (LONDON), and C (NEW YORK) are enabled by default with commonly used forex hours. Adjust the session time strings to match your instrument's actual active hours. Enable additional sessions (D through K) as needed from their settings groups. Step 3 — Dashboard Open Settings → Dashboard. Enable "Show Dashboard". Choose your preferred position and size. Enable "Volume & Sigma columns" for full statistics. Enable "Show Timer column" to see live countdowns. Configure which sessions should contribute to Day Total via the "In Day Total" checkbox in each session's group. Step 4 — Overlays For each session you want to analyze deeply, enable the overlays relevant to your strategy. Recommended starting set: Range Box (always on), VWAP for institutional context, Mean for a price-weighted counterpart, Std Band for volatility context. Step 5 — Extended H/L Lines Enable "Ext H/L" in any session group to project that session's previous High and Low forward as S/R references. Set "Max Extended H/L Lines" in Range Settings to a comfortable number (default: 10 pairs total). Step 6 — Days Back If your chart history is long and performance is slow, set "Last N sessions" in each session group to limit how many occurrences are drawn (e.g. 5 to 20). ============================================================================= ALERTS ============================================================================= 22 alert conditions are available — one "Session Start" and one "Session End" for each of the 11 sessions. Alerts fire only when the corresponding session's "Show" toggle is enabled. Set alerts via the Add Alert dialog in TradingView, selecting this indicator from the condition dropdown. ============================================================================= LIMITATIONS AND KNOWN BEHAVIOR ============================================================================= Buy/Sell volume approximation Up-bar (Close ≥ Open) = Buy volume. Down-bar = Sell volume. True tick-level data is not accessible in Pine Script. Treat this column as directional sentiment, not precise order flow. Initial load time 11 request.security calls at 1-minute resolution cause a delay when first applying the indicator to a chart with long history. This is a Pine Script constraint — the 1m resolution is required for accuracy on higher timeframes. request.security usage This script uses 12 of Pine Script's 40 allowed request.security calls (11 session functions + 1 anchor-reset detector), leaving 28 available if you build on top of this script. Short sessions on high timeframes Sessions shorter than the chart's bar duration (e.g. a 30-minute session on a 4H chart) may not be detected. Use a lower timeframe for short sessions. Timer and market holidays The countdown timer uses calendar arithmetic, not an exchange trading calendar. On public holidays the timer will count down to the session time as if it were a normal trading day. Weekend detection (Friday evening, Saturday) is handled correctly for standard Mon–Fri market hours. Dashboard layout Table positions are limited to the four corners as defined by Pine Script's table API. Sub-corner pixel positioning is not supported. ============================================================================= CREDITS ============================================================================= Original indicator: Sessions by LuxAlgo This derivative is an independent rewrite published under CC BY-NC-SA 4.0. creativecommons.org Commercial use is prohibited. Derivatives must carry the same license and credit the original work.
Pine Script® インジケーター
Wick-Sniperの投稿
Forex Sessions UTC + customise (DST Support)This Pine Script is designed to highlight forex trading sessions on a TradingView chart, showing which session (Asia, London, New York, Frankfurt, Sydney) is active based on your selected timezone offset and daylight saving time (DST) settings. It also includes an option to highlight session overlaps, like the London-New York and Asia-London overlaps. Let's break down the script in detail: ### 1. **Inputs**: * **`timezoneOffset`**: * This input allows you to select your local timezone offset in hours relative to UTC (e.g., -2 for UTC-2 or +3 for UTC+3). It helps adjust the session times based on your local time. * **`isDST`**: * A boolean input that determines if Daylight Saving Time (DST) is active or not. If DST is enabled, the session times will be adjusted by one hour. ### 2. **Function: `timeInDailyRange`**: This function checks if the current time (bar) is within a given session's start and end time. * **`startH, startM`**: Start time of the session (hours and minutes). * **`endH, endM`**: End time of the session (hours and minutes). * **`tzOffset`**: The timezone offset in hours (which adjusts the start and end times for different regions). The function handles sessions that cross over midnight. For