J12Matic Builder by galgoomA flexible Renko/tick strategy that lets you choose between two entry engines (Multi-Source 3-way or QBand+Moneyball), with a unified trailing/TP exit engine, NY-time trading windows with auto-flatten, daily profit/loss and trade-count limits (HALT mode), and clean webhook routing using {{strategy.order.alert_message}}.
Highlights
Two entry engines
Multi-Source (3): up to three long/short sources with Single / Dual / Triple logic and optional lookback.
QBand + Moneyball: Gate → Trigger workflow with timing windows, OR/AND trigger modes, per-window caps, optional same-bar fire.
Unified exit engine: Trailing by Bricks or Ticks, plus optional static TP/SL.
Session control (NY time): Evening / Overnight / NY Session windows; auto-flatten at end of any enabled window.
Day controls: Profit/Loss (USD) and Trade-count limits. When hit, strategy HALTS new entries, shows an on-chart label/background.
Alert routing designed for webhooks: Every order sets alert_message= so you can run alerts with:
Condition: this strategy
Notify on: Order fills only
Message: {{strategy.order.alert_message}}
Default JSONs or Custom payloads: If a Custom field is blank, a sensible default JSON is sent. Fill a field to override.
How to set up alerts (the 15-second version)
Create a TradingView alert with this strategy as Condition.
Notify on: Order fills only.
Message: {{strategy.order.alert_message}} (exactly).
If you want your own payloads, paste them into Inputs → 08) Custom Alert Payloads.
Leave blank → the strategy sends a default JSON.
Fill in → your text is sent as-is.
Note: Anything you type into the alert dialog’s Message box is ignored except the {{strategy.order.alert_message}} token, which forwards the payload supplied by the strategy at order time.
Publishing notes / best practices
Renko users: Make sure “Renko Brick Size” in Inputs matches your chart’s brick size exactly.
Ticks vs Bricks: Exit distances switch instantly when you toggle Exit Units.
Same-bar flips: If enabled, a new opposite signal will first close the open trade (with its exit payload), then enter the new side.
HALT mode: When day profit/loss limit or trade-count limit triggers, new entries are blocked for the rest of the session day. You’ll see a label and a soft background tint.
Session end flatten: Auto-closes positions at window ends; these exits use the “End of Session Window Exit” payload.
Bar magnifier: Strategy is configured for on-close execution; you can enable Bar Magnifier in Properties if needed.
Default JSONs (used when a Custom field is empty)
Open: {"event":"open","side":"long|short","symbol":""}
Close: {"event":"close","side":"long|short|flat","reason":"tp|sl|flip|session|limit_profit|limit_loss","symbol":""}
You can paste any text/JSON into the Custom fields; it will be forwarded as-is when that event occurs.
Input sections — user guide
01) Entries & Signals
Entry Logic: Choose Multi-Source (3) or QBand + Moneyball (pick one).
Enable Long/Short Signals: Master on/off switches for entering long/short.
Flip on opposite signal: If enabled, a new opposite signal will close the current position first, then open the other side.
Signal Logic (Multi-Source):
Single: any 1 of the 3 sources > 0
Dual: Source1 AND Source2 > 0
Triple (default): 1 AND 2 AND 3 > 0
Long/Short Signal Sources 1–3: Provide up to three series (often indicators). A positive value (> 0) is treated as a “pulse”.
Use Lookback: Keeps a source “true” for N bars after it pulses (helps catch late triggers).
Long/Short Lookback (bars): How many bars to remember that pulse.
01b) QBands + Moneyball (Gate -> Trigger)
Allow same-bar Gate->Trigger: If ON, a trigger can fire on the same bar as the gate pulse.
Trigger must fire within N bars after Gate: Size of the gate window (in bars).
Max signals per window (0 = unlimited): Cap the number of entries allowed while a gate window is open.
Buy/Sell Source 1 – Gate: Gate pulse sources that open the buy/sell window (often a regime/zone, e.g., QBands bull/bear).
Trigger Pulse Mode (Buy/Sell): How to detect a trigger pulse from the trigger sources (Change / Appear / Rise>0 / Fall<0).
Trigger A/B sources + Extend Bars: Primary/secondary triggers plus optional extension to persist their pulse for N bars.
Trigger Mode: Pick S2 only, S3 only, S2 OR S3, or S2 AND S3. AND mode remembers both pulses inside the window before firing.
02) Exit Units (Trailing/TP)
Exit Units: Choose Bricks (Renko) or Ticks. All distances below switch accordingly.
03) Tick-based Trailing / Stops (active when Exit Units = Ticks)
Initial SL (ticks): Starting stop distance from entry.
Start Trailing After (ticks): Start trailing once price moves this far in your favor.
Trailing Distance (ticks): Offset of the trailing stop from peak/trough once trailing begins.
Take Profit (ticks): Optional static TP distance.
Stop Loss (ticks): Optional static SL distance (overrides trailing if enabled).
04) Brick-based Trailing / Stops (active when Exit Units = Bricks)
Renko Brick Size: Must match your chart’s brick size.
Initial SL / Start Trailing After / Trailing Distance (bricks): Same definitions as tick mode, measured in bricks.
Take Profit / Stop Loss (bricks): Optional static distances.
05) TP / SL Switch
Enable Static Take Profit: If ON, closes the trade at the fixed TP distance.
Enable Static Stop Loss (Overrides Trailing): If ON, trailing is disabled and a fixed SL is used.
06) Trading Windows (NY time)
Use Trading Windows: Master toggle for all windows.
Evening / Overnight / NY Session: Define each session in NY time.
Flatten at End of : Auto-close any open position when a window ends (sends the Session Exit payload).
07) Day Controls & Limits
Enable Profit Limits / Profit Limit (Dollars): When daily net PnL ≥ limit → auto-flatten and HALT.
Enable Loss Limits / Loss Limit (Dollars): When daily net PnL ≤ −limit → auto-flatten and HALT.
Enable Trade Count Limits / Number of Trades Allowed: After N entries, HALT new entries (does not auto-flatten).
On-chart HUD: A label and soft background tint appear when HALTED; a compact status table shows Day PnL, trade count, and mode.
08) Custom Alert Payloads (used as strategy.order.alert_message)
Long/Short Entry: Payload sent on entries (if blank, a default open JSON is sent).
