始めましょう

トレンド分析

Bollinger Band with Fib Golden Ratio (0.618)This startegy uses Fib level (0.618) of Bollinger Band for long entry. I find this is the only strategy which gives similar results on the different time frames. I have tested QQQ for 1H, 2H , 3H and 4H charts , all showed over 70% winning rate. BB settings 50 , mult 1.5 (or you can use 2.5 or 3 ) Note: for the basis I have used VWMA instead of SMA . BUY ========= ema 50 is above ema 200 when the price close or low touches BB50(Fib0.615) lower band Exit ========= when the price crossover BB50(Fib0.615) upper band Stop Loss ========= Stop oss set to 5% , configurable Strategy works similar to mean reversion style. When it touches the lower bans (which 0.615 level of the BB50) , it bounces from there. Warning ========= This strategy is for educational purposes only. Please do your own reserach for trading decissions.
Pineスクリプト™ ストラテジー
mohaneeの投稿
9
KAMA Strategy - Kaufman's Adaptive Moving AverageThis strategy combines Kaufman's Adaptive Moving Average for entry with optional KAMA, PSAR, and Trailing ATR stops for exits. Kaufman's Adaptive Moving Average is, in my opinion, a gem among the plethora of indicators. It is underrated considering it offers a solution that intuitively makes a lot of sense. When I first read about it, it was a real 'aha!' moment. Look at the top, pink line. Notice how during trending times it follows the trend quickly and closely, but during choppy, non-trending periods, the KAMA stays absolutely flat? Interesting! To trade with it, we simply follow the direction the KAMA is pointing. Is it up? Go long. Is it down? Go short. Is it flat? Hold on. How does it manage to quickly follow real trends like a fast EMA but ignore choppy conditions that would whipsaw a fast EMA back and forth? It analyses whether recent price moves are significant relative to recent noise and then adapts the length of the EMA window accordingly. If price movement is big compared to the recent noise, the EMA window gets smaller. If price movement is relatively small or average compared to the recent noise, the EMA window gets bigger. In practice it means: The KAMA would be flat if a 20 point upwards move occurred during a period that has had, on average, regular 20 point moves BUT the KAMA would point up if a 20 point move occurred during a period that has, on average, had moves of only around 5 points. In other words, it's a slow EMA during choppy flat / quiet flat periods, and a fast EMA as soon as significant volatility occurs. Perfect! ----- The Strategy The strategy is more than just a KAMA indicator. It contains: KAMA exit (optional) ATR trailing stop loss exit (optional) PSAR stop loss exit (optional) KAMA filter for entry and exits All features are adjustable in the strategy settings The Technical Details: Check out the strategy's 'Inputs' panel. The buy and sell signals are based on the 'KAMA 1' there. KAMA 1: Length -- 14 is the default. This is the length of the window the KAMA looks back over. In this instance, it c KAMA 1: Fast KAMA Length -- 2 is the default. This is the tightest the EMA length is allowed to get. It will tend towards this length when volatility is high. KAMA 1: Slow KAMA Length -- 20 is the default. This is the biggest the EMA length is allowed to get. It will tend towards this length when volatility is low. KAMA Filter The strategy buys when the KAMA begins to point up and sells when the KAMA points down. Generally, the KAMA is very good at filtering out the noise itself - it will go flat during noisy/choppy periods. But to add another layer of safety, its author, Perry Kaufman, proposed a KAMA filter. It works by taking the standard deviation of returns over the length of the the 'KAMA 1: Length' I mentioned above and multiplying it by an 'Entry Filter' (1 by default) and 'Exit Filter' (0.5 by default). The entry condition to go long is that the KAMA is pointing up and and it moved up more than 1 x St. Dev. of Returns. The exit condition is when the KAMA is pointing down and it moved down by more than 0.5 x St. Dev. of Returns. Thanks Thanks to ChuckBanger, cheatcountry, millerrh, and racer8 for parts of the code. I was able to build upon their good work. ----- I hope this strategy is helpful to you. Do you have any thoughts, ideas, or questions? Let me know in the comments or send me a message! I'd be glad to help you out. If you need an indicator or strategy to be built or customised for you, let me know! I'll be glad to help and it'll probably be cheaper than you think!
