[SkuldX] SFP + Auto S&RSkuldX SFP + Auto S&R — Institutional Liquidity Sweep at Validated Structure
by SkuldX Trading Systems
What is it?
SkuldX SFP + Auto S&R combines two powerful concepts into a single indicator. It automatically identifies significant support and resistance levels by clustering historical pivot points — and then monitors those levels exclusively for Swing Failure Pattern events. The result is a significantly higher quality signal filter compared to standard SFP detection: every sweep you see on the chart is happening at a price level where the market has already demonstrated structural significance multiple times.
The problem with standard SFP detection
A basic SFP indicator sweeps any local high or low regardless of whether that level has any structural importance. This generates many signals at noise levels that institutions have no reason to target. The most powerful SFP setups occur specifically at levels where liquidity has accumulated over time — where stop orders from multiple previous reactions are clustered and waiting to be harvested.
SkuldX SFP + Auto S&R solves this by only triggering when a sweep occurs at an automatically validated S&R cluster.
How the S&R engine works
The indicator scans the configured history window and identifies all pivot highs and lows — price points where the market reversed direction with enough significance to form a clear swing. These pivots are then grouped into clusters: any two pivots within the cluster tolerance percentage of each other are merged into a single level, and their average price becomes the cluster center.
Each cluster is assigned a touch count — the total number of times price has visited that zone across both pivot formations and raw bar touches. Clusters that meet the minimum touch threshold become validated S&R levels and are drawn on the chart as horizontal lines.
The levels are sorted by touch count and only the strongest ones up to your configured maximum are shown. A label at the right edge of each line displays the price and touch count in brackets — for example 2415.50 means that level has been touched five times and carries significant institutional memory.
How the SFP detection works
On every bar the indicator identifies the nearest validated S&R level above price and the nearest validated S&R level below price. It then checks whether the current candle has swept through either of those levels while closing back inside them.
Bearish SFP fires when the candle wick extends above the nearest S&R resistance level but the candle closes below it. The upper wick must meet the minimum size threshold as a percentage of the total candle range, and the breach above the level must meet the minimum breach threshold. Both conditions together ensure the sweep was meaningful rather than a minor tick-through.
Bullish SFP fires when the candle wick extends below the nearest S&R support level but the candle closes above it, with the lower wick and breach both meeting their minimum thresholds.
What you see on the chart
Grey lines — validated S&R levels with touch count labels. These are your structural reference zones. The more touches a level shows, the more liquidity has accumulated there and the more significant a sweep of that level becomes.
SFP label — appears above or below the candle at the moment of detection. Shows the signal direction, the price of the swept level, and its touch count. Higher touch count at the swept level means higher probability of a sustained reversal.
Rejection zone (box) — shaded area between the wick extreme and the S&R level. This is the precise zone where stop orders were triggered and institutional positions were likely built. The zone extends to the right for a configurable number of bars.
Dashed line — marks the specific S&R level that was swept, making it easy to track which structural zone triggered the signal.
Settings reference
S&R Detection group
Pivot Lookback — how many bars on each side a pivot must be the extreme to qualify. Higher values find more significant swing points but confirm later. Default 10.
Cluster Tolerance % — maximum distance between two pivots to be grouped into the same cluster. Default 0.3%. Increase for volatile instruments where price rarely touches the exact same price twice.
Min Touches for Valid Level — minimum touch count required for a cluster to be drawn and used for SFP detection. Default 2. Increase to 3 or 4 for stricter structural requirements.
Max Levels to Show — limits the number of S&R lines displayed. The strongest levels by touch count are always shown first.
S&R History Lookback — how many bars of history to scan for pivots. Default 300. Increase for higher timeframes where significant levels form slowly.
SFP Filters group
Min Wick Size % of candle — the rejection wick must be at least this percentage of the total candle range. Prevents weak rejections from triggering signals.
Min Breach Size % of level — the wick must extend at least this percentage beyond the S&R level. Ensures the sweep was meaningful enough to trigger stop orders.
Show Bullish / Bearish SFP — independent toggles for each direction.
SFP Display group
Show Labels — toggles signal labels
Show Rejection Zone — toggles the sweep zone box
Zone Extend — how many bars right the zone and line extend
Label Size / Zone Transparency / Line Width — visual customization
Bullish / Bearish Color — independent colors for each direction
How to use it in practice
Reading the levels — scan the grey S&R lines before any signal appears. Levels with 4+ touches are the most significant targets. These are where institutions are most likely to engineer a sweep. When price approaches one of these levels, heighten your attention.
Reading the signal — when an SFP fires, check the touch count in the label. A sweep at a 2-touch level is interesting. A sweep at a 6-touch level is significant. The touch count is the single most important quality indicator for the setup.
Entry timing — the signal fires on candle close. The most direct entry is at the open of the next candle in the reversal direction. A more conservative approach waits for the following candle to confirm continuation before entering.
Stop placement — place the stop-loss beyond the wick tip, outside the rejection zone. The zone itself tells you where institutional positioning occurred — price returning beyond that zone invalidates the entire setup premise.
Take-profit targets — use the next S&R level in the direction of the trade as the primary target. The indicator shows you all significant levels simultaneously, making it straightforward to identify the next structural obstacle.
Calibrating for your instrument — start with default settings and observe whether signals appear at levels that look structurally significant to you visually. If too many signals appear at noise levels, increase Min Touches to 3 or raise the wick and breach thresholds. If signals are too rare, reduce Pivot Lookback or increase Cluster Tolerance.
Timeframe guidance — on 15m the lookback of 300 bars covers approximately 75 hours. On 1h it covers 12.5 days. Adjust S&R History Lookback proportionally to ensure the indicator scans enough price history to build meaningful clusters.
Part of the SkuldX Suite
SkuldX SFP + Auto S&R is designed to work alongside the full SkuldX indicator suite. The most reliable setups emerge when multiple layers of context align:
A bullish SFP at a 4+ touch S&R level that coincides with the Asian Low from SkuldX Sessions carries double structural significance — both the automated cluster and the session boundary agree on the level
A bearish SFP at a high-touch resistance zone with ADR Used % above 85% from SkuldX ADR Levels signals both a liquidity sweep and statistical range exhaustion simultaneously
An SFP confirmed by a Bullish or Bearish Trend reading in SkuldX OI Delta — new positions opening in the reversal direction — adds institutional conviction that the sweep was deliberate rather than random
The touch count shown in the SFP label directly complements the Touch Counter module in SkuldX Level Patterns, providing consistent structural analysis across both manual and automated level detection
インジケーター
Fibonacci Levels Engine [StrixEDGE]What It Does
Fibonacci Levels Engine automatically detects the most recent swing high and swing low within a configurable lookback window, draws the standard Fibonacci retracement grid (0 %, 23.6 %, 38.2 %, 50 %, 61.8 %, 78.6 %, 88.6 %, 100 %) plus the 127.2 % and 161.8 % extensions, and projects every level into the future so you can see where price is heading relative to the structure.
What separates this indicator from a plain Fibonacci overlay is the Edge Analysis layer — three original components that work together to tell you how meaningful a given Fibonacci zone is right now, not just where it sits on the chart:
1. Edge Score (0–100) — A composite confluence gauge displayed in the dashboard.
2. Proximity Heatmap — Dynamic line opacity that makes levels glow as price approaches them.
3. ATR Volatility Band — A band around the Golden Zone midpoint that adapts to current volatility.
How It Works
Core: Swing Detection & Fibonacci Grid
The indicator scans the last N bars (default 20, configurable 5–300) to find the highest high and lowest low. It determines trend direction by comparing which extreme occurred first: if the swing low is further back in time than the swing high, the structure is bullish (price moved from low to high); otherwise it is bearish. Fibonacci ratios are then calculated from that range and drawn as horizontal levels from the swing origin to a user-defined projection length (default 30 bars into the future).
Two shaded zones highlight areas of interest:
- Golden Zone (0.618–0.786) — the highest-probability retracement area in classical Fibonacci theory.
- Deep Zone (0.786–0.886) — often the last line of defense before a full retracement.
Both zones, the 50 % midline, and the extension levels can be toggled on or off independently.
Edge Score — Confluence Gauge
The Edge Score combines three independent measurements into a single 0–100 reading:
RSI Momentum Alignment | 0–35 | In a bullish structure, a low RSI (below 35) scores highest because it signals oversold conditions near support. In a bearish structure, a high RSI (above 65) scores highest. Intermediate RSI values receive proportionally lower scores. |
| Proximity to Golden Zone | 0–35 | Measures the absolute distance between the current close and the Golden Zone midpoint as a ratio of the total Fibonacci range. The closer price is to the midpoint, the higher the score. |
| EMA Trend Alignment | 0–30 | Checks the stacking order of the 8, 21, and 55-period EMAs. A fully aligned stack (e.g., EMA 8 > EMA 21 > EMA 55 in a bullish structure) scores 30; partial alignment scores 20; misalignment scores 10. |
The resulting score is classified as STRONG (≥ 75), MODERATE (≥ 50), WEAK (≥ 25), or LOW (< 25) and displayed with a color-coded label in the dashboard. A high Edge Score means RSI, price proximity, and trend direction are all converging at the Fibonacci zone — not just that price touched a line.
Proximity Heatmap
Every Fibonacci level's line opacity is recalculated on each bar based on how far the current close is from that level. When price is near a level, the line becomes more opaque (visually brighter); when price is far away, the line fades. This is computed as a transparency value derived from the ratio of (distance to level) / (total Fibonacci range), scaled between 10 and 75. The effect lets you instantly see which levels are "active" without scanning numbers — the relevant lines stand out on their own.
ATR Volatility Band
A translucent band is drawn around the Golden Zone midpoint, extending ± 0.5 × ATR (default 14-period). This addresses a practical problem: a Fibonacci level is a single price, but real entries need a buffer that accounts for market noise. The band widens in volatile conditions and contracts in quiet ones, giving you a dynamic "fair value area" inside the Golden Zone rather than a fixed line.
Dashboard Panel
A compact table in the top-right corner of the chart displays:
- Trend — Current structural direction (Bull / Bear) with color coding.
- Edge — The composite Edge Score and its label.
- RSI — Current RSI value, color-coded for overbought/oversold extremes.
- G-Zone — Live status showing ✅ with the midpoint price when the close is inside the Golden Zone
or ⏳ Waiting when it is outside.
- ATR — Current Average True Range value.
- Range — The total Fibonacci range (swing high minus swing low).
Dashboard text size is adjustable (Tiny / Small / Normal / Large).
How to Use It
Identify the structure — Add the indicator to your chart. The dashboard immediately tells you whether the current swing structure is bullish or bearish and shows the Edge Score.
Watch the Golden Zone — When price pulls back toward the 0.618–0.786 area, check the dashboard: a high Edge Score (50+) means RSI and trend EMAs are aligned with the retracement, which increases the odds of a bounce. The G-Zone row will switch from ⏳ to ✅ when price enters the zone.
Use the Volatility Band for entries — Rather than placing a limit order on the exact 0.618 or 0.786 line, use the ATR band as your entry zone. It automatically adjusts to current volatility, giving you a wider buffer in choppy markets and a tighter one in clean trends.
Read the heatmap — Glowing lines tell you which levels price is currently interacting with. If a line is bright and the Edge Score is high, that level carries more weight. If the line is faded, price is far away and the level is not in play.
Settings Overview
- Pivot Lookback (5–300, default 20) — Number of bars scanned for swing high/low detection.
- Right Projection (5–200, default 30) — How far levels extend into the future.
- Golden Zone / Deep Zone / 50 % / Extensions — Toggle individual level groups.
- Edge Score Panel — Show or hide the dashboard.
- ATR Volatility Band — Show or hide the dynamic band.
- Proximity Heatmap — Enable or disable the distance-based line opacity effect.
- ATR / RSI Length — Periods for the ATR and RSI calculations used in the Edge Score and Volatility Band.
- Style — Full color customization for bullish/bearish, zones, bands, levels, labels, and line width.
Set alerts — Four built-in alert conditions are included:
- Price enters the Golden Zone (0.618–0.786)
- Price enters the Deep Zone (0.786–0.886)
- Edge Score reaches 75 or above (strong confluence)
- Price crosses the 0 % or 100 % level (breakout / full retracement) インジケーター
Support - Resistance & Fibonacci [StrixEDGE]StrixZONE automatically detects Support and Resistance zones from price structure and overlays Fibonacci retracement levels — with a deliberate visual separation between the two. S/R zones are drawn historically (left of current price), while Fibonacci levels project into the future (right of current price). This separation ensures zero overlap and a clean, readable chart.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW IT WORKS
The indicator operates on two independent analytical layers:
LAYER 1 — SUPPORT & RESISTANCE (Historical)
Automatically detects swing highs and swing lows using configurable pivot lookback detection. The most recent three resistance levels (R1, R2, R3) and three support levels (S1, S2, S3) are tracked and displayed as colored zones extending across the historical portion of the chart, stopping at the current bar.
R1/S1 is the most recent and visually strongest. R2/S2 and R3/S3 progressively fade, reflecting their age and diminishing relevance. Resistance zones are red, support zones are teal. Each zone has a configurable thickness based on ATR, creating a price band rather than a single line — because in practice, support and resistance are zones, not exact prices.
LAYER 2 — FIBONACCI RETRACEMENT (Forward Projection)
Calculates the highest high and lowest low over a 120-bar lookback and draws seven standard Fibonacci levels between them: 0%, 23.6%, 38.2%, 50%, 61.8%, 78.6%, and 100%. All levels project forward from the current bar by a configurable number of bars (default 20), showing where key retracement levels sit ahead of price.
The 50% and 61.8% levels are drawn with thicker solid lines. All others use thinner dashed lines. The 50%–61.8% region is highlighted as the Golden Zone — the area where retracements most frequently find support or resistance in trending markets. Each level displays its exact price at the right edge.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
VISUAL SEPARATION — WHY IT MATTERS
Most indicators that combine S/R with Fibonacci draw everything on top of the same price area, creating visual clutter that makes the chart harder to read. StrixZONE deliberately separates the two layers in time:
→ S/R zones occupy the left side of the chart (historical price action where the levels were established)
→ Fibonacci levels occupy the right side (projected forward where price is heading)
→ The current bar is the boundary — S/R stops here, Fibonacci starts here
This means you can see at a glance where historical structure sits versus where retracement math says the next key levels are. When a Fibonacci level aligns with a nearby S/R zone, that confluence is immediately visible without the two drawing systems overlapping.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
SUPPORT & RESISTANCE DETAILS
Detection uses the standard pivot high/low method with a configurable lookback (default 10 bars). A swing high requires the bar's high to be higher than all bars within the lookback window on both sides. The same logic applies in reverse for swing lows.
Levels shift automatically as new pivots are detected. When a new resistance pivot forms, R1 becomes R2, R2 becomes R3, and the new level takes the R1 position. This ensures the most current market structure is always prioritized.
Visual hierarchy:
→ R1 / S1 — most opaque, largest label (most recent, most relevant)
→ R2 / S2 — slightly faded (still relevant but older)
→ R3 / S3 — most faded (historical context, may be invalidated)
Zone width is ATR-based (default 0.2× ATR), so zones automatically adapt to the instrument's volatility. A high-volatility asset gets wider zones; a stable asset gets tighter zones.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
FIBONACCI DETAILS
Levels are calculated from the absolute highest high and lowest low over the lookback period (default 120 bars). This captures the dominant price range for retracement analysis.
All seven levels are drawn as horizontal lines projecting right from the current bar:
→ 0% and 100% — range boundaries (dashed, subtle gray)
→ 23.6% and 78.6% — minor retracement levels (dashed)
→ 38.2% — standard retracement (dashed)
→ 50% — midpoint (solid, thick, yellow)
→ 61.8% — golden ratio (solid, thick, orange)
The Golden Zone (50%–61.8%) is filled with a translucent highlight and labeled. This is the area where price most commonly reverses during healthy retracements in trending markets.
Each level includes a price label at the right edge showing the percentage and exact price value, making it easy to set orders at these levels.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
DASHBOARD
A compact table in the top-right corner displays:
→ R1 — nearest resistance price
→ S1 — nearest support price
→ FIB 50% — the midpoint price for quick reference
→ POSITION — current price as a percentage of the Fibonacci range (e.g., 72% means price is in the upper portion of the range)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
SETTINGS
Support & Resistance:
• Pivot Lookback (default 10) — bars required on each side to confirm a swing. Higher values detect fewer but more significant levels.
• Zone Width (default 0.2 ATR) — thickness of each S/R zone. Increase for wider zones on volatile instruments.
Fibonacci:
• Fibonacci Bars Right (default 20) — how far the levels project into the future.
• Golden Zone toggle — show or hide the 50–61.8% highlight.
Display:
• Show S/R Zones — toggle the entire S/R layer.
• Show Fibonacci — toggle the entire Fibonacci layer.