Regular Long/Short Exit: Payload sent on closes from SL/TP/flip (if blank, a default close JSON is sent).
End of Session Window Exit: Payload sent when any enabled window ends and positions are flattened.
Profit/Loss/Trade Limit Close: Payload sent when daily profit/loss limit causes auto-flatten.
Tip: Any tokens you include here are forwarded “as is”. If your downstream expects variables, do the substitution on the receiver side.
Known limitations
No bracket orders from Pine: This strategy doesn’t create OCO/attached brackets on the broker; it simulates exits with strategy logic and forwards your payloads for external automation.
alert_message is per order only: Alerts fire on order events. General status pings aren’t sent unless you wire a separate indicator/alert.
Renko specifics: Backtests on synthetic Renko can differ from live execution. Always forward-test on your instrument and settings.
Quick checklist before you publish
✅ Brick size in Inputs matches your Renko chart
✅ Exit Units set to Bricks or Ticks as you intend
✅ Day limits/Windows toggled as you want
✅ Custom payloads filled (or leave blank to use defaults)
✅ Your alert uses Order fills only + {{strategy.order.alert_message}}
バンドとチャネル
rsi jokerعندنا رسم بياني (شارت) على منصة TradingView.
واضح أنه شارت زمني قصير (ممكن M5 أو M15).
مرسوم عليه مستويات HH (Higher High), LL (Lower Low), HL (Higher Low), LH (Lower High).
الاتجاه الحالي:
من الرسم نلاحظ أن السعر عمل HH (قمة جديدة أعلى) ثم بعدها هبط بقوة وسجل LL (قاع جديد أقل).
بعد الـ LL، بدأ السعر يصعد لكن سجل LH (قمة أقل من السابقة)، مما يعني أن الاتجاه على المدى القريب يميل للهبوط (ترند هابط).
الخطوط المرسومة:
الخط الأحمر العلوي يمثل ترند هابط يربط القمم (مقاومة مائلة).
الخطوط الخضراء في الأسفل تمثل قناة سعرية هابطة أو دعم مائل.
الخط الأصفر يمثل خط اتجاه ثانوي/ضعيف داخل الترند.
المناطق المهمة:
المنطقة الحمراء بالأعلى: منطقة مقاومة قوية (إمداد/Supply Zone).
المنطقة الخضراء بالأسفل: منطقة دعم (طلب/Demand Zone).
الوضع الحالي للسعر:
السعر ارتد من الدعم (LL) وطلع لمستوى الترند الأحمر.
الآن يختبر المقاومة المائلة، ولو كسرها مع ثبات أعلى ممكن نشوف صعود للتجربة على المنطقة الحمراء.
لكن لو فشل بالكسر (رفض عند الترند)، ممكن يرجع للهبوط ويعيد اختبار المنطقة الخضراء.
📌 السيناريوهات المتوقعة:
صعود مشروط: إذا كسر الترند الأحمر + ثبات بشمعة واضحة → أهدافه المنطقة الحمراء (منطقة العرض).
هبوط مرجح: إذا فشل بالكسر → يرجع يعيد اختبار القاع السابق (LL) أو يكمل ضمن القناة الهابطة.
تحليل مختصر:
الاتجاه العام قصير المدى هابط، وأي صعود حالياً يعتبر تصحيح ما لم يكسر الترند العلوي والمنطقة الحمراء بثبات. Alright ✅ Let’s break this chart down in English:
General Structure:
This is a chart from TradingView on a short timeframe (likely M5 or M15).
It shows marked levels: HH (Higher High), LL (Lower Low), HL (Higher Low), LH (Lower High).
Trend Analysis:
Price created a Higher High (HH) but then dropped sharply to form a Lower Low (LL).
After the LL, price bounced but only managed to form a Lower High (LH) → this indicates a downtrend (bearish structure).
Drawn Lines:
Red descending line: main downtrend resistance (connecting lower highs).
Green lines below: channel support (downward sloping support zone).
Yellow line: minor/secondary trendline inside the main structure.
Key Zones:
Red zone (top): strong supply/resistance area.
Green zone (bottom): demand/support area.
Current Price Action:
Price bounced from the LL (support) and is now testing the red trendline (resistance).
If price breaks above and holds, it could push toward the red supply zone.
If price fails to break, it will likely drop back down, retesting the LL or sliding further inside the bearish channel.
📌 Scenarios:
Bullish case: Break + hold above the red trendline → target = red supply zone.
Bearish case (more likely): Rejection at the trendline → continuation downward to test LL or lower channel support.
🔎 Summary:
The short-term structure is bearish. Any upside move is just a correction unless price breaks above the trendline and supply zone.
ARB Close Lines —18:45→19:05 his indicator plots exactly two horizontal lines per day:
Start line at the close of the 18:45 IST candle.
End line at the close of the 19:05 IST candle.
Both lines automatically extend to 23:30 IST (default, fully editable).
Features
Adjustable Start / End time (hour + minute, default 18:45 → 19:05).
Adjustable extension time (default 23:30).
Keeps the last N days of lines (default 100).
Works on intraday timeframes (1m–60m).
Clean: always exactly two lines per day.
Usage
Helps track short intraday windows (e.g., 20-minute ORB around 18:45–19:05 IST) for evening breakout/trap setups. Ideal for gold, Bitcoin, or other 24/7 instruments.
ARB Close Lines — 2 Lines/Day (v6, single-line)This indicator plots exactly two horizontal lines per day:
Start line at the close of the Start candle (default 18:00 IST).
End line at the close of the End candle (default 19:00 IST).
Both lines automatically extend until 23:30 IST (editable).
Features
Adjustable Start/End time (hour + minute, in IST or any timezone you choose).
Adjustable extension time (default 23:30).
Keeps the last N days of lines (default 100).
Works on intraday charts (1–60m).
ARB 18:00–19:00 IST — Anchored 3h Lines (v6, multi-day)Draws a simple Opening Range for 24/7 markets using a custom time window. By default it captures the high and low formed between 18:00 and 19:00 IST each day, then locks those levels at 19:00 and extends two horizontal lines to the right. No alerts, no signals—pure levels so you can track breakouts or traps manually.
