始めましょう

"100万新币等于多少人民币"に関するスクリプトを検索

IKAKOver2（LITE雲なし） change point I tried to make the operation lighter by removing the display of the Ichimoku balance table. We have set a period such as EMA to use 5 minute bars and the first band is period 60 and 100 EMA . The color of the belt changes according to the position of the period 5EMA-25EMA-50EMA. The second sash is based on a 60- and 100-EMA period of 15 minutes. The change in the color of the obi is also a 15-minute specification. Since the above period can be changed, I think that there are customs such as 1 hour and 4 hours. Buying and selling signs are shown in green for buying and red for selling. (More frequent) For the time being, it is also possible to display the Ichimoku balance table. As for my usage method, when both the 15-minute and 5-minute bars have an uptrend (downtrend ), when each trading sign is confirmed, spread the limit just below the price. . (Because there is a commission in the market) If the color of the obi becomes yellow, the trend may be over, so wait for the signature to reach the bundle of 15 minutes instead of 5 minutes, and after the signature is confirmed, it is the same as 5 minutes. The loss cut line is often the latest low. Or when the obi is broken. . I am still studying about profitability. Sometimes we use indicators, sometimes we reach the target horizon. I think each way is good. It is a discretionary aid, and the head and tail are cut off, and the image is about 10 to 100 ＄.
Pine Script® インジケーター
nanja600の投稿
1
IKAKOver2change point Improve the accuracy of reverse sign Adding a signature using only RCI 変更点 逆張りのサインと順張りのサインを区別し、逆張りのサインは騙しができるだけ少なくなるように精度を上げました。 逆張りか順張りかは10emaと100emaの位置関係だけで区別しています。 また、RCIのみを利用した、レンジ相場用のサインを追加しました。 We have set a period such as EMA to use 5 minute bars and the first band is period 60 and 100 EMA . The color of the belt changes according to the position of the period 5EMA-25EMA-50EMA. The second sash is based on a 60- and 100-EMA period of 15 minutes. The change in the color of the obi is also a 15-minute specification. Since the above period can be changed, I think that there are customs such as 1 hour and 4 hours. Buying and selling signs are shown in green for buying and red for selling. (More frequent) For the time being, it is also possible to display the Ichimoku balance table. As for my usage method, when both the 15-minute and 5-minute bars have an uptrend (downtrend ), when each trading sign is confirmed, spread the limit just below the price. . (Because there is a commission in the market) If the color of the obi becomes yellow, the trend may be over, so wait for the signature to reach the bundle of 15 minutes instead of 5 minutes, and after the signature is confirmed, it is the same as 5 minutes. The loss cut line is often the latest low. Or when the obi is broken. . I am still studying about profitability. Sometimes we use indicators, sometimes we reach the target horizon. I think each way is good. It is a discretionary aid, and the head and tail are cut off, and the image is about 10 to 100 ＄.
Pine Script® インジケーター
nanja600の投稿
3
IKAKOWe have set a period such as EMA to use 5 minute bars and the first band is period 60 and 100 EMA. The color of the belt changes according to the position of the period 5EMA-25EMA-50EMA. The second sash is based on a 60- and 100-EMA period of 15 minutes. The change in the color of the obi is also a 15-minute specification. Since the above period can be changed, I think that there are customs such as 1 hour and 4 hours. Buying and selling signs are shown in green for buying and red for selling. (More frequent) For the time being, it is also possible to display the Ichimoku balance table. As for my usage method, when both the 15-minute and 5-minute bars have an uptrend (downtrend ), when each trading sign is confirmed, spread the limit just below the price. . (Because there is a commission in the market) If the color of the obi becomes yellow, the trend may be over, so wait for the signature to reach the bundle of 15 minutes instead of 5 minutes, and after the signature is confirmed, it is the same as 5 minutes. The loss cut line is often the latest low. Or when the obi is broken. . I am still studying about profitability. Sometimes we use indicators, sometimes we reach the target horizon. I think each way is good. It is a discretionary aid, and the head and tail are cut off, and the image is about 10 to 100 ＄.