• Show Dashboard — toggle the status table.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
WHAT MAKES THIS ORIGINAL
StrixZONE is not simply S/R lines drawn next to Fibonacci lines. Its originality lies in the deliberate temporal separation: S/R zones render historically from where they were established, while Fibonacci levels project exclusively into the future. This design choice eliminates the visual clutter that occurs when both systems draw over the same price bars — a problem common to multi-layer overlay indicators. The ATR-adaptive zone width, the three-tier visual hierarchy for level relevance, and the clean forward projection of Fibonacci create a tool that is structurally distinct from standard S/R or Fibonacci indicators.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
RECOMMENDED USE
Designed for all timeframes and all markets with OHLC data: crypto, forex, stocks, indices, commodities. Particularly effective on 15-minute to 4-hour charts for day and swing trading. Works well as a standalone structural analysis tool or alongside momentum indicators like StrixEDGE or StrixPULSE.
Look for confluence: when a Fibonacci level (especially 50% or 61.8%) sits near an S/R zone, that price area carries double significance as a potential reversal or breakout point.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
ALERTS
Two alert conditions available:
→ Resistance Breakout — price closes above R1
→ Support Breakdown — price closes below S1
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
DISCLAIMER
This indicator is a technical analysis tool, not financial advice. No indicator guarantees profitable outcomes. Past performance does not indicate future results. Always apply proper risk management. インジケーター
All-Time High/Low Fibonacci Retracement (with Flip)Tired of manually dragging the Fibonacci tool across macro charts every time an asset makes a new high or low? This indicator automates the entire process. It scans the absolute historical data of any asset to identify its true All-Time High (ATH) and All-Time Low (ATL), then dynamically projects standard Fibonacci retracement levels between them.
Whether you are analyzing a stock's decades-long macro cycle or looking for major historical support and resistance levels, this script keeps your charts perfectly anchored without the manual clutter.
Key Features
100% Automated Tracking: Uses historical state variables (var) to lock onto the ultimate lowest and highest prices ever printed on your current chart.
Real-Time Dynamic Updates: If the asset breaks out into price discovery (new ATH) or capitulates to a new bottom (new ATL), the script recalculates and shifts all Fibonacci lines instantly.
One-Click Flip Toggle: Built-in calculation flip. Measure retracements from the top down (bearish retracement) or flip it from the bottom up (bullish expansion) right from the settings menu.
Clean Visuals: Hard-coded with classic Fibonacci ratios (23.6%, 38.2%, 50.0%, 61.8%, 78.6%) using a subtle, non-intrusive color gradient that won't crowd your daily price action.
How to Use the Settings
Flip Retracement (Checkbox): * Unchecked (Default): Places 0% at the All-Time High and 100% at the All-Time Low (Ideal for finding support levels during a pullback from macro highs).
Checked: Places 0% at the All-Time Low and 100% at the All-Time High (Ideal for tracking major resistance levels and targets on the way back up).
💡 Pro-Tip: Because TradingView loads a limited number of historical bars on lower timeframes (like 5-minute or 15-minute charts), always load this indicator on a Daily (D), Weekly (W), or Monthly (M) chart first. This ensures the script catches the true historical inception highs and lows of the asset! インジケーター
Elaris Auto Trend Fibonacci ProElaris Auto Trend Fibonacci Pro
Overview
Elaris Auto Trend Fibonacci Pro is an advanced market structure and Fibonacci analysis tool designed to automatically identify directional trends, detect significant swing points, and project professional-grade Fibonacci retracement and extension levels directly on the chart.
Unlike manual Fibonacci drawing tools that require traders to constantly adjust anchor points, this indicator continuously analyzes confirmed swing structure and automatically maps the most relevant Fibonacci framework based on the current market trend.
The goal is to help traders quickly identify potential pullback zones, trend continuation areas, profit targets, and key reaction levels without manually redrawing Fibonacci levels throughout the trading session.
---
How The Indicator Works
1. Swing Structure Detection
The indicator first identifies confirmed swing highs and swing lows using a configurable pivot confirmation algorithm.
A swing is only considered valid after confirmation, which helps eliminate many false or premature swing points that often appear during volatile market conditions.
The minimum swing size can also be filtered using ATR-based validation, ensuring that insignificant market fluctuations are ignored.
---
2. Trend Identification
After detecting valid market structure, the indicator determines the dominant directional trend.
Bullish trends are identified when recent confirmed swing lows lead into higher confirmed swing highs.
Bearish trends are identified when recent confirmed swing highs lead into lower confirmed swing lows.
An optional EMA trend filter can be enabled to require alignment between price structure and moving average direction.
This additional layer helps reduce counter-trend Fibonacci projections.
---
3. Automatic Fibonacci Mapping
Once a valid trend is detected, Fibonacci levels are automatically projected between the most relevant confirmed swing points.
The indicator plots:
• 0.236 Retracement
• 0.382 Retracement
• 0.500 Midpoint
• 0.618 Golden Ratio
• 0.786 Deep Retracement
• 1.000 Retracement
These levels represent areas where pullbacks, reactions, trend continuations, or reversals may occur.
---
4. Golden Zone Highlighting
The area between the 50% and 61.8% retracement levels is automatically highlighted as the Golden Zone.
Many traders monitor this region because it often represents an area where institutional participants may re-enter an existing trend after a pullback.
The highlighted zone provides a quick visual reference for potential trend continuation opportunities.
---
5. Extension Targets
The indicator can optionally project Fibonacci extension levels beyond the current trend.
Available extension targets include:
• 1.272 Extension
• 1.618 Extension
• 2.000 Extension
These levels can be used as potential profit-taking areas, trend continuation objectives, or future reaction zones.
---
6. Trend Dashboard
A built-in dashboard provides real-time information including:
• Current trend direction
• Swing strength relative to ATR
• Fibonacci anchor direction
• Golden zone status
• Indicator operating mode
The dashboard helps traders evaluate current market conditions without needing additional analysis tools.
---
How To Use
Trend Continuation
1. Wait for a confirmed bullish or bearish trend.
2. Allow price to retrace toward the highlighted Fibonacci levels.
3. Monitor the Golden Zone for potential continuation setups.
4. Use extension levels as potential target areas.
Pullback Analysis
The 38.2%, 50%, and 61.8% retracement levels can help identify areas where temporary corrections may end and the primary trend may resume.
Target Projection
The Fibonacci extensions can be used to estimate possible future trend objectives after a successful continuation move.
---
Important Notes
• The indicator uses confirmed swing points and does not rely on future-looking calculations after confirmation.
• Fibonacci levels automatically update when a new confirmed market structure is established.
• The indicator is designed for trending markets and may generate fewer meaningful projections during prolonged ranging conditions.
• This tool is intended for technical analysis and should not be used as a standalone trading system.
---
Best Markets
The indicator can be applied to:
• Cryptocurrency Markets
• Forex Markets
• Stock Markets
• Index Markets
• Commodity Markets
It is particularly effective on higher liquidity instruments where market structure tends to be more consistent.
---
Best Timeframes
Recommended timeframes:
• 15 Minutes
• 1 Hour
• 4 Hours
• Daily
Higher timeframes generally produce more reliable market structure and Fibonacci projections.
---
Alerts
The indicator includes alerts for:
• Trend direction changes
• Golden Zone interactions
• Key Fibonacci level breaks
These alerts can be integrated into trading workflows for additional monitoring and confirmation.
---
Thank you for using Elaris Auto Trend Fibonacci Pro.
インジケーター
インジケーター
Price Density Clouds [EXCAVO]Continuous Kernel-Density Map of Where Price Has Actually Traded
The Price Density Clouds builds a smooth, continuous probability density of
price over a lookback window and paints it as gradient clouds directly behind
the candles. Dense, saturated clouds mark value zones - the equilibrium levels
where the market has spent the most time and where price tends to stall and
revert. Thin, transparent gaps mark inefficiency zones - levels price travels
through quickly. A dashed POC line marks the single highest-probability price,
and the Value Area High / Low bracket the core of the distribution.
This is not a bin-based volume profile. Instead of chopping price into discrete
buckets, KDE sums a smooth gaussian kernel around every price point, producing a
continuous density curve with no bin-edge artefacts. The bandwidth is set
automatically by Silverman's rule, so the smoothing adapts to the instrument's
own volatility.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
▸ HOW TO USE
Step 1 → Add the indicator. Gradient clouds appear behind the candles
over the lookback window, brightest at the highest-probability
levels and fading out toward thin zones.
Step 2 → Read the clouds. Saturated bands = value / equilibrium where
price tends to stall and mean-revert. Faint gaps = inefficiency
where price moves fast - natural travel targets.
Step 3 → Use the POC. The dashed POC line is the single most-traded
level - a robust magnet and support / resistance anchor. Price
far from POC has a statistical pull back toward it.
Step 4 → Use the Value Area. The dotted Value Area High / Low bracket
the core of the distribution (default 70%). Acceptance inside the
area is balance; rejection outside it is imbalance worth trading.
Step 5 → Check the side profile. The gradient density profile on the
right of the last bar is the same density rotated 90 degrees - a
quick read of the full distribution shape at a glance.
Step 6 → Combine with structure. Clouds are context, not direction.
They pair well with trend, sweep, and breakout tools - a breakout
into a thin zone tends to run; a breakout into a dense zone tends
to stall.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
▸ HOW IT CALCULATES
◆ Gaussian Kernel Density
Every close in the lookback window contributes a gaussian bell curve centred at
its own price. The curves are summed across the price range to produce a single
continuous density function: density(x) = sum over j of exp(-0.5 x ((x - price_j)
/ h)^2). Levels where many bars cluster get tall, overlapping kernels and a high
density; isolated levels get a low density.
◆ Silverman Bandwidth
The kernel width h controls smoothness. It is set automatically by Silverman's
rule of thumb: h = 1.06 x sigma x n^(-1/5), where sigma is the stdev of the
lookback prices and n is the sample size. The Bandwidth Multiplier input scales
this for sharper or smoother clouds. Auto-bandwidth means the same settings
adapt across instruments and timeframes.
◆ Normalisation and POC
The density is evaluated at Resolution levels between the lookback high and low,
then normalised so the peak equals 1.0. That peak level is the POC (Point of
Control) - the single highest-probability price. Cloud opacity and colour are
driven by each level's normalised density.
◆ Value Area
Starting at the POC, the algorithm expands outward, each step absorbing the
denser of the two neighbouring levels, until the enclosed density reaches the
Value Area % of the total (default 70). The price extent reached becomes the
Value Area High and Low.
◆ Gradient Rendering
Each density band of the cloud is drawn as a horizontal box tinted by a
two-colour gradient: the Low Density Color at thin levels through to the High
Density Color at the POC, with opacity ramping in parallel. Adjacent bands tile
continuously, so the cloud reads as a smooth heat-map rather than discrete
blocks. The same gradient drives the right-side density profile, whose width
per level scales with density - at the default resolution the edge reads as a
near-smooth wave while keeping the per-level gradient colour.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
▸ WHAT MAKES IT DIFFERENT
◆ Continuous Density, Not Bins
Standard volume / price profiles split price into discrete bins, so the result
depends heavily on bin size and shows hard edges. KDE produces a smooth
continuous curve - no bin-edge artefacts, no arbitrary bucket count, just the
true shape of where price has traded.
◆ Auto-Adaptive Bandwidth
Silverman's rule sizes the smoothing from the instrument's own volatility and
sample size. The clouds stay meaningful on BTC, EURUSD, gold or an index with
the same default settings.
◆ Value Structure In One View
POC, Value Area High / Low and the full density shape are all on the chart at
once, with a matching side profile - the complete market-profile read without a
separate pane or a session reset.
◆ Premium Gradient Visual
A smooth two-colour density gradient behind the candles with parallel opacity
ramp, a clean dashed POC, dotted value-area lines, and a right-side profile
histogram. The clouds sit behind price as context and never clutter the read.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
▸ DASHBOARD
Real-time panel (top right) with the current value read:
POC - price of the highest-density level
Value Area High - upper bound of the value area
Value Area Low - lower bound of the value area
Price Zone - whether price is Above Value, In Value, or Below Value
Lookback - bars used to build the distribution
Legend table (bottom left) explains every colour. Both panels toggle in the
Dashboard settings.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
▸ SETTINGS
Engine
Lookback Period - 200 (bars used to build the price distribution)
Resolution - 120 (number of horizontal density bands; higher = smoother gradient and profile edge, up to 200)
Bandwidth Multiplier - 1.0 (smoothness; 1.0 = Silverman auto, higher = broader clouds)
Value Area % - 70 (percentage of total density that defines the value area)
Visualization
Low Density Color - blue (thin / inefficiency end of the gradient)
High Density Color - orange (dense / value end of the gradient)
POC Line Color - near-white (high contrast against the dense orange cloud the POC sits in)
Min Cloud Opacity - 8 (opacity of the lowest-density band; keeps empty zones faint)
Max Cloud Opacity - 65 (opacity of the POC band)
Show POC Line - ON
Show Value Area - ON (dotted Value Area High / Low lines)
Value Area Highlight - ON (boosts band opacity inside the value area so the 70% core pops)
Show Side Profile - ON
Profile Outline - ON (thin bright line tracing the right edge of the profile for a crisp silhouette)
Cloud Forward Extend - 10 (bars the clouds extend right of the last bar)
Dashboard
Show Dashboard - ON
Dashboard Position - Top Right
Show Legend - ON
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Best regards,
EXCAVO
Disclaimer
Trading involves significant risk. This indicator is a technical analysis tool
and does not constitute financial advice, investment recommendations, or a
guarantee of future results. Past indicator behavior does not guarantee future
performance. Always use proper risk management and your own judgment.
インジケーター
インジケーター
インジケーター
MGI Walls | Rainbow MatrixGENERAL OVERVIEW
The MGI Walls is a multi-timeframe institutional liquidity radar that extracts and renders the price zones where institutional capital concentrates: Volume Profile blocks (Point of Control, Value Area High, Value Area Low), Anchored VWAPs, and Parabolic SAR levels. Instead of showing these levels for a single chart timeframe, the indicator scans up to five macro timeframes simultaneously and merges overlapping zones into a single intensified block whenever multiple timeframes agree on the same price area.
The main goal of this indicator is to give traders a clean, automatic read on where the structural barriers in the market are — without having to manually flip between timeframes, mark POCs by hand, or guess which level the next reaction will respect. Every line, box, and confluence zone you see on the chart was extracted from real volume distribution data, not drawn manually.
It plots up to four level types per timeframe (POC, VAH, VAL, VWAP, SAR), each weighted by the structural significance of its timeframe — a Weekly POC carries five times the gravitational weight of a 15-minute POC. The Wall Fusion Engine then detects when levels from different timeframes fall within a configurable percentage threshold and consolidates them into a single block. The Nearest Wall HUD panel and the institutional collision alerts complete the toolkit.
This indicator was developed for traders who already understand Volume Profile and VWAP concepts and want to see them across multiple timeframes in a single visual, with automatic confluence detection.
WHAT IS THE THEORY BEHIND THIS INDICATOR?
Most Volume Profile indicators on TradingView — including the standard built-in profiles, Fixed Range Volume Profile, and the various session/visible-range derivatives — share a common architectural choice: they operate on a single timeframe. They show you the POC and Value Area for the current chart only. This treats each timeframe as an isolated decision space.
The problem: institutional flow is not isolated to one timeframe. The market makers operating on the daily horizon see different value areas than those operating on the weekly or 4-hour horizon. Their orders sit at their own POCs and Value Area boundaries. When price approaches a level that only one institutional horizon defends, the reaction is often modest. When price approaches a level that multiple horizons defend simultaneously, the reaction is structurally stronger — that confluence is where the largest pools of resting liquidity accumulate.
This indicator addresses that by performing the extraction across five user-configured timeframes simultaneously via `request.security()`, weighting each level by the gravitational significance of its parent timeframe, and then fusing levels from different timeframes that fall within a configurable margin. The math is standard Volume Profile (POC at the volume-weighted mode, VAH/VAL at the ±2.51σ boundary that approximates the 70% Value Area) — what makes it useful is doing it across five timeframes at once, with hierarchical weighting and confluence merging.
Why traders use it: each block represents an institutional decision zone. A standalone POC line from the 15-minute timeframe is a local reaction point. A POC line that simultaneously aligns with the 4-hour VAH and the daily VWAP is a multi-horizon barrier — a zone defended by three independent pools of institutional capital at once. The fusion engine makes these confluences immediately visible as thicker, more opaque blocks; the polarity of each block reflects the accumulated weight balance of the levels that compose it, not the polarity of the last level to be merged.
The three rendered components — Volume Profile zones, Anchored VWAPs, and Parabolic SAR levels — are not independent layers stacked on the same chart. They map three different aspects of institutional positioning at the same set of timeframes: where past volume concentrated (Volume Profile), where the live volume-weighted consensus price currently sits (VWAPs), and which directional trend regime each timeframe is in (SARs). The Wall Fusion Engine operates across all three layers indiscriminately — a POC from the 4-hour timeframe and a VWAP from the daily timeframe at the same price are fused into a single block, because from the perspective of institutional defense they represent the same structural barrier reinforced by two independent mechanisms. This integration is the reason the three components exist in a single script rather than as three separate indicators: the cross-layer fusion is what surfaces multi-mechanism confluence, which a separate-script approach cannot do.
MGI WALLS FEATURES
The indicator includes 6 main features:
Multi-Timeframe Volume Profile Engine
Anchored MTF VWAPs
Parabolic SAR Levels (MTF)
Wall Fusion Engine with Polarity-Balance Coloring
Nearest Wall HUD Panel
Institutional Collision Alerts
Multilingual interface and full customization across all visual layers.