ARB 18:00–19:00 IST — Lines Only (v6, multi-day)Draws a simple Opening Range for 24/7 markets using a custom time window. By default it captures the high and low formed between 18:00 and 19:00 IST each day, then locks those levels at 19:00 and extends two horizontal lines to the right. No alerts, no signals—pure levels so you can track breakouts or traps manually.
ARB 18:00–19:00 IST — Lines Only (v6)Draws a simple Opening Range for 24/7 markets using a custom time window. By default it captures the high and low formed between 18:00 and 19:00 IST each day, then locks those levels at 19:00 and extends two horizontal lines to the right. No alerts, no signals—pure levels so you can track breakouts or traps manually.
How it works
Uses a session in your chosen Timezone (default: Asia/Kolkata) to detect the 18:00–19:00 window.
Continuously updates the range during the window.
At 19:00 IST the range is “locked” and two lines (Range High/Range Low) are drawn and extended right.
Old lines are cleared so only the latest day’s ORB remains.
Inputs
Timezone (IANA): e.g., Asia/Kolkata, Asia/Dubai, UTC.
Start Hour / End Hour: default 18 → 19 (1-hour window). End must be after Start.
Line Width / Colors for High & Low.
Best used on
Intraday timeframes (1–60m).
24/7 symbols like BTCUSD, XAUUSD, major crypto pairs, spot gold.
Works regardless of your broker’s server timezone because the script uses the selected IANA timezone.
Notes
This is levels only: no alerts, no entries/exits, no statistics.
If you reload the chart after the window, lines persist and stay synced to the locked values.
Change the timezone if you want to anchor the window to a different locale.
Version: 1.0 (Pine v6).
Bands PRO++ Full//@version=5
indicator('Faytterro Bands PRO++ Full', overlay=true, max_lines_count=500, max_bars_back=500)
// ==== Inputlar ====
src = input(hlc3, title='Kaynak')
len = input.int(50, title='Bant Uzunluğu', minval=10, maxval=500)
mult = input.float(2.0, minval=0.1, maxval=50, title='StdDev Çarpanı')
atrLen = input.int(14, title='ATR Uzunluğu')
emaLen = input.int(200, title='Trend EMA Uzunluğu')
// Bant Renkleri
cu = input.color(color.rgb(255,50,50), 'Üst Bant Rengi')
cl = input.color(color.rgb(50,200,50), 'Alt Bant Rengi')
// ==== Orta Hat ve Bantlar ====
basis = ta.wma(src, len)
dev = mult * ta.stdev(src, len)
atr = ta.atr(atrLen)
upper = basis + dev + atr*0.2
lower = basis - dev - atr*0.2
plot(basis, color=color.yellow, linewidth=1)
p1 = plot(upper, color=cu, linewidth=2, title='Üst Bant')
p2 = plot(lower, color=cl, linewidth=2, title='Alt Bant')
fill(p1, p2, color=color.new(color.blue,85))
// ==== Trend filtresi (EMA200) ====
emaTrend = ta.ema(close, emaLen)
isUpTrend = close > emaTrend
isDownTrend = close < emaTrend
plot(emaTrend, color=color.new(color.orange,40), linewidth=1, title='EMA Trend Çizgisi')
// ==== Arka Plan ====
bgcolor(isUpTrend ? color.new(color.green,70) : na)
bgcolor(isDownTrend ? color.new(color.red,70) : na)
// ==== Hacim filtresi ====
volAvg = ta.sma(volume, 20)
volFilter = volume > volAvg
// ==== Sinyaller ====
longCond = ta.crossover(close, lower) and isUpTrend and volFilter
shortCond = ta.crossunder(close, upper) and isDownTrend and volFilter
plotshape(longCond, title='Long', location=location.belowbar, color=color.green, style=shape.triangleup, size=size.normal, text='LONG')
plotshape(shortCond, title='Short', location=location.abovebar, color=color.red, style=shape.triangledown, size=size.normal, text='SHORT')
// ==== Alt / Üst Band Dokunuşları ====
touchLower = ta.crossover(close, lower)
plotshape(touchLower, title='Alt Band Dokunuş', style=shape.circle, color=color.new(color.green,0), size=size.tiny, location=location.belowbar)
touchUpper = ta.crossunder(close, upper)
plotshape(touchUpper, title='Üst Band Dokunuş', style=shape.circle, color=color.new(color.red,0), size=size.tiny, location=location.abovebar)
// ==== Alarm Koşulları ====
alertcondition(longCond, title='Long Sinyali', message='Faytterro Bands PRO++ Full: Long sinyali!')
alertcondition(shortCond, title='Short Sinyali', message='Faytterro Bands PRO++ Full: Short sinyali!')
alertcondition(touchLower, title='Alt Band Dokunuş', message='Faytterro Bands PRO++ Full: Alt banda dokunuldu!')
alertcondition(touchUpper, title='Üst Band Dokunuş', message='Faytterro Bands PRO++ Full: Üst banda dokunuldu!')
Liquidity Pulse Revealer (LPR) — by Qabas_algoLiquidity Pulse Revealer (LPR) — by Qabas_algo
The Liquidity Pulse Revealer (LPR) is a technical framework designed to uncover hidden phases of institutional activity by combining volatility (ATR Z-Score) and liquidity (Volume Z-Score) into a dual-condition detection model. Instead of relying on price action alone, LPR measures how volatility and traded volume behave relative to their historical distributions, revealing when the market is either “compressed” or “expanding with force.”
⸻
🔹 Core Mechanics
1. ATR Z-Score (Volatility Normalization)
• LPR calculates the Average True Range (ATR) on a higher timeframe (HTF).
• It applies a Z-Score transformation across a configurable lookback period to determine if volatility is statistically compressed (below mean) or expanded (above mean).
2. Volume Z-Score (Liquidity Normalization)
• Simultaneously, traded volume is normalized using the same Z-Score method.
• Elevated Volume Z-Scores signal the presence of institutional activity (accumulation/distribution or aggressive breakout participation).
3. Dual Conditions → Regimes
• 🧊 Iceberg Volume = Low ATR Z-Score + High Volume Z-Score.
→ Indicates a “hidden liquidity build-up” phase where price compresses but big players are positioning.
• ⚡ Revealed Momentum = High ATR Z-Score + High Volume Z-Score.
→ Marks explosive volatility phases where institutional activity is fully expressed in directional moves.
