始めましょう

ピボットポイントと水準

HH-LL ZZAnother ZigZag, yes... I believe though this concerns another angle/principle, therefore I wanted to share How does it work? Given: source for level breach -> close X breaches -> 3 Let's say this is the latest found 'lower low' (LL - blue dot under bar): This bar has been triggered because 3 bars closed under low of previous 'trigger bar' (TB ) The high and low of this new TB  will act as triggers (aqua blue lines, seen in image above) Then there are 2 options: - again 3 bars closes under the latest TB , in that case the TB  moves to that new LL. - 3 bars closes higher than the high of previous TB  The high and low of this new TB  act again as trigger If a new TB  LL/HH is found, the script checks previous LL/HH and searches the highest/lowest point in between. If necessary, the temporary highest/lowest will be adjusted: Another example: The last 2 points can change (repaint). Yellow coloured lines/labels are set and won't change anymore. Concluded: In case of these settings: source for level breach -> close X breaches -> 3 once a new TB  is found, the high and low act as trigger lines - when 3 bars closes under that low , a new LL is found, this will be the new TB  - when 3 bars closes above that high , a new HH is found, this will be the new TB  and so on... Settings: source for level breach -> close or high/low - H/L X breaches -> 1 -> 10 line style -> solid, dotted, dashed show level breaches -> new found TB (blue/lime coloured) show Support/Resistance (lines at the right) repaint warning can be removed show labels / lines This ZZ can be used for Harmonic patterns, Trend evaluation, support/resistance,... In this script, I also used new features - text_font_family = font.family_monospace -> link - display=display.pane -> link Cheers!
Pineスクリプト™ インジケーター
fikiraの投稿
57
Trend SuggestionsThis brings together a number of variables to produce trend predictions that could be utilized as decision-making tools. Uses the aforementioned price and volume derivatives - A moving average and three weighted moving averages (WMA1, WMA2, WMA3) - Super Trend Line (ST) - Opening Range Breakout on Five Minutes, Resistance Bands Pocket pivots, support, and price volume he Direction is determined by the High and Low Bands of WMAs and the Supertrend Line, which are used to determine the Upper and Lower Lines around the Price. When the price passes below the lower boundary of the band, a downtrend is said to have begun. Similarly, for an uptrend, this continues until the price passes over the upper edge of the band. Teal for an uptrend and fuchsia for a downturn area shared by the band to identify the trend. The first five minutes of the breakout lines have a tiny buffer augmentation of 11% applied to them. Based on what has been observed, support and resistance zones have been somewhat changed from the figures that are often utilized (might work other markets as well) The markings that may be seen are as follows: - Blue Triangle indicates a pocket pivot with an upward bias; - Maroon Triangle indicates a pocket pivot with a downward bias; - Teal colored Diamonds indicate price upthrusts and potential trend confirmation locations, depending on success or failure. - Similar backdrop color changes that look as vertical shading are also used to identify them. - Fuchsia-colored diamonds indicate price declines and a potential trend, depending on whether it persists or fails. - Dark green and maroon square boxes indicate potential price reversals in the support and resistance bands, respectively. It goes without saying that this work is derived from numerous other open-source community initiatives. Feel free to adjust anything you'd like, and we appreciate any feedback.