MULTI-TIMEFRAME VOLUME PROFILE ENGINE
🔹 What It Does
The core of the indicator. For each of the five configured radar timeframes, the engine performs three operations:
◇ Locates the price level that received the highest traded volume in the lookback window — the Point of Control (POC).
◇ Computes the volume-weighted standard deviation of price around that POC.
◇ Builds the Value Area High (VAH) and Value Area Low (VAL) at a calibrated multiplier (±2.51σ) of that deviation, approximating the price range that contained 70% of the total volume.
The result is three institutional reference levels per timeframe — POC, VAH, VAL — extracted natively at the granularity of each timeframe rather than approximated from the current chart's data.
🔹 Method
The extraction runs via `request.security()` with `lookahead=barmerge.lookahead_off` to prevent repainting. The POC is identified as the volume-weighted mode within the lookback window. The Value Area boundaries are derived statistically from the volume-weighted variance of price around the POC, using a calibration factor (vp_k = 2.51) tuned to approximate the conventional 70% Value Area definition. Each level is plotted on the chart as a line or box at its native price location, color-coded by whether it sits above (resistance) or below (support) the current price, and weighted by the timeframe it originated from.
🔹 Hierarchical Weighting
The five timeframes are weighted by structural significance:
◇ TF1 (Micro, default 15m): weight 1 — local reaction point.
◇ TF2 (Intraday, default 1h): weight 1 — session-scale level.
◇ TF3 (Macro 1, default 4h): weight 2 — multi-session level.
◇ TF4 (Macro 2, default Daily): weight 3 — multi-day level.
◇ TF5 (Global, default Weekly): weight 5 — multi-week structural barrier.
The weight controls visual prominence (opacity, border thickness) and, when fusion occurs, the contribution of each level to the polarity balance of the resulting block.
ANCHORED MTF VWAPS
🔹 What It Does
For each of the five radar timeframes, an Anchored VWAP is extracted and rendered as a separate level. The Global VWAP — the average of all five — is also plotted, marked with a globe emoji to distinguish it from the per-timeframe VWAPs.
🔹 Method
The per-timeframe VWAP is computed via a volume-weighted moving average of hlc3 on the native bars of each timeframe, then reported back to the current chart through `request.security()`. The Global VWAP is the unweighted average of the five timeframe VWAPs that are currently available (NA values are skipped).
🔹 Why It Matters
The Volume Profile blocks tell you where past volume concentrated. The VWAPs tell you what the volume-weighted consensus price is for each horizon, updated bar by bar. Together they give a complete read on every bar: where the past institutional reference zones are (the blocks) and where the live volume-weighted average for each horizon currently sits (the VWAPs).
PARABOLIC SAR LEVELS (MTF)
🔹 What It Does
The Parabolic SAR for each of the five radar timeframes is extracted and rendered as an institutional trend-direction anchor. SAR levels are toggleable independently of the Volume Profile and VWAP layers.
🔹 Why It Matters
The SAR provides a directional trend reference per timeframe — when the Weekly SAR sits above price and the Daily SAR sits below, the structure is in conflict and the resolution of that conflict often drives the next swing. When multiple SARs align on the same side, the directional bias is structurally agreed across horizons.
WALL FUSION ENGINE WITH POLARITY-BALANCE COLORING
🔹 What It Does
When two or more levels from different timeframes fall within a configurable percentage threshold (default 0.30%), the engine fuses them into a single block. The fused block inherits the combined weight of all its components — visually thicker, more opaque, more visible than a standalone level. The label of the fused block accumulates the directional triangles of each contributing level (▲ for support, ▼ for resistance).
🔹 Polarity-Balance Coloring
The color of a fused block reflects the accumulated weight balance of its constituent levels — not the polarity of the last level to be merged. A block containing four resistance levels (▼▼▼▼) and two support levels (▲▲) will render red, because the resistance weight dominates. A block where support and resistance weights are equal uses a tiebreaker: the position of the current price relative to the block's midpoint. Price above midpoint resolves to support (green); price below resolves to resistance (red). This produces a coloring scheme that is internally consistent with the triangle labels and with the price's current location.
🔹 Customization
The Wall Merge Margin (%) input controls how aggressively levels are fused. Lower values produce many separate precise lines. Higher values produce massive consolidated institutional blocks. The default of 0.30% is calibrated for liquid instruments on intraday timeframes; for higher-volatility assets or higher timeframes, larger margins (0.50–1.00%) may produce more readable charts.
NEAREST WALL HUD PANEL
🔹 What It Shows
A compact corner panel reports four live values:
◇ RESISTANCE — the price of the nearest wall above the current price
◇ DIST. — the percentage distance from current price to that resistance
◇ SUPPORT — the price of the nearest wall below the current price
◇ DIST. — the percentage distance from current price to that support
The distances are computed against the midpoint of each fused block, so the values reflect the consolidated wall, not any single contributing level.
🔹 Why It Helps
The HUD removes the need to visually measure distances to the walls on every bar. It tells you in plain numerical form how far the nearest barriers are in each direction. Useful for stop placement, target placement, and live decision-making where the visual chart is busy with multiple levels.
🔹 Customization
The HUD can be positioned in any of the four chart corners and rendered in any of five font sizes. The display language is controlled by the System Language input.
snapshot
INSTITUTIONAL COLLISION ALERTS
🔹 What Triggers
Two alert types are available:
◇ VWAP Collision — fires when price crosses or touches the daily, weekly, or monthly VWAP within a 0.15% proximity band.
◇ Volume Profile Wall Hit — fires when price crosses or touches the Global POC, VAH, or VAL within the same proximity band.
🔹 How They Fire
Alerts are gated by `barstate.isconfirmed`, which means they only trigger on the close of the bar that touched the level — not intra-bar. This prevents false signals from wicks that get rejected before the bar closes. Each alert uses `alert.freq_once_per_bar`, ensuring no duplicate firings on the same candle.
🔹 alertcondition() Mode
For users who prefer the TradingView alert UI rather than the `alert()` function call, two `alertcondition` blocks are also exposed: "VWAP Collision" and "Volume Profile Wall Hit". A third dummy `alertcondition` titled "HOW TO SETUP ALERTS (READ)" provides setup guidance in the alert condition menu.
MULTILINGUAL INTERFACE
The indicator supports five languages for the HUD display and alert messages: English (default), Português, Español, Русский, and 中文 (Chinese). Code, comments, and configuration tooltips remain in English regardless of the selected language.
For reference, the English text of all multilingual UI strings used in the HUD and alerts:
◇ (SUPPORT) / (RESISTANCE) — appended to wall labels indicating polarity
◇ RESISTANCE: / SUPPORT: — HUD row labels for nearest walls
◇ DIST.: — HUD row label for distance percentage
◇ VWAP Collision Alert: "🛡️ Price collided with Institutional VWAP. Defense zone active."
◇ Volume Profile Wall Alert: "🧱 Price hit Macro Volume Profile zone (POC/VAH/VAL). Institutional decision imminent."
HOW TO USE
This indicator is not a signal generator. It is a structural map: it tells you where the institutional barriers are, how strong each one is (by weight and fusion), and how far the nearest one is in each direction.
🔹 Reading the Walls
◇ Each line or block on the chart marks an institutional decision zone.
◇ The triangles in the label (▲ or ▼) and their count indicate the polarity and weight of the level.
◇ Walls with multiple triangles in the same direction are stronger reaction points than single-triangle walls.
◇ A block with mixed triangles is a fused confluence — the color shows which side dominates by weight.
🔹 Reading the HUD
◇ The HUD reports the nearest resistance above and nearest support below the current price.
◇ The percentage distances help size stops and targets against the structural barriers rather than against arbitrary fixed values.
🔹 Tactical Reading
◇ Price approaching a heavy multi-triangle wall: zone of elevated structural significance, where multiple institutional horizons coincide.
◇ Price sitting between two close walls of opposite polarity: ranging structure, defined by two opposing barriers of comparable weight.
◇ Price breaking through a heavy wall on confirmed close: structural shift. The wall often inverts polarity on subsequent retests.
◇ VWAP collision alerts: useful as a contextual reference for mean-reversion or trend-continuation analysis.
🔹 Multi-Timeframe Reading
◇ On lower timeframes (1m, 5m, 15m), configure shorter radar timeframes to track intraday institutional flow.
◇ On higher timeframes (1h, 4h, daily), keep the default 15m/1h/4h/D/W configuration to read multi-day and multi-week structural zones.
◇ The Global VWAP and Global POC (marked with 🌎) represent the consensus across all five timeframes — the most structurally significant single reference.
INPUTS EXPLAINED
🔹 System Language
Display language for the HUD and alert messages. Options: English (default), Português, Español, Русский, 中文 (Chinese).
🔹 Radar Timeframes (TF1 to TF5)
Configure each of the five macro periods to scan. Defaults: 15m, 1h, 4h, Daily, Weekly. The shortest timeframe carries weight 1; the longest carries weight 5.
🔹 Show MTF VWAPs (Radar)
Toggle for the Volume-Weighted Average Price extracted from each radar timeframe.
🔹 Show POC Lines
Toggle for the Point of Control lines — the price level with the highest traded volume in each timeframe.
🔹 Show VA Boxes (VAH / VAL)
Toggle for the Value Area High and Value Area Low — the upper and lower boundaries of the 70% volume zone.
🔹 Show SAR Levels
Toggle for the Parabolic SAR levels from each timeframe.
🔹 Fuse Overlapping Walls
Toggle for the confluence merging engine. When enabled, levels from different timeframes that fall within the Wall Merge Margin are consolidated into a single intensified block.
🔹 Wall Merge Margin (%)
Distance threshold to fuse nearby walls. Range 0.01–3.00, default 0.30. Lower values produce separate precise lines; higher values produce consolidated institutional blocks.
🔹 Show Nearest Wall Panel
Toggle for the corner HUD reporting nearest resistance, nearest support, and the percentage distances.
🔹 Panel Position
Position of the HUD on the chart. Four corners available: Top Right (default), Top Left, Bottom Right, Bottom Left.
🔹 Font Size
HUD font size. Options: Tiny, Small (default), Normal, Large, Huge.
🔹 VWAP Collision Alert
Toggle for the alert that fires when price collides with the daily, weekly, or monthly VWAP.
🔹 Volume Profile Wall Alert (POC/VAH/VAL)
Toggle for the alert that fires when price touches the Global POC, VAH, or VAL.
IMPORTANT NOTES
The MGI Walls works on any timeframe. The default radar configuration (15m/1h/4h/D/W) is calibrated for intraday and swing trading on liquid instruments. For position trading or scalping, the radar timeframes can be reconfigured to scan longer or shorter horizons respectively.
The indicator works best on instruments with reliable volume data: crypto perpetual contracts, large-cap equities, futures, major forex pairs. On low-volume instruments, the Volume Profile component becomes less reliable, though the VWAP and SAR components continue to function correctly.
Alerts fire once per confirmed bar. Historical bars never repaint after they close. The live bar updates intra-bar as expected for a real-time indicator.
The Value Area calibration factor (vp_k = 2.51) is tuned to approximate the conventional 70% Value Area definition under volume-weighted standard deviation. It is a calibration constant derived from observation rather than an arbitrary choice.
Pine Script v6. Open-source under Mozilla Public License 2.0.
UNIQUENESS
The MGI Walls is unique in three ways. First, it performs the Volume Profile, VWAP, and SAR extraction across five timeframes simultaneously rather than on the current chart only, surfacing the institutional reference zones that multiple time horizons agree on rather than only those visible on the active timeframe. Second, it weights each level by the structural significance of its parent timeframe — a Weekly POC carries five times the gravitational weight of a 15-minute POC — and the Wall Fusion Engine consolidates levels from different timeframes that fall within a configurable margin into a single intensified block, making multi-horizon confluence zones immediately visible as visually thicker walls. Third, the fused-block coloring reflects the accumulated weight balance of all constituent levels rather than the polarity of the last level to be merged, producing a visual scheme that is internally consistent with the triangle labels (▲ for support, ▼ for resistance) and with the price's current position relative to the block. The combination of multi-timeframe simultaneous extraction, hierarchical weighting with automatic confluence fusion, and balance-driven block coloring produces a structural map that behaves differently from single-timeframe Volume Profile indicators, particularly at price zones where multiple institutional horizons converge and where the strongest reactions tend to occur.
PUBLICATION METADATA (handoff to operator — not part of description)
Title: MGI Walls | Rainbow Matrix
Visibility: Open-source / Public
Category suggestion: Volume-based (primary) — TradingView's category for Volume Profile / volume-driven indicators
Tag suggestions (TV allows up to 10; pick the 9 most relevant):
- volume-profile
- poc
- value-area
- vwap
- multi-timeframe
- mtf
- confluence
- institutional
- support-resistance
- parabolic-sar (optional, swap for one above if SAR is a key selling point)
License declaration: Mozilla Public License 2.0 (already in script header)
Screenshot slots in the description (5 "snapshot" placeholders):
1. After GENERAL OVERVIEW — wide chart showing the indicator running on BTC or major instrument, with walls visible across multiple TFs
2. After Multi-Timeframe Volume Profile Engine section — chart annotated with POC/VAH/VAL lines from different TFs
3. After Wall Fusion Engine section — close-up of a fused confluence block with mixed triangles (▲▼) and the polarity-balance color clearly visible
4. After Nearest Wall HUD Panel section — HUD close-up showing the 5-row layout with real values
5. (Optional, swap into one of the above slots) — Black Swan-style touch event showing a collision alert firing
インジケーター
Reaction Quality Heat Zones [AGPro Series]Reaction Quality Heat Zones
🧠 Core Idea
Is price reacting with clean quality, or is the zone only producing weak noise and failure pressure?
📌 Overview / What it does
Reaction Quality Heat Zones is a premium TradingView overlay that evaluates the quality of price reactions around a live reference zone. It studies wick rejection, close location, participation, follow-through, and failed-reaction pressure to determine whether the current reaction area deserves attention.
The script produces a forward-projected heat zone, centered zone label, compact event labels, right-side state tags, and an AGPro-style panel. It is designed to show whether a reaction is clean, weak, absorbing pressure, failing, or producing follow-through.
It does not predict price direction, automate trading, or provide guaranteed entries. It is a visual context tool for reading reaction quality.
🎯 Purpose & Design Philosophy
This script was built because many traders can see a reaction after it happens, but struggle to judge the quality of that reaction in real time.
Reaction Quality Heat Zones helps traders evaluate whether a level, area, or market response is actually meaningful, or whether price is only producing low-quality movement around noise.
The mindset is quality-first: not every bounce, rejection, or reaction deserves the same weight.
⚡ Why This Script Is Different
Most tools mark support, resistance, or candle reactions as isolated events.
This script does NOT treat every wick or bounce as equally important.
Instead, it evaluates reaction quality as a combined structure: wick quality, close behavior, participation, follow-through, and failure pressure are all interpreted together.
⚙️ Methodology
1. Context Detection
The script identifies the dominant reaction side by comparing bullish and bearish reaction quality.
2. Reference Mapping
It builds a heat zone around the most relevant recent reaction boundary.
3. Reaction Evaluation
It scores the zone using wick rejection, close quality, participation, follow-through, and distance from the reaction boundary.
4. Visual Output
It displays a projected heat zone, event labels, state tags, and a structured panel.
🗺️ How to Read the Chart
Zones represent areas where reaction quality is being evaluated.
The centered zone label shows the active reaction heat score.
Labels mark clean reactions, weak reactions, absorption risk, failed reactions, and follow-through events.
Colors represent state context:
• Green = clean or follow-through reaction
• Pink = failed reaction pressure
• Yellow = absorption risk
• Indigo = weak or building reaction
The panel summarizes reaction state, direction, heat score, failure pressure, wick quality, follow-through, and next context.
🚦 Signals & States
• CLEAN REACTION → reaction quality is strong and failure pressure is controlled
• FOLLOW-THROUGH → reaction quality is strong and continuation is visible
• WEAK REACTION → reaction quality is not strong enough yet
• ABSORPTION RISK → quality exists, but failure pressure is also elevated
• FAILED REACTION → failure pressure dominates the reaction area
• REACTION BUILD → no decisive reaction state is confirmed
🔔 Alerts Logic
Alerts trigger when a new clean reaction, follow-through reaction, failed reaction, absorption risk, or weak reaction is detected.
Alerts are attention markers only. They are not trade instructions.
🧩 Confluence Logic
The strongest reaction context appears when wick rejection, close quality, participation, and follow-through align.
The weakest reaction context appears when reaction quality is low and failure pressure increases.
📊 When to Use
• Support and resistance reactions
• Breakout retests
• Range boundary reactions
• Pullback reaction checks
• Intraday and swing market-structure review
⚠️ When NOT to Use
• Very low-liquidity symbols
• Random chop without clear reaction areas
• News-driven spikes
• Charts where spreads or data quality distort candles
🎛️ Key Inputs
• Reaction Lookback → controls the recent window used to build the heat zone
• Follow-Through Length → controls continuation evaluation after reaction
• Heat Threshold → defines how strong a reaction must be to qualify
• Failure Threshold → defines when failure pressure becomes important
• Zone Projection Bars → keeps all zone edges visible for publication screenshots
• Panel and label settings → control readability and layout
🖥️ Interface & Visual Design
The interface is built for fast visual interpretation.