example, the Asia session starts at 23:00 UTC and ends at 07:00 UTC, so it checks if the current time falls within that period. ### 3. **Session Times (in UTC)**: Each trading session has specific times defined in UTC: * **Asia Session**: 23:00 UTC to 07:00 UTC * **London Session**: 08:00 UTC to 16:00 UTC * **New York Session**: 13:00 UTC to 21:00 UTC * **Frankfurt Session**: 07:00 UTC to 15:00 UTC * **Sydney Session**: 21:00 UTC to 05:00 UTC These times are defined in 24-hour format, and they represent the opening and closing hours for each market. The script uses specific colors to represent different sessions: * **Asia**: Yellow (`asiaColor`) * **London**: Red (`londonColor`) * **New York**: Navy Blue (`nyColor`) * **Frankfurt**: Blue (`frankfurtColor`) * **Sydney**: Green (`sydneyColor`) * **Overlaps**: * London-NY overlap: Purple (`overlapLN`) * Asia-London overlap: Orange (`overlapAL`) These colors are used to highlight the background during active sessions. ### 5. **Session Highlighting**: The script uses the `bgcolor` function to change the background color of the chart when a session is active. * For each session, it checks whether the current time (bar) falls within the session's time range (adjusted by the `timezoneOffset`). * If a session is active, it will highlight the chart background in the corresponding session color. ### 6. **Overlaps**: * **London-NY Overlap**: The script checks if both the London session and the New York session are active at the same time (i.e., if their time ranges overlap). If so, it highlights the overlap area in purple. * **Asia-London Overlap**: Similarly, the script checks if both the Asia and London sessions are active at the same time, and if so, it highlights the overlap area in orange. ### 7. **Daylight Saving Time (DST) Adjustment**: * If the **`isDST`** flag is enabled (i.e., DST is active), the script adjusts the session start and end times by adding one hour to each session. This is because during DST, trading hours shift by one hour (usually in regions that observe DST). * This adjustment is applied to all session times, so the script accounts for the time change and ensures that the session times are correctly displayed. ### 8. **Final Background Color Logic**: * The `bgcolor` function checks whether each session is active by calling `timeInDailyRange` for each session and then colors the chart accordingly. * It also checks for overlapping sessions and colors the chart with the appropriate overlap color. ### Example Scenario: 1. **Timezone Offset**: If you select `timezoneOffset = 3` (UTC+3), the session times will be adjusted by adding 3 hours to the start and end times. 2. **Daylight Saving Time (DST)**: If `isDST = true` is selected, the session start times will shift by 1 hour forward (e.g., 23:00 UTC becomes 00:00 UTC for Asia). 3. **Visual Outcome**: The chart will display different colors in the background depending on which trading session is active (e.g., red for London, navy for New York), and purple or orange for overlap sessions. ### Key Features: * **Customizable Timezone Offset**: Adjust session times to reflect your local timezone. * **Daylight Saving Time Support**: Automatically adjusts session times during DST. * **Highlighting Sessions**: Color the chart background to visualize when different trading sessions are active. * **Overlap Highlighting**: Highlights the periods when certain sessions overlap (London-NY, Asia-London). In summary, this script is useful for traders who want to visually see when different forex trading sessions are active on the chart, with flexibility for timezone and DST adjustments.
Pine Script® インジケーター
essib91の投稿
Sesion Operativa - Codigo InstitucionalThis indicator is designed for institutional and precision traders who need to visualize market liquidity and key session operating ranges without visual clutter. Unlike standard session indicators, this tool focuses on clarity and the projection of key levels (Highs and Lows) to identify potential future reaction zones. Key Features: 4 Customizable Sessions: Pre-configured with key institutional times (Pre-NY, NY Open, London, and Asia). Each session is fully adjustable in time, color, and style. Minimalist Labeling: Displays the session name and operating range (in pips/points) in a clean, direct format (e.g., NY - 45), removing decimals and unnecessary text to keep the chart clean. Range Projections: Option to project the Highs and Lows of each session forward (N candles) to use them as dynamic support or resistance levels. Opening Highlight (NYSE): Special feature to highlight candle colors during specific high-volatility times (default 09:30 - 09:35 UTC-5), perfect for identifying manipulation or liquidity injections at the stock market open. Adjustable Time Zone: Default setting is UTC-5 (New York), but fully adaptable to any user time zone.