Pineスクリプト™ インジケーター
VVVfVの投稿
7
Automatic Fibonacci Retracement + Golden Ratio | by Octopu$👑 Automatic Fibonacci Retracement on Specific Timeframes + Golden Ratio | by Octopu$ Fibonacci Retracement is a method of technical analysis for determining support and resistance levels. It is named after the famous Fibonacci sequence of numbers: 23.6%, 38.2%, 61.8%, and 78.6% These ratios provide price levels to which markets tend to retrace a portion of a move. Also used as a potential spot before a trend continues (or reverses) original direction. While not officially a Fibonacci ratio, 50% is also used. Fibonacci Levels can be drawn between any two significant price points or time frames. (Such as a High and a Low or also on Daily and Weekly charts) The indicator will then Automatically create the levels between those selected points. Golden ratio, also known as the divine proportion, in mathematics, is the irrational number: (1 + Square root of√5)/2, often denoted by the Greek letter ϕ or τ Which is approximately equal to 1.618. (Two quantities are in the golden ratio if their ratio is the same as the ratio of their sum to the larger of the two quantities.) That's The Magic of the Fibonaccis, as well the Golden Ratio itself. And this is exactly where this Indicator by Octopu$ kicks in: This indicator Automatically sets all the Fibonacci Levels within the Retracement selected. On top of that, it Highlights the Golden Ratio for the Fibonacci Levels drawn. Additionally, it sets the Golden Ratio as possible Support or Resistance level, Doing so by having visual identification to the Up or Down side. This changes the game! Along with Price Action, Trend Direction, Chart Analysis and other Indicators as well. (The combination relies on your own knowledge about Confluence Factors along with your Due Diligence) www.tradingview.com SPY ANY Ticker. ANY Timeframe. (SPY 5m as an example only) Features: • Multiple Timeframes • Automatic Lines • Fibonacci Setup • Golden Ratio • S/R Highlight Options: • Timeframe Selection • Fibonacci Rates • Line Customization • Color Pickers • Toggle On/Off Notes: v1.0 Indicator release. Changes and updates can come in the future for additional functionalities or per requests. Follow and Stay Tuned! Did you like it? Please Support and Shoot me a message! I'd appreciate if you dropped by to say thanks! Thank you. - Octopu$ 🐙
Pineスクリプト™ インジケーター
IamtheOctopuSの投稿
6
Wavetrend DivergencesCreated for the MarketCipher Community and friends :) This indicator is partly based on Wavetrend Oscillator by LazyBear / blue momentum waves on MarketCipher B. The Wavetrend indicator is a combination of 2 oscillator lines that signals the short term direction of the price once the lines cross. The Wavetrend indicator is useful but only once a divergence has been identified based on the crosses and the price which is what this strategy partly uses to open trades. This indicator signals divergences in the wavetrend, both regular and hidden divergences. This indicator utilizes support and resistances to make sure that the indicator only signals high probability winning divergences. Supports represents a low level a stock price reaches over time, while resistance represents a high level a stock price reaches over time. Support materializes when a stock price drops to a level that prompts traders to buy. This reactionary buying causes a stock price to stop dropping and start rising and this is where the indicator will be looking for a divergence at a price point of your choosing. To make it easier i have added a support and resistance drawing indicator that will help you find price points on the chart that the price is likely to get a reaction from. There are right now only 4 support or resistances that can be drawn at one time so make sure to update the levels as the market changes. I have helped update and modify from the original script. Here it is: On top of these indicators i have added my own indicator that will signal a short term trend reversal that is based on pivot points and moving averages. This will usually signal reversals earlier than divergences and is very effective when following the trend and using support and resistances and can be used as an extra confirmation that there will be a reaction from the support or resistance and that the divergence will play out like you want it to. These trend reversal dots can also be used to take profit. Trade setup example: As seen in the picture below price comes down to a previously drawn support line, then there is a trend reversal dot that signal a potential reversal and finally a divergence is signalled once there is a clear reaction to the support. When all these signals come together there is a high probability that the trade will end up in profit. To take profit in this trade setup you can use the trend reversal dots, the drawn resistances or your own intuition and technical analysis with Marketcipher B and DBSI. A stop loss in this trade setup could be at the swing low, below the blue or teal line. There are alerts for everything so that you wont miss a trade setup. Hope you like it :) I have some ideas on how to improve the indicator so there will be updates in the future.
Pineスクリプト™ インジケーター
christofferkaの投稿
6
Auto Fibonacci [Misu]█ This indicator shows an automatic Fibonacci retracement levels.  This indicator is designed based on highs, lows, and trend interpretation to orientate the fibonacci retracement in the good direction. Fibonacci analysis uses a logical sequence of numbers to predict trends and price action. █ Usages: The Fibonacci retracement is used to identify hidden support and resistance levels that an investor can use for entry, exit, and stop placement.  Depending on your usage, you can track breakouts above and below retracement levels to provide early entry points for major breakouts and breakdowns. █ Features: > Choose Fib levels > Color Fib Levels all in one > Color Fib Levels Individually █ Parameters:  Deviation: A parameter used to calculate pivots. Depth: A parameter used to calculate pivots. UI Settings: Select Fibs levels and colors.