Pine Script® インジケーター
nanja600の投稿
Point and Figure (PnF) ChartThis is live and non-repainting Point and Figure Charting tool. The tool has it’s own P&F engine and not using integrated function of Trading View. Point and Figure method is over 150 years old. It consist of columns that represent filtered price movements. Time is not a factor on P&F chart but as you can see with this script P&F chart created on time chart. P&F chart provide several advantages, some of them are filtering insignificant price movements and noise, focusing on important price movements and making support/resistance levels much easier to identify. If you are new to Point & Figure Chart then you better get some information about it before using this tool. There are very good web sites and books. Please PM me if you need help about resources. Options in the Script Box size is one of the most important part of Point and Figure Charting. Chart price movement sensitivity is determined by the Point and Figure scale. Large box sizes see little movement across a specific price region, small box sizes see greater price movement on P&F chart. There are four different box scaling with this tool: Traditional, Percentage, Dynamic (ATR), or User-Defined 4 different methods for Box size can be used in this tool. User Defined: The box size is set by user. A larger box size will result in more filtered price movements and fewer reversals. A smaller box size will result in less filtered price movements and more reversals. ATR: Box size is dynamically calculated by using ATR, default period is 20. Percentage: uses box sizes that are a fixed percentage of the stock's price. If percentage is 1 and stock’s price is $100 then box size will be $1 Traditional: uses a predefined table of price ranges to determine what the box size should be. Price Range Box Size Under 0.25 0.0625 0.25 to 1.00 0.125 1.00 to 5.00 0.25 5.00 to 20.00 0.50 20.00 to 100 1.0 100 to 200 2.0 200 to 500 4.0 500 to 1000 5.0 1000 to 25000 50.0 25000 and up 500.0 Default value is “ATR”, you may use one of these scaling method that suits your trading strategy. If ATR or Percentage is chosen then there is rounding algorithm according to mintick value of the security. For example if mintick value is 0.001 and box size (ATR/Percentage) is 0.00124 then box size becomes 0.001. And also while using dynamic box size (ATR or Percentage), box size changes only when closing price changed. Reversal : It is the number of boxes required to change from a column of Xs to a column of Os or from a column of Os to a column of Xs. Default value is 3 (most used). For example if you choose reversal = 2 then you get the chart similar to Renko chart. Source: Closing price or High-Low prices can be chosen as data source for P&F charting. Chart Style: There are 3 options for chart style: “Candle”, “Area” or “Don’t show”. As Area: As Candle: X/O Column Style: it can show all columns from opening price or only last Xs/Os. Color Theme: different themes exist => Green/Red, Yellow/Blue, White/Yellow, Orange/Blue, Lime/Red, Blue/Red Show Breakouts is the option to show Breakouts This tool detects & shows following Breakouts: Triple Top/Bottom, Triple Top Ascending, Triple Bottom Descending, Simple Buy/Sell (Double Top/Bottom), Simple Buy With Rising Bottom, Simple Sell With Declining Top Catapult bullish/bearish Show Horizontal Count Targets: Finds the congestion or consolidation pattern and if there is breakout then it calculates the Target by using Horizontal Count method (based on the width of congestion pattern). It shows how many column exist on congestion area. There is no guarantee that prices will reach the target. Show Vertical Count Targets: When Triple Top/Bottom Breakouts occured the script calculates the target by using Vertical Count Method (based on the length of the column). There is no guarantee that prices will reach the target. For both methods there is auto target cancellation if price goes below congestion bottom or above congestion top. trend is calculated by EMA of closing price of the P&F Whipsaw protection: Last options are “Show info panel” and Labeling Offset. Script shows current box size, reversal, and recommanded minimum and maximum box size. And also it shows the price level to reverse the column (Xs <-> Os) and the price level to add at least 1 more box to column. This is the option to put these labels 10, 20, 30, 50 or 100 bars away from the last bar. Labeling content and color change according to X/O column. do not hesitate to comment.
Pine Script® インジケーター
LonesomeTheBlueの投稿
65
Technical Analysis - Panel Info//A. Oscillators & B. Moving Averages base on TradingView's Technical Analysis by ThiagoSchmitz //C.Pivot base on Ultimate Pivot Points Alerts by elbartt //D. Summary & Panel info by anhnguyen14 Panel Info base on these indicators: A. Oscillators 1. Rsi (14) 2. Stochastic (14,3,3) 3. CCI (20) 4. ADX (14) 5. AO 6. Momentum (10) 7. MACD (12,26) 8. Stoch RSI (3,3,14,14) 9. %R (14) 10. Bull bear 11. UO (7,14,28) B. Moving Averages 1. SMA & EMA: 5-10-20-30-50-100-200 2. Ichimoku Cloud - Baseline (26) 3. Hull MA (9) C. Pivot 1. Traditional 2. Fibonacci 3. Woodie 4. Camarilla D. Summary Sum_red=A_red+B_red+C_red Sum_blue=A_blue+B_blue+C_blue sell_point=(Sum_red/32)*100 buy_point=(Sum_blue/32)*100 sell = Sum_red>Sum_blue and sell_point>50 Strong_sell = A_red>A_blue and B_red>B_blue and C_red>C_blue and sell_point>50 and not crossunder(sell_point,75) buy = Sum_red>Sum_blue and buy_point>50 Strong_buy = A_red50 and not crossunder(buy_point,75) neutral = not sell and not Strong_sell and not buy and not Strong_buy
Pine Script® インジケーター
inno14の投稿
7
CCI RiderThis is my thank you to the TradingView community, for the people who are sharing their scripts, which allowed me to learn Pine Script. So here is my first creation, feel free to experiment, modify and use it as you wish. It is a CCI(default value is 100, can be changed), combined with an EMA of that CCI(default 21,changeable) that then colors the background according to the strength of the signal(if selected to do so). To generate strong signals, it also uses Bollinger Bands to prevent whipsaws in high volatility situations. The best signals are generated when the CCI crosses the limits set by the user (default is 100/-100), and is above/belov its EMA. Exit signals are indicated, when the CCI crosses its EMA. Unfortunately in strong trends, this exit signal is sometimes premature, using a 3x resolution of the indicator will improve this, maybe I will implement this in a later version. I use it mostly in 15min charts and higher, I found in shorter timeframes still a lot of whipsaws, maybe experimenting with different lengths and levels will improve this. As the Indicator allows the user to experiment with different lenghts and levels, and the colors will change according the setting, I find it a nice tool to search for the best mixture for different securities and timeframes. See below an example of a nice signal. I do suggest to use it in combination with other indicators.