Pine Script® インジケーター
sebaztiansaenzXの投稿
SP500 Session Gap Fade StrategySummary in one paragraph SPX Session Gap Fade is an intraday gap fade strategy for index futures, designed around regular cash sessions on five minute charts. It helps you participate only when there is a full overnight or pre session gap and a valid intraday session window, instead of trading every open. The original part is the gap distance engine which anchors both stop and optional target to the previous session reference close at a configurable flat time, so every trade’s risk scales with the actual gap size rather than a fixed tick stop. Scope and intent • Markets. Primarily index futures such as ES, NQ, YM, and liquid index CFDs that exhibit overnight gaps and regular cash hours. • Timeframes. Intraday timeframes from one minute to fifteen minutes. Default usage is five minute bars. • Default demo used in the publication. Symbol CME:ES1! on a five minute chart. • Purpose. Provide a simple, transparent way to trade opening gaps with a session anchored risk model and forced flat exit so you are not holding into the last part of the session. • Limits. This is a strategy. Orders are simulated on standard candles only. Originality and usefulness • Unique concept or fusion. The core novelty is the combination of a strict “full gap” entry condition with a session anchored reference close and a gap distance based TP and SL engine. The stop and optional target are symmetric multiples of the actual gap distance from the previous session’s flat close, rather than fixed ticks. • Failure mode it addresses. Fixed sized stops do not scale when gaps are unusually small or unusually large, which can either under risk or over risk the account. The session flat logic also reduces the chance of holding residual positions into late session liquidity and news. • Testability. All key pieces are explicit in the Inputs: session window, minutes before session end, whether to use gap exits, whether TP or SL are active, and whether to allow candle based closes and forced flat. You can toggle each component and see how it changes entries and exits. • Portable yardstick. The main unit is the absolute price gap between the entry bar open and the previous session reference close. tp_mult and sl_mult are multiples of that gap, which makes the risk model portable across contracts and volatility regimes. Method overview in plain language The strategy first defines a trading session using exchange time, for example 08:30 to 15:30 for ES day hours. It also defines a “flat” time a fixed number of minutes before session end. At the flat bar, any open position is closed and the bar’s close price is stored as the reference close for the next session. Inside the session, the strategy looks for a full gap bar relative to the prior bar: a gap down where today’s high is below yesterday’s low, or a gap up where today’s low is above yesterday’s high. A full gap down generates a long entry; a full gap up generates a short entry. If the gap risk engine is enabled and a valid reference close exists, the strategy measures the distance between the entry bar open and that reference close. It then sets a stop and optional target as configurable multiples of that gap distance and manages them with strategy.exit. Additional exits can be triggered by a candle color flip or by the forced flat time. Base measures • Range basis. The main unit is the absolute difference between the current entry bar open and the stored reference close from the previous session flat bar. That value is used as a “gap unit” and scaled by tp_mult and sl_mult to build the target and stop. Components • Component one: Gap Direction. Detects full gap up or full gap down by comparing the current high and low to the previous bar’s high and low. Gap down signals a long fade, gap up signals a short fade. There is no smoothing; it is a strict structural condition. • Component two: Session Window. Only allows entries when the current time is within the configured session window. It also defines a flat time before the session end where positions are forced flat and the reference close is updated. • Component three: Gap Distance Risk Engine. Computes the absolute distance between the entry open and the stored reference close. The stop and optional target are placed as entry ± gap_distance × multiplier so that risk scales with gap size. • Optional component: Candle Exit. If enabled, a bullish bar closes short positions and a bearish bar closes long positions, which can shorten holding time when price reverses quickly inside the session. • Session windows. Session logic uses the exchange time of the chart symbol. When changing symbols or venues, verify that the session time string still matches the new instrument’s cash hours. Fusion rule All gates are hard conditions rather than weighted scores. A trade can only open if the session window is active and the full gap condition is true. The gap distance engine only activates if a valid reference close exists and use_gap_risk is on. TP and SL are controlled by separate booleans so you can use SL only, TP only, or both. Long and short are symmetric by construction: long trades fade full gap downs, short trades fade full gap ups with mirrored TP and SL logic. Signal rule • Long entry. Inside the active session, when the current bar shows a full gap down relative to the previous bar (current high below prior low), the strategy opens a long position. If the gap risk engine is active, it places a gap based stop below the entry and an optional target above it. • Short entry. Inside the active session, when the current bar shows a full gap up relative to the previous bar (current low above prior high), the strategy opens a short position. If the gap risk engine is active, it places a gap based stop above the entry and an optional target below it. • Forced flat. At the configured flat time before session end, any open position is closed and the close price of that bar becomes the new reference close for the following session. • Candle based exit. If enabled, a bearish bar closes longs, and a bullish bar closes shorts, regardless of where TP or SL sit, as long as a position is