始めましょう

ピボットポイントと水準

Liquidity Levels Pro Tool - thewallranka Liquidity Levels Pro Tool is a market-structure and liquidity-mapping indicator designed to help discretionary futures and index traders identify statistically relevant price levels where reactions, continuations, or liquidity sweeps are more likely to occur. This script is a decision-support tool, not a signal generator. It does not issue buy/sell alerts or predict future price movement. Instead, it organizes and scores liquidity information so traders can make their own contextual decisions. What this indicator does The script continuously detects and maintains liquidity zones derived from price pivots, then evaluates those zones using multiple structural and contextual factors: Repeated price interaction (touches) Freshness (time since last interaction) Confluence with key reference levels Reaction behavior after contact Session relevance (RTH vs overnight) Market regime (trend vs mean reversion) Time-of-day effects (open, midday, power hour) Only the most relevant zones—based on a dynamic scoring system—are displayed to reduce chart clutter and focus attention on levels that have historically mattered. Core components 1. Liquidity Zones Zones are built from pivot highs and lows and expanded into areas using a configurable tick-based padding. Nearby zones are merged to avoid redundancy. Each zone is continuously evaluated and assigned a score (0–100) reflecting its relative importance. 2. Zone Scoring (No Lookahead) Zone scores are based on: Number of confirmed interactions Recency of the last touch Confluence with prior day/week levels, VWAP, and Opening Range Reaction quality after touches (speed and follow-through) Session alignment (zones that “work” in the current session are favored) Penalties after liquidity sweeps Zones are not forward-looking and do not rely on future data. 3. Context Engine The script classifies the current environment using VWAP slope and distance: Trend (up or down) Mean reversion Mixed/transition Time-of-day context (Open, Midday, Power Hour) is also tracked internally and influences zone scoring. This context is displayed in the HUD to support situational awareness, not automated decisions. 4. Liquidity Sweeps Optional sweep detection highlights situations where price trades beyond a zone and closes back inside, indicating potential stop runs or failed breakouts. Sweeps are rate-limited and applied conservatively to avoid visual noise. 5. Trade Planning Levels (Optional) When enabled, the script highlights the nearest high-quality liquidity level above and below price based on score thresholds. These are intended as reference targets, not trade entries or exits. HUD (Heads-Up Display) The on-chart HUD summarizes: Key reference levels (prior day/week, Opening Range) Nearest strong liquidity above/below price Market regime and time-of-day context Distance to levels (ticks or points) The HUD is fully optional, positionable, and includes resizable modes (Small / Medium / Large) to fit different chart layouts. How to use this tool This indicator is best used as part of a discretionary trading process, for example: Identifying areas where price is more likely to react or pause Framing trades around higher-quality structure instead of arbitrary levels Filtering setups based on session and regime context Managing expectations near known liquidity rather than chasing price It is intentionally designed not to provide trade signals. Limitations and important notes This script does not predict outcomes or guarantee reactions High-scoring zones can still fail Liquidity behavior is context-dependent and probabilistic No performance claims or backtested results are provided The indicator should not be used in isolation Past behavior does not imply future results. Chart and usage notes The script is intended for standard time-based charts Recommended for liquid futures and index products Use a clean chart for clarity when publishing or sharing No external indicators are required Final note Liquidity Levels Pro (Tool) — v6 is designed to organize complex market structure into a clear, readable framework, allowing traders to focus on execution and risk management rather than raw level detection. This script reflects an analytical approach to intraday liquidity and structure, not an automated trading system.
Pine Script® インジケーター
thewallrankaの投稿
Hicham XAUUSD Key Levels PRO (1H / 4H + Psychological)🔑 XAUUSD Key Levels PRO | 1H / 4H Structure + Psychological Levels This indicator is designed specifically for Gold (XAUUSD) traders who want clean, institutional-grade key levels without chart clutter. It combines market structure levels with true psychological price levels used by institutions, making it ideal for scalping, intraday, and swing trading. 📌 Features 🔹 Market Structure Key Levels Automatic 1H & 4H High / Low detection Based on swing pivots (configurable strength) Solid lines for clear structure visibility 🔹 Gold Psychological Levels (XAUUSD) Major levels: every 500$ (strong institutional zones) Medium levels: every 250$ Minor levels: every 10$ Dynamic levels around current price No line spam, optimized performance 🔹 Visual Clarity Solid / dashed / dotted line styles Custom colors & line thickness Optional price labels Works perfectly on M1 → H4 🎯 Best Use Cases Liquidity sweeps & reactions Premium / discount zones Stop-loss & take-profit placement Confluence with BOS / CHoCH London & New York sessions ⚙️ Fully Customizable Toggle 1H / 4H levels Adjust psychological level spacing Enable / disable labels Clean & lightweight (no lag) ⚠️ Notes Optimized for XAUUSD (Gold) Best results when combined with price action & structure Not a trading signal indicator If you want: Session-based levels Alerts on key levels Smart Money Concepts integration Feel free to comment or DM 👊 Happy trading 💛📈
Pine Script® インジケーター
hichamfataの投稿