Pine Script® インジケーター
TradeSLの投稿
3
Yield Curve Version 2.55.2Welcome to Yield Curve Version 2.55.2 US10Y-US02Y * Please read description to help understand the information displayed. * NOTE - This script requires 1 real time update before accurate information is displayed, therefore WILL NOT display the correct information if the Bond Market is Closed over the Weekend. * NOTE - When values are changed Via Input setting they do take a bit to display based off all the information that is required to display this script. **FEATURES** * Input Features let you view the information the way YOU like via Input Settings * Displays Current Version Title - Toggleable On/Off via Input Settings - Default On * Plots the Yield Curve of the Bonds listed (Middle Green and Red Line) * Displays the Spread for each Bond (Top Green and Red Labels) - Toggleable On/Off via Input Settings - Change Size via Input Settings - Default On * Displays the current Yield for each Bond (Bottom Green and Red Labels) - Toggleable On/Off via Input Settings - Change Size via Input Settings - Default On - Large Size * Plots the Average of the Entire Yield Curve (BLUE Line within the Yield Curve) - Toggleable On/Off via Input Settings - Default On * Displays messages based off Yield Inversions (Orange Text) - Toggleable On/Off via Input Settings - Default On if Applicable * Displays 2 10 Inversion Warning Message (Orange Text) - Toggleable On/Off via Input Settings - Default On if Applicable * Plots Column Data at the Bottom that tries to help determine the Stability of the Yield Curve (More information Below about Stability) - Toggleable On/Off via Input Settings - Default On * Plots the 7,20 and 100 SMA of the STABILITY MAX OVERLOAD (More information Below about Stability Max Overload) - Toggleable On/Off via Input Settings - Default On for 100 SMA , 20 SMA and 7 SMA * Ability to Display Indicator Name and Value via Input Settings - Default On - Displays Stability Max Overload SMA Labels. Toggleable to Non SMA Values. See Below. **Bottom Columns are all about STABILITY** * I have tried to come up with an algorithm that helps understand the Stability of the Yield Curve. There are 3 Sections to the Bottom Columns. * Section 1 - STABILITY (Displayed as the lightest Green or Red Column) Values range from 0 to 1 where 1 equals the MOST UNSTABLE Curve and 0 equals the MOST STABLE Curve * Section 2 - STABILITY OVERLOAD (Displayed just above the Stability Column a shade darker Green or Red Column) * Section 3 - STABILITY MAX OVERLOAD (Displayed just above the Stability Overload Column a shade darker Green or Red Column) What this section tries to do is help understand the Stability of the Curve based on the inversions data. Lower values represent a MORE STABLE curve. If the Yield Curve currently has 0 Inversions all Stability factors should equal 0 and therefore not plot any lower columns. As the Yield Curve becomes more inverted each section represents a value based off that data. GREEN columns represent a MORE Stable Curve from the resolution prior and vise versa. (S SO SMO) STABILITY - tests the current Stability of the Curve itself again ranging from 0 to 1 where 0 equals the MOST Stable Curve and 1 equals the MOST Unstable Curve. STABILIY OVERLOAD - adds a value to STABLITY based off STABILITY itself. STABILITY MAX OVERLOAD - adds the Entire value to STABILITY derived again from STABILITY. This section also allows us to see the 7,20 and 100 SMA of the STABILITY MAX OVERLOAD which should always be the GREATEST of ALL STABILTY VALUES. *Indicator Labels How to use* Indicator Labels by default are turned On and will display Name and Value Labels for Stability Max Overload SMA values. To switch to (S SO SMO) Labels, toggle "Indicator Labels / SMO SMA Labels", via Input Settings. This button allows you to switch between the two Indicator Label Display options. You must have "Indicators" turned On to view the Labels and therefore is turned On by Default. To turn all of the Indicator Labels Off, simply disable "Indicators" via Input Settings. Remember - All information displayed can be tuned On or Off besides the Curve itself. There are also other Features Accessible Via the Input Settings. I will continue to update this script as there is more information I would like to gather and display! I hope you enjoy, OpptionsOnly
Pine Script® インジケーター
UnknownUnicorn5129145の投稿
2
Ultimate Moving Average Package (17 MA's)Included is the: VWAP Current time frame 10 EMA Current time frame 20 EMA Current time frame 50 EMA Current time frame 10 SMA Current time frame 20 SMA Current time frame 50 SMA Daily 10 EMA Daily 20 EMA Daily 50 EMA Daily 50 SMA Daily 100 SMA Daily 200 SMA Weekly 100 SMA Weekly 200 SMA Monthly 100 SMA Monthly 200 SMA All Daily/Weekly/Monthly MA's can be seen on intraday charts. Current time frame MA's change depending on your time frame. Obviously you dont need all 17 on your chart but you can pick the ones you like and disable the rest.
Pine Script® インジケーター
Craig_Stineの投稿
Bilateral Stochastic Oscillator - For The Sake Of EfficiencyIntroduction The stochastic oscillator is a feature scaling method commonly used in technical analysis, this method is the same as the running min-max normalization method except that the stochastic oscillator is in a range of (0,100) while min-max normalization is in a range of (0,1). The stochastic oscillator in itself is efficient since it tell's us when the price reached its highest/lowest or crossed this average, however there could be ways to further develop the stochastic oscillator, this is why i propose this new indicator that aim to show all the information a classical stochastic oscillator would give with some additional features. Min-Max Derivation The min-max normalization of the price is calculated as follow : (price - min)/(max - min) , this calculation is efficient but there is alternates forms such as : price - (max - min) - min/(max - min) This alternate form is the one i chosen to make the indicator except that both range (max - min) are smoothed with a simple moving average, there are also additional modifications that you can see on the code. The Indicator The indicator return two main lines, in blue the bull line who show the buying force and in red the bear line who show the selling force. An orange line show the signal line who represent the moving average of the max(bull,bear), this line aim to show possible exit/reversals points for the current trend. Length control the highest/lowest period as well as the smoothing amount, signal length control the moving average period of the signal line, the pre-filtering setting indicate which smoothing method will be used to smooth the input source before applying normalization. The default pre-filtering method is the sma. The ema method is slightly faster as you can see above. The triangular moving average is the moving average of another moving average, the impulse response of this filter is a triangular function hence its name. This moving average is really smooth. The lsma or least squares moving average is the fastest moving average used in this indicator, this filter try to best fit a linear function to the data in a certain window by using the least squares method. No filtering will use the source price without prior smoothing for the indicator calculation. Relationship With The Stochastic Oscillator The crosses between the bull and bear line mean that the stochastic oscillator crossed