open. What you will see on the chart • Markers on entry bars. Standard strategy entry markers labeled “long” and “short” on the gap bars where trades open. • Exit markers. Standard exit markers on bars where either the gap stop or target are hit, or where a candle exit or forced flat close occurs. Exit IDs “long_gap” and “short_gap” label gap based exits. • Reference levels. Horizontal lines for the current long TP, long SL, short TP, and short SL while a position is open and the gap engine is enabled. They update when a new trade opens and disappear when flat. • Session background. This version does not add background shading for the session; session logic runs internally based on time. • No on chart table. All decisions are visible through orders and exit levels. Use the Strategy Tester for performance metrics. Inputs with guidance Session Settings • Trading session (sess). Session window in exchange time. Typical value uses the regular cash session for each contract, for example “0830-1530” for ES. Adjust if your broker or symbol uses different hours. • Minutes before session end to force exit (flat_before_min). Minutes before the session end where positions are forced flat and the reference close is stored. Typical range is 15 to 120. Raising it closes trades earlier in the day; lowering it allows trades later in the session. Gap Risk • Enable gap based TP/SL (use_gap_risk). Master switch for the gap distance exit engine. Turning it off keeps entries and forced flat logic but removes automatic TP and SL placement. • Use TP limit from gap (use_gap_tp). Enables gap based profit targets. Typical values are true for structured exits or false if you want to manage exits manually and only keep a stop. • Use SL stop from gap (use_gap_sl). Enables gap based stop losses. This should normally remain true so that each trade has a defined initial risk in ticks. • TP multiplier of gap distance (tp_mult). Multiplier applied to the gap distance for the target. Typical range is 0.5 to 2.0. Raising it places the target further away and reduces hit frequency. • SL multiplier of gap distance (sl_mult). Multiplier applied to the gap distance for the stop. Typical range is 0.5 to 2.0. Raising it widens the stop and increases risk per trade; lowering it tightens the stop and may increase the number of small losses. Exit Controls • Exit with candle logic (use_candle_exit). If true, closes shorts on bullish candles and longs on bearish candles. Useful when you want to react to intraday reversal bars even if TP or SL have not been reached. • Force flat before session end (use_forced_flat). If true, guarantees you are flat by the configured flat time and updates the reference close. Turn this off only if you understand the impact on overnight risk. Filters There is no separate trend or volatility filter in this version. All trades depend on the presence of a full gap bar inside the session. If you need extra filtering such as ATR, volume, or higher timeframe bias, they should be added explicitly and documented in your own fork. Usage recipes Intraday conservative gap fade • Timeframe. Five minute chart on ES regular session. • Gap risk. use_gap_risk = true, use_gap_tp = true, use_gap_sl = true. • Multipliers. tp_mult around 0.7 to 1.0 and sl_mult around 1.0. • Exits. use_candle_exit = false, use_forced_flat = true. Focus on the structured TP and SL around the gap. Intraday aggressive gap fade • Timeframe. Five minute chart. • Gap risk. use_gap_risk = true, use_gap_tp = false, use_gap_sl = true. • Multipliers. sl_mult around 0.7 to 1.0. • Exits. use_candle_exit = true, use_forced_flat = true. Entries fade full gaps, stops are tight, and candle color flips flatten trades early. Higher timeframe gap tests • Timeframe. Fifteen minute or sixty minute charts on instruments with regular gaps. • Gap risk. Keep use_gap_risk = true. Consider slightly higher sl_mult if gaps are structurally wider on the higher timeframe. • Note. Expect fewer trades and be careful with sample size; multi year data is recommended. Properties visible in this publication • On average our risk for each position over the last 200 trades is 0.4% with a max intraday loss of 1.5% of the total equity in this case of 100k $ with 1 contract ES. For other assets, recalculations and customizations has to be applied. • Initial capital. 100 000. • Base currency. USD. • Default order size method. Fixed with size 1 contract. • Pyramiding. 0. • Commission. Flat 2 USD per order in the Strategy Tester Properties. (2$ buying + 2$selling) • Slippage. One tick in the Strategy Tester Properties. • Process orders on close. ON. Realism and responsible publication • No performance claims are made. Past results do not guarantee future outcomes. • Costs use a realistic flat commission and one tick of slippage per trade for ES class futures. • Default sizing with one contract on a 100 000 reference account targets modest per trade risk. In practice, extreme slippage or gap through events can exceed this, so treat the one and a half percent risk target as a design goal, not a guarantee. • All orders are simulated on standard candles. Shapes can move while a bar is forming and settle on bar close. Honest limitations and failure modes • Economic releases, thin liquidity, and limit conditions can break the assumptions behind the simple gap model and lead to slippage or skipped fills. • Symbols with very frequent or very large gaps may require adjusted multipliers or alternative risk handling, especially in high volatility regimes. • Very quiet periods without clean gaps will produce few or no trades. This is expected behavior, not a bug. • Session windows follow the exchange time of the chart. Always confirm that the configured session matches the symbol. • When both the stop and target lie inside the same bar’s range, the TradingView engine decides which is hit first based on its internal intrabar assumptions. Without bar magnifier, tie handling is approximate. Legal Education and research only. This strategy is not investment advice. You remain responsible for all trading decisions. Always test on historical data and in simulation with realistic costs before considering any live use.