The heat zone carries the main story, while the panel provides structured confirmation. Right-side tags keep the current state readable without burying the candles.
The visual design is intentionally premium, compact, and publication-ready.
🧪 Practical Usage Workflow
1. Read the panel state.
2. Check the active heat zone.
3. Compare heat score with failure pressure.
4. Look for clean reaction or follow-through confirmation.
5. Interpret the result within broader market structure.
🔍 Interpretation Guidelines
High heat with controlled failure pressure suggests a cleaner reaction.
High heat with high failure pressure suggests absorption risk.
Low heat suggests the reaction may not be meaningful yet.
Failed reaction pressure does not guarantee reversal. It shows that the reaction area is losing quality.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an automated trading system.
It does not provide guaranteed buy or sell signals.
It does not replace risk management.
⚠️ Limitations & Transparency
Reaction quality can change quickly.
Different timeframes may show different reaction behavior.
Volatility, liquidity, market sessions, and sudden news can affect how zones behave.
Outputs should always be interpreted with broader market context.
🧠 Market Context Notes
A good reaction is not only a wick.
It also needs close quality, participation, and follow-through. This script is designed to make that difference visible.
🧾 Use Case Examples
When price reacts from a zone with strong wick quality, strong close behavior, and follow-through, the heat score can confirm a cleaner reaction.
When price reacts but failure pressure rises, the zone may be vulnerable.
When price stays inside the zone without quality, the script may show weak reaction or reaction build context.
🧱 System Philosophy
AGPro Series scripts are designed to make complex market context easier to read without reducing the market to simplistic signals.
This script follows that philosophy by focusing on reaction quality instead of generic support or resistance marks.
🔐 Non-Promise Statement
No script can guarantee future price movement.
This tool provides structured context, not certainty.
📉 Risk Disclosure
Trading involves risk.
Users remain responsible for their own decisions, position sizing, and risk management.
This script does not provide financial advice or guaranteed trading outcomes.
📚 Educational Note
Use this script to study how price reacts around important areas and to compare clean reactions with weak or failed reactions across different market conditions.
インジケーター
Acceptance Failure Path Map [AGPro Series]Acceptance Failure Path Map
🧠 Core Idea
Did price truly accept beyond a market boundary, or did that acceptance fail and create a new reaction path?
📌 Overview / What it does
Acceptance Failure Path Map is a market-structure visualization tool designed to study acceptance, failed acceptance, reclaim attempts, and continuation behavior around a defined reference range.
The script maps an acceptance band, detects whether price holds above or below that band, and highlights when accepted price fails back through the boundary. It produces compact labels, a centered path zone, right-side state tags, and an AG Pro panel that summarizes the current acceptance context.
It does not predict price direction, automate decisions, or claim that any acceptance event must continue. Its purpose is to make acceptance quality easier to read.
🎯 Purpose & Design Philosophy
This script was built for traders who want to understand whether a move is being accepted by the market or rejected after a temporary push beyond structure.
Many breakout tools mark only the breakout event. This script focuses on what happens after the breakout: acceptance, failure, reclaim pressure, and continuation risk.
The design supports a patient, context-first workflow where the trader reads the path of price around a boundary instead of reacting to a single candle.
⚡ Why This Script Is Different
Most tools focus on breakout signals, support and resistance touches, or simple range breaks.
This script does NOT treat every break as meaningful acceptance.
Instead, it builds a path map around acceptance quality, failure timing, reclaim behavior, and current risk state. The result is a cleaner view of whether price is holding acceptance or losing it.
⚙️ Methodology
1. Context Detection
The script builds a reference range from recent market structure and applies an ATR-based buffer to reduce noise.
2. Reference Mapping
It defines upper and lower acceptance boundaries and tracks whether price closes beyond them for the required number of bars.
3. Reaction Evaluation
After acceptance appears, the script monitors whether price fails back through the boundary, attempts reclaim, or holds continuation.
4. Visual Output
The chart displays an acceptance path zone, event labels, right-side state tags, and a panel summarizing the current condition.
🗺️ How to Read the Chart
Zones show the current acceptance path area around the active boundary.
Labels highlight acceptance above, acceptance below, acceptance failure, reclaim tests, and held acceptance.
Colors separate bullish acceptance, bearish acceptance, neutral failure risk, and reclaim context.
The panel shows the current path state, acceptance side, failure risk, path quality, reference range, active boundary, and next context.
🚦 Signals & States
• ACCEPT ABOVE → Price has accepted above the reference boundary.
• ACCEPT BELOW → Price has accepted below the reference boundary.
• ACCEPT FAIL → Accepted price failed back through the boundary within the failure window.
• RECLAIM TEST → Price is testing reclaim after a failed acceptance event.
• ACCEPT HELD → Acceptance remained valid after the failure window.
🔔 Alerts Logic
Alerts trigger when the script detects acceptance above, acceptance below, acceptance failure, or reclaim testing.
These alerts are attention markers. They are not trade instructions, entry signals, or guaranteed outcomes.
🧩 Confluence Logic
The context becomes stronger when acceptance quality, distance from the reference range, participation, and follow-through direction align.
If acceptance appears without follow-through or quickly returns through the boundary, the failure context becomes more important.
📊 When to Use
• After range breaks
• Around support and resistance transitions
• During breakout retests
• When price is attempting to hold above or below a major boundary
• When evaluating whether market structure is accepted or rejected
⚠️ When NOT to Use
• Extremely illiquid markets
• Very noisy low-timeframe candles
• News-driven spikes with unstable spreads
• Markets with no meaningful reference range
• Situations where a single indicator is being used without broader context
🎛️ Key Inputs
• Reference Range Length → controls how much structure is used to build the acceptance boundary.
• Acceptance Bars → controls how many closes are required before acceptance is recognized.
• Failure Window → controls how quickly accepted price must fail back through the boundary.
• Boundary Buffer ATR → adjusts the buffer around the reference range.
• Label and Panel Font Size → adjust chart readability.
• Visible Band Bars and Band Projection Bars → control how the acceptance zone appears on the chart.
🖥️ Interface & Visual Design
The interface is designed for a premium, clean chart view.
The panel provides the current summary. The acceptance zone carries the main story. Labels are compact and spaced to avoid hiding candles.
The visual hierarchy is intentionally simple: zone first, current state second, event labels third.
🧪 Practical Usage Workflow
1. Read the AG Pro panel to identify the current path state.
2. Check whether price is above, below, or inside the acceptance path zone.
3. Review recent labels to understand whether acceptance held, failed, or reclaimed.
4. Compare the current failure risk and path quality with broader market context.
5. Use alerts only as attention markers for further review.
🔍 Interpretation Guidelines
Acceptance is stronger when price remains outside the boundary with follow-through.
Acceptance failure is more meaningful when price quickly returns through the boundary after appearing accepted.
Reclaim tests should be interpreted as context changes, not automatic reversal signals.
Held acceptance suggests the market is continuing to respect the accepted side, but it still requires confirmation from broader structure.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an automated trading system.
It does not provide guaranteed buy or sell signals.
It does not replace risk management, market context, or independent analysis.
⚠️ Limitations & Transparency
Acceptance behavior can look different across timeframes.
High volatility can create temporary false readings.
Low-liquidity markets may produce unstable boundary behavior.
The script is rule-based and depends on the selected settings, symbol behavior, and chart timeframe.
🧠 Market Context Notes
Acceptance and failure are closely related to market structure, liquidity reaction, and participant commitment.
When price breaks a boundary but cannot hold it, the failed side may become the more important context.
When price accepts and holds, the market may be showing stronger directional commitment.
🧾 Use Case Examples
When price accepts above a range and holds beyond the failure window, the chart may show an ACCEPT HELD context.
When price accepts above a boundary but quickly closes back below it, the script may mark ACCEPT FAIL.
When price returns back toward a failed boundary, the script may show a RECLAIM TEST state.
🧱 System Philosophy
AGPro Series tools are built to visualize market context without turning analysis into prediction.
The goal is to make structure, risk, and reaction quality easier to observe in real time.
🔐 Non-Promise Statement
No script can guarantee market direction, timing, or outcome.
This tool provides structured visual context only.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own decisions, risk management, and position sizing.
This script does not provide financial advice or guaranteed trading results.
📚 Educational Note
Use this script as a learning and analysis tool for studying acceptance, failed acceptance, reclaim pressure, and continuation behavior around market boundaries.
インジケーター
Range Control Transfer Map [AGPro Series]Range Control Transfer Map
🧠 Core Idea
Who controls the range now, and did control transfer from the buyer side to the seller side or from the seller side to the buyer side?
📌 Overview / What it does
Range Control Transfer Map is a range-control visualization tool built to study sideways markets where price rotates between upper and lower boundaries.
The script builds a mature range, separates it into buyer-control and seller-control zones, maps the internal control transfer band, tracks acceptance through that band, scores transfer quality, monitors failed-transfer risk, and summarizes the current control state in a compact AG Pro panel.
It does not predict future price, automate trades, or claim that a control-transfer event must continue. It is a structured decision-support map for reading range control, acceptance, failed transfer risk, and next-context conditions.
🎯 Purpose & Design Philosophy
Many range tools answer only one question:
Where are support and resistance?
This script was built to answer a more useful question:
Who controls the range now?
The design goal is to help traders separate passive sideways movement from meaningful control transfer inside a mature range.
⚡ Why This Script Is Different
Most range tools draw a box, mark the high, mark the low, and stop there.
This script does NOT treat every range touch as equally important.
Instead, it divides the range into buyer-control and seller-control halves, watches the midpoint transfer band, checks candle body commitment, reviews volume participation, evaluates range health, and tracks whether the active control side is still protected or starting to fail.
The focus is not only where the range is.
The focus is who is gaining or losing control inside it.
⚙️ Methodology
1. Range Detection
The script identifies a working range using recent high/low structure, ATR-normalized range height, and repeated edge interaction.
2. Range Health Scoring
Range Health combines range height balance, edge-touch behavior, and current position relative to the control line.
3. Control Zone Mapping
The upper half becomes the Seller Control Zone.
The lower half becomes the Buyer Control Zone.
The midpoint area becomes the Control Transfer Band.
4. Transfer Evaluation
When price accepts through the transfer band with enough candle body commitment, the script evaluates whether buyer or seller control has transferred.
5. Transfer Quality Scoring
Transfer Quality combines range health, candle body commitment, and volume participation into a 0-100 score.
6. Failure Risk Review
The script monitors whether the active transfer is losing the transfer band and moving back toward control reset.
7. Visual Output
The chart displays buyer/seller control zones, the control transfer band, active transfer labels, failed-transfer labels, right-side control tags, alerts, and a compact AG Pro panel.
🗺️ How to Read the Chart
Seller Control Zone = the upper half of the mature range where seller-side control is evaluated.
Buyer Control Zone = the lower half of the mature range where buyer-side control is evaluated.
Control Transfer Band = the internal midpoint band where control handoff is judged.
SELLER CONTROL = price has accepted through the transfer band in favor of the seller side.
BUYER CONTROL = price has accepted through the transfer band in favor of the buyer side.
BALANCE = the range is mature, but neither side has clean active control.
RANGE BUILDING = the current structure is not mature enough for control-transfer mapping.
Panel = summarizes control side, transfer quality, range health, failure risk, control zone, and next context.
🚦 Signals & States
• CONTROL TRANSFER UP → buyer-side control transfer detected.
• CONTROL TRANSFER DOWN → seller-side control transfer detected.
• FAILED BUYER CONTROL → buyer-side transfer failed back through the control band.
• FAILED SELLER CONTROL → seller-side transfer failed back through the control band.
• BUYER EDGE CONTROL → price reacts from the lower control side.
• SELLER EDGE CONTROL → price reacts from the upper control side.
• BALANCE → no clean control transfer is active.
• RANGE BUILDING → the structure is not mature enough yet.
🔔 Alerts Logic
Alerts trigger when a major range-control event appears.
• Buyer Control Transfer → buyer-side transfer detected.
• Seller Control Transfer → seller-side transfer detected.
• High-Quality Control Transfer → transfer quality reaches the required threshold.
• Failed Control Transfer → active control transfer loses the control band.
• Buyer Edge Control → optional alert for lower-edge control reaction.
• Seller Edge Control → optional alert for upper-edge control reaction.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The context becomes stronger when:
• The range has enough ATR-normalized height
• The range has repeated edge interaction
• Price accepts through the transfer band
• Candle body commitment supports the transfer direction
• Volume participation is not weak
• Transfer Quality is above the required threshold
• Failure Risk remains low after the transfer
• The panel state agrees with the chart label
When these elements do not align, the script avoids treating every range movement as a meaningful control shift.
📊 When to Use
• Range-control review
• Sideways market analysis
• Buyer/seller control mapping
• Failed transfer review
• Range acceptance study
• Crypto, stocks, futures, forex, and liquid markets
• 15m, 30m, 1H, 4H, and 1D charts
⚠️ When NOT to Use
• Very low-liquidity assets
• Extremely noisy micro timeframes
• Strong news spikes that distort range structure
• Clean one-directional trend environments with no mature range
• Markets where every midpoint cross is being over-interpreted
• Situations where a single label is expected to act as a guaranteed signal
🎛️ Key Inputs
• Range Lookback → defines the recent structure window used for range high, range low, and control line.
• Minimum Range Height ATR → defines the minimum range height required for a meaningful control map.
• Maximum Range Height ATR → prevents very wide structures from being treated as clean range-control maps.
• Use Intraday Adaptive Range → allows intraday charts to keep useful control maps without making higher-timeframe charts too noisy.
• Edge Touch Tolerance ATR → controls how close price must come to a range edge to count as an edge interaction.
• Control Band ATR → controls the thickness of the internal transfer band.
• Minimum Transfer Score → defines the quality threshold for meaningful control transfer.
• Minimum Body / Range → controls how much candle body commitment is required.
• Volume Confirm Ratio → defines how much participation is required for full volume credit.
• Failure Buffer ATR → controls where an active transfer starts to fail.
• Maximum Transfer Age → defines how long an active transfer can remain under review.
🖥️ Interface & Visual Design
The visual hierarchy is built around the active range:
The full range box defines the structure.
The upper half shows seller-control territory.
The lower half shows buyer-control territory.
The transfer band marks the internal handoff area.
Event labels mark control transfer and failed-control states.
Right-side tags keep buyer control, seller control, and transfer references visible.
The AG Pro panel compresses the current range-control context into a fast, readable summary.
🧪 Practical Usage Workflow
1. Read the panel Control Side.
2. Check whether the chart is Range Building, Balance, Buyer Control, or Seller Control.
3. Review where price is relative to the Control Transfer Band.
4. If a transfer label appears, compare it with Transfer Quality.
5. Watch whether Failure Risk remains low or starts rising.
6. Use the buyer and seller control zones as context areas, not automatic trade levels.
7. Confirm with broader market structure, liquidity, volume, and risk planning.
🔍 Interpretation Guidelines
A buyer-control transfer does not guarantee upside continuation.
A seller-control transfer does not guarantee downside continuation.
A failed-transfer label means the active control idea weakened.
A range-building state means the structure is not mature enough yet.
The script is best used as a range-control context layer, not as a standalone trading system.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an auto-trading system.
It does not provide guaranteed entry or exit signals.
It is not a simple support/resistance box.
It is not another generic range breakout indicator.
⚠️ Limitations & Transparency
Range quality depends on timeframe and market structure.
Very volatile markets can expand beyond a clean control map.
Low-liquidity symbols may create unreliable edge and transfer behavior.
Choppy markets can create repeated control-transfer attempts.
Volume behavior can differ across crypto, stocks, futures, and forex.
🧠 Market Context Notes
Ranges often move through recognizable control phases:
range building → balance → control transfer → defense → failure or continuation.
This script visualizes that sequence so users can avoid treating every support or resistance touch as equally meaningful.
🧾 Use Case Examples
If price accepts through the transfer band from the lower half, the script may mark CONTROL TRANSFER UP.
If price accepts through the transfer band from the upper half, the script may mark CONTROL TRANSFER DOWN.
If an active buyer-control transfer loses the band, the script may mark FAILED BUYER CONTROL.
If an active seller-control transfer loses the band, the script may mark FAILED SELLER CONTROL.
🧱 System Philosophy
The goal is not to predict the next breakout.
The goal is to understand control inside the range.
This script treats range behavior as a sequence:
structure → control zone → transfer band → acceptance → defense or failure.
🔐 Non-Promise Statement
No control-transfer label guarantees continuation.
No failed-transfer label guarantees reversal.
No range zone guarantees support or resistance.
All outputs should be interpreted as analytical context.
📉 Risk Disclosure
Trading involves risk.
This script is for educational and analytical purposes only.
It does not provide financial advice, investment advice, or guaranteed trading outcomes.
Users are fully responsible for their own decisions, risk management, and trade execution.
📚 Educational Note
Use the script to study how control shifts inside mature ranges.
The most useful question is not only where the range high and low are.
The better question is whether control has actually transferred inside the range.
インジケーター
Breakout Participation Gate [AGPro Series]Breakout Participation Gate
🧠 Core Idea
Does the breakout have enough participation and structure to deserve attention?