the 50 level. When the Bull line is equal to 0 this mean that the stochastic oscillator is equal to 0 while a bear line equal to 0 mean a stochastic oscillator equal to 100. The indicator and below a stochastic oscillator of both period 100 Using Levels Unlike a stochastic oscillator who would clip at the 0 and 100 level the proposed indicator is not heavily constrained in a range like the stochastic oscillator, this mean that you can apply levels to trigger signals Possible levels could be 1,2,3... even if the indicator rarely go over 3. Its then possible to create strategies using such levels as support or resistance one. Conclusion I've showed a modified stochastic oscillator who aim to show additional information to the user while keeping all the information a classical stochastic oscillator would give. The proposed indicator is no longer constrained in an hard range and posses more liberty to exploit its scale which in return allow to create strategies based on levels. For pinescript users what you can learn from this is that alternates forms of specific formulas can be extremely interesting to modify, changes can be really surprising so if you are feeling stuck, modifying alternates forms of know indicators can give great results, use tools such as sympy gamma to get alternates forms of formulas. Thanks for reading ! If you are looking for something or just want to say thanks try to pm me :)
Pine Script® インジケーター
alexgroverの投稿
9
Chaikin MF% (CMFP) w. Alerts, Bells & Whistles [LucF]This is Chaikin’s Money Flow indicator on a 0-100 scale with buy/sell signals, alerts and other bells & whistles. It includes: - a fast EMA (16 periods by default), - a slow MA (64 periods by default), - histograms, - 3 different sorts of crosses, - big swings identification, - buy/sell signals on CMFP crossing back from outside user-defined levels, - buy/sell signals on the slow MA pivots above/below user-defined levels, - alerts on big swings and buy/sells. This indicator started with @LazyBear code (VAPI) at: @cI8DH then changed the scale to 0-100, which I find very useful: I then added the rest. The chart above shows both clean and busy versions of the indicator. Note that the default length is 10 rather than the commonly used 20. I use CMFP in conjunction with VFI and like the fact that it is faster than VFI. The default inputs show the way I normally use this indicator, with the slow MA shown in histogram mode. I find it gives good context to the signal line. Crosses between the two are often useful. The buy/sell signals aren’t the main attraction of this indicator, and nothing to write home about. Like the big swing markers, I think it’s more realistic to view them as pointers to potentially interesting areas on charts. Their nature makes them more suited to identifying reversals. They certainly aren’t reliable enough to turn this study into a strategy and I normally don’t use them. The levels pre-defined for the buy/sell signals on CMFP are most useful on short intervals. The buy/sell signals on the slow MA pivots work on a more complete range of intervals. Optimization for your specific instruments and intervals will improve their reliability. As usual when defining alerts, be sure you already have defined proper inputs and that you are on the intended interval, as they will be used when triggering alerts.
Pine Script® インジケーター
LucFの投稿
Percentage Price Oscillator (PPO)The Percentage Price Oscillator (PPO) is a momentum oscillator that measures the difference between two moving averages as a percentage of the larger moving average. As with its cousin, MACD, the Percentage Price Oscillator is shown with a signal line, a histogram and a centerline. Signals are generated with signal line crossovers, centerline crossovers, and divergences. First, PPO readings are not subject to the price level of the security. Second, PPO readings for different securities can be compared, even when there are large differences in the price. Calculations PPO: {(12-day EMA - 26-day EMA)/26-day EMA} x 100 Signal Line: 9-day EMA of PPO PPO Histogram: PPO - Signal Line While MACD measures the absolute difference between two moving averages, PPO makes this a relative value by dividing the difference by the slower moving average (26-day EMA). PPO is simply the MACD value divided by the longer moving average. The result is multiplied by 100 to move the decimal place two spots. Interpretation As with MACD, the PPO reflects the convergence and divergence of two moving averages. PPO is positive when the shorter moving average is above the longer moving average. The indicator moves further into positive territory as the shorter moving average distances itself from the longer moving average. This reflects strong upside momentum. The PPO is negative when the shorter moving average is below the longer moving average. Negative readings grow when the shorter moving average distances itself from the longer moving average (goes further negative). This reflects strong downside momentum. The histogram represents the difference between PPO and its 9-day EMA, the signal line. The histogram is positive when PPO is above its 9-day EMA and negative when PPO is below its 9-day EMA. The PPO-Histogram can be used to anticipate signal line crossovers in the PPO. MACD, PPO and Price MACD levels are affected by the price of a security. A high-priced security will have higher or lower MACD values than a low-priced security, even if volatility is basically equal. This is because MACD is based on the absolute difference in the two moving averages. Because MACD is based on absolute levels, large price changes can affect MACD levels over an extended period of time. If a stock advances from 20 to 100, its MACD levels will be considerably smaller around 20 than around 100. The PPO solves this problem by showing MACD values in percentage terms. Conclusions The Percentage Price Oscillator (PPO) generates the same signals as the MACD, but provides an added dimension as a percentage version of MACD. The PPO levels of the Dow Industrials (price > 20K) can be compared against the PPO levels of IBM (price < 200) because the PPO “levels” the playing field. In addition, PPO levels in one security can be compared over extended periods of time, even if the price has doubled or tripled. This is not the case for the MACD. Limitations Despite its advantages, the PPO is still not the best oscillator to identify overbought or oversold conditions because movements are unlimited (in theory). Levels for RSI and the Stochastic Oscillator are limited and this makes them better suited to identify overbought and oversold levels. Source: Stockcharts
Pine Script® インジケーター
getmohsin.pyの投稿
1
Multiple Moving AveragesThis is really simple. But useful for me as I don't have a paid account. No-pro users can only use 3 indicators at once and because I rely heavily on simple moving averages it can be a real pain. This one indicator features: 20 MA 50 MA 100 MA 200 MA which I find are the most useful overall. The 20 and 50 over all time frame but in particular < 1 day, the 100 and 200 at > 4 hr time frames. In general I don't use the 100 MA that much. The daily 200 MA is a critical support for many assets like stocks and cryptos. I'm by no means a pro and if you are learning I recommend becoming familiar with moving averages right at the beginning. If you want to deactivate some of the lines, you can do it via the indicator's settings icon.