Pine Script® ストラテジー
exluxの投稿
3
Sessions Highs/LowsThis indicator plots the High and Low of the three main trading sessions: Asia (20:00–03:00) – green lines London (03:00–08:00) – blue lines New York (08:00–13:00) – red lines Features: Levels update in real time during each session. When a new session starts, the previous lines are deleted – only the latest active sessions remain visible. Default session times are set to Asia (20:00–03:00), London (03:00–08:00), and New York (08:00–13:00), but you can adjust them to your own custom hours in the settings. Colors can also be customized. Use cases: Quickly visualize session ranges. Track session highs/lows for breakouts, fakeouts, and reactions around liquidity zones.
Pine Script® インジケーター
kondrix15の投稿
Sessions Full Markets [TradingFinder] Forex Stocks Index 7 Time🔵 Introduction In global financial markets, particularly in FOREX and stocks, precise timing of trading sessions plays a crucial role in the success of traders. Each trading session—Asian, European, and American—has its own unique characteristics in terms of volatility and trading volume. The Asian session (Tokyo), Sydney session, Shanghai session, European session (London and Frankfurt), and American session (New York AM and New York PM) are examples of these trading sessions, each of which opens and closes at specific times. This session indicator also includes a Time Convertor, enabling users to view FOREX market hours based on GMT, UTC, EST, and local time. Another valuable feature of this indicator is the automatic detection of Daylight Saving Time (DST), which automatically applies time changes for the New York, London, and Sydney sessions. 🔵 How to Use The indicator also displays session times based on the exact opening and closing times for each geographic region. Users can utilize this indicator to view trading hours either locally or in UTC time, and if needed, set their own custom trading times. Additionally, the session information table includes the start and end times of each session and whether they are open or closed. This functionality helps traders make better trading decisions by using accurate and precise time data. Key Features of the Session Indicator The session indicator is a versatile and advanced tool that provides several unique features for traders. Some of these features are : • Automatic Daylight Saving Time (DST) Detection : This indicator dynamically detects Daylight Saving Time (DST) changes for various trading sessions, including New York, London, and Sydney, without requiring manual adjustments. This feature allows traders to manage their trades without worrying about time changes. Below are the start and end dates for DST in the New York, London, and Sydney trading sessions : 1. New York : Start of DST: Second Sunday of March, at 2:00 AM. End of DST: First Sunday of November, at 2:00 AM 2. London : Start of DST: Last Sunday of March, at 1:00 AM. End of DST: Last Sunday of October, at 2:00 AM. 3. Sydney : Start of DST: First Sunday of October, at 2:00 AM. End of DST: First Sunday of April, at 3:00 AM. • Session Display Based on Different Time Zones : The session indicator allows users to view trading times based on different time zones, such as UTC, the local time of each market, or the user’s local time. This feature is especially useful for traders operating in diverse geographic regions. • Custom Trading Time Setup : Another notable feature of this indicator is the ability to set custom trading times. Traders can adjust their own trading times according to their personal strategies and benefit from this flexibility. • Session Information Table : The session indicator provides a complete information table that includes the exact start and end times of each trading session and whether they are open or closed. This table helps users simultaneously and accurately monitor the status of all trading sessions and make better trading decisions. 