📌 Overview / What it does
Breakout Participation Gate is a breakout validation tool built to separate structured breakouts from weak breaks and fakeout-prone moves.
The script builds upper and lower breakout gate levels from recent structure, evaluates breakout candle quality, checks relative volume, body commitment, close location, trend context, retest behavior, expansion potential, and fakeout risk.
It does not predict price direction, automate trades, or claim that a gate-open event must continue. It is a structured visualization and decision-support tool for breakout participation review.
🎯 Purpose & Design Philosophy
Breakouts are among the most searched and most misunderstood market events.
Many tools mark every move above resistance or below support.
This script was built to ask a stricter question:
Did the breakout pass the participation gate?
The design goal is to help traders avoid treating every structural break as equally meaningful.
⚡ Why This Script Is Different
Most breakout tools focus on the break itself.
This script does NOT mark every breakout as valid.
Instead, it checks whether the breakout had enough relative volume, body commitment, close location, range expansion, trend context, and retest behavior. It also keeps the active gate visible so users can watch whether the breakout holds, expands, or fails back inside the structure.
⚙️ Methodology
1. Context Detection
The script identifies recent upper and lower gate levels using a structure lookback.
2. Breakout Qualification
When price closes beyond a gate, the script scores participation through volume, candle body, close location, range expansion, and trend context.
3. Gate Classification
High-quality breakouts can become GATE OPEN events. Lower-quality breaks can be classified as WEAK BREAK.
4. Retest Evaluation
After a gate opens, the script projects a retest shelf and watches whether price defends the shelf.
5. Fakeout and Expansion Review
The script tracks whether price closes back inside the gate shelf or expands beyond the active gate with acceptable participation.
6. Visual Output
The chart displays breakout gate lines, retest shelf, event labels, right-side tags, alerts, and a compact AG Pro panel.
🗺️ How to Read the Chart
Upper Gate = recent upper structure level that price must break to start an upside gate evaluation.
Lower Gate = recent lower structure level that price must break to start a downside gate evaluation.
Breakout Retest Shelf = the active zone around the gate where retest behavior is evaluated.
GATE OPEN = breakout passed the participation gate.
WEAK BREAK = price broke the gate but participation quality was not strong enough.
RETEST HOLD = price defended the active retest shelf after the breakout.
FAKEOUT RISK = price closed back inside the gate shelf after the breakout.
EXPANSION READY = price expanded beyond the gate while participation remained acceptable.
Panel = summarizes gate status, quality score, direction, relative volume, body commitment, retest health, fakeout risk, and next context.
🚦 Signals & States
• GATE OPEN → breakout passed the participation gate.
• WEAK BREAK → price broke structure but did not show enough participation quality.
• GATE WATCH → active gate is being monitored after a breakout.
• RETEST HOLD → active retest shelf was defended.
• FAKEOUT RISK → price closed back through the gate shelf.
• EXPANSION READY → price expanded beyond the gate with acceptable participation.
• WAIT BREAKOUT → no active gate has been triggered.
🔔 Alerts Logic
Alerts trigger when a major breakout-gate state appears.
• Breakout Gate Open → breakout passed the participation gate.
• Weak Breakout → price broke a gate level without enough participation quality.
• Breakout Retest Hold → active retest shelf was defended.
• Breakout Fakeout Risk → price closed back inside the gate shelf after the breakout.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The context becomes stronger when:
• Price closes beyond a defined structure gate
• Relative volume is above normal
• Candle body commitment is strong
• Close location supports the breakout direction
• Range expands versus ATR
• The breakout direction agrees with trend context
• Retest behavior respects the active gate shelf
When these elements do not align, the script avoids treating the breakout as automatically valid.
📊 When to Use
• Breakout validation
• Failed breakout review
• Retest planning
• Trend continuation review
• Crypto, stocks, futures, forex, and liquid markets
• 15m, 30m, 1H, 4H, and 1D charts
⚠️ When NOT to Use
• Very low-liquidity assets
• Extremely noisy micro timeframes
• Symbols with unreliable volume
• News-driven spikes where structure can be distorted
• Markets where every wick break is being over-interpreted
• Situations where a single breakout label is expected to act as a guaranteed signal
🎛️ Key Inputs
• Gate Structure Lookback → defines the recent structure window used for upper and lower gates.
• Breakout Close Buffer ATR → controls how far beyond the gate price must close.
• Minimum Breakout Relative Volume → defines how much participation is required for strong volume credit.
• Minimum Body Commitment % → controls how much candle body participation is required.
• Gate Quality Threshold → separates gate-open breakouts from weak breaks.
• Retest Evaluation Window → defines how long the active gate shelf remains under review.
• Retest Shelf Width ATR → controls the thickness of the retest shelf around the active gate.
• Expansion Ready Distance ATR → defines when a breakout has expanded far enough to be monitored as continuation-ready.
• Event Label Mode → Premium focuses on higher-quality gate states. Detailed allows more weak-break labels.
🖥️ Interface & Visual Design
The visual hierarchy is built around the gate:
Gate lines define the structure.
The retest shelf shows where the breakout should hold.
Event labels mark gate-open, weak-break, retest-hold, fakeout-risk, and expansion-ready states.
Right-side tags keep the active gate context visible.
The AG Pro panel compresses the current breakout context into a fast, readable summary.
🧪 Practical Usage Workflow
1. Read the panel gate status.
2. Check whether price has broken the upper or lower gate.
3. Compare quality score with the event label.
4. Watch the active retest shelf.
5. Check whether price holds, expands, or fails back inside the gate.
6. Confirm with broader market structure, liquidity, volume, and risk planning.
🔍 Interpretation Guidelines
A gate-open label does not guarantee continuation.
A weak-break label does not guarantee reversal.
A retest-hold label means the active shelf was defended according to the script's rules.
A fakeout-risk label means the breakout structure weakened.
The script is best used as a breakout-quality layer, not as a standalone trading system.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an auto-trading system.
It does not provide guaranteed entry or exit signals.
It is not a simple support/resistance breakout marker.
⚠️ Limitations & Transparency
Breakout quality depends on market structure and liquidity.
Volume behavior can differ across crypto, futures, stocks, and forex.
Choppy ranges can create repeated weak-break and fakeout states.
Different timeframes may show different gate behavior.
Highly volatile news events can distort breakout quality.
🧠 Market Context Notes
Breakouts are strongest when structure, candle commitment, participation, and retest behavior align.
The first break is only one part of the story.
The active gate shelf helps users watch whether the market accepts the breakout after the first impulse.
🧾 Use Case Examples
If price closes above the upper gate with strong participation, the script may mark GATE OPEN.
If price breaks a gate but quality is weak, the script may mark WEAK BREAK.
If price returns to the active shelf and defends it, the script may mark RETEST HOLD.
If price closes back through the shelf, the script may mark FAKEOUT RISK.
🧱 System Philosophy
The goal is not to chase every breakout.
The goal is to filter breakout attention.
This script treats breakout quality as a sequence:
structure break → participation gate → retest shelf → expansion or failure.
🔐 Non-Promise Statement
No breakout label guarantees continuation.
No weak-break label guarantees reversal.
No retest label guarantees a successful trend move.
All outputs should be interpreted as analytical context.
📉 Risk Disclosure
Trading involves risk.
This script is for educational and analytical purposes only.
It does not provide financial advice, investment advice, or guaranteed trading outcomes.
Users are fully responsible for their own decisions, risk management, and trade execution.
📚 Educational Note
Use the script to study which breakouts attract real participation and which breaks fail to hold their gate.
The most useful question is not only whether price broke structure.
The better question is whether the breakout deserved attention after the break.
インジケーター
Body Close Break Planner [AGPro Series]TITLE
Body Close Break Planner
🧠 Core Idea
Did price break structure with real body-close acceptance, or was the move only a wick event with weak commitment?
📌 Overview / What it does
Body Close Break Planner is built to evaluate whether a structure break is being accepted with real candle-body commitment. Instead of reacting to every wick beyond a prior high or low, the script focuses on closes that actually establish acceptance beyond the rail.
The script maps the body break rail, an acceptance pocket, a retest shelf, a failure rail, and a first target-room reference. It also adds event labels, right-side tags, and a compact AG Pro panel that summarizes the quality of the active break with a 0-100 Body Break Score.
This script does not predict trend continuation, automate entries, or treat every breakout as valid. It is a rule-based analytical and visualization tool that helps users separate real body-close structure acceptance from weaker noise-driven break attempts.
🎯 Purpose & Design Philosophy
This script was built to solve a very common structural problem: many breakout candles look convincing in the moment, but the move fails because the market never achieved real closing acceptance beyond the level.
The tool was designed for traders who want to evaluate whether a break has genuine body-based commitment, whether the first retest is constructive, and where the structure fails if acceptance is lost.
The mindset behind the script is selective, disciplined, and evidence-based. It supports traders who want to read acceptance quality rather than react to every temporary excursion beyond a level.
⚡ Why This Script Is Different
Most breakout tools focus on level crossing, wick penetration, or generic break-and-retest behavior.
This script does NOT treat every breach of structure as a meaningful breakout.
Instead, it asks whether the move closed through structure with enough body commitment, whether price is still being accepted beyond the rail, whether the retest shelf improves the setup, and whether the move still has room before it becomes extended or fails.
⚙️ Methodology
1. Context Detection
The script maps recent structure highs and lows, then checks whether price closes beyond them with enough candle-body commitment and range expansion.
2. Reference Mapping
Once a valid body-close break is confirmed, the script locks the broken rail, builds an acceptance pocket, marks a retest shelf, and defines a failure line plus a first target-room reference.
3. Reaction Evaluation
Price is then reviewed against the body-break rail and the retest shelf. The script checks whether the move is still accepted, whether the retest improves the structure, or whether the breakout falls back through the failure boundary.
4. Visual Output
The final output includes the acceptance pocket, body-break rail, retest shelf, failure rail, room line, event labels, right-side tags, and dashboard panel.
🗺️ How to Read the Chart
Zones:
The acceptance pocket represents the active post-break area where structure acceptance is being judged.
Labels:
Labels identify new bullish or bearish body-close breaks, accepted structure, retest-ready behavior, target review, and failed breaks.
Colors:
Teal represents stronger constructive break behavior.
Pink represents bearish or failed context.
Gold represents review areas such as target-room interaction.
Indigo represents the main body-break rail.
Panel:
The panel summarizes the active break type, the Body Break Score, current acceptance quality, available room, and the current action state.
🚦 Signals & States
• Bull Break → A bullish body-close structure break has been detected.
• Bear Break → A bearish body-close structure break has been detected.
• Body Accepted → Price is still being accepted beyond the broken structure rail.
• Retest Ready → Price interacted with the retest shelf constructively and the setup quality improved.
• Target Review → The first projected room reference has been reached and context should be reassessed.
• Failed → Price moved back through the failure boundary and the break is no longer structurally clean.
• Wait Break → No valid active body-close break exists.
• Expired → The break is too old to remain active within the current framework.
🔔 Alerts Logic
Alerts can trigger when a new bullish or bearish body-close break is detected, when structure remains accepted, when a retest shelf strengthens the setup, when target room is reached, or when the break fails.
Alerts are attention markers only. They highlight structural events inside the script logic. They are not trade instructions, automated entries, or guarantees of follow-through.
🧩 Confluence Logic
The context becomes stronger when multiple conditions align together.
For example, a structure break with a strong body ratio, clean range expansion, stable hold beyond the break rail, and a constructive retest shelf interaction is much stronger than a shallow close that immediately falls back into the old range.
When body commitment, breakout range, retest quality, and available room align together, the context becomes structurally more reliable.
📊 When to Use
• Breakout or breakdown environments where close quality matters
• Markets with clean price structure and readable swing levels
• Crypto, forex, indices, and liquid stocks
• 1H, 4H, and 1D chart review
• Situations where wick-only breaks create repeated false positives
⚠️ When NOT to Use
• Illiquid markets with distorted price prints
• Extremely noisy sessions with poor candle quality
• Very low-range environments where closes carry little structural information
• Symbols dominated by gaps or erratic price jumps
• Conditions where the market repeatedly overshoots levels without clean follow-through
🎛️ Key Inputs
• Structure Lookback → Controls how recent highs and lows are mapped
• Minimum Range Ratio → Controls how much expansion is required before a break qualifies
• Minimum Body / Range → Filters out weak closes and wick-dominant candles
• Close Buffer ATR → Controls how far beyond structure the close must finish
• Acceptance Pocket ATR → Controls the depth of the post-break pocket
• Retest Shelf Buffer → Controls how shelf interactions are interpreted
• Failure Buffer ATR → Controls where the active break becomes invalid
• Visual Settings → Control labels, panel location, theme, font size, and optional chart styling
🖥️ Interface & Visual Design
The interface is designed to answer one question quickly: is this break actually being accepted?
The panel creates a clean information hierarchy so the user can understand break state, score, room, and current action without reading every chart element manually. The chart layer keeps the acceptance pocket, body-break rail, failure line, and room reference readable without overwhelming candles.
The visual intent is professional, premium, and publication-friendly rather than decorative.
🧪 Practical Usage Workflow
1. Read the panel to confirm whether a valid body-close break is active
2. Check the body-break rail and acceptance pocket
3. Evaluate whether price is simply holding or whether the retest shelf improved the structure
4. Review room to the target reference and distance to failure
5. Use labels and tags as context markers, not as direct commands
🔍 Interpretation Guidelines
A stronger score suggests better body commitment, healthier range expansion, and more reliable post-break structure.
A Body Accepted state means price is still holding beyond the broken rail, but it does not automatically mean the move is early or low-risk.
A Retest Ready state suggests the market pulled back in a controlled way and defended the structure more convincingly.
A Target Review state suggests that the first projected room objective has already been reached and the context should be reassessed rather than assumed to continue indefinitely.
🚫 What This Script Is NOT
This script is not a prediction engine.
This script is not financial advice.
This script is not an automated trading system.
This script does not place orders.
This script does not guarantee continuation, retest success, target reach, or profitability.
⚠️ Limitations & Transparency
This script is rule-based and depends on the quality of the underlying market structure.
Different timeframes can produce very different break quality profiles. In high-volatility or low-liquidity conditions, candle closes may appear meaningful while still failing quickly. In some markets, wick behavior may remain important even when the body-close break model is intentionally strict.
Outputs should always be interpreted within broader market context rather than in isolation.
🧠 Market Context Notes
Body-close acceptance often matters most around obvious swing highs, swing lows, range edges, and post-compression expansion points.
A wick beyond structure can attract attention, but a true close beyond structure often tells a more reliable story about commitment. Even so, not every accepted break becomes a trend. Some become retest traps, and some run directly into higher-timeframe resistance or support.
🧾 Use Case Examples
Example 1:
Price closes above a well-defined swing high with a strong body and good expansion. The script marks a bull break, builds the acceptance pocket, and later upgrades the context when the retest shelf holds.
Example 2:
Price breaks below a swing low with body commitment, but then quickly closes back through the failure boundary. The script marks the break as failed, signaling that the downside acceptance did not hold.
Example 3:
A strong body-close break remains accepted and quickly reaches the first target-room line. The script marks target review, reminding the user to reassess efficiency and extension.
🧱 System Philosophy
AGPro Series tools are built as decision-support frameworks, not generic signal generators.
The philosophy here is to reward quality over noise: stronger closes, cleaner acceptance, clearer structure, and more readable post-break behavior.
🔐 Non-Promise Statement
This script does not promise certainty.
It does not promise that a body-close break will continue, hold, retest cleanly, or reach its projected room. It only organizes the structure so the user can evaluate the break with more discipline and clarity.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly, and any analytical tool can become less reliable under shifting volatility, liquidity, or structural conditions. Users remain fully responsible for their own decisions, execution, and risk management.
This script is for educational and analytical purposes only. It does not provide financial advice.
📚 Educational Note
This tool is most effective when combined with broader market structure, liquidity awareness, and disciplined trade management.
It is designed to improve interpretation quality, not to replace critical thinking.
インジケーター
Range Equilibrium Rotation Planner [AGPro Series]Range Equilibrium Rotation Planner
🧠 Core Idea
Is price rotating cleanly away from range equilibrium toward an edge, or is the midpoint still controlling the auction?
📌 Overview / What it does
Range Equilibrium Rotation Planner maps mature range structure and focuses on the midpoint equilibrium area instead of treating every range as a breakout setup.
The script displays the active range box, equilibrium band, edge rails, rotation room rail, failure rail, event labels, right-side tags, optional bar coloring, and a compact AG Pro dashboard with a 0-100 Rotation Score.
It does not predict range breaks. It helps organize range balance, midpoint control, directional rotation, edge room, failure risk, and next-action state.
🎯 Purpose & Design Philosophy
Many range tools focus on support, resistance, or breakout alerts.
This script was built for a different question: what happens inside the range before price reaches the edge?
It helps traders review whether price is still trapped around equilibrium or beginning a clean rotation from the midpoint toward the upper or lower edge.
⚡ Why This Script Is Different
Most range indicators draw a box and wait for a breakout.
This script does NOT center the workflow on range escape.
Instead, it evaluates range maturity, midpoint control, rotation quality, edge room, and failure back through equilibrium. The goal is rotation planning, not breakout prediction.
⚙️ Methodology
1. Range Maturity Detection
The script builds a rolling range using recent high and low structure, then checks whether the height and edge interactions are meaningful.