⸻
🔹 Visualization
• Iceberg Zones (blue shaded boxes):
Drawn automatically around periods of statistical compression + elevated volume. These zones act as launchpads; once broken, they often precede strong directional expansions.
• Revealed Zones (green shaded boxes):
Highlight expansionary phases with both volatility and volume spiking. They often align with trend acceleration or terminal exhaustion zones.
• Midline Tracking:
Each zone maintains a dynamic average (mid-price), updated as the session evolves, providing reference for breakout confirmation and invalidation levels.
⸻
🔹 Practical Use Cases
• Accumulation/Distribution Detection:
Spot where “smart money” is quietly building or unloading positions before large moves.
• Breakout Confirmation:
A breakout occurring after an Iceberg zone carries higher conviction than random volatility.
• Profit Management:
If a Revealed Momentum zone appears after a strong uptrend, it often signals distribution or exhaustion — useful for partial profit taking.
• Multi-Timeframe Adaptability:
With Auto, Multiplier, and Manual higher-timeframe modes, LPR adapts seamlessly to intraday scalping or swing trading contexts.
⸻
🔹 Alerts
• Instant alerts for the start of new Iceberg or Revealed zones.
• Optional alerts for breakouts above/below the last Iceberg zone boundaries.
⸻
🔹 Example Trading Scenario
1. Detection: An 🧊 Iceberg Volume zone forms around support (low volatility + high volume).
2. Trigger: Price closes above the upper boundary of this Iceberg zone.
3. Entry: Go long on the breakout.
4. Stop Loss: Place stop just below the Iceberg zone’s low (where the liquidity build-up started).
5. Target: Hold until a ⚡ Revealed Momentum zone forms — then start scaling out as the expansion matures.
This simple framework transforms hidden institutional behavior into actionable trade setups with clear risk management.
⸻
⚠️ Disclaimer: The LPR is a research and educational tool. It does not provide financial advice. Always apply proper risk management and use in combination with your own trading framework.
ICT KEY LEVELS (L3J)📊 Overview
The ICT KEY LEVELS (L3J) indicator is a tool designed to automatically identify and display key levels based on Inner Circle Trader (ICT) concepts.
This indicator combines session-based levels with multi-timeframe highs/lows analysis to provide traders with critical price zones for decision-making.
Developed by L3J - This indicator can be used in conjunction with other indicators I have developed for enhanced market analysis.
🎯 Key Features
Session-Based Levels
- Previous Day High/Low (PDH/PDL): Automatically identifies and displays the previous trading day's high and low levels
- Asian Session Levels: Tracks high and low during Asian trading hours (20:00-03:00 GMT+4)
- European Session Levels: Captures London session high and low levels (03:00-08:30 GMT+4)
Multi-Timeframe Analysis
- H1 Pivot Levels: Identifies 2-candle reversal patterns on 1-hour timeframe
- H4 Pivot Levels: Detects 4-hour pivot points using advanced pattern recognition
- Smart Visibility: Levels are only shown on appropriate timeframes (H1 levels on H1, H4 levels on H4)
Advanced Features
- Priority System: Automatically hides overlapping levels based on importance (Previous Day > Sessions > H4 > H1)
- Dynamic Labels: Real-time labels that update with price action
- Intelligent Cleanup: Removes crossed or outdated levels to maintain chart clarity
- Customizable Anchoring: Choose between precise timestamp anchoring or candle middle anchoring
- Performance Optimized: Built with efficient code structure for smooth chart performance
⚙️ Configuration Options
Note: Currently, the user interface settings are displayed in French. This will be updated to English in a future version.
General Settings
- Timezone: Configurable timezone for session calculations (default: GMT+4)
- Trading Days: Number of trading days to analyze (1-20 days)
- Extension: Right extension length for level lines
- Anchoring Mode: Precise timestamp or candle middle anchoring
Visual Customization
Each level type (Asia, Europe, Previous Day, H1, H4) includes:
- Color Selection: Separate colors for highs and lows
- Line Styles: Solid, Dotted, or Dashed lines
- Line Width: Adjustable thickness (1-4 pixels)
- Show/Hide Toggle: Individual control for each level type
🕒 Session Times
- Trading Day: 18:00-16:00 (CME session)
- Asian Session: 20:00-03:00 GMT+4
- European Session: 03:00-08:30 GMT+4
All times are configurable and timezone-aware
📈 How It Works
Level Detection
1. Session Levels: Continuously tracks price action during specific trading sessions
2. Pivot Detection: Uses 2-candle reversal patterns (bullish then bearish for highs, bearish then bullish for lows)
3. Multi-Timeframe Data: Requests higher timeframe data for H1 and H4 analysis
Smart Management
- Automatic Cleanup: Removes levels that have been crossed or are too old
- Priority Filtering: Hides duplicate levels based on importance hierarchy
- Dynamic Updates: Real-time adjustment of level positions and labels
🎨 Visual Elements
- Horizontal Lines: Extend from level creation point to the right
- Dynamic Labels: Show level type and session information
- Color Coding: Different colors for each session and timeframe
- Transparency: Automatically hides overlapping or less important levels
🔧 Technical Specifications
- Pine Script Version: v6
- Chart Overlay: True
- Max Lines: 500
- Max Labels: 50
- Performance: Optimized with intelligent memory management
📋 Usage Tips
1. Best Timeframe: Works on all timeframes, but H1 and lower provide optimal detail
2. Combine with Price Action: Use levels as confluence zones for entry/exit decisions
3. Risk Management: Levels can serve as stop-loss and take-profit targets
4. Market Structure: Helps identify key support/resistance in market structure analysis
🔄 Compatibility
This indicator is designed to work alongside other L3J indicators for comprehensive market analysis.
📞 Support & Updates
For questions, suggestions, or updates, please contact L3J through TradingView messaging.
---
Disclaimer : This indicator is for educational and analysis purposes. Always practice proper risk management and never risk more than you can afford to lose.
Version: 1.0
Author: L3J
Last Updated: 30/08/2025
Date Range Performance
Calculates total change and percentage change between two dates.
Computes average change per bar and per day.
Offers arithmetic and geometric daily %.
Supports auto mode (last N trading days) and manual date range.
Displays results as a watermark on the chart.
EMA Percentile Rank [SS]Hello!