🟣 Session Trading Hours Based on Market Mode and Time Zones The session indicator provides precise information on the start and end times of trading sessions. These times are adjusted based on different market modes (FOREX, stocks, and TFlab suggestions) and time zones (UTC and local time) : 🟣 (FOREX Session Time) Forex Market Mode • Sessions in UTC (DST inactive) : Sydney: 22:00 - 06:00 Tokyo: 23:00 - 07:00 Shanghai: 01:00 - 09:00 Asia: 22:00 - 07:00 Europe: 07:00 - 16:00 London: 08:00 - 16:00 New York: 13:00 - 21:00 • Sessions in UTC (DST active) : Sydney: 21:00 - 05:00 Tokyo: 23:00 - 07:00 Shanghai: 01:00 - 09:00 Asia: 21:00 - 07:00 Europe: 06:00 - 15:00 London: 07:00 - 15:00 New York: 12:00 - 20:00 • Sessions in Local Time : Sydney: 08:00 - 16:00 Tokyo: 08:00 - 16:00 Shanghai: 09:00 - 17:00 Asia: 22:00 - 07:00 Europe: 07:00 - 16:00 London: 08:00 - 16:00 New York: 08:00 - 16:00 🟣 Stock Market Trading Hours (Stock Market Mode) • Sessions in UTC (DST inactive) : Sydney: 00:00 - 06:00 Asia: 00:00 - 06:00 Europe: 07:00 - 16:30 London: 08:00 - 16:30 New York: 14:30 - 21:00 Tokyo: 00:00 - 06:00 Shanghai: 01:30 - 07:00 • Sessions in UTC (DST active) : Sydney: 23:00 - 05:00 Asia: 23:00 - 06:00 Europe: 06:00 - 15:30 London: 07:00 - 15:30 New York: 13:30 - 20:00 Tokyo: 00:00 - 06:00 Shanghai: 01:30 - 07:00 • Sessions in Local Time: Sydney: 10:00 - 16:00 Tokyo: 09:00 - 15:00 Shanghai: 09:30 - 15:00 Asia: 00:00 - 06:00 Europe: 07:00 - 16:30 London: 08:00 - 16:30 New York: 09:30 - 16:00 🟣 TFlab Suggestion Mode • Sessions in UTC (DST inactive) : Sydney: 23:00 - 05:00 Tokyo: 00:00 - 06:00 Shanghai: 01:00 - 09:00 Asia: 23:00 - 06:00 Europe: 07:00 - 16:00 London: 08:00 - 16:00 New York: 13:00 - 21:00 • Sessions in UTC (DST active) : Sydney: 22:00 - 04:00 Tokyo: 00:00 - 06:00 Shanghai: 01:00 - 09:00 Asia: 22:00 - 06:00 Europe: 06:00 - 15:00 London: 07:00 - 15:00 New York: 12:00 - 20:00 • Sessions in Local Time : Sydney: 09:00 - 16:00 Tokyo: 09:00 - 15:00 Shanghai: 09:00 - 17:00 Asia: 23:00 - 06:00 Europe: 07:00 - 16:00 London: 08:00 - 16:00 New York: 08:00 - 16:00 🔵 Setting Using the session indicator is straightforward and practical. Users can add this indicator to their trading chart and take advantage of its features. The usage steps are as follows : Selecting Market Mode : The user can choose one of the three main modes. Forex Market Mode: Displays the forex market trading hours. oStock Market Mode: Displays the trading hours of stock exchanges. Custom Mode: Allows the user to set trading hours based on their needs. TFlab Suggestion Mode: Displays the higher volume hours of the forex market in Asia. Setting the Time Zone : The indicator allows displaying sessions based on various time zones. The user can select one of the following options: UTC (Coordinated Universal Time) Local Time of the Session User’s Local Time Displaying Comprehensive Session Information : The session information table includes the opening and closing times of each session and whether they are open or closed. This table helps users monitor all sessions at a glance and precisely set the best time for entering and exiting trades. 🔵Conclusion The session indicator is a highly efficient and essential tool for active traders in the FOREX and stock markets. With its unique features, such as automatic DST detection and the ability to display sessions based on different time zones, the session indicator helps traders to precisely and efficiently adjust their trading activities. This indicator not only shows users the exact opening and closing times of sessions, but by providing a session status table, it helps traders identify the best times to enter and exit trades. Moreover, the ability to set custom trading times allows traders to easily personalize their trading schedules according to their strategies. In conclusion, using the session indicator ensures that traders are continuously and accurately informed of time changes and the opening and closing hours of markets, eliminating the need for manual updates to align with DST changes. These features enable traders to optimize their trading strategies with greater confidence and up-to-date information, allowing them to capitalize on opportunities in the market.
