FOUR POWER - BUY SELL by coinsspor
Four Power include four diffrent indicator.
Heikin Ashi Smoothed
Marvelous Method
RSI BUY-SELL V3
Tillson T3
U can use all of them same time (it gives one common signal) or u can use only one indicator
for example: if u wanna use only one indicator u must select buy level power as 1 and u must select sell level power as 1 after that u need click on only one indicator
if u seleck higher 1 than indicator u need select buy level power higher
and i advice always to use buy power level > sell power level
Four Power include four diffrent indicator.
Heikin Ashi Smoothed
Marvelous Method
RSI BUY-SELL V3
Tillson T3
U can use all of them same time (it gives one common signal) or u can use only one indicator
for example: if u wanna use only one indicator u must select buy level power as 1 and u must select sell level power as 1 after that u need click on only one indicator
if u seleck higher 1 than indicator u need select buy level power higher
and i advice always to use buy power level > sell power level
リリースノート:
removed level menu
+ u can decide whıch indicator can buy and u can decide whıch indicator can sell
+ u can decide whıch indicator can buy and u can decide whıch indicator can sell
リリースノート:
2 new indicator added
リリースノート:
i added on Marvelous Method 3 munıte and 10 munıte option.and made a document about using.
FIVE POWER BUY SELL INDICATOR
What is Five POWER?
Within Five Power, there are indicators according to 5 different trading strategies. They can be used alone or in combination. When used in combination, the selected indicator moves with the common signal from the selected indicators. You can also make different indicator selections for selling and buying strategies.
Five Power Settings
a.Indicator selection
In this section, "buy strategy" and "sell strategy" are used to select indicators for buy and sell strategies. After that, special settings for that indicator can be made under the indicator headers selected. These special settings may vary depending on the stock market, the stock, and the coin.
b. Indicators
1-MyDouble Indicator
This indicator works according to the intersections of the “Mavilimw” and the “Mor Tırtık” Indicators fib values. Sell Level and Buy Level can take values within the range 1-18. My advised settings are in particular (12-6) or (6-6) for the receive signal.
2-Marvelous Method Indicator
This indicator works according to the specific algorithm according to the candle closures of the relevant time intervals (1h, 15m 4h). Please note that the CHOSE TIME FRAME setting must be entered correctly. This section works for time intervals between 5 minute and 1 day. The other important subject is determining the Scale Range value. The values I recommend for coins are fibo numbers such as 2, 3, 5, 8, 13, 21, 34, 55, 89,144. For example: Use 0.0055 instead of 55. But there are no incentives to try different numbers when adjusting the buy sell points.
Note: If the marvelous method is used alone, the wax type Heiken Ashi should be selected.
3. RSI BUY SELL V3 Indicator
This indicator works according to intersections of two different moving averages and their intersection with RSI(MA1 and MA-2).
4. Tillson T3 Indicator
It shows the moving average developed by Tim Tillson. Activating the T3 line will make our work easier to set the buy and sell points.
5. ZeroLag Ema Indicator
It is an indicator that uses the intersections of Fast ema and slow Ema.
FIVE POWER BUY SELL INDICATOR
What is Five POWER?
Within Five Power, there are indicators according to 5 different trading strategies. They can be used alone or in combination. When used in combination, the selected indicator moves with the common signal from the selected indicators. You can also make different indicator selections for selling and buying strategies.
Five Power Settings
a.Indicator selection
In this section, "buy strategy" and "sell strategy" are used to select indicators for buy and sell strategies. After that, special settings for that indicator can be made under the indicator headers selected. These special settings may vary depending on the stock market, the stock, and the coin.
b. Indicators
1-MyDouble Indicator
This indicator works according to the intersections of the “Mavilimw” and the “Mor Tırtık” Indicators fib values. Sell Level and Buy Level can take values within the range 1-18. My advised settings are in particular (12-6) or (6-6) for the receive signal.