Excited to release my EMA percentile Rank indicator!
What this indicator does
Plots an EMA and colors it by short-term trend.
When price crosses the EMA (up or down) and remains on that side for three subsequent bars, the cross is “confirmed.”
At the moment of the most recent cross, it anchors a reference price to the crossover point to ensure static price targets.
It measures the historical distance between price and the EMA over a lookback window, separately for bars above and below the EMA.
It computes percentile distances (25%, 50%, 85%, 95%, 99%) and draws target bands above/below the anchor.
Essentially what this indicator does, is it converts the raw “distance from EMA” behavior into probabilistic bands and historical hit rates you can use for targets, stop placement, or mean-reversion/continuation decisions.
Indicator Inputs
EMA length: Default is 21 but you can use any EMA you prefer.
Lookback: Default window is 500, this is length that the percentiles are calculated. You can increase or decrease it according to your preference and performance.
Show Accumulation Table: This allows you to see the table that shows the hits/price accumulation of each of the percentile ranges. UCL means upper confidence and LCL means lower confidence (so upper and lower targets).
About Percentiles
A percentile is a way of expressing the position of a value within a dataset relative to all the other values.
It tells you what percentage of the data points fall at or below that value.
For example:
The 25th percentile means 25% of the values are less than or equal to it.
The 50th percentile (also called the median) means half the values are below it and half are above.
The 99th percentile means only 1% of the values are higher.
Percentiles are useful because they turn raw measurements into context — showing how “extreme” or “typical” a value is compared to historical behavior.
In the EMA Percentile Rank indicator, this concept is applied to the distance between price and the EMA. By calculating percentile distances, the script can mark levels that have historically been reached often (low percentiles) or rarely (high percentiles), helping traders gauge whether current price action is stretched or within normal bounds.
Use Cases
The EMA Percentile Rank indicator is best suited for traders who want to quantify how far price has historically moved away from its EMA and use that context to guide decision-making.
One strong use case is target setting after trend shifts: when a confirmed crossover occurs, the percentile bands (25%, 50%, 85%, 95%, 99%) provide statistically grounded levels for scaling out profits or placing stops, based on how often price has historically reached those distances. This makes it valuable for traders who prefer data-driven risk/reward planning instead of arbitrary point targets. Another use case is identifying stretched conditions — if price rapidly tags the 95% or 99% band after a cross, that’s an unusually large move relative to history, which could signal exhaustion and prompt mean-reversion trades or protective actions.
Conversely, if the accumulation table shows price frequently resides in upper bands after bullish crosses, traders may anticipate continuation and hold positions longer . The indicator is also effective as a trend filter when combined with its EMA color-coding : only taking trades in the trend’s direction and using the bands as dynamic profit zones.
Additionally, it can support multi-timeframe confluence (if you align your chart to the timeframes of interest), where higher-timeframe trend direction aligns with lower-timeframe percentile behavior for higher-probability setups. Swing traders can use it to frame pullbacks — entering near lower percentile bands during an uptrend — while intraday traders might use it to fade extremes or ride breakouts past the median band. Because the anchor price resets only on EMA crosses, the indicator preserves a consistent reference for ongoing trades, which is especially helpful for managing swing positions through noise .
Overall, its strength lies in transforming raw EMA distance data into actionable, probability-weighted levels that adapt to the instrument’s own volatility and tendencies .
Summary
This indicator transforms a simple EMA into a distribution-aware framework: it learns how far price tends to travel relative to the EMA on either side, and turns those excursions into percentile bands and historical hit rates anchored to the most recent cross. That makes it a flexible tool for targets, stops, and regime filtering, and a transparent way to reason about “how stretched is stretched?”—with context from your chosen market and timeframe.
I hope you all enjoy!
And as always, safe trades!
Advanced Crypto Trading Dashboard📊 Advanced Crypto Trading Dashboard
🎯 FULL DESCRIPTION FOR TRADINGVIEW POST:
🚀 WHAT IS THIS DASHBOARD?
This is an advanced multi-timeframe technical analysis dashboard designed specifically for cryptocurrency trading. Unlike basic indicators, this script combines 8 essential metrics into a single visual table, providing a 360º market overview across 4 simultaneous timeframes.
📈 ANALYZED TIMEFRAMES:
- 15M: For scalping and precise entries
- 1H: For short-term swing trades
- 4H: For intermediate analysis and confirmations
- 1D: For macro view and main trend
🎯 ADVANCED METRICS EXPLAINED:
1. 📊 MOMENTUM
- Calculation: Combines RSI (40%) + MACD (30%) + Volume (30%)
- Ratings: Bullish | Neutral ↗ | Neutral ↘ | Bearish
- Use: Identifies the strength of the current movement
2. 📈 TREND
- Calculation: Alignment of EMAs (8, 21, 55) + ADX for strength