Pineスクリプト™ ストラテジー
cisl22klasjkの投稿
15
Donchian Channels Strategy by KrisWatersDoncian Channels is a trend tracking indicator developed by Richard Doncian. The upper line of the channel is determined by the highest value seen by the price in the defined period, the lower line of the channel is determined by the lowest value seen by the price in the defined period. The middle line takes the average value of the lower and upper channels. Strategy Settings: - Can apply only LONG positions. - Can apply only SHORT positions. - Use LONG/SHORT both. - You can use ATR as a second exit condition. If ATR stop disabled, Donchian upper or lower channel value is use for the exit rule to long and short positions. Strategy can be able to optimize by changing channel lengths and timeframe.
Pineスクリプト™ ストラテジー
kriswatersの投稿
8
Ultimate Strategy TemplateHello Traders As most of you know, I'm a member of the PineCoders community and I sometimes take freelance pine coding jobs for TradingView users. Off the top of my head, users often want to: - convert an indicator into a strategy, so as to get the backtesting statistics from TradingView - add alerts to their indicator/strategy - develop a generic strategy template which can be plugged into (almost) any indicator My gift for the community today is my Ultimate Strategy Template Step 1: Create your connector Adapt your indicator with only 2 lines of code and then connect it to this strategy template. For doing so: 1) Find in your indicator where are the conditions printing the long/buy and short/sell signals. 2) Create an additional plot as below I'm giving an example with a Two moving averages cross. Please replicate the same methodology for your indicator wether it's a MACD, ZigZag, Pivots, higher-highs, lower-lows or whatever indicator with clear buy and sell conditions //@version=4 study(title='Moving Average Cross', shorttitle='Moving Average Cross', overlay=true, precision=6, max_labels_count=500, max_lines_count=500) type_ma1 = input(title="MA1 type", defval="SMA", options= ) length_ma1 = input(10, title = "   MA1 length", type=input.integer) type_ma2 = input(title="MA2 type", defval="SMA", options= ) length_ma2 = input(100, title = "   MA2 length", type=input.integer) // MA f_ma(smoothing, src, length) => iff(smoothing == "RMA", rma(src, length), iff(smoothing == "SMA", sma(src, length), iff(smoothing == "EMA", ema(src, length), src))) MA1 = f_ma(type_ma1, close, length_ma1) MA2 = f_ma(type_ma2, close, length_ma2) // buy and sell conditions buy = crossover(MA1, MA2) sell = crossunder(MA1, MA2) plot(MA1, color=color_ma1, title="Plot MA1", linewidth=3) plot(MA2, color=color_ma2, title="Plot MA2", linewidth=3) plotshape(buy, title='LONG SIGNAL', style=shape.circle, location=location.belowbar, color=color_ma1, size=size.normal) plotshape(sell, title='SHORT SIGNAL', style=shape.circle, location=location.abovebar, color=color_ma2, size=size.normal) /////////////////////////// SIGNAL FOR STRATEGY ///////////////////////// Signal = buy ? 1 : sell ? -1 : 0 plot(Signal, title="🔌Connector🔌", transp=100) Basically, I identified my buy, sell conditions in the code and added this at the bottom of my indicator code Signal = buy ? 1 : sell ? -1 : 0 plot(Signal, title="🔌Connector🔌", transp=100) Important Notes 🔥 The Strategy Template expects the value to be exactly 1 for the bullish signal , and -1 for the bearish signal Now you can connect your indicator to the Strategy Template using the method below or that one Step 2: Connect the connector 1) Add your updated indicator to a TradingView chart 2) Add the Strategy Template as well to the SAME chart 3) Open the Strategy Template settings and in the Data Source field select your 🔌Connector🔌 (which comes from your indicator) From then, you should start seeing the signals and plenty of other stuff on your chart 🔥 Note that whenever you'll update your indicator values, the strategy statistics and visual on your chart will update in real-time Settings - Color Candles : Color the candles based on the trade state (bullish, bearish, neutral) - Close positions at market at the end of each session : useful for everything but cryptocurrencies - Session time ranges : Take the signals from a starting time to an ending time - Close Direction : Choose to close only the longs, shorts, or both - Date Filter : Take the signals from a starting date to an ending date - Set the maximum losing streak length with an input - Set the maximum winning streak length with an input - Set the maximum consecutive days with a loss - Set the maximum drawdown (in % of strategy equity) - Set the maximum intraday loss in percentage - Limit the number of trades per day - Limit the number of trades per week - Stop-loss: None or Percentage or Trailing Stop Percentage or ATR - Take-Profit: None or Percentage or ATR - Risk-Reward based on ATR multiple for the Stop-Loss and Take-Profit This script is open-source so feel free to use it, and optimize it as you want Alerts Maybe you didn't know it but alerts are available on strategy scripts. I added them in this template - that's cool because: - if you don't know how to code, now you can connect your indicator and get alerts - you have now a cool template showing you how to create alerts for strategy scripts Source: www.tradingview.com I hope you'll like it, use it, optimize it and most importantly....make some optimizations to your indicators thanks to this Strategy template Special Thanks Special thanks to @JosKodify as I borrowed a few risk management snippets from his website: kodify.net Additional features I thought of plenty of extra filters that I'll add later on this week on this strategy template Best Dave
Pineスクリプト™ ストラテジー
Daveattの投稿
274
Grid ToolThe core idea of this grid tool is that you have to concentrate less on the trade entries (this happens automatically time-independent but price-dependant) but rather on the validity of the macro trend. Exiting a trend when it is no longer valid is more important than entering a trade. But as long as the trend is valid, the trader participates exponentially in the overall trend. It is advisable to start with a basic position and then "set up" the grid on this in a ratio of 1/10. A major advantage of grid trading is that the average entry price in a trend moves further and further away from the current market price while the position continues to grow. A small timeframe should be used so that the distance between the trades corresponds as closely as possible to the selected grid gap and since TV backtests are carried out with closed bars. Before starting a grid, pre-analysis the market to make sure it is trending. Select the grid gap and grid position size that you are comfortable with. Monitor the trend and from time to time take some profit :). PS: The ADX filter looks interesting.
Pineスクリプト™ ストラテジー
ramsay09の投稿
5
LAGging span leaves Bollinger Bands strategyAbstract This script points out the positions a lagging span leaves a Bollinger Band. This script does not plot a lagging span but moves the Bollinger Band forward. You can find profit opportunities by combining this script and risk management. Introduction Bollinger Bands is a popular indicator. It contains a moving average, an upper band and a lower band. The moving average can indicate trend, the upper band and the lower band can indicate if the price is far away from the moving average. However, in trading markets, anything can happen. Both continuation and reversal are possible when the price touches the moving average, the upper band or the lower band. Therefore, many traders adjust the parameters of the Bollinder Band or add other indicators to improve their trading strategies. @Daveatt et. al. provided an idea that uses a lagging span. A lagging span is a line chart. It displays the reference price but in earlier time. For example, if the offset of a lagging span is 26 days, the value of the lagging span on 29 days ago is the reference price 3 days ago. A lagging span is a part of Ichimoku Cloud. It can compare the price to the earlier price and the values of indicators in the past. To compare the price to the values of indicators in the past, we can also shift indicators forward instead of adding a lagging span into the chart. This script uses shift-the-indicators-forward method. In other words, this script plots the Bollinger Band forward so that the price can be compared to the values of the Bollinger Band in the past. Computing and Adjusting (1) Compute Moving Average (2) Compute Standard Derivation (3) Upper Band = Moving Average + Standard Derivation * Multi (4) Lower Band = Moving Average - Standard Derivation * Multi (5) Shift the Bollinger Band forward according to the offset parameter. (6) Mark the points the price leaves the shifted Bollinger Band (7) Compute the most possible loss and profit before the next opposite signal. Parameters source : the data for computing the bollinger band. can be open, high, low, close or their combination. length : how many days are calculated by the bollinger band mult : the distance from the moving average to the upper band and the distance from the moving average to the upper band is equal to ( mult * standard derivation ) . x_offset : the offset of the lagging span Conclusion This script can find signals for potential breakout or trend continuation. If you want to use this signal well, you need to know when to cut loss and protect the profit. Reference @Daveatt , Bollinger bands/Lagging span cross , BGyrPgOA , Tradingview 2019 How to trade with Bollinger Bands How to use Ichimoku Cloud How to trade with a line chart