Pineスクリプト™ インジケーター
Fontiramisuの投稿
2
Liquidity Heatmap (Nephew_Sam_)Liquidity Heatmap This indicator plots a heatmap of resting liquidity above and below swing lows and multiple timeframes The darker the color is or the larger the zone is, the more liquidity is lying there. If you think there are too many zones, you can increase the timeframes in the settings or just disable it. Liquidity simply means orders such as stoplosses, buy/sell stops. Disclaimer: You are free to use this code but your should be open source too
Pineスクリプト™ インジケーター
nephew_sam_の投稿
43
Liquidity Pools (Nephew_Sam_)This indicator makes use of Pivot Points to identify liquidity pools. This simply means, highs and lows that the price should eventually take out (go towards) before reacting. In this current version (v1), I implemented multi timeframe pivot points, each with a custom line style and color. The x left/right bars are used to identify swing points, the number provided will find the highest/lowest candle in the provided left/right bars. Upcoming In the next update(s) we will add more features like - identifying relative highs/lows, closest liquidity pools, extending lines, adding labels etc
Pineスクリプト™ インジケーター
nephew_sam_の投稿
30
CPR with MAs, Super Trend & VWAP by MackraniThis script will allow to add CPR with Standard Pivots and 4 Indicators. Standard Pivot has 9 levels of support and 9 levels of resistance lines. It has CPR , 3 levels of Day-wise pivots , 3 levels of Weekly pivots and 3 Levels of Monthly Pivots . In Addition to the CPR and Pivot , this script will allow user to Add 4 more Indicators - SMA , EMA , VWAP and SuperTrend as well. All the Support and resistance levels can be enabled / disabled from settings. It will allow to select multiple combinations of support and resistance levels across 3 levels at any of the 3 time-frames individually and combined. All 4 Indicators can be can be enabled / disabled from settings. This will allow the indicators to be plotted individually and combined along with any combination of CPR & Pivots . These number of combinations will allow user to visualize the charts with desired indicators, pivot support & resistance levels on all or any of the 3 time frames. For Ease of access, listed few points on how the script works.. - CPR and day-wise level 1 & 2 (S1 & R1) enabled by default and can be changed from settings - Day-wise Level 2 & 3 (S2, R2, S3 & L3) can be enabled from settings - Weekly 3 levels and Monthly 3 levels can be enabled from settings - CPR & pivot levels colored in blue lines - All support levels colored in Green - All resistance levels Colored in Red - Day-wise pivot , support & resistance are straight lines - Weekly pivot , support & resistance are cross (+) lines - Weekly pivot , support & resistance are circle (o) lines - SMA , EMA , VWAP and SuperTrend Enabled by Default - SMA Colored in Orange - EMA Colored in Red - EMA Colored in Teal - SuperTrend Colored in standard Red & Green with triangle arrows - Any combinations can be selected from settings-> Inputs & style
Pineスクリプト™ インジケーター
raashidmackraniの投稿
2
Candle Price FinderCandle Price Finder A simple script that finds a candle (or candles) with user defined price levels. Search prices of a candle's high, low, open, close (or any element of the candle). How To Use: You can search prices with whole numbers and/or decimals. The search is tail end so if you are looking for a whole number that ends with 00 you type in 00 in search. Indicator can be used to detect levels of interest, locked in range/points of consolidation. Originally coded to be used with anchored vwap. Alerts included In action:
Pineスクリプト™ インジケーター
geneclashの投稿
3
SuperTrend Support & Resistance(My goal creating this indicator) : Provide a way to categorize and label key structures on multiple time frames so I can create a plan based on those observable facts. The Underlying Concept / What is Momentum? The Momentum shown is derived from a Mathematical Formula, SUPERTREND. When price closes above Supertrend Its bullish Momentum when its below Supertrend its Bearish Momentum. On the first bar bearish momentum is detected a resistance Level is made at the highest point of the previous bullish condition. On the first bar bullish momentum is detected a support Level is made at the lowest point of the previous bearish condition. As I become a better analyst I will find better techniques and this source code may become open-source, but as of now it remains protected. This indicator scans for bullish & bearish Momentum on the Timeframes selected by the user and when there is a shift in