Pine Script® インジケーター
RealMcafeeの投稿
Exponential Moving Average (Set of 3) [Krypt] + 13/34 EMAsI took Krypt's script and essentially added on to it. the 20/50/100/200 EMAs should be used together as support and resistance as normal. Wait for price to break 200 EMA Wait for 50 EMA to cross 200 EMA Wait for pullback to 50 EMA to open position 20 and 100 EMAs are for extra information about moving support and resistance and 13/34 EMAs should be used in conjunction When 13 EMA crosses 34 EMA, open position When price gets far from 13/34, close position (because price will attempt to revert back to mean) This is better for scalping and swing trades than the 20/50/100/200 setup. Twitter: @AzorAhai06
Pine Script® インジケーター
AzorAhai06の投稿
Ichimoku Cloud Score v1.0This script calculates a simple Ichimoku Score based on the signals documented here , with a few additions. Each of the score components can be individually weighted via the script inputs . The output is a plot of the normalized Ichimoku score, in the range of -100 to 100. This script has been heavily modified from 'Ichimoku Cloud Signal Score v2.0.0 '. Credit to user 'dashed' for the initial implementation. This has been modified with several refinements: Clean/Organized Code Simplified Inputs Improved Style Scores normalized to a range (-100, 100) Bugfixes and Improvements Script Inputs: i.imgur.com
Pine Script® インジケーター
sjb933の投稿
6
Volume RatioDefinition: Volume ratio can be obtained in a similar way to RSI. Volume Ratio (%) = 100 - 100/(1+vr) The parameter "vr" is defined as vr=(A+U/2)/(D+U/2) A=Total volume of the periods when the price advanced D=Total volume of the periods when the price declined U=Total volume of the periods when the price unchanged After substitution, following expression can be derived and the denominator represents total volume of all periods. Volume Ratio (%) = 100 x (A+U/2)/(A+D+U) Notes: A similar method to interpret RSI can be employed. 1) Overbought level over 70% and oversold level under 30%. These levels need to be adjusted according to the periods, time frames and issues. 2) Bullish picture over 50% line and bearish picture under 50% line. 3) Crossing oversold level to the upside can be taken as a confirmation of bullish reversal. - and vice versa for a bearish reversal. 4) After a long-term bearish market, the increase of volume can happen in the early stage of a bullish market. 5) Buying opportunity can be suggested when the volume ratio is declining and the price is either advancing or leveling off.
Pine Script® インジケーター
Mizuki32の投稿
6
CCI with Volume Weighted EMA Here is an attempt to improve on the CCI using a volume weighted ema which is then plugged into the CCI formula. Use: The CCI with VW EMA is an oscillator that gives readings between -100 and +100. The usual use is to 'go long' with values over +100 and short on values less than -100. Another use of this oscillator is a countertrend indicator where one sells at crosses under +100 and buys on crosses over -100.
Pine Script® インジケーター
SpreadEagle71の投稿
6
Multi-Functional Fisher Transform MTF with MACDL TRIGGERWhat this indicator gives you is a true signal when price is exhausted and ready for a fast turnaround. Fisher Transform is set for multi-time frame and also allows the user to change the length. This way a user can compare two or more time spans and lengths to look for these MACDL divergent triggers after a Fisher exhaustion. With so many indicators, it's probably best to merge these indicators and change the Fisher and Trigger colors so you can still have a look at price action (remember to scale right after merger). I've noticed from time to time when you have Fisher 34 100 and 300 up and running on two different time frames such as 5 and 15 min charts, with MACDL triggers on the 100/300 or 34/100 you get a high probability trade trigger. However, there are rare exceptions such as when price moves in a parabolic state up or down for a long period where this indication does not work. Ideally this indicator works best in a sideways market or slow rising/descending moving market. This indicator was worked on by Glaz, nmike and myself LazyBear also introduced the MACDL indicator
Pine Script® インジケーター
QuantitativeExhaustionの投稿
18
AG Pro Crypto Screener & Signal Dashboard🚀 OVERVIEW Welcome to the AG Pro Crypto Screener & Signal Dashboard, an institutional-grade scanner designed to find high-probability buy opportunities in the chaotic crypto market. This powerful tool is being offered completely free as an introduction to the precision and performance of the exclusive AG Pro series. Tired of manually flipping through dozens of charts? This dashboard is your new command center. It simultaneously scans up to 40 crypto assets against a robust, multi-filter strategy. It filters out the noise and delivers a clean, actionable list of symbols that are showing combined signs of strength, momentum, and a confirmed uptrend. 