2. Equilibrium Mapping
The midpoint band is calculated around the center of the range and becomes the key control zone.
3. Rotation Evaluation
Price must move away from equilibrium with enough buffer before directional rotation is considered active.
4. Risk / Room Structure
The active edge becomes the room reference, while the opposite side of equilibrium becomes the failure area.
5. Visual Output
The chart receives a range box, equilibrium band, edge rails, room rail, failure rail, labels, right-side tags, optional bar coloring, and dashboard panel.
🗺️ How to Read the Chart
The range box marks the current high-to-low structure.
The equilibrium band shows the midpoint area where rotation control is evaluated.
The upper and lower rails mark the active range edges.
The room rail marks the edge being targeted by the active rotation.
The failure rail marks where rotation has moved back through the wrong side of equilibrium.
Labels highlight mature ranges, rotations from midpoint, equilibrium holds, edge reviews, and failed rotations.
Colors represent context:
• Teal → bullish rotation
• Pink → bearish rotation or failure
• Gold → equilibrium, room, or edge review
• Indigo → range structure or waiting context
The panel summarizes:
• Range
• Rotation Score
• Balance
• Room
• Action
🚦 Signals & States
• Range Ready → a mature range structure is available
• Bull Rotation → price rotated upward from equilibrium
• Bear Rotation → price rotated downward from equilibrium
• Midpoint Hold → price remains controlled by the equilibrium band
• Edge Review → price reached the active range edge
• Failed → rotation moved back through the failure rail
• READY → rotation quality and room are strong enough to monitor
• MONITOR → rotation is active but not fully ready
• WAIT RANGE → no mature range exists
• WAIT ROTATION → range exists but no clean rotation has started
🔔 Alerts Logic
Alerts can trigger when a mature range appears, when bullish or bearish rotation begins, when READY state appears, when midpoint hold appears, when an edge is reached, or when the rotation fails.
Alerts are attention markers only. They are not trade instructions.
🧩 Confluence Logic
The context becomes stronger when range maturity, balanced edge interaction, midpoint departure, edge room, and failure distance align.
The script avoids treating midpoint noise as a clean rotation without confirmation.
📊 When to Use
• Sideways markets with visible range structure
• Crypto, forex, indices, and liquid stocks
• 1H, 4H, and 1D market structure review
• Mean-reversion planning inside a range
• Range edge preparation without waiting for breakout-only logic
⚠️ When NOT to Use
• Strong one-directional trends with no range structure
• Thin symbols with unreliable highs and lows
• News-driven candles that distort range boundaries
• Very small ranges where spread or tick noise dominates
• Markets with unstable data or irregular sessions
🎛️ Key Inputs
• Range Lookback → controls the structure used to build the range
• Minimum / Maximum Range Height ATR → filters ranges that are too small or too wide
• Edge Touch Tolerance → controls how edge interactions are counted
• Equilibrium Band ATR → controls midpoint band width
• Rotation Break Buffer → controls how far price must move beyond equilibrium
• Minimum Ready Score → controls READY strictness
• Projection Bars → controls how far boxes, rails, and tags extend
• Visual settings → control labels, tags, panel location, theme, and font size
🖥️ Interface & Visual Design
The panel is designed to show the range state, rotation quality, balance, room, and action without overloading the chart.
The first row uses a merged AG Pro header. The chart layer keeps the range and equilibrium structure visible while leaving room for price action.
Labels are controlled with cooldown and maximum count settings to preserve a premium screenshot style.
🧪 Practical Usage Workflow
1. Read the panel.
2. Confirm a mature range exists.
3. Check whether price is still at equilibrium or rotating away.
4. Review room to the active edge.
5. Watch the failure rail if rotation loses control.
🔍 Interpretation Guidelines
A high score means range maturity, midpoint departure, and edge room are aligned.
A midpoint hold means equilibrium is still controlling the auction.
An edge review means the rotation has reached the active range edge and should be interpreted as context, not as an automatic exit.
A failed state means the active rotation moved back through its failure boundary.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an automated trading system.
It does not place orders.
It does not guarantee edge reach, reversal, breakout, or profitability.
⚠️ Limitations & Transparency
Range boundaries can shift as new highs or lows appear.
Different timeframes may show different range structures.
Large volatility events can temporarily distort range height and edge touch quality.
Low liquidity may create unreliable equilibrium or edge behavior.
The script is rule-based and should be interpreted within broader market context.
🧠 Market Context Notes
Equilibrium is often where the market decides whether price will rotate toward an edge or remain balanced.
The strongest rotation contexts usually appear when price leaves midpoint with room, while failure remains clearly defined.
This script is designed to make that inside-range decision point easier to read.
🧾 Use Case Examples
When price holds near midpoint and then closes above the equilibrium band, the script can begin tracking bullish rotation toward the upper range edge.
When price rotates downward from equilibrium and reaches the lower edge, the context shifts into edge review rather than fresh entry signaling.
When price moves back through the failure rail, the active rotation context fails.
🧱 System Philosophy
AGPro Series tools are built as decision-support systems.
They aim to convert market structure into readable context: what is active, what improves the plan, what invalidates it, and what should be reviewed next.
🔐 Non-Promise Statement
No script can provide certainty.
No signal guarantees outcome.
This tool provides structured context only.
📉 Risk Disclosure
Trading involves risk.
Markets can move quickly and unexpectedly.
Users are responsible for their own analysis, risk management, and decisions.
This script does not provide financial advice.
📚 Educational Note
Use this tool to study how range equilibrium, midpoint control, rotation quality, and edge room interact across different symbols and timeframes.
インジケーター
Wick Absorption Reversal Planner [AGPro Series]Wick Absorption Reversal Planner
🧠 Core Idea
Is an extended wick showing absorption, and did the candle body reclaim enough structure to treat the reversal context seriously?
📌 Overview / What it does
Wick Absorption Reversal Planner maps extended wick reactions as absorption pockets and evaluates whether price can reclaim the body rail after that reaction.
The script displays a wick absorption pocket, body reclaim rail, failure shelf, room reference, event labels, right-side tags, optional bar coloring, and a compact AG Pro dashboard with a 0-100 reversal score.
It does not predict reversals. It helps organize wick absorption, body reclaim quality, pressure, room, invalidation, and action state.
🎯 Purpose & Design Philosophy
Many candle tools label rejection candles, engulfing candles, or generic wick events.
This script was built for the next layer: whether the wick reaction is being absorbed and whether the candle body can reclaim the important zone afterward.
It helps traders separate random wick noise from a structured absorption pocket with a body reclaim rail and failure logic.
⚡ Why This Script Is Different
Most wick indicators focus on the wick itself.
This script does NOT treat every long wick as a reversal signal.
Instead, it maps the wick pocket, checks body reclaim, measures pressure and room, and gives a clear action state. The goal is interpretation, not prediction.
⚙️ Methodology
1. Wick Absorption Detection
The script checks upper and lower wick size relative to ATR and total candle range.
2. Context Mapping
The wick is compared with recent structure to avoid treating every isolated candle as meaningful.
3. Body Reclaim Evaluation
After a wick absorption pocket is detected, the body reclaim rail becomes the key threshold for reversal planning.
4. Visual Output
The chart receives the wick pocket, body reclaim rail, failure shelf, room rail, labels, right-side tags, optional bar coloring, and dashboard panel.
🗺️ How to Read the Chart
The wick absorption pocket marks the area created by the extended wick reaction.
The body reclaim rail shows the level price needs to recover for the reversal context to improve.
The failure shelf marks where the absorption context fails.
The room rail marks the nearest structure reference in the reversal direction.
Labels highlight wick absorption, body reclaim, pocket pressure, room tests, and absorption failure.
Colors represent context:
• Teal → bullish wick absorption
• Pink → bearish wick absorption or failure
• Gold → room reference or waiting context
• Indigo → pocket pressure or monitoring context
The panel summarizes:
• Pocket
• Reversal Score
• Pressure
• Room
• Action
🚦 Signals & States
• Bull Wick Absorption → lower wick absorption pocket detected
• Bear Wick Absorption → upper wick absorption pocket detected
• Body Reclaim → price reclaimed the body rail after absorption
• Pocket Pressure → price is testing the wick pocket without clean reclaim
• Room Test → price reached the active room reference
• Absorption Failed → price crossed the failure shelf
• READY → body reclaim and score quality are strong enough to monitor
• MONITOR → pocket or reclaim context is active but not fully ready
• WAIT → no strong active context exists
• INVALIDATED → the wick absorption context failed
• EXPIRED → the pocket is too old to remain active
🔔 Alerts Logic
Alerts can trigger when a bullish or bearish wick absorption pocket appears, when body reclaim appears, when READY state appears, when pocket pressure appears, when the room rail is reached, or when absorption fails.
Alerts are attention markers only. They are not trade instructions.
🧩 Confluence Logic
The context becomes stronger when wick size, wick-to-range ratio, structural location, participation, body reclaim, and room align.
For example, a lower wick into recent structure followed by body reclaim and available room is more useful than a random wick in the middle of noisy price action.
📊 When to Use
• Reversal watch areas after extended wicks
• Support/resistance reactions with visible rejection
• Pullbacks where wick absorption may matter
• Failed breakdown or failed breakout reactions
• Liquid symbols with readable candles and stable spreads
• 1h, 4h, and 1D charts where wick structure is visible
⚠️ When NOT to Use
• Very low-liquidity markets
• Symbols with unreliable candle structure
• Random spike candles from illiquid prints
• News candles with unstable spreads
• Extremely noisy ranges where every candle has exaggerated wicks
🎛️ Key Inputs
• ATR Length → controls normalization for wick size and visual spacing
• Wick Context Lookback → controls structural comparison
• Minimum Wick ATR → controls required wick size
• Minimum Wick / Range → controls required wick dominance inside the candle
• Minimum Relative Volume → filters very thin wick reactions
• Body Reclaim Buffer ATR → controls the reclaim rail threshold
• Failure Buffer ATR → controls where absorption fails
• Room Lookback → controls the room reference
• Visual settings → control pocket, rails, labels, tags, panel, and bar colors
🖥️ Interface & Visual Design
The visual hierarchy is designed around the wick pocket first, then the reclaim rail.
The pocket defines the reaction, the body reclaim rail defines improvement, the failure shelf defines risk, and the panel gives a quick state read.
The goal is a premium wick absorption map without turning the chart into a generic candle-label board.
🧪 Practical Usage Workflow
1. Check whether a wick absorption pocket is active
2. Read the reversal score and action state
3. Inspect the body reclaim rail
4. Compare pocket pressure with room
5. Watch the failure shelf
6. Confirm the context with broader structure and timeframe alignment
🔍 Interpretation Guidelines
A wick absorption pocket means the candle showed a meaningful wick reaction in context.
Body reclaim means price recovered the reclaim rail after the wick reaction.
READY means the rule-based context has enough quality to monitor.
Room is a reference for structure, not a promised target.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a guaranteed reversal system.
It is not a generic candle pattern detector.
It is not a volume absorption zone engine.
It is not an automated trading tool.
It does not provide financial advice.
It does not guarantee reversal, continuation, profit, or a specific target.
⚠️ Limitations & Transparency
Wick behavior depends on market structure, liquidity, volatility, session conditions, and timeframe.
Some long wicks are random noise.
Some absorption pockets may fail quickly.
The score is a rule-based context score, not a certainty model.
🧠 Market Context Notes
Wicks can show rejection, absorption, stop activity, or simply noise.
The key question is whether price can reclaim the body rail after the wick event.
Use the pocket as context, not as confirmation by itself.
🧾 Use Case Examples
When price prints a long lower wick into recent structure, the script can map a bullish wick absorption pocket.
If price later reclaims the body rail, the script marks body reclaim and updates the panel state.
If price loses the failure shelf, the script marks absorption failure.
🧱 System Philosophy
This script follows the AGPro Series approach: turn a familiar chart behavior into a structured decision-support map.
The focus is not prediction. The focus is wick context, body reclaim, pressure, room, invalidation awareness, and visual clarity.
🔐 Non-Promise Statement
No script can remove uncertainty from markets.
This tool does not promise accuracy, profitability, or future price movement.
Its purpose is to organize wick absorption context so the user can interpret the chart more clearly.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly, and any analytical output can fail.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Do not read a wick by itself.
The strongest reads usually come when wick absorption, body reclaim, structure, participation, and room align.
インジケーター
Breakout Base Defense Planner [AGPro Series]Breakout Base Defense Planner
🧠 Core Idea
After a breakout, is the original base being defended or is price losing control back into the base?
📌 Overview / What it does
Breakout Base Defense Planner maps the structure price broke from and tracks whether the broken base edge is being defended.
The script displays the breakout base, a projected base defense zone, defense rail, failure shelf, room reference, defense labels, pressure labels, invalidation labels, right-side tags, and a compact AG Pro dashboard.
It does not predict that a breakout will continue. It helps organize the post-breakout base context: defense score, pressure, room, failure risk, and action state.
🎯 Purpose & Design Philosophy
Many breakout tools focus on the breakout candle or the first follow-through move.
This script was built for a different question: does the original base still matter after the breakout?
It helps traders separate clean base defense from weak breaks that fall back into the structure they came from.
⚡ Why This Script Is Different
Most breakout indicators highlight breakouts or target projections.
This script does NOT build a full R ladder, position planner, or generic breakout continuation system.
Instead, it focuses on the broken base itself: the base box, defense zone, pressure behavior, failure shelf, target room reference, and clear action state.
⚙️ Methodology
1. Base Detection
The script defines a recent base using completed bars and filters it by ATR-based width.
2. Breakout Lock
When price closes beyond the base edge with enough displacement and participation, the base is locked as the active reference.
3. Defense Evaluation
The broken base edge becomes a defense zone. The script checks whether price holds, pressures, or loses that zone.
4. Visual Output
The chart receives a breakout base box, defense zone, defense rail, failure shelf, room rail, labels, right-side tags, optional bar coloring, and a dashboard panel.
🗺️ How to Read the Chart
The breakout base shows the structure price broke from.
The defense zone marks the broken edge that should act as support in bullish breaks or resistance in bearish breaks.
The failure shelf marks where the base defense context fails.
The room rail marks the nearest swing-room reference beyond the breakout direction.
Labels highlight base lock, base defended, defense pressure, room tests, and base lost events.
Colors represent context:
• Teal → bullish base defense
• Pink → bearish base defense or invalidation
• Gold → room reference or waiting context
• Indigo → pressure or monitoring context
The panel summarizes:
• Base
• Defense Score
• Pressure
• Room
• Action
🚦 Signals & States
• Bull Base Breakout → price closed above the base with acceptable quality
• Bear Base Breakout → price closed below the base with acceptable quality
• Base Defended → price tested the broken edge and closed back in the breakout direction
• Defense Pressure → price is testing the defense zone without a clean hold
• Room Test → price reached the active room reference
• Base Lost → price closed beyond the failure shelf
• READY → base defense quality is strong enough to monitor
• MONITOR → price is actively testing the base defense zone
• WAIT → no strong active context exists
• INVALIDATED → the base defense context failed
• EXPIRED → the locked base is too old to remain active
🔔 Alerts Logic
Alerts can trigger when a breakout base is locked, when the base is defended, when READY state appears, when defense pressure appears, when the room rail is reached, or when the base is lost.
Alerts are attention markers only. They are not trade instructions.
🧩 Confluence Logic
The base defense context becomes stronger when the breakout base is well-sized, the breakout close has quality, the defense zone holds, participation is acceptable, and target room remains available.
When base defense and room align, the structure is cleaner. When price presses through the defense zone toward the failure shelf, the context weakens.
📊 When to Use
• After clear breakout moves
• During breakout retests
• When price returns to a broken range edge
• In trending markets where base defense matters
• On liquid symbols with readable structure and volume
• On 4h and 1D charts where base boxes remain visually clear
⚠️ When NOT to Use
• Very low-liquidity markets
• Extremely noisy sideways ranges
• Breakouts without a meaningful base
• News candles with unstable spreads
• Late moves where the base is already too far away to matter
🎛️ Key Inputs
• Base Lookback Bars → controls how the breakout base is detected
• Minimum / Maximum Base Range ATR → filters bases that are too small or too large
• Break Buffer ATR → controls how far beyond the base price must close
• Minimum Break Body Ratio → filters weak wick-only breaks
• Minimum Relative Volume → filters low-participation breaks
• Defense Zone ATR → controls the defended zone around the broken edge
• Failure Buffer ATR → controls where base defense fails
• Target Room Lookback → controls the nearest swing-room reference
• Visual settings → control boxes, rails, labels, tags, panel, and bar colors
🖥️ Interface & Visual Design
The visual design is built around the original base.
The base box provides context, the defense zone shows the key retest area, the failure shelf defines where the idea weakens, and the panel compresses the state into a quick decision-support read.
The goal is a premium, structured chart that feels like a breakout defense map, not a crowded signal board.
🧪 Practical Usage Workflow
1. Check whether a breakout base is active
2. Read the defense score and action state
3. Inspect the defense zone
4. Compare pressure with room
5. Watch the failure shelf for invalidation
6. Confirm the context with broader market structure
🔍 Interpretation Guidelines
A READY state means the base defense context has enough structure to monitor.