Liquidity Sweep Reentry ToolkitHere’s a clear breakdown of what your Liquidity Sweep Reentry Toolkit script does, and how you can use it on your charts: 🔎 Script Breakdown 1. Visual Controls (Inputs) • : Master toggle to turn all visuals on/off. • : Show labels when a liquidity sweep + ChoCh condition occurs. • : Plot green/red triangles for bullish/bearish reentry signals. • : Prevent multiple signals within the same swing. • : Show HH/HL/LL/LH market structure letters. • : Slider to adjust how dim the background of HH/HL/LL/LH labels appear. 2. Core Conditions • Defines simple bullish () and bearish () candles. • is a placeholder for your Change of Character logic. 3. Sweep Detection • : Detects when price makes a new high compared to the last 5 bars. • : Detects when price makes a new low compared to the last 5 bars. 4. Restriction Flags • Tracks whether a sweep signal has already triggered in the current swing. • Resets when sweeps end, so new signals can appear. 5. Composite Triggers • : Fires when bullish candle + buy-side sweep + ChoCh condition align. • : Fires when bearish candle + sell-side sweep + ChoCh condition align. 6. Visual Labels • Gold labels mark “BS Sweep + ChoCh” or “SS Sweep + ChoCh” events. • Green triangle below bar = bullish reentry. • Red triangle above bar = bearish reentry. • Blue HH/HL/LL/LH labels narrate market structure pivots, with adjustable transparency. 7. Alerts • Alerts can be set for bullish or bearish sweep reentry triggers, so you get notified when conditions align. 📘 How to Use It 1. Apply to Chart Add the script to your TradingView chart (works best on intraday timeframes like 5‑minute). 2. Configure Visuals • Use the Visual Controls panel to toggle features on/off. • Adjust the Label Transparency slider to dim or brighten the HH/HL/LL/LH labels. 3. Interpret Signals • Gold labels show when a sweep + ChoCh condition occurs. • Triangles mark potential reentry points (green = bullish, red = bearish). • HH/HL/LL/LH labels narrate market structure shifts for clarity. 4. Set Alerts • Use the built‑in alert conditions to get notified when bullish or bearish sweep reentry triggers fire. 👉 In short: this toolkit helps you spot liquidity sweeps, confirm with ChoCh, and visualize reentry signals, while also narrating market structure pivots. It’s modular, so you can toggle features depending on how much visual clutter you want. 🛠 Workflow Example 1. Setup • Apply the script to your chart (e.g., 5‑minute S&P futures). • In the indicator settings, decide which visuals you want: • Turn on Sweep + ChoCh labels if you want to see gold tags narrating liquidity events. • Keep Entry triangles on to highlight actionable reentry points. • Adjust the Label Transparency slider so HH/HL/LL/LH structure labels are dim enough not to clutter. 2. Watch for Sweeps • As price pushes above recent highs → a Buy‑side Sweep is detected. • As price dips below recent lows → a Sell‑side Sweep is detected. • If ChoCh logic is true at the same time, you’ll see a gold label (“BS Sweep + ChoCh” or “SS Sweep + ChoCh”). 3. Confirm Reentry • If conditions align (bullish candle + buy‑side sweep + ChoCh), you’ll see a green triangle below the bar. • If bearish candle + sell‑side sweep + ChoCh, you’ll see a red triangle above the bar. • These triangles are your potential reentry triggers. 4. Narrate Market Structure • HH/HL/LL/LH labels appear at pivots, giving you a running commentary of structure shifts. • Example: HH → HL → HH shows bullish continuation; LH → LL → LH shows bearish pressure. • Use the transparency slider to keep these labels subtle but visible. 5. Alerts • Set alerts for “Bullish Sweep Reentry” or “Bearish Sweep Reentry” so you don’t miss signals even if you’re away from the screen. 📘 How to Use in Practice • Intraday trading: On a 5‑minute chart, use the toolkit to spot liquidity grabs and confirm reentry points. • Narration: The HH/HL/LL/LH labels help you keep track of structure without manually marking pivots. • Decision making: Gold labels + triangles = potential trade setups. Structure labels = context for trend bias. • Customization: Dim labels when you want a cleaner chart, brighten them when you’re focused on structure. 👉 In short: this script gives you a modular toolkit — sweeps, ChoCh confirmation, reentry signals, and structure narration — all adjustable so you can tailor the visuals to your workflow. 📈 Bullish Scenario Walkthrough 1. Market Context • You’re watching the 5‑minute chart. • Price has been consolidating near recent highs, building liquidity above. 2. Liquidity Sweep • Price spikes above the prior swing high → the script detects a buy‑side sweep. • A gold label appears: “BS Sweep + ChoCh” (if your ChoCh condition is true). 3. Change of Character (ChoCh) • The candle closes bullish (). • Your ChoCh condition confirms a structural shift. • Together, sweep + ChoCh = potential reentry setup. 4. Reentry Trigger • The script plots a green triangle below the bar. • This marks a bullish sweep reentry signal: price grabbed liquidity and is now showing strength. 5. Market Structure Narration • At the same time, the HH/HL labels update: • The sweep bar prints a new HH. • The next pivot low prints an HL. • This narrates bullish continuation: HH → HL → HH. 6. Trade Decision • You can use the green triangle as your entry cue. • The HH/HL narration gives you confidence that structure supports the trade. • Alerts can be set so you don’t miss the trigger. 7. Risk Management • Stop placement: below the HL pivot or sweep low. • Target: next liquidity pool above, or measured move. 🧭 How to Use This in Practice • Gold label = liquidity event + ChoCh confirmation. • Green triangle = actionable bullish reentry trigger. • HH/HL narration = context for trend bias and trade management. • Transparency slider = keep structure labels subtle so the chart stays clean. 📉 Bearish Scenario Walkthrough 1. Market Context • You’re watching the 5‑minute chart. • Price has been consolidating near recent lows, building liquidity underneath. 2. Liquidity Sweep • Price spikes below the prior swing low → the script detects a sell‑side sweep. • A gold label appears: “SS Sweep + ChoCh” (if your ChoCh condition is true). 3. Change of Character (ChoCh) • The candle closes bearish (). • Your ChoCh condition confirms a structural shift. • Together, sweep + ChoCh = potential bearish reentry setup. 4. Reentry Trigger • The script plots a red triangle above the bar. • This marks a bearish sweep reentry signal: price grabbed liquidity below and is now showing weakness. 5. Market Structure Narration • At the same time, the LH/LL labels update: • The sweep bar prints a new LL. • The next pivot high prints a LH. • This narrates bearish continuation: LH → LL → LH. 6. Trade Decision • You can use the red triangle as your entry cue. • The LH/LL narration gives you confidence that structure supports the short. • Alerts can be set so you don’t miss the trigger. 7. Risk Management • Stop placement: above the LH pivot or sweep high. • Target: next liquidity pool below, or measured move. 🧭 How to Use This in Practice • Gold label = liquidity event + ChoCh confirmation. • Red triangle = actionable bearish reentry trigger. • LH/LL narration = context for trend bias and trade management. • Transparency slider = keep structure labels subtle so the chart stays clean.