Pineスクリプト™ ストラテジー
clocks156t174の投稿
4
RSI of MACD Strategy [Long only]This strategy uses the RSI on MACD indicator. BUY ==== When RSI indicator crossing over 30 or 35 line and price above slow ema Note: when the position already taken, you may reenter on the purple candle Partial Exit ========== Partial profit taking option is available in settings. If this is selected , 1/3 position exited when RSI indicator crossing down 80 line Close ===== When RSI indicator crossing below 15 Stop Loss ========= I havent used hard stop loss in this strategy. Reason is , when price going down , indicator may go up ... so just wanted to ride along with indicator ... Stop loss mentioned in the settings is used in calculation of how many units can be be purchased based on risk level Tested with SPY and QQQ ETFs on hourly chart Warning ========= For the eductional purposes only ... This is not a financial advise. please do your own research before taking any trading decission
Pineスクリプト™ ストラテジー
mohaneeの投稿
6
Triple SMA Strategy with entries based on sma price closesHi! :) This strategy is made for intraday trades, especially on 5 sec - 5 min charts to follow the trend. I have not tested on higher timeframes, but feel free to play with the values. I have set a basic value for the 3 SMA at -200 -400 -600 We will use an oscillator for entries which is not mine. Link -> The oscillator mentioned above is just for visualization purposes, You do not need to get the signals, but You can see how scripts are generated with different values. When the price above/below all the 3 SMA and oscillator crosses above/below "value you set" - You will get the buy or sell signal. Your stop will be where the slowest SMA is. Pyramiding is set for 10. You can manually set 3 take profit and quantity levels. Basic values are 1 %, 2 %, and 6 % for taking profits - You can change it based on how volatile the asset is. Basic quantity values are 30 % at each level. Hope You find it useful :)
Pineスクリプト™ ストラテジー
RwTradesの投稿
2
[DS]Entry_Exit_TRADE.V01-StrategyThe proposal of this script is to show the possible trading points of BUY and SELL based on the 15-minute chart of the Nasdaq Future Index. The start point of the strategy was schedule for 2021/01/01 and until the time of this publication (2021/01/31), for 1 index contract the results presented area a Gross Profit of 2.97% with a Net Profit of 1.35%. █ FEATURES The indicator shows on the graph the position of the MACD and TSI indicators that are the places of strength among Buyers and Sellers. It's possible to observe a sharp fall or rise in the price of these positions. On the current candle, a label is displayed containing the value of the William %R Mod indicator, which will display the OverBought position (dark red) and OverSold position (dark green). The other colors like light red and green are the regions where the price makes the decision of which direction to go. There are also other indicators: a) The positions of the BUY (light green) and SELL areas (light red); b) The label with the position of BUY (dark green) and SELL (dark red) with the line that connects these points; c) DEMA 72 (orange); d) EmaOchl4 in the color green for BULL and red for BEAR market; e) Pivots high and low f) Maximum (purple light) and minimum areas (blue light) █ FUNCTIONS AND SETTINGS The indicator uses the following functions: (1) DEMA - Double Exponential Moving Average (08,17,34, 72) (2) ema () - Exponential Moving Averge (72, ohlc4) (3) plot() (4) barcolor() (5) cross() (6) pivots () (7) William R% Md (OverBought = -7, OverSold=-93) (8) Maximum and Minimum Value (9) fill() (10) macd () - Moving Average Convergence Divergence (Fast Lengt=12, Slow Length=26, Source=close, Signal Smoothing=9) (11) tsi() - Trading Strenght Indicator==> Índice de Força Real ( IFR ) (Long Length=72, Short Length=17, Signal Length=17) (12) Buy and Sell TRADE Points █ PERFORMANCE AND ERRORS The positions of BUY and SELL points are defined through the crossing of the Dema 34 candles with the Ema Ohcl4. As it is an indicator, it can present different positions from de market direction. Thus there is a need to observe the direction of the market in order to verify whether the indicate decision is really acceptable. The decision to BUY or SELL an asset must be well studied to avoid financial losses. The indicator will only help you in this decision, is your responsibility the decision of entering or leaving an asset. █ THANKS TO PineCoders for all they do, all the tools and help they provide, and their involvement in making a better community. All the PineCoders, Pine Pros, and Pine Wizards, people who share their work and knowledge for the sake of it and helping others, I'm very happy and grate full indeed. █ NOTE If you have any suggestions for improving the script or need help using it, please send a message in the comments