Defense pressure means price is testing the broken base edge and the context needs attention.
Base defended means price reacted at the edge, but it does not guarantee continuation.
Room measures available structure beyond the current price, not a promised target.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a guaranteed breakout system.
It is not an R-ladder tool.
It is not a position sizing tool.
It is not an automated trading tool.
It does not provide financial advice.
It does not guarantee continuation, reversal, profit, or a specific target.
⚠️ Limitations & Transparency
Breakout base behavior depends on market structure, volatility, liquidity, timeframe, and participation.
Some defended bases may later fail.
Some failed bases may reclaim again later.
The score is a rule-based context score, not a certainty model.
🧠 Market Context Notes
Breakout bases often become important memory zones.
When price breaks out and later defends the original edge, the structure can remain organized.
When price falls back through the edge and failure shelf, the breakout context becomes weaker.
🧾 Use Case Examples
When price breaks above a recent base, the script locks the base and projects a defense zone around the broken edge.
If price returns to the defense zone and closes back above the edge, the script can mark base defense.
If price closes through the failure shelf, the script marks the base as lost.
🧱 System Philosophy
This script follows the AGPro Series approach: turn one important market structure question into a focused decision-support map.
The focus is not prediction. The focus is base context, defense quality, pressure awareness, failure logic, and visual clarity.
🔐 Non-Promise Statement
No script can remove uncertainty from markets.
This tool does not promise accuracy, profitability, or future price movement.
Its purpose is to organize breakout base defense context so the user can interpret the chart more clearly.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly, and any analytical output can fail.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
A breakout is not complete just because price leaves a base.
The quality of the first base defense can often provide more useful context than the breakout candle alone.
インジケーター
Prior Close Reclaim Planner [AGPro Series]Prior Close Reclaim Planner
🧠 Core Idea
Is the prior close being reclaimed, rejected, or treated as a live magnet by the current market?
📌 Overview / What it does
Prior Close Reclaim Planner maps the completed prior close as a live support/resistance reference and evaluates how price reacts around that level.
The script displays a prior-close rail, an ATR-based reclaim pocket, reclaim labels, rejection labels, magnet-zone labels, right-side reference tags, and a compact AG Pro dashboard with a 0-100 reclaim score.
It does not predict where price will go next. It helps organize the reaction around the previous close: reclaim quality, rejection pressure, magnet risk, rail state, and action context.
🎯 Purpose & Design Philosophy
The previous close is one of the simplest reference levels on a chart, but it is often read too casually.
This script was built to turn that reference into a structured planning map. It helps traders see whether the prior close is acting as support, resistance, a magnet, or a failed reclaim zone.
The design supports a patient decision-support mindset: read the rail, evaluate the reaction, check the score, and place the output inside broader market context.
⚡ Why This Script Is Different
Most tools draw a prior close line and stop there.
This script does NOT treat the prior close as a passive horizontal level.
Instead, it builds an active reclaim planner with a pocket, reaction labels, magnet context, relative-volume support, volatility fit, a readiness score, and a clear action state.
⚙️ Methodology
1. Prior Close Detection
The script sources the completed prior close from the selected reference timeframe. Daily is the default setting for previous-session analysis.
2. Reclaim Pocket Mapping
An ATR-based pocket is created above and below the prior close. This pocket is used to avoid overreacting to tiny ticks around the rail.
3. Reaction Evaluation
The script evaluates close location, wick response, relative volume, distance from the rail, and volatility fit.
4. Visual Output
The chart receives the rail, pocket, labels, right-side tags, bar coloring if enabled, and a dashboard panel summarizing the current state.
🗺️ How to Read the Chart
The central rail shows the completed prior close.
The pocket around the rail shows where reclaim and rejection behavior is evaluated.
Labels highlight bullish reclaim, bearish reclaim, rail defense, rail rejection, magnet-zone entries, and failed reclaim behavior.
Colors represent context:
• Teal → bullish reclaim or defense
• Pink → bearish reclaim or rejection
• Gold → neutral or waiting context
• Indigo → magnet or monitoring context
The panel summarizes:
• Prior Close
• Reclaim Score
• Magnet Risk
• Rail State
• Action
🚦 Signals & States
• Bull Prior Close Reclaim → price closed above the reclaim pocket
• Bear Prior Close Reclaim → price closed below the reclaim pocket
• Rail Defense → price tested the pocket and closed back above it
• Rail Rejection → price tested the pocket and closed back below it
• Magnet Zone → price is close enough to the prior close to treat the rail as active
• Invalidated → a reclaim attempt failed back through the prior-close rail
• READY → reclaim/rejection quality is strong enough to monitor
• MONITOR → price is near the rail, but conditions are not fully ready
• WAIT → no strong prior-close reaction is active
🔔 Alerts Logic
Alerts can trigger when price reclaims the prior close pocket, rejects the pocket, enters the magnet zone, reaches READY conditions, or invalidates a reclaim attempt.
Alerts are attention markers only. They are not trade instructions.
🧩 Confluence Logic
The prior-close context becomes stronger when close location, wick response, relative volume, volatility fit, and distance from the rail align.
For example, a reclaim with strong close quality, acceptable volume, and controlled distance from the rail is more structured than a weak close far from the reference.
📊 When to Use
• Intraday trading around the previous session close
• Session reclaim or rejection analysis
• Support/resistance reaction planning
• Trending markets that retest the prior close
• Range conditions where the prior close acts as a magnet
• Liquid symbols with readable candles and stable spreads
⚠️ When NOT to Use
• Very low-liquidity markets
• Symbols with unreliable session structure
• Extremely noisy chop around the rail
• News candles with unstable spreads
• Markets where the selected reference timeframe is not meaningful
🎛️ Key Inputs
• Reference Timeframe → controls where the completed prior close comes from
• Reclaim Pocket ATR → controls the width of the reaction pocket around the rail
• Magnet Distance ATR → controls when price is treated as close enough to the rail
• Minimum Ready Score → controls the score required for READY state
• Relative Volume Length → controls participation comparison
• Confirmation Mode → controls how strict reclaim/rejection evaluation should be
• Visual settings → control rails, pockets, labels, tags, bar colors, and dashboard behavior
🖥️ Interface & Visual Design
The interface is built for fast chart reading.
The prior close rail creates the main reference, the pocket defines the active reaction area, labels mark important events, and the panel compresses the state into a clean decision-support dashboard.
The goal is a premium, readable chart without turning the prior close into a cluttered signal board.
🧪 Practical Usage Workflow
1. Read the panel action state
2. Check whether price is above, below, or inside the prior-close pocket
3. Evaluate reclaim or rejection labels
4. Compare score quality with magnet risk
5. Confirm the context with broader structure, volume, and timeframe alignment
🔍 Interpretation Guidelines
A READY state means the prior-close reaction has enough structure to monitor.
Magnet risk means price is still close enough to the rail for the prior close to matter.
A reclaim label means the market crossed beyond the pocket, not that continuation is guaranteed.
A rejection or defense label means price reacted at the rail, but the broader trend and volatility context still matter.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a guaranteed prior-close trading system.
It is not an automated trading tool.
It does not provide financial advice.
It does not guarantee continuation, reversal, profit, or a specific target.
⚠️ Limitations & Transparency
Prior-close behavior depends on market structure, volatility, liquidity, session design, and timeframe.
Different symbols may treat the previous close differently.
Very noisy markets can trigger frequent pocket interactions.
The score is a rule-based context score, not a certainty model.
🧠 Market Context Notes
The prior close often acts as a memory level.
When price reclaims it with participation, the rail may become a useful support/resistance reference.
When price repeatedly returns to it without follow-through, the rail may behave more like a magnet than a directional level.
🧾 Use Case Examples
When price opens below the prior close and later reclaims the pocket, the script marks the reclaim and scores the quality of the reaction.
When price tests the prior close from above and closes back above the pocket, the script can mark rail defense.
When price stays close to the rail without clean displacement, the panel can shift toward MONITOR instead of forcing a directional read.
🧱 System Philosophy
This script follows the AGPro Series approach: turn a familiar chart reference into a structured decision-support map.
The focus is not prediction. The focus is context, quality, invalidation awareness, and visual clarity.
🔐 Non-Promise Statement
No script can remove uncertainty from markets.
This tool does not promise accuracy, profitability, or future price movement.
Its purpose is to organize prior-close context so the user can interpret the chart more clearly.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly, and any analytical output can fail.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Use the prior close as a reference, not as an automatic decision.
The best reads usually come when the rail reaction aligns with structure, liquidity, volume, and the broader market environment.
インジケーター
Post-Breakout Risk Ladder [AGPro Series]Post-Breakout Risk Ladder
🧠 Core Idea
After a breakout happens, is the move still offering clean target room or is pullback risk taking control?
📌 Overview / What it does
Post-Breakout Risk Ladder maps a breakout base, locks the breakout edge, and converts the post-breakout move into a structured R-based risk ladder.
The script displays a breakout base, pullback risk shelf, entry rail, invalidation rail, 1R / 2R / 3R target rails, target defense labels, pullback test labels, and a compact AG Pro dashboard.
It does not predict that a breakout will continue. It helps organize what happens after a breakout: current R, pullback risk, target room, invalidation, and action state.
🎯 Purpose & Design Philosophy
Many breakout tools focus only on the breakout candle.
This script was built for the part that comes next: the risk management phase after the breakout is already visible.
It helps traders read whether the breakout is still structured, whether the pullback is healthy, whether the next target has room, and whether the breakout context has failed.
⚡ Why This Script Is Different
Most breakout indicators highlight the break itself.
This script does NOT treat the breakout as the end of the analysis.
Instead, it builds a post-breakout planning map with a base, entry reference, invalidation shelf, R ladder, pullback risk score, target room, and target defense context.
⚙️ Methodology
1. Breakout Base Detection
The script defines a recent base using completed bars and checks whether price closes beyond the base edge with enough displacement quality.
2. Breakout Lock
When the breakout qualifies, the script locks the base high/low, breakout edge, entry reference, and invalidation edge.
3. Risk Ladder Mapping
Risk is standardized into R units from the breakout entry to invalidation. Target rails are projected as 1R, 2R, and 3R references.
4. Pullback and Defense Evaluation
The script tracks pullback tests into the breakout shelf, current R, target room, and target defense behavior.
🗺️ How to Read the Chart
The breakout base shows the structure that price broke from.
The pullback shelf marks the zone where a retest may remain constructive or become risky.
The entry rail and invalidation rail define the R unit.
The 1R, 2R, and 3R rails show post-breakout target references.
Labels highlight breakout locks, pullback tests, target defense, and invalidation.
The panel summarizes:
• Breakout state
• Current R
• Pullback risk
• Target room
• Action state
🚦 Signals & States
• Bull Breakout → price closed above the breakout base with acceptable quality
• Bear Breakout → price closed below the breakout base with acceptable quality
• Pullback Test → price is testing the post-breakout shelf
• Target Defense → price has reached or interacted with an R target rail
• Invalidated → price lost the active breakout structure
• Expired → the breakout ladder is too old to remain active
🔔 Alerts Logic
Alerts can trigger when a breakout ladder is locked, when the breakout context is READY, when price tests the pullback shelf, when the ladder invalidates, or when target defense appears.
Alerts are attention markers only. They are not trade instructions.
🧩 Confluence Logic
The breakout context becomes stronger when base quality, breakout body strength, relative volume, pullback shelf behavior, and target room align.
The R ladder helps separate structured continuation from late or overextended movement.
📊 When to Use
• After clear range breaks
• During breakout retests
• In trending markets with continuation attempts
• When evaluating post-breakout risk-to-room structure
• On liquid symbols with readable candles and volume
⚠️ When NOT to Use
• Very low-liquidity markets
• Extremely noisy sideways ranges
• Random spike candles without structure
• News candles with unstable spreads
• When no meaningful base exists before the breakout
🎛️ Key Inputs
• Base Lookback Bars → controls how the breakout base is detected
• Break Buffer ATR → controls how far beyond the base price must close
• Minimum Break Body Ratio → filters weak wick-only breaks
• Minimum Relative Volume → filters low-participation breaks
• Retest Shelf ATR → controls the pullback shelf around the broken edge
• Invalidation Buffer ATR → controls where the ladder fails
• Target R Settings → control the 1R / 2R / 3R ladder rails
🖥️ Interface & Visual Design
The visual hierarchy is designed around post-breakout planning.
The base defines context, the shelf defines pullback risk, the rails define R structure, and the panel provides a quick state read.
The goal is to keep the chart useful, structured, and premium without turning it into a cluttered signal board.
🧪 Practical Usage Workflow
1. Check whether a breakout ladder is active
2. Read current R in the panel
3. Inspect the pullback shelf
4. Compare target room with pullback risk
5. Watch invalidation and target defense labels
🔍 Interpretation Guidelines
A READY state means the breakout ladder has enough structure to monitor.
Current R helps measure how far price has moved from the breakout reference.
Pullback risk helps evaluate whether price is still respecting the breakout shelf.
Target room helps avoid treating late moves the same as early moves.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a guaranteed breakout system.
It is not an automated trading tool.
It does not provide financial advice.
It does not guarantee continuation, reversal, targets, or profit.
⚠️ Limitations & Transparency
Breakout quality depends on market structure, volatility, liquidity, and timeframe.
Some breakouts may fail quickly.
Some slow breakouts may not trigger if candle quality or volume is too weak.
R levels are planning references, not guaranteed destinations.
🧠 Market Context Notes
Breakouts are often strongest when structure, participation, and follow-through align.
A breakout with clean target room and controlled pullback risk is different from a late breakout already pressing into extension.
Use the ladder as context, not certainty.
🧾 Use Case Examples
When price breaks above a recent base, the script locks the breakout edge and projects 1R / 2R / 3R references.
If price later pulls back into the shelf, the script marks pullback risk so the user can evaluate whether the structure remains intact.
If price reaches a target rail, target defense labels help identify where the move may need confirmation.
🧱 System Philosophy
AGPro Series tools are built as decision-support engines.
The purpose is to organize market behavior into structure, score, state, and risk context rather than providing blind buy or sell calls.
🔐 Non-Promise Statement
No breakout is certain.
No target rail is guaranteed.
No script can remove risk.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own analysis, decisions, risk management, and execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Use this tool to study how breakout bases, retests, invalidation, current R, and target room interact across different markets and timeframes.
インジケーター
Anchored VWAP Risk Ladder [AGPro Series]Anchored VWAP Risk Ladder
🧠 Core Idea
After an important market event, is price trading close to fair value or becoming extended relative to the anchored VWAP?
📌 Overview / What it does
Anchored VWAP Risk Ladder builds a volume-weighted average price from a selected anchor event and turns the distance from that anchor into a structured risk ladder.
The script displays anchored VWAP, volume-weighted deviation bands, right-side ladder tags, reclaim and lose labels, extension context, and a compact AG Pro panel with distance, score, risk ladder, and action state.
It does not predict price direction, automate trades, or claim that anchored VWAP will hold as support or resistance. It organizes event-based volume-weighted context into a readable chart framework.
🎯 Purpose & Design Philosophy
Anchored VWAP is often useful after a meaningful event, but raw AVWAP alone can be difficult to interpret without context.
This script was built to answer a practical question: how far is price from the anchored value area, and is that distance becoming useful, balanced, or risky?
The design supports traders who think in terms of anchored fair value, risk distance, reclaim behavior, and extension zones.
⚡ Why This Script Is Different
Most VWAP tools show a line and leave interpretation fully manual.
This script does NOT stop at plotting anchored VWAP.
Instead, it builds a complete risk ladder around the anchor, adds deviation context, scores reclaim or lose behavior, and summarizes the current state in a clean dashboard.
⚙️ Methodology
1. Anchor Detection
The script can anchor from manual time, high-volume events, swing pivots, session open, week open, or month open.
2. AVWAP Calculation
From the active anchor, the script accumulates volume-weighted price and volume-weighted variance to calculate anchored VWAP and deviation bands.
3. Risk Ladder Mapping
Distance from anchored VWAP is measured in ATR and deviation terms to classify whether price is near value, inside Band 1, inside Band 2, or extended.
4. Visual Output
The script plots AVWAP, upper/lower deviation bands, ladder fills, event labels, right-side tags, bar state color, and a dashboard.
🗺️ How to Read the Chart
The AVWAP rail represents the volume-weighted average price from the active anchor.
Deviation bands represent the ladder around anchored value.
Labels mark anchor events, AVWAP reclaim events, AVWAP lose events, and optional extension-risk conditions.
The panel shows:
• Anchor → current anchor type and age
• Distance → price distance from AVWAP in ATR
• Risk Ladder → current ladder zone and risk score
• Score → current context score and direction state
• Action → READY / MONITOR / WAIT / BLOCKED
🚦 Signals & States
• Anchor Locked → a new event anchor has been selected
• Ready Reclaim → price has reclaimed anchored VWAP with enough context score
• Ready Lose → price has lost anchored VWAP with enough context score
• Near AVWAP → price is close to anchored value
• Band 1 / Band 2 → price is moving away from anchored value
• Extended → distance from AVWAP is elevated
🔔 Alerts Logic
Alerts can trigger when a new anchor is locked, when price reclaims AVWAP, when price loses AVWAP, or when extension-risk conditions appear.