🧠 THE CORE STRATEGY: A Multi-Filter Confluence This screener doesn't rely on a single, weak indicator. A symbol only appears on the "Buy List" if it passes a strict, user-configurable set of confluence filters: Bullish EMA Crossover: Confirms a new, bullish shift in short-term momentum by looking for a recent crossover of a Fast EMA over a Slow EMA (e.g., 20/50). The "Freshness" feature ensures the signal is recent. RSI Momentum Filter: Ensures the asset has strong buying momentum. The signal is only valid if the RSI is above a specified level (e.g., > 50). Long-Term Trend Filter: This is the most critical filter. It keeps you on the right side of the market by confirming the price is above a key long-term Moving Average (e.g., SMA 50, 100, 200). You trade with the trend, not against it. MACD Crossover (Optional): For traders who want an extra layer of confirmation, you can enable a filter to check for a bullish MACD crossover. Only when all selected conditions are met does the asset appear on your dashboard. This multi-layered approach is designed to find quality over quantity. ✨ KEY FEATURES Dynamic 40-Symbol Scanner: Monitor your entire watchlist (up to 40 symbols) from a single chart. Professional Signal Dashboard: A clean, sortable table displaying all active signals, last price, RSI value, and volume. "Freshness" & "Trend" Icons: Instantly gauge signal quality. Freshness: See how many bars ago the signal appeared (🔥 Hot / ❇️ Fresh / ⏳ Old). Trend: A clear visual icon shows if the asset is in a long-term uptrend (🔼) or downtrend (🔽). NEW Signal Alerts: Don't miss an opportunity. Set an alert to be notified only when a new symbol appears on the list. This non-intrusive system avoids constant, repetitive alerts. Fully Customizable Strategy: You are in control. Toggle any of the four main filters (EMA, RSI, Trend, MACD) on or off. Adjust all indicator lengths (EMAs, RSI, MACD, and Trend MA) to fit your trading style. Reliable "On-Close" Signaling: Includes an option to generate signals only on bar close, ensuring high-quality, non-repainting signals. Clean UI: Adjustable table text size ("Tiny", "Small", "Normal", "Large") for perfect visibility on any setup. 💎 THE AG PRO DIFFERENCE This free screener is just the beginning. It's a demonstration of the stable, high-performance, and results-driven philosophy that defines the AG Pro brand. We believe in empowering traders with tools that provide a clear, statistical edge. While this screener is powerful, our private, premium AG Pro scripts (such as the AG Pro Trading Suite) offer a complete, institutional-grade solution for serious traders. These advanced tools feature predictive models, proprietary signal algorithms, and comprehensive risk management modules that are the result of years of professional development. If you find value in this free tool, imagine what our full suite can do for your trading. We invite you to experience the next level of trading precision. 🛠️ HOW TO USE Add the "🏆 AG Pro Crypto Screener & Signal Dashboard V3" to your chart. Open the indicator's Settings. Under the "Symbol List to Scan" tab, replace the default symbols with your own 40 preferred assets (e.g., "BINANCE:BTCUSDT", "BINANCE:ETHUSDT", "COINBASE:SOLUSD"). Under the "Filter Settings" tab, configure your desired strategy. You can start with the defaults or customize them. (Recommended) Right-click the table and select "Create Alert". Choose the "NEW BUY" condition and "Once Per Bar Close" to be notified of new signals. ⚠️ DISCLAIMER This script is provided for informational and educational purposes only. It does not constitute financial or investment advice. All trading involves significant risk, and past performance is not indicative of future results. Please conduct your own research and implement your own risk management strategy before making any trading decisions.
Pine Script® インジケーター
AGProLabsの投稿
Smart Flow Tracker [The_lurker] Smart Flow Tracker (SFT): Advanced Order Flow Tracking Indicator Overview Smart Flow Tracker (SFT) is an advanced indicator designed for real-time tracking and analysis of order flows. It focuses on detecting institutional patterns, massive orders, and potential reversals through analysis of lower timeframes (Lower Timeframe) or live ticks. It provides deep insights into market behavior using a multi-layered intelligent detection system and a clear visual interface, giving traders a competitive edge. SFT focuses on trade volumes, directions, and frequencies to uncover unusual activity that may indicate institutional intervention, massive orders, or manipulation attempts (traps). Indicator Operation Levels SFT operates on three main levels: 1. Microscopic Monitoring: Tracks every trade at precise timeframes (down to one second), providing visibility not available in standard timeframes. 2. Advanced Statistical Analysis: Calculates averages, deviations, patterns, and anomalies using precise mathematical algorithms. 