Pineスクリプト™ ストラテジー
DalmarSantosの投稿
20
Combo Backtest 123 Reversal & MACD Crossover This is combo strategies for get a cumulative signal. First strategy This System was created from the Book "How I Tripled My Money In The Futures Market" by Ulf Jensen, Page 183. This is reverse type of strategies. The strategy buys at market, if close price is higher than the previous close during 2 days and the meaning of 9-days Stochastic Slow Oscillator is lower than 50. The strategy sells at market, if close price is lower than the previous close price during 2 days and the meaning of 9-days Stochastic Fast Oscillator is higher than 50. Second strategy MACD – Moving Average Convergence Divergence. The MACD is calculated by subtracting a 26-day moving average of a security's price from a 12-day moving average of its price. The result is an indicator that oscillates above and below zero. When the MACD is above zero, it means the 12-day moving average is higher than the 26-day moving average. This is bullish as it shows that current expectations (i.e., the 12-day moving average) are more bullish than previous expectations (i.e., the 26-day average). This implies a bullish, or upward, shift in the supply/demand lines. When the MACD falls below zero, it means that the 12-day moving average is less than the 26-day moving average, implying a bearish shift in the supply/demand lines. A 9-day moving average of the MACD (not of the security's price) is usually plotted on top of the MACD indicator. This line is referred to as the "signal" line. The signal line anticipates the convergence of the two moving averages (i.e., the movement of the MACD toward the zero line). Let's consider the rational behind this technique. The MACD is the difference between two moving averages of price. When the shorter-term moving average rises above the longer-term moving average (i.e., the MACD rises above zero), it means that investor expectations are becoming more bullish (i.e., there has been an upward shift in the supply/demand lines). By plotting a 9-day moving average of the MACD, we can see the changing of expectations (i.e., the shifting of the supply/demand lines) as they occur. WARNING: - For purpose educate only - This script to change bars colors.
Pineスクリプト™ ストラテジー
HPotterの投稿
5
Combo Backtest 123 Reversal & Line Regression Intercept This is combo strategies for get a cumulative signal. First strategy This System was created from the Book "How I Tripled My Money In The Futures Market" by Ulf Jensen, Page 183. This is reverse type of strategies. The strategy buys at market, if close price is higher than the previous close during 2 days and the meaning of 9-days Stochastic Slow Oscillator is lower than 50. The strategy sells at market, if close price is lower than the previous close price during 2 days and the meaning of 9-days Stochastic Fast Oscillator is higher than 50. Second strategy Linear Regression Intercept is one of the indicators calculated by using the Linear Regression technique. Linear regression indicates the value of the Y (generally the price) when the value of X (the time series) is 0. Linear Regression Intercept is used along with the Linear Regression Slope to create the Linear Regression Line. The Linear Regression Intercept along with the Slope creates the Regression line. WARNING: - For purpose educate only - This script to change bars colors.
Pineスクリプト™ ストラテジー
HPotterの投稿
3
trend Screener downtrendthis is in continuation with - previous trend screener i have published, In this code only downtrend screener is there ,This is type of custom screener I searched and made to screen bulk stocks any one can modify it, other may get help out of it. you can change or add new symbol in input section. in my code i have made defined and printed last close price when downtrend was true. 1. downtrend = ema (close,55)< ema (close,144) and ema (close,144)< ema (close,388) and ema (close,388)<ema(close,576) and close<ema(close,388) if the indicator is printing DOWNTREND=TRUE or UPTREND=TRUE then the corresponding stock is in currently in that trend out of the stocks listed in the code in one code only 40 (max) stocks can be called. to add more stocks I copied same code and changed the stocks in the code, now you can screen 80 stocks at a time. This code runs on each bar and checks if the stocks is in uptrend or down trend. you can customize this screener according to your requirement.