Pine Script® インジケーター
dscottmullerの投稿
Buy the dips StrategyThis strategy getting in long position only after the price drop- Buy the dips The % of the drop is Determined by SMA for the first trade The inputs of SMA and % of the drop can be adjust from the User After that Strategy start taking safe trades if not take profit from the first trade The safe trades are Determined by step down deviation % and by quantity There is no Stop loss is not for one with small tolerance to getting under if any question ask
Pine Script® ストラテジー
fullmaxの投稿
MTF Key Levels Pro [Confluence & Flow]MTF Key Levels Pro is an all-in-one market structure and context toolkit designed to reduce chart noise and surface the price levels that matter most. It combines multi-timeframe trend alignment, institutional-style reference levels (VWAP anchors, pivots, volume POC, prior day levels), and confluence detection so you can quickly identify where price is likely to react—and whether the broader flow supports continuation or reversal. This script is intentionally modular: you can enable only what you trade (scalping, day trading, swing, position) while keeping the chart readable via selective plotting and a compact MTF dashboard. What It Does 1) Key Levels Engine (Core Map) The indicator plots a “key-level stack” from multiple methodologies so you are not relying on a single lens: Volume Profile POC (Point of Control) over a configurable lookback (highest traded activity zone). Daily Pivot Levels calculated from prior day H/L/C (PP, R1, S1 and extended levels in the logic). Fibonacci Retracements from recent swing range (38.2 / 50 / 61.8). Moving Averages (three configurable MAs for trend structure). Previous Day High/Low (PDH/PDL) for intraday reference points. ATH/ATL tracking (optional) for macro context. 2) Anchored VWAP Suite (Flow Anchors) A multi-anchor VWAP system that resets and recalculates at the start of each period: Hourly VWAP (scalping / micro-structure) Daily VWAP (day trading standard reference) Weekly VWAP (swing context) Monthly VWAP (position context) 3) Multi-Timeframe Alignment Dashboard (Trend Consensus) The dashboard pulls 5 configurable timeframes (defaults: 5m, 30m, 1h, 4h, D) and displays: Price snapshot per timeframe Trend direction (simple momentum/trend comparison vs lookback) Volume % change Alignment status (BULL ALIGNED / BEAR ALIGNED / MIXED), including bars since alignment began Use this to avoid trading against higher timeframe pressure and to time entries when multiple timeframes agree. 4) Order-Flow Lite (Volume & Delta) A practical “flow confirmation” layer using candle-based volume classification: Buy vs sell volume approximation (close vs open) Delta strength label (Strong Buy / Strong Sell / Neutral) Volume surge detection vs SMA(volume) with a configurable multiplier Optional background shading on surge events 5) Confluence Zones (Signal Compression) Confluence zones automatically form when multiple independent levels cluster together within a configurable tolerance: You choose tolerance % and minimum levels required (e.g., 3+). Zones are plotted as highlighted regions and listed in the dashboard with proximity markers (AT / NEAR). This is the “decision layer”: the script doesn’t just draw levels—it tells you where multiple reasons to react overlap. How to Use It (Practical Outline) Typical Workflow Check dashboard alignment: trade with alignment for continuation setups; treat MIXED as caution/mean-reversion regime. Identify nearest confluence zones: prioritize trades at/near zones versus isolated single levels. Use VWAP anchor + PDH/PDL + Pivot as the intraday framework, then confirm with volume surge/delta bias. Manage risk around zones: zones are natural areas for rejection, breakout, or retest logic. Recommended Configurations (Quick Start) Scalping (1m–5m chart): Hourly VWAP + Daily VWAP + Daily Pivots + Confluence Day Trading (5m–1h): Daily VWAP + Pivots + PDH/PDL + Confluence + Alignment dashboard Swing (1h–4h): Weekly VWAP + MA50/MA200 + Confluence + Alignment Position (D/W): Monthly VWAP + MA200 + ATH/ATL + Confluence Alerts Included Confluence Touch: triggers when price is within proximity of a confluence zone. Trend Change: triggers when the alignment state changes (e.g., MIXED → BULL ALIGNED). Volume Spike: triggers on surge events versus the configured baseline. Notes / Intended Use This indicator is built for context and decision support (key levels + trend consensus + flow cues). It is not a standalone “buy/sell system” by design; instead, it provides a structured map for entries, invalidation, and target planning around areas of highest market agreement. If you want, I can also produce a TradingView-ready “Description + Feature bullets + How to trade + Settings guide + Alert guide” in the exact formatting style commonly used on public TradingView scripts (including a short disclaimer and a clean feature list).