momentum on any of those time frames (price closes below or above SUPERTREND ) it notifies the trader with a Supply or Demand level with a unique color and Size to signify the severity of said level. What is Severity? Severity is How we differentiate the importance of different Highs and Lows. If Momentum is detected on a higher timeframe the Supply or Demand Level is updated. The Color and Size representing that higher timeframe will be shown. Demand and Supply Levels made by higher Timeframes are more SEVERE then a demand level made by a lower Timeframe. Technical Inputs - If you want to optimize the rate of signals to better fit your trading plan you would change the Factor input and ATR Length input. Increase factor and ATR Length to decrease the frequency of signals and decrease the Factor and ATR Length to increase the frequency of signals. - to ensure the correct calculation of Support and Resistance levels change BAR_INDEX. BAR_INDEX creates a buffer at the start of the chart. For example: If you set BAR_INDEX to 300. The script will wait for 300 bars to elapse on the current chart before running. This allows the script more time to gather data. Which is needed in order for our dynamic lookback length to never return an error(Dynamic lookback length cant be negative or zero). The lower the timeframe the greater the amount of bars need. For Example if I open up a 30 sec chart I would enter 5000 as my BAR_INDEX since that will provide enough data to ensure the correct calculation of Support and Resistance levels. Time Frame Inputs - The indicator has 3 Time Frame Displays where you can choose how SEVERE You want the Supply and Demand Levels. For Example: 1min, 3min, 5min, 15 min Levels, 60 min levels Weekly Levels, etc.....The higher the Timeframe Selected the more SEVERE the Level. - Use the Amount of time Frames input to increase or limit the amount of time frames that will be displayed onto the chart. Display Inputs - The toggle (Trend or Basic) option Lets the trend determine the colors of the Support and Resistance Levels or Basic where the color is strictly based on if its a high or a low ( Trend = HH,HL,LL,LH) - Toggle options (Close) and (High & Low) creates Support and Resistance Levels using the Lowest close and Highest close or using the Lowest low and Highest high. Toggle on both or toggle off both in order to use both these values when determining the trend of your chart. For Example this would mean (Price has to close higher then the highest high. Not only make a higher high or a higher close) and the inverse (Price has to close lower then the lowest low. Not only make a lower low or a lower close) How Trend Is being Determined ? (Previous Supply Level > Current Supply Level ) if this statement is true then its s LH so the trend is bearish if this statement is false then its a HH so the trend is bullish (Previous Demand Level > Current Demand Level ) if this statement is true then its a LL so the trend is bearish if this statement is false then its a HL so the trend is bullish (Close > Current Supply Level ) if this statement is true technically price made a HH so the trend is bullish (Close < Current Demand Level ) if this statement is true technically price made a LL so the trend is bearish - Fully customize how you display and label Market Structure in specific timeframes. Line Length, Line Width, Line Style, Label Distance, Label Size, Label Background Size, and Background Color can all be customized. - Lastly Is the Trend Chart. To Easily verify the current trend of any timeframes displayed by this indicator toggle on Chart On/Off . You also get the option to change the Chart Position and the size of the Trend Chart *****The Current charts timeframe has to lower then a month to ensure correct calculation of Supply and Demand Levels***** How it can be used ? (Examples of Different ways you can use this indicator) : Easily categorize the severity of each and every Supply or Demand Level in the market (The higher the time frame the stronger the level) : Quickly Determine the trend of any Timeframe : Get a consistent view of a market and how different time frames are behaving but just use one chart. : Take the discretion from hand drawing support and resistance lines out of your trading : Find and categorize strong levels for potential breakouts : Trend Analysis, Use multiple time frames to create a narrative based on observable facts from these time frames : Different Targets to take money off the table : Use labels to differentiate between different trend line setups : Find Great places to move your stop loss too.