- Signals: Strong ↗ | Strong ↘ | Trending | Ranging
- Use: Confirms trend direction and intensity
3. 💰 MONEY FLOW
- Calculation: Money Flow Index (MFI) - advanced RSI with volume
- States: Bullish | Bearish | Overbought | Oversold
- Use: Detects real buying/selling pressure (not just candle color)
4. 🎯 RSI
- Calculation: Traditional 14-period RSI
- Zones: > 70 (Overbought) | < 30 (Oversold) | Neutral
- Use: Identifies price extremes and opportunities
5. ⚡ VOLATILITY
- Calculation: ATR in percentage + state classification
- States: High | Medium | Low + exact %
- Use: Assesses risk and movement potential
6. 🔔 BB SIGNAL
- Calculation: Price position in Bollinger Bands
- Signals: Overbought | Oversold | Neutral
- Use: Confirms extremes and reversal points
7. 🎲 SCORE
- Calculation: Composite score from 0-100 based on all indicators
- Colors: Green (>75) | Yellow (40-75) | Red (<40)
- Use: Quick overall assessment of asset strength
🎨 VISUAL FEATURES:
🌈 SMART COLOR SYSTEM:
- Green: Bullish signals/buy opportunities
- Red: Bearish signals/sell opportunities
- Yellow: Neutral zones/wait for confirmation
- Blue: Neutral technical information
📍 FULL CUSTOMIZATION:
- Position: Left | Center | Right
- Size: Small | Normal | Large
- Emojis: On/Off for professional settings
- Parameters: All periods adjustable
📋 HOW TO INTERPRET:
✅ STRONG BUY SIGNAL:
- Momentum: Bullish
- Trend: Strong ↗
- Money Flow: Bullish
- RSI: 30-70 (healthy zone)
- Score: >60
❌ STRONG SELL SIGNAL:
- Momentum: Bearish
- Trend: Strong ↘
- Money Flow: Bearish
- RSI: >70 or <30 (extremes)
- Score: <40
⚠️ CAUTION ZONE:
- Conflicting signals across timeframes
- Money Flow vs. Trend divergence
- RSI at extremes with average Score
💡 USAGE STRATEGIES:
🎯 SCALPING (15M-1H):
- Check alignment between 15M and 1H
- Enter when both show the same signal
- Use Stop Loss based on volatility
📈 SWING TRADING (1H-4H):
- Confirm trend on 4H
- Enter on pullbacks in 1H
- Target based on overall Score
🏦 POSITION TRADING (4H-1D):
- Focus on 1D analysis
- Use 4H for entry timing
- Hold position until Score reverses
🔧 RECOMMENDED SETTINGS:
👨💼 FOR PROFESSIONAL TRADERS:
- Position: Center
- Size: Normal
- Emojis: Off
- Chart Timeframe: 1H
🎮 FOR BEGINNERS:
- Position: Right
- Size: Large
- Emojis: On
- Chart Timeframe: 4H
⚡ ADVANTAGES OVER OTHER DASHBOARDS:
✅ Precise Calculations: Real MFI vs. "fake buyer volume"
✅ Multi-Timeframe: 4 simultaneous analyses
✅ Composite Score: Overall view in one number
✅ Intuitive Visuals: Clear colors and symbols
✅ Fully Customizable: Adapts to any setup
✅ Zero Repaint: Reliable and stable data
✅ Optimized Performance: Doesn’t lag the chart
🎓 PRACTICAL EXAMPLE:
Asset: BTCUSDT | Timeframe: 1H
| TF | Momentum | Trend | Money Flow | RSI | Score |
|------|----------|------------|------------|-----|-------|
| 15M | Bullish | Strong ↗ | Bullish | 65 | 78 |
| 1H | Neutral↗ | Strong ↗ | Bullish | 58 | 68 |
| 4H | Neutral↘ | Trending | Bearish | 45 | 52 |
| 1D | Bearish | Strong ↘ | Bearish | 35 | 32 |
📊 Interpretation:
- Short-term: Bullish (15M-1H aligned)
- Mid-term: Conflict (4H neutral)
- Long-term: Bearish (1D negative)
- Strategy: Short-term bullish trade with tight stop
🚨 IMPORTANT NOTES:
- This indicator is a support tool, not an automated system
- Always combine with traditional chart analysis
- Test in paper trading before using real money
- Always manage risk with appropriate stop loss
- Not a holy grail - no indicator is 100% accurate
📞 SUPPORT AND FEEDBACK:
Leave your rating and comments! Your feedback helps continuously improve this tool.
Ripster EMA Clouds with customisable colorsEMA Clouds indicator inspired by Ripster47's concepts. Published primarily to offer customizable color settings for the cloud displays. This is not an identical copy but an inspired implementation.
Bull/Bear Lower Volume (vijayachandru)Bull/Bear Lower Volume (HA + Box + ±15 Lines)
This indicator tracks intraday Heikin Ashi candles and highlights the lowest-volume bull/bear candles after 9:25 (IST). When price breaks above/below these candles, a breakout box is drawn with optional ±15 point dashed levels. It plots clear Buy/Sell signals, marks box breakouts, and provides alert conditions for all setups—helping traders spot early intraday breakouts driven by volume shifts
Hoàng già — Hoàng giàSimplify it based on the structure of the frame price
Simplify it based on the structure of the frame price
Simplify it based on the structure of the frame price
Simplify it based on the structure of the frame price
Simplify it based on the structure of the frame price
Simplify it based on the structure of the frame price
Simplify it based on the structure of the frame price
Simplify it based on the structure of the frame price
Simplify it based on the structure of the frame price
Simplify it based on the structure of the frame price
Simplify it based on the structure of the frame price
Simplify it based on the structure of the frame price
Simplify it based on the structure of the frame price
THE BATATAH SAUCE BTC.PERP TRADING STRAT12hr hour is the sweet spot
great profit factor
decent risk management avg losing (back tested for 5 yrs and does alright till even 2018)trade 8.21% vs avg winning 174.87% (back tested for 5 yrs and does alright since even start2018)
Its alright on daily as well as 6hr but lower just gets more noisy
Pump/Dump Detector [Modular]//@version=5
indicator("Pump/Dump Detector ", overlay=true)
// ————— Inputs —————
risk_pct = input.float(1.0, "Risk %", minval=0.1)
capital = input.float(100000, "Capital")
stop_multiplier = input.float(1.5, "Stop Multiplier")