Pine Script® インジケーター
vkoncsekの投稿
Batman SignalBATMAN SIGNAL: Identify Potential Reversal Patterns The Batman Signal is designed to help spot potential reversal patterns that may indicate institutional activity at key price levels. It looks for a distinct "double rejection" structure, with the crucial second rejection accompanied by a liquidity spike (high volume), suggesting significant market participation. 🔑 KEY FEATURES • Dynamic Support & Resistance Zones: Automatically calculates and draws key zones on your chart, giving an at-a-glance view of major price reaction levels where 'Batman' patterns are most likely to form. • Momentum Clusters: See market bias instantly. Clusters of green or red dots in the top margin show where bullish or bearish patterns are actively forming. Nested purple diamonds within these clusters highlight high-volume liquidity spikes. Increasing concentration here can provide an early warning for the next major setup. • Four Powerful, Independent Alerts: Each alert is a robust signal engineered to catch market turns. Use them separately or in sequence based on your style. • Non-Repainting, Close-Based Signals: All final confirmation triangles plot ONLY AFTER the bar closes, providing dependable execution signals. • Volume-Spike Confirmation: Core logic identifies "liquidity spikes" (high volume) at key rejection areas, filtering for significant market participation. • Full Customization: Tune every aspect from trend sensitivity, zone detection, volume filters, pattern timing and structure to match any asset or timeframe. 🦇 THE FOUR BATMAN SIGNALS The indicator scans for a specific "double rejection" structure: • "Left Ear" – initial rejection at a key zone. • "Right Ear" – volume-confirmed rejection at a similar level. This creates four distinct, non-repainting alerts: Bullish Right Ear Alert – Early warning at support. Bearish Right Ear Alert – Early warning at resistance. Confirmed Bullish Batman Signal – Final trigger after bar close. Confirmed Bearish Batman Signal – Final trigger after bar close. HOW TO READ THE CHART: • Blue Lines – Dynamic support/resistance zones. • "R" Labels & Purple Diamonds – Mark developing Right Ear rejections with volume spike. • Green/Red Triangles – Show the confirmed, final Batman pattern signal. • Clusters of Green/Red Dots – Show active bullish/bearish pattern zones (top margin). • Nested Purple Diamonds – Highlight high-volume spikes within clusters. • Gray EMA – Provides trend context. ⚙️ CUSTOMIZABLE INPUTS Trend & Zones: – Trend EMA Period – Adjust baseline trend sensitivity. – Key Zone Lookback – Set how far back to scan for key levels. – Zone Tolerance % – Fine-tune the zone width. Pattern Logic: – Min/Max Consolidation Bars – Control time window between Left and Right Ear. – Min Wick Ratio for Right Ear – Filter for strong rejection wicks. – Min Spike Size (ATR) – Set minimum volatility for the Right Ear. Volume Filter (Right Ear Only): – Toggle volume confirmation on/off. – Volume Lookback Period – Bars used for average volume calculation. – Min Volume Ratio – Right Ear volume must be this many times above average. Visual Settings: – Show/Hide labels and key zones. – Customize bullish, bearish, and zone colors. 📘 HOW TO TRADE WITH IT Apply the "Batman Signal" to your chart. Watch price action at the blue zones and monitor the top-margin dot clusters for active momentum. Nested purple diamonds signal volume spikes. Set alerts for your preferred signal type (Right Ear for early warning, or final Batman Signal for confirmation). Alerts are robust and will fire on bar after print. ALWAYS use sound risk management—define stop-loss and take-profit levels. Recommended timeframes: 15min and 1 hour for optimal balance. Works on all timeframes with appropriate tuning. 🔔 IMPORTANT ALERT SETUP TIP When you change any input setting (e.g., Min Spike Size, Volume Filter), you MUST delete any existing alerts and create new ones. TradingView saves alerts as a static snapshot of your settings at creation. This ensures your alerts always match the strategy you see on the chart. DISCLAIMER: Note: This indicator is for informational purposes only and does not constitute financial advice. Users are encouraged to backtest thoroughly and evaluate the indicator's performance in their trading strategy.