Pineスクリプト™ インジケーター
Who7is7Like7Godの投稿
17
[EDU] Close Open Estimation Signals (COE Signals)EN: Close Open Estimation ( aka COE ) is a very simple swing-trading indicator based on even simpler idea. This indicator is from my educational series, which means that I just want to share with another way to look at the market in order to broaden your knowledge . Idea : Let's take n previous bars and make a sum a of close - open -values of each bar. Knowledgeable of you may already see the similarity to RSI calculation idea . Now let's plot this sum and see what we have now. We can see, that whenever COE crosses over 0-level, uptrend begins, and if COE crosses under 0-level, downtrend begins. The speed of such signals can be adjusted by changing lookback period: the lower the lookback, the faster signals you get, but high-quality ones can be obtained only via not-so-fast lookback as when the market is consolidating or volatility is to high, there can be many garbage signals, like 95+% of other indicators have. Let's explore more and calculate volatility of COE(v_coe in the code): current COE - previous CEO . Now it appears that when v_coe crosses over 0-level, it's a signal, that this is a new low and soon the uptrend will follow. Analogically for crossing under 0-level . I guess now you understood what these all are about: COE crossings show global trend signals , while Volatility COE ( v_coe or VCOE ) crossings show reversal points . For signals I further calculated volatility of VCOE(VVCOE) and then volatility of VVCOE(VVVCOE). Why? Because for me they seem to be more accurate, but you are welcome to experiment and figure best setups for yourself and by yourself, I just share my opinion and experience . COE can be helpful only in high liquidity markets with good trend or wide sideways . If you want to experiment with COE, just copy the code and play with it. Curious of you will probably find it helpful eventhough the idea is way too simple. By it's perfomance COE can probably beat QQE at open price settings. (use open of the price at indicator to get zero repaint! ) Examples : If you any questions, feel free to DM me or leave comments. Good luck and take your profits! - Fyodor Tarasenko RU: Close Open Estimation ( aka COE ) — это очень простой индикатор свинг-трейдинга, основанный на еще более простой идее. Этот индикатор из моей образовательной серии, а это значит, что я просто хочу поделиться с другим взглядом на рынок , чтобы расширить ваши знания . Идея : Возьмем n предыдущих баров и составим сумму a из close - open -значений каждого бара. Знающие люди могут уже заметить сходство с идеей расчета RSI . Теперь давайте построим эту сумму и посмотрим, что у нас сейчас есть. Мы видим, что всякий раз, когда COE пересекает выше 0-уровня, начинается восходящий тренд , а если COE пересекает ниже 0-уровня, начинается нисходящий тренд. Скорость таких сигналов можно регулировать изменением ретроспективы: чем меньше ретроспектива, тем быстрее вы получаете сигналы, но качественные можно получить только через не- такой быстрый взгляд назад, как когда рынок консолидируется или волатильность слишком высока, может быть много мусорных сигналов, как у 95+% других индикаторов. Давайте рассмотрим больше и рассчитаем волатильность COE(v_coe в коде): текущий COE - предыдущий CEO . Теперь кажется, что когда v_coe пересекает уровень 0, это сигнал о том, что это новый минимум и вскоре последует восходящий тренд . Аналогично для пересечения под 0-уровнем . Думаю, теперь вы поняли, о чем все это: COE пересечения показывают глобальные сигналы тренда , а пересечения Volatility COE ( v_coe или VCOE ) показывают точки разворота . Для сигналов я дополнительно рассчитал волатильность VCOE(VVCOE), а затем волатильность VVCOE(VVVCOE). Почему? Потому что для меня они кажутся более точными, но вы можете поэкспериментировать и подобрать оптимальные настройки для себя и для себя, я просто делюсь своим мнением и опытом . COE может быть полезен только на рынках с высокой ликвидностью и хорошим трендом или широким боковиком . Если вы хотите поэкспериментировать с COE, просто скопируйте код и поэкспериментируйте с ним. Любознательные из вас, вероятно, сочтут это полезным, хотя идея слишком проста. По своей результативности СОЕ может составить конкуренцию широко известному QQE, используя open цены. (используйте open цены на индикаторе, чтобы получить нулевую перерисовку! ) Примеры : Если у вас есть вопросы, пишите мне в личные сообщения или оставляйте комментарии. Удачи и профита всем! - Федор Тарасенко
Pineスクリプト™ インジケーター
tarasenko_の投稿
1