target_multiplier = input.float(2.0, "Target Multiplier")
volume_mult = input.float(2.0, "Volume Spike Multiplier")
rsi_low_thresh = input.int(15, "RSI Oversold Threshold")
rsi_high_thresh = input.int(85, "RSI Overbought Threshold")
rsi_len = input.int(2, "RSI Length")
bb_len = input.int(20, "BB Length")
bb_mult = input.float(2.0, "BB Multiplier")
atr_len = input.int(14, "ATR Length")
show_signals = input.bool(true, "Show Entry Signals")
use_orderflow = input.bool(true, "Use Order Flow Proxy")
use_ml_flag = input.bool(false, "Use ML Risk Flag")
use_session_filter = input.bool(true, "Use Volatility Sessions")
// ————— Symbol Filter (Optional) —————
symbol_nq = input.bool(true, "Enable NQ")
symbol_es = input.bool(true, "Enable ES")
symbol_gold = input.bool(true, "Enable Gold")
is_nq = str.contains(syminfo.ticker, "NQ")
is_es = str.contains(syminfo.ticker, "ES")
is_gold = str.contains(syminfo.ticker, "GC")
symbol_filter = (symbol_nq and is_nq) or (symbol_es and is_es) or (symbol_gold and is_gold)
// ————— Calculations —————
rsi = ta.rsi(close, rsi_len)
atr = ta.atr(atr_len)
basis = ta.sma(close, bb_len)
dev = bb_mult * ta.stdev(close, bb_len)
bb_upper = basis + dev
bb_lower = basis - dev
rolling_vol = ta.sma(volume, 20)
vol_spike = volume > volume_mult * rolling_vol
// ————— Session Filter (EST) —————
est_offset = -5
est_hour = (hour + est_offset + 24) % 24
session_filter = (est_hour >= 18 or est_hour < 6) or (est_hour >= 14 and est_hour < 17)
session_ok = not use_session_filter or session_filter
// ————— Order Flow Proxy —————
mfi = ta.mfi(close, 14)
buy_imbalance = ta.crossover(mfi, 50)
sell_imbalance = ta.crossunder(mfi, 50)
reversal_candle = close > open and close > ta.highest(close , 3)
// ————— ML Risk Flag (Placeholder) —————
ml_risk_flag = use_ml_flag and (ta.sma(close, 5) > ta.sma(close, 20))
// ————— Entry Conditions —————
long_cond = symbol_filter and session_ok and vol_spike and rsi < rsi_low_thresh and close < bb_lower and (not use_orderflow or (buy_imbalance and reversal_candle)) and (not use_ml_flag or ml_risk_flag)
short_cond = symbol_filter and session_ok and vol_spike and rsi > rsi_high_thresh and (not use_orderflow or sell_imbalance) and (not use_ml_flag or ml_risk_flag)
// ————— Position Sizing —————
risk_amt = capital * (risk_pct / 100)
position_size = risk_amt / atr
// ————— Plot Signals —————
plotshape(show_signals and long_cond, title="Long Signal", location=location.belowbar, color=color.green, style=shape.triangleup, size=size.small)
plotshape(show_signals and short_cond, title="Short Signal", location=location.abovebar, color=color.red, style=shape.triangledown, size=size.small)
// ————— Alerts —————
alertcondition(long_cond, title="Long Entry Alert", message="Pump fade detected: Long setup triggered")
alertcondition(short_cond, title="Short Entry Alert", message="Dump detected: Short setup triggered")
Auto S/R 1H - Stable Simplethat is a script to find out the support and resistance as trendlines for stocks in one hour timeframe for swing trading.
LUCEO Monday Range V3LUCEO Monday Range 지표는 매주 월요일의 고점(Monday High), 저점(Monday Low), 균형값(Equilibrium)을 자동으로 표시해 주는 도구입니다.
ICT, 런던 브레이크아웃 등 월요일 범위를 기준으로 삼는 전략에 적합하며, 과거 데이터를 통해 이전 여러 주 월요일 범위를 시각화할 수 있습니다.
기능 요약:
월요일 고점(MH), 저점(ML), 균형가(EQ) 자동 표시
최대 52주까지 과거 월요일 범위 표시 가능
각 레벨 터치 시 알림 기능 지원
라벨/라인 색상, 스타일, 크기 사용자 지정 가능
주간/월간 차트에서는 자동으로 표시 비활성화
활용 예시:
월요일 고점을 상향 돌파하는 돌파 전략 분석
주간 유동성 중심 레벨인 EQ를 기준으로 방향성 판단
주요 반전 구간 탐지에 사용
---------------------------------------------------------------------------------------------------------
Monday Range (Lines) indicator automatically displays each Monday’s High (MH), Low (ML), and Equilibrium (EQ) levels on the chart.
It is useful for ICT-based setups, London breakout strategies, or any system that relies on weekly liquidity levels. The indicator supports visualization of up to 52 past Mondays.
Key Features:
Automatic plotting of Monday High, Low, and Equilibrium
Displays Monday ranges from multiple past weeks
Real-time alerts when price touches MH, ML, or EQ
Customizable line and label styles, colors, and sizes
Automatically disables display on weekly and monthly charts
Use Cases:
Validate London session breakout with Monday High breakout
Use EQ as a liquidity balance reference
Identify key reversal zones using weekly range extremes
HawkEye EMA Cloud
# HawkEye EMA Cloud - Enhanced Multi-Timeframe EMA Analysis
## Overview
The HawkEye EMA Cloud is an advanced technical analysis indicator that visualizes multiple Exponential Moving Average (EMA) relationships through dynamic color-coded cloud formations. This enhanced version builds upon the original Ripster EMA Clouds concept with full customization capabilities.
## Credits
**Original Author:** Ripster47 (Ripster EMA Clouds)
**Enhanced Version:** HawkEye EMA Cloud with advanced customization features
## Key Features
### 🎨 **Full Color Customization**
- Individual bullish and bearish colors for each of the 5 EMA clouds
- Customizable rising and falling colors for EMA lines
- Adjustable opacity levels (0-100%) for each cloud independently
### 📊 **Multi-Layer EMA Analysis**
- **5 Configurable EMA Cloud Pairs:**
- Cloud 1: 8/9 EMAs (default)
- Cloud 2: 5/12 EMAs (default)
- Cloud 3: 34/50 EMAs (default)
- Cloud 4: 72/89 EMAs (default)
- Cloud 5: 180/200 EMAs (default)
### ⚙️ **Advanced Customization Options**
- Toggle individual clouds on/off
- Adjustable EMA periods for all timeframes
- Optional EMA line display with color coding
- Leading period offset for cloud projection
- Choice between EMA and SMA calculations
- Configurable source data (HL2, Close, Open, etc.)