Pine Script® インジケーター
GreenIce_Firefallの投稿
Hitjo Zones TFTL;DR – READ THIS FIRST This is a TWO-INDICATOR SYSTEM. Both indicators must be used together. Hitjo Zones TF = WHERE you are allowed to trade Hitjo Swing Trend = WHEN you are allowed to trade Rules: Only take BUY signals from Hitjo Swing Trend inside DEMAND zones from Hitjo Zones TF Only take SELL signals from Hitjo Swing Trend inside SUPPLY zones from Hitjo Zones TF Ignore signals when structure and timing do not align Recommended setup: 1H chart with 4H or Daily zones. Hitjo Swing Trading System (Hitjo Zones TF + Hitjo Swing Trend) This TradingView system combines higher-timeframe Supply & Demand zones with momentum-based swing entries to create a clean, rule-based swing trading framework. It is designed for traders who want fewer but higher-quality trades, clear market structure, objective entry timing, and reduced overtrading. Required Indicators Hitjo Zones TF (Structure) Automatically draws Supply & Demand zones using a selectable higher timeframe. Displays SUPPLY and DEMAND labels when price enters key zones. Defines where trades are allowed. Do not trade based on zones alone. Hitjo Swing Trend (Timing) Displays BUY and SELL labels using EMA structure, momentum, and higher-timeframe trend. Plots ATR-based stop loss and target levels. Defines when to enter trades. Do not take BUY or SELL signals outside zones. Core Concept Hitjo Zones TF tells you WHERE to trade. Hitjo Swing Trend tells you WHEN to trade. If both are not aligned, there is no trade. Trading Rules Long Trades Take a BUY only when all conditions are true: Price is inside or just above a DEMAND zone from Hitjo Zones TF Higher-timeframe trend is bullish A BUY label appears from Hitjo Swing Trend There is room to target without immediately hitting resistance Short Trades Take a SELL only when all conditions are true: Price is inside or just below a SUPPLY zone from Hitjo Zones TF Higher-timeframe trend is bearish A SELL label appears from Hitjo Swing Trend There is room to target without immediately hitting support Common Mistakes to Avoid Buying just because DEMAND appears Selling just because SUPPLY appears Taking BUY or SELL signals in the middle of the chart Counter-trend trading Forcing trades on every signal Stops and Targets Hitjo Swing Trend plots: Stop Loss using ATR (red) Target using ATR (green) These are visual guides only, not broker orders. Recommended Setup Chart timeframe: 1H Zone timeframe (Hitjo Zones TF): 4H or Daily Fast / Slow EMA: 8 / 21 ATR Stop / Target: 1.5 / 3.0 Remember This DEMAND does not mean BUY SUPPLY does not mean SELL DEMAND + BUY = Long SUPPLY + SELL = Short Disclaimer This system does not predict tops or bottoms and does not guarantee profits. It is designed to help traders wait for alignment, reduce low-quality trades, and trade with structure. Always manage risk appropriately. TradingView Search Keywords Supply Demand Swing Trading EMA Strategy Multi Timeframe Trend Following Support Resistance Momentum Trading ATR Stop Loss Crypto Trading Stock Trading
Pine Script® インジケーター
codespeedtradesの投稿
Daily Dynamic Grid StrategyHi everyone, This strategy is built around a dynamic daily grid concept, using an upper and lower daily range that is automatically divided into multiple grid levels. The idea is to take advantage of daily volatility by executing DCA entries on specific grid levels, based on predefined conditions. Key points of the strategy & feature: I recommend using 1H or 2H timeframe for this strategy Take profit by grid When DCA is active (>1 entry), the exit condition switches to close above the average price A hard stop loss is applied Includes an optional Trailing TP / SL to help maximize profit during strong moves Like most DCA-based strategies, it tends to have a high win rate, but during strong market dumps, losses can become relatively large Can also be used for backtest on Forex markets such as Gold, where using the trailing option is generally more effective And still trial for the webhook, may continue to improve and update this strategy in future versions.
Pine Script® ストラテジー
begrilの投稿
NY Session Range & FlowNY Session Range & Flow is a rule-based intraday futures indicator designed for the New York session, with a focus on MNQ / NQ price behavior. This indicator does not predict the market. Instead, it maps context, structure, and flow so traders can make disciplined decisions with predefined risk. 🔍 Core Concepts NY Session Range & Flow combines: Session structure Range usage (ADR / AWR) VWAP positioning & slope Liquidity sweeps Supply & Demand zones Opening Range Breakouts Mean reversion vs trend continuation logic All signals are graded and throttled to reduce noise and overtrading. 📌 What the Indicator Shows 🕒 Session Logic (NY Time) RTH (09:30–16:00 NY) Trade windows (AM / PM) Opening Range (09:30–09:45) ETH session ranges (for context only) 📊 Range & Regime Awareness ADR / AWR usage Identifies expansion vs exhaustion Helps avoid trading when range is already spent 📉 Flow & Bias VWAP with optional ATR bands VWAP slope filter for directional bias Mean reversion distance rules 🧲 Liquidity & Structure Prior Day High / Low NY High / Low / Mid Opening Range High / Low Liquidity sweep detection 📦 Supply & Demand Zones Higher-timeframe pivot-based zones ATR-adjusted zone thickness Last active zone tracking 🎯 Signal Types (Graded) Trend Continuation Sweep Reversal Opening Range Breakout (ORB) Mean Reversion to VWAP Each signal is scored and graded (A+ → C) based on: Structure Liquidity VWAP alignment Regime context Only signals that meet your selected quality threshold are displayed. ⚖️ Risk Visualization Fixed Stop Loss & Take Profits in ticks Supports SL + TP1 + TP2 Optional ATR trailing structure Visual SL/TP lines for clarity (manual execution) This is a decision-support tool, not an auto-trading system. 📋 Range Usage Table Displays real-time usage for: RTH ETH Weekly Monthly ranges Color-coded to highlight expansion and exhaustion. ⚠️ Important Notes Designed for manual trading Best suited for futures traders Optimized for MNQ / NQ, but adaptable Not financial advice 🔧 Recommended Use Combine with strict risk management One trade at a time Respect session context and range limits
Pine Script® インジケーター
gabriel331995の投稿
Kriptano short sniperKriptano short sniper An indicator for finding SHORT entry points after sharp price movements in the cryptocurrency market. Features: Pump Detector: Automatically detects price spikes on 15m, 30m, and 1h intervals with customizable thresholds. Resistance Levels: Dynamic lines on 7 timeframes (5m-1W) with automatic deletion after a breakout. Volume Profile: Volume distribution by price levels with a sentiment profile (bullish/bearish zones). Can help identify pump reversal points. Kriptano short sniper Индикатор для поиска точек входа в SHORT после резких ценовых движений на криптовалютном рынке.​ Возможности: Детектор пампа: автоматическое выявление скачков цены на интервалах 15m, 30m, 1h с настраиваемыми порогами Уровни сопротивления: динамические линии с 7 таймфреймов (5m-1W) с автоудалением после пробития Volume Profile: распределение объема по ценовым уровням с профилем настроений (бычьи/медвежьи зоны). Может помочь в определении точки разворота пампа.