ABC 123 Harmonic Ratio Custom Range Interactive█ OVERVIEW This indicator was designed based on Harmonic Trading : Volume One written by Scott Carney. This is about harmonic ratios which expanded through retracement and projection. Derivation is pretty much explained here such as Primary, Primary Derivation, Secondary Derivation and Secondary Derivation Extreme. Derivation value depends on minimum retracement or maximum projection. This derivation value utilize Fibonacci value which later expand to Harmonic Ratio. █ INSPIRATION Inspired by design, code and usage of CAGR . Basic usage of custom range / interactive, pretty much explained here . Credits to TradingView. This build is based and visualized upon Harmonic Trading Ratios. This build also was stripped down from XABCD Harmonic Pattern Custom Range Interactive . █ CREDITS Scott Carney, Harmonic Trading : Volume One (Page 18) █ FEATURES Table can positioned by any position and font size can be resized. Labels can be either changed to alphabets or numbers. █ HOW TO USE Draw points from Point A to Point C. Dont worry about magnet, point will attached depends on High or Low of the candle. █ USAGE / TIPS EXAMPLES (Description explained in each image)
Pineスクリプト™ インジケーター
RozaniGhani-RGの投稿
5
SUPER GCOV5 MAPSCALP > MAPPING & SCALPING SUPER GCOV5 MAPSCALP indicator is built specifically for mapping/prediction measurement and fast trading i.e. scalping/intraday in the commodity market or cryptos market. It uses an indicator instrument consisting of ATR TRAILING STOP (ATR), EXPONENTIAL MOVING AVERAGE, PIVOT POINT, FIBONACCI KEY LEVEL, and LINEAR REGRESSION CHANNEL(LRC). Rebuild of Instrument & Parameter This indicator is also an upgraded instrument that is sourced from the previous indicator-FUTURES SCALPV2.This R&D of course makes trading activities more effective, and dynamic to increase the confidence of traders in current trading activities. The indicator has been upgraded in terms of parameters as well as additional instruments. Among them are; 1. ATR Trailing Stop 2. ATR BUY/SELL signal 3. Exponential Moving Average(EMA) – fastMA/slowMA Length 5. Breakout/breakdown signal 6. Pivot low/high level 7. Fibonacci extends & retracement 8. Linear Regression Channel(LRC) 9. Alert condition ( a dozen alerts ) > The best timeframe for entry is 3 minutes for FCPO and 15 minutes for other futures & cryptos. > The best timeframe mapping/prediction is 1 hour & 4 hours. >The candle/bars have been colored to make it easier for traders to see the price trends whether in bullish or bearish conditions. Easier SOP of ENTRIES/POSITIONING: 1. entry by signal BUY/SELL after signal bar ( 2nd bar) for confirmation. 2. The best entries BUY at support(pivot low-Blue line) after price rebound then signal appears. The best buy also when the price is at lower low pivot + fibo support level + lower trendline(LRC) + and the price went rebound. 3. The best entries SELL at resistance(pivot high-red line) after price pullback then signal appears. The best buy also when the price is at a higher high pivot + fibo resistance level + upper trendline LRC + and the price went pullback. 4. Profit-taking areas are usually measured by support and resistance levels. Please refer to the bold line( support & resistance), fibo key level, and trendline. *To avoid false signals/wrong positions, you can use the EMA line as a guide and follow the trends, which are the buying weight when the price is above the 20/50 ema, and the selling weight when the price is below the 20/50 ema. EMA can be reset on the input setting. STEPS of MAPPING/PROJECTION: 1. Use a bigger timeframe such as 4 hours or 1 hour 2. Use LRC to identify buy/sell weights when the price makes a zig-zag patent 3. Use monthly and weekly fibo levels to know support and resistance. This fibo is very important to see if the price will make an extension or retracement based on the regression channel earlier. So here we can evaluate which area to buy/sell/take-profit/exit and the reversal of a market price. You can also create an ALERT CONDITION to help you get a reminder of signals and price trend changes The original instrument has been retained but changed in terms of display & facelift features. Hopefully, the new one will assist you in making analysis and strategy of trading activities successfully. THIS IS NOT A BUY/SELL CALL, ONLY STUDY IDEAS AND ANALYSIS BASED ON MEASUREMENT TOOLS FOR EDUCATION AND GUIDANCE PURPOSES.PLEASE TAKE AT YOUR OWN RISK.
Pineスクリプト™ インジケーター
TraderAsistの投稿
17
Support and resistance zonesDiscretionary traders often use support and resistance zones that are based on past price action of the instrument traded. This simple script is used to plot support and resistance zones for a given instrument. The data for the zones themselves has to be determined by the past price action of the instrument and are not based on the provided data by Tradingview. The zones input has to come as a string. Each zone consists of a string with: ",,<"S"|"R"|"L">,<"Normal"|"Strong">"" The different zone strings have to be seperated by either new line or space. An example for the zones input looks like: 3919.25,3919.25,L,Normal 3897.50,3906.50,R,Normal 3891.00,3894.50,S,Strong I appreciate any feedback.
Pineスクリプト™ インジケーター
mgrunerの投稿
4