## How It Works
### Cloud Formation
Each cloud is formed by the area between two EMAs of different periods. The cloud color dynamically changes based on:
- **Bullish (Green/Custom):** When the shorter EMA is above the longer EMA
- **Bearish (Red/Custom):** When the shorter EMA is below the longer EMA
### Multiple Timeframe Analysis
The indicator provides a comprehensive view of trend strength across multiple timeframes:
- **Short-term:** Clouds 1-2 (faster EMAs)
- **Medium-term:** Cloud 3 (intermediate EMAs)
- **Long-term:** Clouds 4-5 (slower EMAs)
## Trading Applications
### Trend Identification
- **Strong Uptrend:** Multiple clouds stacked bullishly with price above
- **Strong Downtrend:** Multiple clouds stacked bearishly with price below
- **Consolidation:** Mixed cloud colors indicating sideways movement
### Entry Signals
- **Bullish Entry:** Price breaking above bearish clouds turning bullish
- **Bearish Entry:** Price breaking below bullish clouds turning bearish
- **Confluence:** Multiple cloud confirmations strengthen signal reliability
### Support/Resistance Levels
- Cloud boundaries often act as dynamic support and resistance
- Thicker clouds (higher opacity) may provide stronger S/R levels
- Multiple cloud intersections create significant price levels
## Customization Guide
### Color Schemes
Create your own visual style by customizing:
1. **Bullish/Bearish colors** for each cloud pair
2. **Rising/Falling colors** for EMA lines
3. **Opacity levels** to layer clouds effectively
### Recommended Settings
- **Day Trading:** Focus on Clouds 1-2 with higher opacity
- **Swing Trading:** Use Clouds 1-3 with moderate opacity
- **Position Trading:** Emphasize Clouds 3-5 with lower opacity
## Technical Specifications
- **Version:** Pine Script v6
- **Type:** Overlay indicator
- **Calculations:** Real-time EMA computations
- **Performance:** Optimized for all timeframes
- **Alerts:** Configurable long/short alerts available
## Risk Disclaimer
This indicator is for educational and informational purposes only. Always combine with proper risk management and additional analysis before making trading decisions. Past performance does not guarantee future results.
---
*Enhanced and customized version of the original Ripster EMA Clouds by Ripster47. This modification adds comprehensive color customization and enhanced user control while preserving the core analytical framework.*
Arena TP Manager//@version=5
indicator("Arena TP Manager", overlay=true, max_labels_count=500)
// === INPUTS ===
entryPrice = input.float(0.0, "Entry Price", step=0.1)
stopLossPerc = input.float(5.0, "Stop Loss %", step=0.1)
tp1Perc = input.float(10.0, "TP1 %", step=0.1)
tp2Perc = input.float(20.0, "TP2 %", step=0.1)
tp3Perc = input.float(30.0, "TP3 %", step=0.1)
// === CALCULATIONS ===
stopLoss = entryPrice * (1 - stopLossPerc/100)
tp1 = entryPrice * (1 + tp1Perc/100)
tp2 = entryPrice * (1 + tp2Perc/100)
tp3 = entryPrice * (1 + tp3Perc/100)
// === PLOTTING ===
plot(entryPrice > 0 ? entryPrice : na, title="Entry", color=color.yellow, linewidth=2, style=plot.style_linebr)
plot(entryPrice > 0 ? stopLoss : na, title="Stop Loss", color=color.red, linewidth=2, style=plot.style_linebr)
plot(entryPrice > 0 ? tp1 : na, title="TP1", color=color.green, linewidth=2, style=plot.style_linebr)
plot(entryPrice > 0 ? tp2 : na, title="TP2", color=color.green, linewidth=2, style=plot.style_linebr)
plot(entryPrice > 0 ? tp3 : na, title="TP3", color=color.green, linewidth=2, style=plot.style_linebr)
// === LABELS ===
if (entryPrice > 0)
label.new(bar_index, entryPrice, "ENTRY: " + str.tostring(entryPrice), style=label.style_label_up, color=color.yellow, textcolor=color.black)
label.new(bar_index, stopLoss, "SL: " + str.tostring(stopLoss), style=label.style_label_down, color=color.red, textcolor=color.white)
label.new(bar_index, tp1, "TP1: " + str.tostring(tp1), style=label.style_label_up, color=color.green, textcolor=color.white)
label.new(bar_index, tp2, "TP2: " + str.tostring(tp2), style=label.style_label_up, color=color.green, textcolor=color.white)
label.new(bar_index, tp3, "TP3: " + str.tostring(tp3), style=label.style_label_up, color=color.green, textcolor=color.white)
Energy Across TimePrivate Use-Only Version
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed euismod, lectus nec varius dictum, nibh arcu imperdiet augue, ac tristique odio nulla nec ligula. Vivamus ac odio nec lorem faucibus posuere. Proin sed sapien dignissim, laoreet velit vitae, vehicula justo. Curabitur et viverra lectus. Ut sit amet rhoncus ligula. Nullam nec posuere nisl. Morbi faucibus mattis sem, nec faucibus neque tristique vitae. Praesent malesuada nisl nec lectus congue, sit amet fringilla mauris vulputate. Ut quis felis vitae arcu varius ultrices non vel metus. Duis ac posuere nulla. Sed quis odio arcu. Etiam sodales eros libero, eget finibus elit bibendum nec. Cras ac justo sed justo facilisis suscipit. Nullam faucibus tortor vitae lorem eleifend, ut rhoncus lacus imperdiet.
Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia curae; Integer sagittis mi ut leo efficitur, vel feugiat nibh suscipit. Morbi sed vulputate risus, eu volutpat massa. Vestibulum luctus, nisl non posuere vehicula, enim urna bibendum est, sit amet luctus libero sapien a massa. Nullam blandit nulla non massa pretium, nec fermentum turpis vestibulum. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Nam condimentum congue feugiat. Donec commodo, libero nec congue finibus, augue mi malesuada mi, sed suscipit erat sem ut orci. Phasellus dictum justo at ligula tincidunt, nec dictum libero scelerisque. Nulla et faucibus nulla, id aliquet magna. Fusce congue, justo in luctus iaculis, lectus dolor ultrices nunc, nec euismod lectus lorem ac lectus.
Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Nam dictum sapien non mattis aliquet. Integer semper venenatis libero, sit amet posuere magna laoreet at. Aliquam erat volutpat. Aenean congue luctus felis, vel blandit velit posuere nec. Aenean feugiat, purus at vulputate posuere, ipsum nulla dignissim arcu, nec sollicitudin quam est sed purus. Aenean bibendum, ligula a luctus venenatis, erat nisl sagittis eros, id ultrices purus nibh ac nunc. Sed egestas sodales dui, vitae volutpat mauris facilisis vitae. Nam sit amet dolor ac lorem luctus luctus. Morbi iaculis fringilla bibendum. Mauris ut ullamcorper leo. Sed fringilla fermentum nunc, eget egestas orci porttitor a. Aenean sit amet mi ligula. Suspendisse sed efficitur odio. Quisque in turpis eget mauris ullamcorper faucibus. Sed euismod turpis ut arcu posuere tincidunt.