Pine Script® インジケーター
wdfeiekの投稿
STRUCTUREX - Smart Market Structure and Liquidity (CORE)STRUCTUREX CORE is a comprehensive Smart Money Concepts (SMC) indicator that identifies market structure, liquidity zones, and institutional order flow patterns. █ WHAT IT DOES This indicator detects and visualizes: - Market Structure: Swing Highs/Lows with HH, HL, LH, LL labels - Break of Structure (BOS): Trend continuation signals - Change of Character (CHOCH): Potential trend reversal signals with confidence grading (A/B/C) - Order Blocks: Demand and supply zones from displacement candles - Liquidity Pools: Equal Highs (EQH) and Equal Lows (EQL) with sweep detection - Absorption Zones: Demand/supply from range compression with displacement █ HOW IT WORKS Structure Detection: The swing engine uses configurable pivot detection with ATR-based filtering. Profile presets (Scalper/Intraday/Swing) automatically adjust sensitivity. BOS occurs when price breaks a reference swing level. CHOCH occurs when the opposite swing level breaks, signaling potential trend change. Order Blocks: Detected via displacement - strong impulsive candles that leave behind imbalance zones. Creation triggers include BOS, CHOCH, or pure displacement. Zones track mitigation (price returns to zone) and invalidation (price closes beyond zone). Liquidity: Equal Highs/Lows form when multiple pivots cluster at similar price levels (ATR tolerance). The engine detects sweeps (wick beyond, close inside) vs breaks (close beyond). Absorption: Range compression (tight consolidation) followed by displacement creates demand/supply zones. █ QUALITY SCORING All zones receive quality scores and tier grades (A/B/C) based on: - Zone strength and displacement quality - Freshness (recency) - Position relative to current price - Regime alignment (bullish zones in bullish regime score higher) Top-N governance shows only the best zones per side to reduce clutter. █ HOW TO USE 1. Select a Profile matching your timeframe (Scalper for M1-M5, Intraday for M15-H1, Swing for H4+) 2. Use Zone Density to control how many zones appear (Minimal/Balanced/Rich) 3. Look for confluence: OB + Liquidity + Structure alignment = higher probability 4. BOS = trend continuation opportunity 5. CHOCH = potential reversal, wait for confirmation █ SETTINGS OVERVIEW Quick Start: - Profile: Preset pivot and filter values - Enable Structure: Master toggle for Swing/BOS/CHOCH - Enable Zones: Master toggle for OB/Liquidity/Absorption Structure Visuals: - BOS/CHOCH display style (Labels, Lines, or both) - Line extension and styling Order Blocks / Liquidity / Absorption: - Enable toggles - Tier display (A_B recommended) - Max zones per side - Advanced detection parameters █ RECOMMENDED DEFAULTS - Profile: Intraday - OB/Liquidity/Absorption: Tier A_B, TopN 2-3 - Structure: Line+Label, 80 bar extension - This gives a clean, professional chart █ ALERTS For alerts and webhooks, use the companion STRUCTUREX SIGNALS indicator (coming soon). █ NOTES - This is the CORE visual indicator - all drawings, no alerts - Works on any market and timeframe - Optimized for performance with visual throttling - Settings organized for easy use: most users only need Quick Start options
Pine Script® インジケーター
Interakktiveの投稿
1
Kairos Bands [v1.1]Overview The Kairos Bands Strategy is a highly modular trading system designed to identify high probability entry points based on volatility exhaustion and momentum shifts... It is built with a proprietary core algorithm that detects when price has extended too far from its mean, but it is wrapped in a Confluence Cloud that allows the user to filter these signals through nine different secondary indicators... This is not just a static strategy... It is a framework that allows you to build your own edge by toggling specific filters on and off to match current market conditions... 1... The Chameleon Feature (Trend or Reversal) One of the most powerful features of Kairos Bands is the Inverse Trades logic... Reversal Mode (Default): By default, the strategy looks for price exhaustion... It buys when the market is oversold and sells when the market is overbought... This is ideal for ranging markets or catching tops and bottoms... Trend Following Mode (Inversed): By checking the Inverse Trades box in the settings, the logic flips completely... A Buy signal becomes a Sell and vice versa... This transforms the strategy into a breakout or trend following system, entering trades in the direction of the momentum rather than against it... 2... The Confluence Cloud While the core trigger is based on proprietary volatility calculations, the user has full control over how strictly those trades are filtered... You can toggle any of the following 9 momentum filters independently for both Long and Short setups... RSI (Relative Strength Index) Stochastic Oscillator CCI (Commodity Channel Index) Williams %R MFI (Money Flow Index) CMO (Chande Momentum Oscillator) Fisher Transform Ultimate Oscillator ROC (Rate of Change) For example, you can require RSI and MFI to agree with the main signal for Longs, but only require Stochastic for Shorts... This allows for granular tuning... 3... Trend Bias & Time Management To further refine entries, the strategy includes: EMA Trend Filter: An optional dual EMA system (Fast vs Slow) that forces the strategy to only trade in the direction of the dominant trend... Precision Time Filtering: You can define exact start and end times (down to the minute) for entries... No Trade Zone (NTZ): A specific time window where the strategy is forbidden from holding positions... If a trade is open when the NTZ begins, it is immediately force closed to avoid volatility events or market closes... 4... Risk Management The strategy moves away from vague percentage based stops and uses precision point based targeting... Fixed Points: Set your Take Profit and Stop Loss in exact price points... Signal Skipping: An optional feature to cool down the strategy after a trade closes, forcing it to skip a set number of subsequent signals to avoid over trading... 5... Professional Analytics Dashboard The visual overlay provides a detailed Heads Up Display (HUD) containing institutional grade metrics... Strategy Grade: An automatic A through F grading system based on the Win Rate Differential (how much better the strategy performs compared to a breakeven coin flip)... Streak Analysis: Tracks the maximum and average consecutive wins and losses to help you understand the psychological drawdown risk... Rolling PnL: A secondary dashboard tracks your hypothetical Net PnL over the last 7 trading days and the last 12 months, giving you a clear view of short term and long term performance...