3. Behavioral Artificial Intelligence: Recognizes behavioral patterns such as hidden institutional accumulation, manipulation attempts and traps, and potential reversal points. Key Features SFT features a set of advanced functions to enhance the trader's experience: 1. Intelligent Order Classification System: Classifies orders into six categories based on size and pattern: - Standard: Normal orders with typical size. - Significant 💎: Orders larger than average by 1.5 times. - Major 🔥: Orders larger than average by 2.5 times. - Massive 🐋: Orders larger than average by 3 times. - Institutional 🏛️: Consistent patterns indicating institutional activity. - Reversal 🔄: Large orders indicating direction change. - Trap ⚠️: Patterns that may be price traps. 2. Institutional Patterns Detection: Tracks sequences of similar-sized orders, detects organized institutional activity, and is customizable (number of trades, variance ratio). 3. Reversals Detection: Compares recent flows with previous ones, detects direction shifts from up to down or vice versa, and operates only on large orders (Major/Massive/Institutional). 4. Traps Detection: Identifies sequences of large orders in one direction, followed by an institutional order in the opposite direction, with early alerts for false moves. 5. Flow Delta Bar: Displays the difference between buy and sell volumes as a percentage for balance, with instant updates per trade. 6. Dynamic Statistics Panel: Displays overall buy and sell ratios with real-time updates and interactive colors. How It Works and Understanding SFT relies on logical sequential stages for data processing: A. Data Collection: Uses the `request.security_lower_tf()` function to extract data from a lower timeframe (like 1S) even on a higher timeframe (like 5D). For each time unit, it calculates: - Adjusted Volume: Either normal volume or "price-weighted volume" (hlc3 * volume) based on user choice. - Trade Direction: Compared to previous close (rise → buy, fall → sell). B. Building Temporary Memory: Maintains a dynamic list (sizeHistory) of the last 100 trade sizes, continuously calculating the moving average (meanSize). C. Intelligent Classification: Compares each new trade to the average: - > 1.5 × average → Significant. - > 2.5 × average → Major. - > 3.0 × average → Massive. - Institutional Patterns Check: A certain number of trades (e.g., 5) with a specified variance ratio (±5%) → Institutional. D. Advanced Detection: - Reversal: Compares buy/sell totals in two consecutive periods. - Trap: Sequence of large trades in one direction followed by an opposite institutional trade. E. Display and Alerts: Results displayed in an automatically updated table, with option to enable alerts for notable events. Settings (Fully Customizable) SFT offers extensive options to adapt to the trader's needs: A. Display Settings: - Language: English / Arabic. - Table Position: 9 options (e.g., Top Right, Middle Right, Bottom Left). - Display Size: Tiny / Small / Normal / Large. - Max Rows: 10–100. - Enable Flow Delta Bar: Yes / No. - Enable Statistics Panel: Yes / No (displays buy/sell % ratio). B.- Technical Settings: - Data Source: Lower Timeframe / Live Tick (simulation). - Timeframe: Optional (e.g., 1S, 5S, 1). - Calculation Type: Volume / Price Volume. C. Intelligent Detection System: - Enable Institutional Patterns Detection. - Pattern Length: 3–20 trades. - Allowed Variance Ratio: 1%–20%. - Massive Orders Detection Factor: 2.0–10.0. D. Classification Criteria: - Significant Orders Factor: 1.2–3.0. - Major Orders Factor: 2.0–5.0. E. **Advanced Detection**: - Enable Reversals Detection (with review period). - Enable Traps Detection (with minimum sequence limit). F. Alerts System: - Enable for each type: Massive orders, institutional patterns, reversals, traps, severe imbalance (60%–90%). G. Color System: Manual customization for each category: - Standard Buy 🟢: Dark gray green. - Standard Sell 🔴: Dark gray red. - Significant Buy 🟢: Medium green. - Significant Sell 🔴: Medium red. - Major Orders 🟣: Purple. - Massive Orders 🟠: Orange. - Institutional 🟦: Sky blue. - Reversal 🔵: Blue. - Trap 🟣: Pink-purple. Target Audiences SFT benefits a wide range of traders and investors: 1. Scalpers: Instant detection of large orders, liquidity points identification, avoiding traps in critical moments. 2. Day Traders: Tracking smart money footprint, determining real session direction, early reversals detection. 3. Swing Traders: Confirming trend strength, detecting institutional accumulation/distribution, identifying optimal entry points. 