Pine Script® インジケーター
TFlabの投稿
16
B A N K $ - Advanced Session RangesThis is a simple indicator that has been designed to aid intraday trading and has a few components; Key Features Session Ranges + Optimal Exit Time Asia Pip Range New York Midnight Open Line Session Ranges + Optimal Exit Time Information ℹ️ This is a visual depiction of the 3 main sessions in the markets. Asia, London & New York. The default timings are set to perfectly align with each session however the Start & End times for each session can be changed in the settings. (I've added a website on the tooltip to easily convert timezones) I have also added a 4th session range called "Optimal Exit Time". This is statistically the most probable time window for the opposite High / Low of Day to form is within this window. It helps the trader understand when they should look to take profit. How It Works 🔑 The indicator automatically maps on two lines for the High & Low of the range between the selected Start & End time, it also colours the background. The individual lines & background can be toggled & customised to the traders preference. Asia Pip Range Information ℹ️ This displays the Asia Range in pips beneath the Asia Session Low. How It Works 🔑 This calculates the distance between the Asia High - Asia Low in pips. It will automatically recalibrate to the timings the trader sets in the settings if they change the Start / End. New York Midnight Open Line Information ℹ️ This helps look for Buys beneath the line for a Bullish Expansion day 📈 & Sells above the line for a Bearish Expansion day 📉 How It Works 🔑 This adds a horizontal line to the chart that is anchored to New York Midnight Open (00:00) by default. It can be changed in the settings in required. You can also toggle on the time being shown above the line.
Pine Script® インジケーター
wintonbanksの投稿
4
Session TimesDescription: This indicator simply when enabled will draw dashed lines at each of the session openings. This is based on UTC+1 Time. There will be lines at 00:00 & 08:00 (Asian Session), lines at 08:00 & 13:00 (London Session) and finally lines at 13:00 & 00:00 (New York Session). Potential Use: There are many ways you could use this indicator to benefit your trading, but the best way I find is that it makes it clear where the previous highs and lows are of a session, which are potential areas you could trade off. Obviously, there are many other ways you can use this to help you. How The Script Works: The way the script works isn't too complicated as it is only a short script. Simply it firstly calculates what are the weekdays (Whenever it isn't Saturday or Sunday). Then from there simply finds the times which I mentioned above, and adds a vertical dashed line there. Future Updates: In the future I will mainly be looking to make the indicator more customisable. Firstly, I will look to make it so that the user can adjust the times that the lines are drawn at so it still works wherever you are in the world. I would also like to make it so the user can choose the colour of the lines. If you have any other additions you would like added to this, then feel free to message me.
Pine Script® インジケーター
finndude19の投稿
Sessions [TradingFinder] New York, London, Tokyo & Sydney ForexTiming is one of the influential factors in a trader's position. This indicator categorizes transactions into three sessions (Asia, Europe, and America). Five significant trading cities (New York, London, Frankfurt, Tokyo, and Sydney) are selectable. I recommend using the tool on a 5-minute time frame, but it is usable on all time frames. Settings: • Trading sessions: Display or hide each trading session as needed. • Color: Change the color of each box. • Session time intervals: The default is based on the main working hours for each time interval and can be adjusted. • Information table: Delete or display additional information table. Information Table: • Trading sessions • Opening and closing times of each trading session How to Use: Initiating trading sessions involves entering with increased liquidity, and the market usually experiences significant movements. Many trading strategies are based on "time" and "session openings." This tool empowers traders to focus intensely on each time interval. These trading sessions are crucial for all Forex, stock, and index traders: The total price ceiling and floor in the Asia session (Tokyo and Sydney) are crucial for traders in the European session. The European session starts with Frankfurt, and an hour later, London begins, collectively forming the European session. The dashboard provides additional information, displaying hours based on UTC. Customization options are considered in all sections so that everyone can apply their own settings. Important: Default times are the most accurate for each region, and in most indicators, this time is not correctly selected. Therefore, the level of influence and time intervals are specified at the beginning of each session. If you are using another indicator, match its default time to the announced time and share the results with me in the comments.