Pine Script® ストラテジー
kingdomcitizendavidの投稿
[iQ]PRO Market Structure+ 🚀 PRO Market Structure - Unlocking the Language of the Market A premium, institutionally-inspired indicator meticulously engineered to decode the complex dynamics of price action and market structure in real-time. The PRO Market Structure tool provides a clear, objective framework for identifying and tracking the crucial swing points that define market trends. Designed for traders who demand precision, this indicator automatically maps out the high-probability levels of support and resistance, transforming raw price data into actionable structural intelligence. 🧠 Core Intelligence This advanced tool employs a sophisticated, proprietary logic to pinpoint confirmed market swing highs and swing lows (HH, HL, LH, LL). Unlike simpler methods, our unique state-machine algorithm handles market noise and consolidations with exceptional resilience, ensuring the plotted structure is robust and reliable. Dynamic Pivot Detection: Utilizes adjustable look-back periods to confirm significant swing points, ensuring you are focused only on structural moves that matter. Sequential Structure Tracking: The indicator maintains a rigorous internal state, tracking the sequence of structure breaks to distinguish between continuous trend moves and potential reversals. 🔥 Actionable Signal Generation Move beyond static charting with immediate, intelligent alerts for critical shifts in market control. BOS (Break of Structure): Automatically detects and marks powerful confirmations of a continuing trend, signaling momentum and directional strength. CHoCH (Change of Character): Clearly identifies the initial warning signs of a potential trend reversal, highlighting the critical structural level where market balance shifts from bulls to bears, or vice-versa. Precision and Customization: Signals are generated based on a choice between wick or close penetration, combined with an optional buffer to filter out noise and guarantee high-confidence breaks. 📊 Multi-Timeframe (MTF) Mastery Gain an unparalleled bird's-eye view of the market with the integrated MTF Structure Panel. Holistic Context: Simultaneously monitors key market structure on up to three user-defined timeframes, providing essential confluence for high-conviction trade entries. Advanced Evaluation: The MTF panel offers a proprietary assessment of Trend, Status (BOS/CHoCH), Retracement Percentage, and Key Break Levels for each timeframe, streamlining your top-down analysis into a single, comprehensive view. ✨ Key Features at a Glance Real-time Level Plotting: Optional plotting of current structural levels (HH, HL, LH, LL) acts as dynamic guides for price action. Customizable Aesthetics: Full control over colors, line styles, and labeling to integrate seamlessly with your charting setup. Performance Optimization: Efficient use of Pine Script features, managing object counts to ensure smooth, lag-free operation even on lower timeframes. The PRO Market Structure is not just an indicator; it is your dedicated structural analyst, providing the objective edge required to navigate complex markets with confidence.
Pine Script® インジケーター
MarketMakerlQの投稿
Student Wyckoff Relative StrengthSTUDENT WYCKOFF Relative Strength compares one instrument against another and plots their relative performance as a single line. Instead of asking “is this chart going up or down?”, the script answers a more practical question: “is THIS asset doing better or worse than my benchmark?” ━━━━━━━━━━ 1. Concept ━━━━━━━━━━ The indicator builds a classic relative strength (RS) line: • Main symbol = the chart you attach the script to. • Benchmark symbol = any symbol you choose in the settings (index, ETF, sector, another coin, etc.). RS is calculated as: RS = Price(main symbol) / Price(benchmark) If RS is rising, your symbol outperforms the benchmark. If RS is falling, your symbol underperforms the benchmark. You can optionally normalize RS from the first bar (start at 1 or 100) to clearly see how many times the asset has outperformed or lagged behind over the visible history. This is not a “buy/sell” indicator. It is a **context tool** for rotation, selection and Wyckoff-style comparative analysis. ━━━━━━━━━━ 2. How the RS line is built ━━━━━━━━━━ Inputs: • Source of main symbol – default is close, but you can choose any OHLC/HL2/typical price etc. • Benchmark symbol – ticker used as reference (index, sector, futures, Bitcoin, stablecoin pair, etc.). • Benchmark timeframe – by default the current chart timeframe is used, or you can force a different TF. The script uses `request.security()` with `lookahead_off` and `gaps_off` to pull benchmark prices **without look-ahead**. A small epsilon is used internally to avoid division by zero when the benchmark price is very close to 0. Normalization options: • Normalize RS from first bar – if enabled, the very first valid RS value becomes “1” (or 100), and all further values are expressed relative to this starting point. • Multiply RS by 100 – purely cosmetic; makes it easier to read RS as a “percentage-like” scale. ━━━━━━━━━━ 3. Smoothing and color logic ━━━━━━━━━━ To help read the trend of relative strength, the script calculates a simple moving average of the RS line: • RS MA length – period of smoothing over the RS values. • Show RS moving average – toggle to display or hide this line. Color logic: • When RS is above its own MA → the line is drawn with the “stronger” color. • When RS is below its MA → the line uses the “weaker” color. • When RS is close to its MA → neutral color. Optional background shading: • When RS > RS MA → background can be tinted softly green (phase of relative strength). • When RS < RS MA → background can be tinted softly red (phase of relative weakness). This makes it easy to read the **trend of strength** at a glance, without measuring every small swing. ━━━━━━━━━━ 4. How to interpret it ━━━━━━━━━━ Basic reading rules: • Rising RS line – The main symbol