Alerts are attention markers only. They do not represent trade instructions or guaranteed outcomes.
🧩 Confluence Logic
The context becomes stronger when anchored VWAP reclaim or lose behavior aligns with relative volume, acceptable distance, and a clear ladder state.
The risk ladder helps separate balanced conditions from extension conditions.
📊 When to Use
• After high-volume market events
• Around earnings, news, breakout, or liquidation-style candles
• During trend continuation pullbacks
• When studying institutional average price context
• On liquid symbols with meaningful volume data
⚠️ When NOT to Use
• Very low-liquidity symbols
• Markets with unreliable or synthetic volume
• Extremely choppy conditions where anchors reset too often
• Situations where the selected anchor is not meaningful
• When using AVWAP as a standalone trading signal
🎛️ Key Inputs
• Anchor Mode → controls how AVWAP is anchored
• Manual Anchor Time → user-defined anchor timestamp
• High Volume Anchor Threshold → controls automatic high-volume anchors
• Deviation Band 1 / 2 → controls ladder width
• Extension Risk ATR → controls when distance becomes elevated
• Minimum Ready Score → controls reclaim or lose strictness
• Visual Settings → control bands, labels, tags, panel, and bar colors
🖥️ Interface & Visual Design
The interface is built for fast visual hierarchy.
AVWAP is the central reference, deviation bands define the risk ladder, right-side tags make the ladder readable, and the panel summarizes state without forcing the user to inspect every line manually.
🧪 Practical Usage Workflow
1. Choose the anchor mode
2. Read the active anchor and distance in the panel
3. Check whether price is near AVWAP or extended
4. Watch reclaim or lose labels around AVWAP
5. Use broader structure and risk context before making any decision
🔍 Interpretation Guidelines
Price near AVWAP often represents a balanced value area relative to the anchor.
Price far from AVWAP may represent stronger trend behavior, but it may also carry extension risk.
READY states mark meaningful reclaim or lose behavior, not certainty.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not an automated trading system.
It does not guarantee support, resistance, continuation, reversal, or profit.
It is not financial advice.
⚠️ Limitations & Transparency
Anchored VWAP quality depends heavily on anchor selection.
Different timeframes may produce different anchor timing and visual structure.
Volume data quality may vary between symbols, brokers, and exchanges.
Deviation bands are statistical references, not fixed market boundaries.
🧠 Market Context Notes
Anchored VWAP works best when the anchor represents a meaningful market event.
High-volume displacement, swing pivots, session opens, weekly opens, and monthly opens may each tell a different story.
The user should choose the anchor mode that best fits the market question.
🧾 Use Case Examples
When a high-volume candle creates a new anchor, the script tracks whether price remains near the anchored value area or begins to extend away from it.
When price reclaims AVWAP with enough score, the script marks a READY reclaim context.
When price loses AVWAP with enough score, the script marks a READY lose context.
🧱 System Philosophy
AGPro Series tools are built as decision-support engines.
The purpose is to structure market context into readable zones, states, scores, and risk references without turning analysis into blind signal-following.
🔐 Non-Promise Statement
No script can provide certainty.
No AVWAP level guarantees a reaction.
No signal guarantees continuation, reversal, or profit.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own analysis, decisions, risk management, and execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Use this tool to study how anchored value, volume-weighted distance, deviation bands, reclaim behavior, and extension risk interact across different market conditions.
インジケーター
Supply Demand Flip Planner [AGPro Series]Supply Demand Flip Planner
🧠 Core Idea
Has an old supply or demand zone changed role and started acting as the opposite side of the market?
📌 Overview / What it does
Supply Demand Flip Planner is a role-change price action tool designed to identify when a prior supply zone turns into demand, or when a prior demand zone turns into supply.
The script detects pivot-based supply and demand zones, monitors breaks through those zones, maps the active flip zone, evaluates retest acceptance, and displays a structured 0-100 score. It also shows invalidation shelves, target rails, centered zone text, labels, and a compact AG Pro dashboard.
It does not predict future price movement, automate trades, or provide guaranteed buy/sell signals. It is a visual decision-support framework for reading supply-demand flip behavior.
🎯 Purpose & Design Philosophy
This script was built for traders who watch support/resistance role reversal but want a cleaner way to separate meaningful flips from ordinary breaks.
Many zones break and never matter again. Some zones break, retest, and start acting as the opposite side of the market. This planner focuses on that role-change moment.
The design supports a structured workflow: map supply and demand, wait for break, monitor retest, evaluate acceptance, then track invalidation.
⚡ Why This Script Is Different
Most supply and demand tools draw zones and leave interpretation fully manual.
This script does NOT simply flood the chart with historical zones.
Instead, it focuses on the active role-change zone, measures retest quality, scores acceptance, and presents the result through a clear READY / MONITOR / WAIT / INVALIDATED framework.
⚙️ Methodology
1. Context Detection
The script detects pivot-based supply and demand zones using configurable left/right pivot confirmation.
2. Reference Mapping
It maps source supply and demand shelves, then converts a broken zone into an active flip zone.
3. Reaction Evaluation
When price retests the flip zone, the script evaluates break strength, retest depth, wick response, body quality, source-zone quality, freshness, and relative volume.
4. Visual Output
The active flip zone is shown with centered text, invalidation shelf, target rails, right-side tags, labels, and an AG Pro panel.
🗺️ How to Read the Chart
Supply zones represent pivot-based resistance shelves.
Demand zones represent pivot-based support shelves.
Demand Flip means old supply has been broken and is being evaluated as new demand.
Supply Flip means old demand has been broken and is being evaluated as new supply.
READY FLIP labels mark retests that pass the selected acceptance score.
Invalidation shelf marks where the flip context weakens or fails.
The AG Pro panel summarizes Flip State, Acceptance, Retest, Failure Risk, and Action.
🚦 Signals & States
• DEMAND → pivot-based demand zone mapped.
• SUPPLY → pivot-based supply zone mapped.
• DEMAND FLIP → old supply was broken and is being watched as new demand.
• SUPPLY FLIP → old demand was broken and is being watched as new supply.
• FLIP RETEST → price is interacting with the active flip zone.
• READY FLIP → retest acceptance reached the required score threshold.
• INVALIDATED → the active flip lost its invalidation edge.
• READY → qualified flip acceptance is active.
• MONITOR → the flip zone is active or retesting.
• WAIT → no qualified flip acceptance is active.
🔔 Alerts Logic
Demand Flip Locked triggers when price breaks above a prior supply zone.
Supply Flip Locked triggers when price breaks below a prior demand zone.
Demand Flip Acceptance Ready triggers when a bullish flip retest reaches the score threshold.
Supply Flip Acceptance Ready triggers when a bearish flip retest reaches the score threshold.
Supply Demand Flip Retest triggers when price interacts with the active flip zone.
Supply Demand Flip Invalidated triggers when the flip loses its invalidation shelf.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The strongest flip contexts appear when break strength, retest depth, wick response, close quality, source-zone quality, freshness, and relative volume align.
When a broken zone is retested cleanly and accepted from the opposite side, the score improves and the panel shifts toward a stronger action state.
📊 When to Use
• Support/resistance role reversal
• Breakout retests
• Trend continuation after zone breaks
• Failed range boundaries that become new reaction zones
• Markets with clear swing structure
⚠️ When NOT to Use
• Extremely noisy markets with weak pivot structure
• Very low liquidity symbols
• Markets with large spread or unreliable candles
• News spikes where zones break and fail too quickly
• Timeframes where pivot zones are too dense or too sparse
🎛️ Key Inputs
• Pivot Left / Right Bars → control how strict the source zone detection is.
• Zone Depth ATR → controls the thickness of supply and demand shelves.
• Break Buffer ATR → requires price to break beyond the source zone by a volatility-adjusted amount.
• Retest Window Bars → controls how long the flip remains relevant.
• Acceptance Buffer ATR → defines how much confirmation is required after retest.
• Invalidation Buffer ATR → controls the failure shelf beyond the flip zone.
• Minimum Ready Score → sets how strict READY labels should be.
• Visual Settings → control zones, labels, centered zone text, target rails, and right-side tags.
• Panel Settings → control panel visibility, location, theme, and font size.
🖥️ Interface & Visual Design
The interface is designed to make role-change structure readable without overwhelming the chart.
The active flip zone uses centered text so the purpose of the zone is immediately visible. Source zones are subtle, while READY labels and target rails stand out only when a valid acceptance context appears.
The panel gives a quick summary of the current flip state and risk context.
🧪 Practical Usage Workflow
1. Identify the latest supply and demand zones.
2. Wait for a zone to break and become a flip candidate.
3. Watch for retest interaction inside the flip zone.
4. Check the READY FLIP label and acceptance score.
5. Compare price with invalidation shelf and target rails.
6. Confirm broader trend, volatility, and liquidity before making decisions.
🔍 Interpretation Guidelines
A high acceptance score means the role-change reaction is cleaner according to the script's rules.
A pending retest means price has returned to the zone but has not yet shown enough acceptance.
A failed flip means price lost the invalidation edge and the role-change context should be treated as weakened.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an automated trading system.
It does not guarantee entries, exits, profits, or outcomes.
⚠️ Limitations & Transparency
Pivot-based zones are confirmed after the selected right-side bars, so source zones appear after confirmation.
Different timeframes can create very different supply and demand structures.
High volatility can cause quick break-and-fail behavior around zones.
No rule-based script can fully account for news, liquidity shocks, or sudden market structure changes.
🧠 Market Context Notes
Supply-demand flips are a form of role reversal.
Old resistance can become new support after acceptance. Old support can become new resistance after acceptance.
The script is strongest when used with broader market structure, trend context, liquidity, and volatility analysis.
🧾 Use Case Examples
When price breaks above a supply zone, returns to the zone, and holds above it with clean reaction quality, the script may mark a Demand Flip acceptance.
When price breaks below a demand zone, retests it from below, and rejects cleanly, the script may mark a Supply Flip acceptance.
🧱 System Philosophy
Supply Demand Flip Planner follows the AG Pro Series approach: transform a common market concept into a structured decision map with context, score, risk reference, and clean visuals.
The goal is not to replace judgment. The goal is to make role-change analysis easier to read.
🔐 Non-Promise Statement
No script can provide certainty.
No signal should be treated as guaranteed.
Outputs should always be interpreted with independent analysis and responsible risk control.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
This script is designed to help traders study how supply zones, demand zones, breakout retests, and role-change acceptance behave across different market conditions.
インジケーター
Fair Value Gap Reclaim Planner [AGPro Series]Fair Value Gap Reclaim Planner
🧠 Core Idea
Has price returned into a fair value gap and reclaimed the imbalance midpoint with enough quality?
📌 Overview / What it does
Fair Value Gap Reclaim Planner is an imbalance-focused price action tool built around three-candle fair value gap structure.
The script detects bullish and bearish FVG zones, tracks fill progress, maps the midpoint, evaluates reclaim quality, and displays a structured 0-100 readiness score. It also projects an active reclaim corridor, invalidation shelf, target rails, labels, and a clean AG Pro dashboard.
It does not predict future price movement, automate entries, or provide guaranteed signals. It is a visual framework for reading fair value gap reclaim behavior.
🎯 Purpose & Design Philosophy
This script was built for traders who study imbalance zones but want a cleaner way to separate meaningful reclaim behavior from ordinary gap interaction.
Fair value gaps can attract attention, but not every touch matters. The planner focuses on whether price fills, reacts, and reclaims a meaningful reference level inside the imbalance.
The design supports patient analysis: identify the zone, measure the fill, wait for reclaim, then evaluate context.
⚡ Why This Script Is Different
Most FVG tools highlight many imbalance zones and leave the user to interpret the rest manually.
This script does NOT flood the chart with every historical imbalance.
Instead, it focuses on the active FVG context, tracks fill progress, evaluates midpoint or full-edge reclaim, and converts the reaction into a clear score and action state.
⚙️ Methodology
1. Context Detection
The script detects bullish and bearish three-candle fair value gaps using a minimum ATR-based size filter.
2. Reference Mapping
It maps the FVG top, bottom, midpoint, fill area, and invalidation boundary.
3. Reaction Evaluation
When price interacts with the active FVG, the script evaluates fill progress, reclaim distance, wick response, body quality, relative volume, gap quality, and freshness.
4. Visual Output
Qualified reclaim events are shown with labels, projected zones, target rails, right-side level tags, and a compact panel.
🗺️ How to Read the Chart
FVG Zone shows the active imbalance area.
Midline marks the primary reclaim reference when Midline mode is selected.
Fill Progress shows how deeply price has returned into the imbalance.
READY FVG RECLAIM labels mark reclaim events that meet the selected score threshold.
Invalidation Shelf marks the area where the reclaim context weakens or fails.
The AG Pro panel summarizes Gap State, Reclaim Score, Fill Progress, Risk, and Action.
🚦 Signals & States
• BULL FVG → bullish fair value gap detected and locked.
• BEAR FVG → bearish fair value gap detected and locked.
• READY FVG RECLAIM → price reclaimed the selected FVG reference with enough quality.
• FVG TOUCH → price interacted with the active FVG zone.
• INVALIDATED → the active reclaim context lost the opposite FVG edge.
• READY → a qualified reclaim event is active.
• MONITOR → the active FVG is being tested or a reclaim context remains open.
• WAIT → no qualified reclaim event is active.
🔔 Alerts Logic
Bullish FVG Reclaim Ready triggers when price reclaims the selected FVG reference upward with enough score quality.
Bearish FVG Reclaim Ready triggers when price reclaims the selected FVG reference downward with enough score quality.
FVG Touch triggers when price interacts with the active imbalance zone.
FVG Reclaim Invalidated triggers when the active reclaim context loses the opposite FVG edge.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The strongest reclaim contexts appear when fill progress, wick response, close quality, relative volume, gap size, and freshness align.
When price returns into the imbalance, respects the zone, and reclaims the midpoint or edge with clean reaction quality, the score improves.
📊 When to Use
• Markets with visible imbalance behavior
• Breakout pullbacks into fair value gaps
• Trend continuation reviews
• Reclaim attempts after partial FVG fills
• Intraday or swing contexts where FVG zones remain meaningful
⚠️ When NOT to Use
• Very low liquidity markets
• Extremely noisy or illiquid symbols
• Markets with unreliable candles or volume
• Wide-spread conditions where small gaps are misleading
• News spikes where imbalance zones can be invalidated quickly
🎛️ Key Inputs
• Minimum FVG Size ATR → filters out tiny imbalance zones.
• Maximum FVG Age Bars → controls how long an FVG can remain active.
• Reclaim Reference → chooses midpoint reclaim or full-edge reclaim.
• Touch Lookback Bars → controls how recent the FVG interaction must be.
• Invalidation Buffer ATR → controls the risk shelf beyond the FVG edge.
• Minimum Ready Score → sets how strict READY events should be.
• Target Rails → control projected T1 and T2 levels.
• Label Settings → control label density, size, and spacing.
• Panel Settings → control panel visibility, location, theme, and font size.
🖥️ Interface & Visual Design
The interface is designed to show the active imbalance context without filling the chart with excessive historical zones.
The FVG zone, midline, fill meter, invalidation shelf, target rails, and panel are visually separated so the chart remains readable.
The goal is a premium first-glance layout: zone first, reclaim second, action state third.
🧪 Practical Usage Workflow
1. Check the panel for active Gap State.
2. Locate the FVG zone and midpoint.
3. Watch how deeply price fills the imbalance.
4. Evaluate READY FVG RECLAIM labels and score quality.
5. Compare price with the invalidation shelf and target rails.
6. Confirm broader structure before making decisions.
🔍 Interpretation Guidelines
A high reclaim score means the reaction is cleaner according to the script's rules.
A lower score means the reclaim may be weaker, late, noisy, or incomplete.
Fill progress is not a signal by itself. It becomes more meaningful when combined with reclaim quality and broader market context.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an automated trading system.
It does not guarantee entries, exits, profits, or outcomes.
⚠️ Limitations & Transparency
Fair value gap interpretation can vary across markets, sessions, and timeframes.
Some markets create many small gaps that may not carry meaningful context.
Volatility changes can make an active FVG less relevant over time.
No rule-based script can fully account for news, liquidity shocks, or sudden market structure shifts.
🧠 Market Context Notes
Fair value gaps often represent fast price displacement and temporary imbalance.
The reclaim of a midpoint or edge can help traders study whether the market is accepting or rejecting the imbalance area.
The script works best when combined with structure, liquidity, volatility, and trend context.
🧾 Use Case Examples
When a bullish FVG forms after displacement, price returns into the zone, partially fills it, and then reclaims the midpoint, the script may mark a bullish reclaim context.
When a bearish FVG forms after downside displacement, price retraces into the imbalance and then rejects back below the midpoint, the script may mark a bearish reclaim context.
🧱 System Philosophy
Fair Value Gap Reclaim Planner follows the AG Pro Series approach: turn a popular market concept into a structured decision map with context, score, risk reference, and clean visuals.
It is designed to support judgment, not replace it.
🔐 Non-Promise Statement
No script can provide certainty.
No signal should be treated as guaranteed.
Outputs should always be interpreted with independent analysis and responsible risk control.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
This script is designed to help traders study how fair value gap fills, midpoint reclaims, and imbalance reactions behave across different market conditions.
インジケーター