Pine Script® インジケーター
TFlabの投稿
17
Sessions[Lenny Kiruthu]The script below is designed to show up to 4 different trading sessions i.e. London, New York, Tokyo and Sydney sessions, it also displays the days each session is taking place in as well as two horizontal lines one for the previous days high and the other for the previous days low. It also displays a table that shows the user the highest and lowest price for 4 different currency pairs the previous day as well as their current prices and below it a confirmation row that shows whether price is currently above, below or within yesterdays range. Note that it only states "High Broken" or "Low Broken" if the current close is above or below the lines. What you can change Your time zone for example GMT -4 or GMT +3 The session start and end time The colors, border type and border width of the session ranges Displaying the table Ability to choose the 4 symbols to view on the table
Pine Script® インジケーター
Lenny_Kiruthuの投稿
8
Sessions [LuxAlgo]This indicator shows when user set sessions are active and returns various tools + metrics using the closing price within active sessions as an input. Users have the option to change up to 4 session times. The indicator will increasingly lack accuracy when the chart timeframe is higher than 1 hour. Settings Sessions Enable Session: Allows to enable or disable all associated elements with a specific user set session. Session Time: Opening and closing times of the user set session in the hh:mm format. Range: Highlights the associated session range on the chart. Trendline: Returns the associated session trendline on the chart. Mean: Returns the associated session mean average on the chart. VWAP: Returns the associated session volume weighted average price on the chart. Ranges Settings Range Area Transparency: Transparency of the area highlighting sessions ranges. Range Outline: Highlights the borders of the session range area. Range Label: Shows the session label at the mid-point of the session interval. Dashboard Show Dashboard: Enables sessions dashboard on the chart. Advanced Dashboard: Returns more information regarding user set sessions on the dashboard. Dividers Show Session Divider: Highlights active sessions using intervals on the bottom of the chart (this can lead to less responsive charts) Show Daily Divider: Highlights days on the chart. Usage This tool is versatile and allows the user to perform a wide variety of tasks all focusing on highlighting and analyzing price movements within a specific user set session in a periodic fashion. Significant forex trading sessions are used by default, but the users are free to choose the opening and closing time of their choices. Using ranges can indicate which sessions returned the most volatile price movements. Trendlines can be useful to estimate the underlying trend of a specific session, but they can also offer a quick way to see which session started a trend reversal. The session Mean highlights the equilibrium level within a session, extrapolating these levels can provide potential support and resistances levels of interest. Finally, users can use the sessions VWAP's for real time applications, using them as trailing supports and resistances. Using The Advanced Dashboard The advanced dashboard returns useful information regarding the user set sessions. Each dashboard elements are described below: Status: Highlights whether the user set session is active (open) of inactive (closed). Trend: Shows correlation coefficient between the session prices and a linear sequence of values. Values above 0 indicates an up-trending session, while values under 0 indicates a down-trending session. Values closer to (1, -1) indicates a more trending session. Volume: Shows accumulated volume within the session σ (Standard Deviation): Shows standard deviation of the session, while this value is not bounded it can be useful to compare it with the other ones to see which session was the most volatile. Note that when a session becomes inactive the value on the dashboard will hold until the specific session becomes active again.
Pine Script® インジケーター
LuxAlgoの投稿
97
Market Trading Sessions (TG Fork)Visualize trading sessions opening hours of several international exchanges on a grid. Contrary to other indicators, this one automatically aligns the session with the current chart's timezone. This is helpful for bar replay or manual backtesting, to spot patterns of correlations (this can also be used in conjunction with correlation indicators, see my other indicators). Original indicator by Gunzo, if you like this indicator, please show the original author some love: This indicator is also inspired by the following indicators: ZenAndTheArtOfTrading with UnknownUnicorn468659 with This fork implements the following features: Converted to PineScript v5. Adapted default color palette to dark mode, as is the default in TradingView now. Fix drawing issues, now the design shows as it was originally meant to be. Fixed mistiming issue that made some sessions display with a delay compared to the real session, especially the first session was bar at the start of the session was not displayed. Inputted the accurate timings for each session, instead of the default 0800-1600 in the original indicator. Essentially, you can just add this indicator and it should work out of the box. If not, please let me know, and I'll try to fix it!
Pine Script® インジケーター
tartigradiaの投稿