is outperforming the benchmark. – In Wyckoff terms, this can indicate a leader within its group, or a sign of accumulation relative to the market. • Falling RS line – The main symbol is underperforming the benchmark. – Can point to laggards, distribution, or simply an asset that is “dead money” compared to alternatives. • Flat or choppy RS line – No clear edge versus the benchmark; performance is similar or rotating back and forth. With normalization on: • RS > 1 (or > 100) – the asset has grown more than the benchmark since the starting point. • RS < 1 (or < 100) – it has grown less (or fallen more) than the benchmark over the same period. The RS moving average and colored background highlight whether this outperformance/underperformance is a **temporary fluctuation** or a more sustained phase. ━━━━━━━━━━ 5. Practical uses ━━━━━━━━━━ This indicator is useful for: • **Selecting stronger assets inside a group** – Compare individual stocks vs an index, sector, or industry ETF. – Compare altcoins vs BTC, ETH, or a crypto index. – Prefer charts where RS is in a sustained uptrend rather than just price going “up on its own”. • **Monitoring sector and rotation flows** – Attach the script to sector ETFs or major coins and switch the benchmark to a broad market index. – See where capital is rotating: which areas are gaining or losing strength over time. • **Supporting Wyckoff-style analysis** – Use RS together with volume, structure, phases and trading ranges. – A breakout or SOS with rising RS vs the market tells a different story than the same pattern with falling RS. • **Portfolio review and risk decisions** – When an asset shows a long period of relative weakness, it may be a candidate to reduce or replace. – When RS turns up from a long weak phase, it can signal the start of potential leadership (not an entry by itself, but a reason to study the chart deeper). ━━━━━━━━━━ 6. Notes and disclaimer ━━━━━━━━━━ • Works on any symbol and timeframe available on TradingView. • The last bar can change in real time as new prices arrive; this is normal behaviour for all indicators that depend on current close. • There are no built-in alerts or trading signals – this tool is meant to support your own analysis and trading plan. This script is published for educational and analytical purposes only. It does not constitute financial or investment advice and does not guarantee any performance. Always test your ideas, understand the logic of your tools and use proper risk management.
Pine Script® インジケーター
StudentWyckoffの投稿
2
Daily Context (yctrades_)This indicator automatically marks the Previous Day’s High and Low, as well as the market’s midnight opening price. These levels are updated at the start of each new trading day and remain visible throughout the entire session. By providing key daily reference points, the indicator helps establish a clear market context and allows traders to immediately understand where price is positioned relative to the previous day’s range and the daily open. The New York midnight line (00:00 NY) now appears only at the actual NY midnight. Any previous day’s NY midnight line is automatically deleted when the day changes. Between the previous NY midnight and the current one, no line is displayed, avoiding clutter or outdated lines. The line’s color can now be individually customized via NY 00:00 Line + Text Color input, applying to both the line and its label. Displays a vertical line between each trading day. Fully customizable in the settings: Color of the line Width of the line Style (solid, dashed, dotted) This makes it easy to visually separate trading sessions directly on the chart. PDH / PDL are calculated using UTC 00:00–23:59 to ensure identical levels for all traders worldwide, regardless of market or timezone.
Pine Script® インジケーター
yctrades_の投稿
Unmitigated Liquidity ZonesUnmitigated Liquidity Zones Description: Unmitigated Liquidity Zones is a professional-grade Smart Money Concepts (SMC) tool designed to visualize potential "draws on liquidity" automatically. Unlike standard Support & Resistance indicators, this script focuses exclusively on unmitigated price levels — Swing Highs and Swing Lows that price has not yet revisited. These levels often harbor resting liquidity (Stop Losses, Buy/Sell Stops) and act as magnets for market makers. How it works: Detection: The script identifies significant Pivot Points based on your customizable length settings. Visualization: It draws a line extending forward from the pivot, labeled with the exact Price and the Volume generated at that specific swing. Mitigation Logic: The moment price "sweeps" or touches a level, the script treats the liquidity as "collected" and automatically removes the line and label from the chart. This keeps your workspace clean and focused only on active targets. Key Features: Dynamic Cleanup: Old levels are removed instantly upon testing. No chart clutter. Volume Context: Displays the volume (formatted as K/M/B) of the pivot candle. This helps you distinguish between weak structure and strong institutional levels. High Visibility: customizable bold lines and clear labels with backgrounds, designed to be visible on any chart theme. Performance: Optimized using Pine Script v6 arrays to handle hundreds of levels without lag. How to trade with this: Targets: Use the opposing liquidity pools (Green lines for shorts, Red lines for longs) as high-probability Take Profit levels. Reversals (Turtle Soup): Wait for price to sweep a bold liquidity line. If price aggressively reverses after taking the line, it indicates a "Liquidity Grab" setup. Magnets: Price tends to gravitate toward "old" unmitigated levels. Settings: Pivot Length: Sensitivity of the swing detection (default: 20). Higher values find more significant/long-term levels. Limit: Maximum number of active lines to prevent memory overload. Visuals: Toggle Price/Volume labels, adjust line thickness and text size.
Pine Script® インジケーター
tikkiwiki_cryptoの投稿