2-Marvelous Method Indicator
This indicator works according to the specific algorithm according to the candle closures of the relevant time intervals (1h, 15m 4h). Please note that the CHOSE TIME FRAME setting must be entered correctly. This section works for time intervals between 5 minute and 1 day. The other important subject is determining the Scale Range value. The values I recommend for coins are fibo numbers such as 2, 3, 5, 8, 13, 21, 34, 55, 89,144. For example: Use 0.0055 instead of 55. But there are no incentives to try different numbers when adjusting the buy sell points.
Note: If the marvelous method is used alone, the wax type Heiken Ashi should be selected.
3. RSI BUY SELL V3 Indicator
This indicator works according to intersections of two different moving averages and their intersection with RSI(MA1 and MA-2).
4. Tillson T3 Indicator
It shows the moving average developed by Tim Tillson. Activating the T3 line will make our work easier to set the buy and sell points.
5. ZeroLag Ema Indicator
It is an indicator that uses the intersections of Fast ema and slow Ema.
リリースノート:
+added 12h and 2d frame for Marvelous Method
+added RSIBANDS on/off option
+added RSIBANDS on/off option
リリースノート:
++ added 9 MA TYPES
++ added stop loss and teake profit .so it works with margin very vell with alerts and with automat bot sytem
++ you can select stop loss level or take profit level as %
++you can select margin mode or only buy-sell mode
++ added stop loss and teake profit .so it works with margin very vell with alerts and with automat bot sytem
++ you can select stop loss level or take profit level as %
++you can select margin mode or only buy-sell mode
リリースノート:
+ Take Profit and Stop Loss improvement and new alert settings
リリースノート:
++Ultimate Smoothed MA added.
++Take Profit-1-2-3 and Trailing Stop added
++new visual features
++Take Profit-1-2-3 and Trailing Stop added
++new visual features
リリースノート:
fixxed wma problem
リリースノート:
wma zero problem fixxed
リリースノート:
removed "my double"
dded new indicator "MOST POWER"
dded new indicator "MOST POWER"
リリースノート:
added TREND MODUL
added new indicator "coinsspor tetra MA"
added new indicator "coinsspor tetra MA"
リリースノート:
added new indicator name is " Inverse Fisher Transform Algo Types"
リリースノート:
Script converted pine script 4 (//@version=4)
リリースノート:
Hello, I have made new updates for fivepower. With these changes, I will be able to apply new methods for algotrade, I will give these methods with alarm setups and syntax codes in this document.
So what updates came?
1.While the trend module was active, we were able to set up a total of 3 alarms for long, short and take profit. The Take profit alarm was common for long and short. With this latest version, take profit alarms are now different for long and short. So we need to set at least 4 alarms while the trend module is active.
2.Trailing Stop options have been added to the trend module. The important point here is trailing stop comes into effect after take profit. It is described on the figure below.
SL_Type was selected as "%" in traling stop that we activated under the trend module and its value was set as 0.5. This means that after the take profit signal, which will come with long and short, trailing stoploss start with 0.5%
trace. For example, we can sell 60% of our order to take profit signal at 2.13% with the long signal, we can sell the remaining 40% with trailing stop signal with 11% profit as you can see in the figure. Related syntax codes will be given in the last part of the document.
So what updates came?
1.While the trend module was active, we were able to set up a total of 3 alarms for long, short and take profit. The Take profit alarm was common for long and short. With this latest version, take profit alarms are now different for long and short. So we need to set at least 4 alarms while the trend module is active.
2.Trailing Stop options have been added to the trend module. The important point here is trailing stop comes into effect after take profit. It is described on the figure below.
SL_Type was selected as "%" in traling stop that we activated under the trend module and its value was set as 0.5. This means that after the take profit signal, which will come with long and short, trailing stoploss start with 0.5%
trace. For example, we can sell 60% of our order to take profit signal at 2.13% with the long signal, we can sell the remaining 40% with trailing stop signal with 11% profit as you can see in the figure. Related syntax codes will be given in the last part of the document.
リリースノート:
>>>>>>added filter modul. Filter modul includes ADX and RSI so u can filter your last signal easly
>>>>>> script converted pine script v4
>>>>>> script converted pine script v4
To access indicators type me on telegram t.me/coinsspor