4. Investors: Understanding true market sentiments, avoiding entry at false peaks, identifying real value zones. ⚠️ Disclaimer: This indicator is for educational and analytical purposes only. It does not constitute financial, investment, or trading advice. Use it in conjunction with your own strategy and risk management. Neither TradingView nor the developer is liable for any financial decisions or losses. Smart Flow Tracker (SFT): مؤشر متقدم لتتبع تدفقات الأوامر نظرة عامة Smart Flow Tracker (SFT) مؤشر متقدم مصمم لتتبع وتحليل تدفقات الأوامر في الوقت الفعلي. يركز على كشف الأنماط المؤسسية، الأوامر الضخمة، والانعكاسات المحتملة من خلال تحليل الأطر الزمنية الأقل (Lower Timeframe) أو التيك الحي. يوفر رؤية عميقة لسلوك السوق باستخدام نظام كشف ذكي متعدد الطبقات وواجهة مرئية واضحة، مما يمنح المتداولين ميزة تنافسية. يركز SFT على حجم الصفقات، اتجاهها، وتكرارها لكشف النشاط غير العادي الذي قد يشير إلى تدخل مؤسسات، أوامر ضخمة، أو محاولات تلاعب (فخاخ). مستويات عمل المؤشر يعمل SFT على ثلاثة مستويات رئيسية: 1. المراقبة المجهرية: يتتبع كل صفقة على مستوى الأطر الزمنية الدقيقة (حتى الثانية الواحدة)، مما يوفر رؤية غير متوفرة في الأطر الزمنية العادية. 2. التحليل الإحصائي المتقدم: يحسب المتوسطات، الانحرافات، الأنماط، والشذوذات باستخدام خوارزميات رياضية دقيقة. 3. الذكاء الاصطناعي السلوكي: يتعرف على أنماط سلوكية مثل التراكم المؤسسي المخفي، محاولات التلاعب والفخاخ، ونقاط الانعكاس المحتملة. الميزات الرئيسية يتميز SFT بمجموعة من الوظائف المتقدمة لتحسين تجربة المتداول: 1. نظام تصنيف الأوامر الذكي: يصنف الأوامر إلى ست فئات بناءً على الحجم والنمط: - Standard (قياسي)**: أوامر عادية بحجم طبيعي. - Significant 💎 (مهم)**: أوامر أكبر من المتوسط بـ1.5 ضعف. - Major 🔥 (كبير)**: أوامر أكبر من المتوسط بـ2.5 ضعف. - Massive 🐋 (ضخم)**: أوامر أكبر من المتوسط بـ3 أضعاف. - Institutional 🏛️ (مؤسسي)**: أنماط متسقة تشير إلى نشاط مؤسسي. - Reversal 🔄 (انعكاس)**: أوامر كبيرة تشير إلى تغيير اتجاه. - Trap ⚠️ (فخ)**: أنماط قد تكون فخاخًا سعرية. 2. كشف الأنماط المؤسسية: يتتبع تسلسل الأوامر المتشابهة في الحجم، يكشف النشاط المؤسسي المنظم، وقابل للتخصيص (عدد الصفقات، نسبة التباين). 3. كشف الانعكاسات: يقارن التدفقات الأخيرة بالسابقة، يكشف تحول الاتجاه من صعود إلى هبوط أو العكس، ويعمل فقط على الأوامر الكبيرة (Major/Massive/Institutional). 4. كشف الفخاخ: يحدد تسلسل أوامر كبيرة في اتجاه واحد، يليها أمر مؤسسي في الاتجاه المعاكس، مع تنبيه مبكر للحركات الكاذبة. 5. شريط دلتا التدفق: يعرض الفرق بين حجم الشراء والبيع كنسبة مئوية للتوازن، مع تحديث فوري لكل صفقة. 6. لوحة إحصائيات ديناميكية: تعرض نسبة الشراء والبيع الإجمالية مع تحديث لحظي وألوان تفاعلية. طريقة العمل والفهم يعتمد SFT على مراحل منطقية متسلسلة لمعالجة البيانات: أ. جمع البيانات: يستخدم دالة `request.security_lower_tf()` لاستخراج بيانات من إطار زمني أدنى (مثل 1S) حتى على إطار زمني أعلى (مثل 5D). لكل وحدة زمنية، يحسب: - الحجم المعدّل: إما الحجم العادي (volume) أو "الحجم المرجّح بالسعر" (hlc3 * volume) حسب الاختيار. - اتجاه الصفقة: مقارنة الإغلاق الحالي بالسابق (ارتفاع → شراء، انخفاض → بيع). ب. بناء الذاكرة المؤقتة: يحتفظ بقائمة ديناميكية (sizeHistory) لآخر 100 حجم صفقة، ويحسب المتوسط المتحرك (meanSize) باستمرار. ج. التصنيف الذكي: يقارن كل صفقة جديدة بالمتوسط: - > 1.5 × المتوسط → Significant. - > 2.5 × المتوسط → Major. - > 3.0 × المتوسط → Massive. - فحص الأنماط المؤسسية: عدد معين من الصفقات (مثل 5) بنسبة تباين محددة (±5%) → Institutional. د. الكشف المتقدم: - الانعكاس: مقارنة مجموع الشراء/البيع في فترتين متتاليتين. - الفخ: تسلسل صفقات كبيرة في اتجاه واحد يتبعها صفقة مؤسسية معاكسة. هـ. العرض والتنبيه: عرض النتائج في جدول محدّث تلقائيًا، مع إمكانية تفعيل تنبيهات للأحداث المميزة. لإعدادات (قابلة للتخصيص بالكامل) يوفر SFT خيارات واسعة للتكييف مع احتياجات المتداول: أ. إعدادات العرض: - اللغة: English / العربية. - موقع الجدول: 9 خيارات (مثل Top Right, Middle Right, Bottom Left). - حجم العرض: Tiny / Small / Normal / Large. - الحد الأقصى للصفوف: 10–100. - تفعيل شريط دلتا التدفق: نعم / لا. - تفعيل لوحة الإحصائيات: نعم / لا (تعرض نسبة الشراء/البيع %). ب. الإعدادات التقنية: - مصدر البيانات: Lower Timeframe / Live Tick (محاكاة). - الإطار الزمني: اختياري (مثل 1S, 5S, 1). - نوع الحساب: Volume / Price Volume. ج. نظام الكشف الذكي: - تفعيل كشف الأنماط المؤسسية. - طول النمط: 3–20 صفقة. - نسبة التباين: 1%–20%. - عامل كشف الأوامر الضخمة: 2.0–10.0. د. معايير التصنيف: - عامل الأوامر المهمة: 1.2–3.0. - عامل الأوامر الكبرى: 2.0–5.0. هـ. الكشف المتقدم: - تفعيل كشف الانعكاسات (مع فترة مراجعة). - تفعيل كشف الفخاخ (مع حد أدنى للتسلسل). و. نظام التنبيهات: - تفعيل لكل نوع: أوامر ضخمة، أنماط مؤسسية، انعكاسات، فخاخ، عدم توازن شديد (60%–90%). ز. نظام الألوان**: تخصيص يدوي لكل فئة: - شراء قياسي 🟢: أخضر رمادي داكن. - بيع قياسي 🔴: أحمر رمادي داكن. - شراء مهم 🟢: أخضر متوسط. - بيع مهم 🔴: أحمر متوسط. - أوامر كبرى 🟣: بنفسجي. - أوامر ضخمة 🟠: برتقالي. - مؤسسي 🟦: أزرق سماوي. - انعكاس 🔵: أزرق. - فخ 🟣: وردي-أرجواني. الفئات المستهدفة يستفيد من SFT مجموعة واسعة من المتداولين والمستثمرين: 1. السكالبرز (Scalpers): كشف لحظي للأوامر الكبيرة، تحديد نقاط السيولة، تجنب الفخاخ في اللحظات الحرجة. 2. المتداولون اليوميون (Day Traders): تتبع بصمة الأموال الذكية، تحديد اتجاه الجلسة الحقيقي، كشف الانعكاسات المبكرة. 3. المتداولون المتأرجحون (Swing Traders): تأكيد قوة الاتجاه، كشف التراكم/التوزيع المؤسسي، تحديد نقاط الدخول المثلى. 4. المستثمرون: فهم معنويات السوق الحقيقية، تجنب الدخول في قمم كاذبة، تحديد مناطق القيمة الحقيقية. ⚠️ إخلاء مسؤولية: هذا المؤشر لأغراض تعليمية وتحليلية فقط. لا يُمثل نصيحة مالية أو استثمارية أو تداولية. استخدمه بالتزامن مع استراتيجيتك الخاصة وإدارة المخاطر. لا يتحمل TradingView ولا المطور مسؤولية أي قرارات مالية أو خسائر.
Pine Script® インジケーター
The_lurkerの投稿