Pineスクリプト™ ストラテジー
TJalamの投稿
17
Double EMA CROSS Double EMA CROSS (DEC) Useful for identifying and receiving alerts about uptrends and downtrends. This script uses two Exponential Moving Averages (EMAs) to find price uptrends and downtrends. An Exponential Moving Average ( EMA ) is a type of moving average that places a greater weight and significance on the most recent data points. The script produces uptrend and downtrend signals based on crossovers and divergences between the two EMAs, the user will be able to spot a trend change (when the EMAs crossover) and to determine the strength of the current trend (when the EMAs diverge). It is also posible to get alerts for uptrends and downtrends on the web and mobile app with sound and pop-ups as well as via email. The optimal time to enter and exit the market can be concluded from this trend changes. The user can set their own EMAs, by default they are set to 25 and 75 periods for medium and long term respectively. When the medium term EMA crosses below the long term EMA the asset is in a downtrend and the price will decline, and when the medium term EMA crosses above the long term EMA the asset is in an uptrend and price will increase. This scripts plots the following indicators and signals on the chart to help the user to identify trends: 1.- Medium and long term EMAs as lines overlaid on the price chart. 2.- Up green triangles above bars when the price is on an uptrend and down red triangles below bars when the price is on a downtrend. 3.- Arrows with text to indicate the start of an uptrend or downtrend. The user can enable and disable the indicators and signals as well as set colors and shapes to their liking. This script also lets the user create alerts for uptrends and downtrends. To create a new alert using this script follow this instructions: 1.- Once you added this script to your chart, go to the alerts panel (right on web or bottom tool bar on the mobile app) and add a new alert (alarm clock icon with a plus sign). 2.- A modal window will open. On the “Condition” dropdown menu select “DEC”. 3.- On the next dropdown menu (right below the “Condition” one) you can select. 4.- Lastly you can set all the normal alert options and create the alert.
Pineスクリプト™ ストラテジー
EmreErturk_の投稿
1
Combo Backtest 123 Reversal & Laguerre-based RSI This is combo strategies for get a cumulative signal. First strategy This System was created from the Book "How I Tripled My Money In The Futures Market" by Ulf Jensen, Page 183. This is reverse type of strategies. The strategy buys at market, if close price is higher than the previous close during 2 days and the meaning of 9-days Stochastic Slow Oscillator is lower than 50. The strategy sells at market, if close price is lower than the previous close price during 2 days and the meaning of 9-days Stochastic Fast Oscillator is higher than 50. Second strategy This is RSI indicator which is more sesitive to price changes. It is based upon a modern math tool - Laguerre transform filter. With help of Laguerre filter one becomes able to create superior indicators using very short data lengths as well. The use of shorter data lengths means you can make the indicators more responsive to changes in the price. WARNING: - For purpose educate only - This script to change bars colors.
Pineスクリプト™ ストラテジー
HPotterの投稿
Volatility Bands Reversal Strategy [Long Only]This strategy based on existng indicator available on TV If finds the reversals for LONG entries ... I have modified the settings to back test it ... BUY ==== When the price touches lower band , and tries to close above lower band some signals are mixed up, you can research and look for a confirmation ... if the middle band is above EMA50 , you can simply follow the strategy BUY signal but if the middle band is EMA50 , wait for the price to close above middle band Sell / Close ========== wait for the sell signa OR close when price touches the upper band How do you want to close , you can chose in settings. Chnage these values and see the performance Please note , sell means just closing the existing LONG position , not short selling Stop Loss ========= Stop Loss is defaulted to 6% This is tested in 1HR, 2HR and 4 HRs chart for SPY and QQQ ETFS ... for long term investing style , 4 Hrs is the best time frme for this strategy Warning ======== It is not a financial advise , it is for educational purposes only. Please do your own research before taking any trading decission
Pineスクリプト™ ストラテジー
ediks123の投稿
2
Combo Backtest 123 Reversal & Signal To Noise This is combo strategies for get a cumulative signal. First strategy This System was created from the Book "How I Tripled My Money In The Futures Market" by Ulf Jensen, Page 183. This is reverse type of strategies. The strategy buys at market, if close price is higher than the previous close during 2 days and the meaning of 9-days Stochastic Slow Oscillator is lower than 50. The strategy sells at market, if close price is lower than the previous close price during 2 days and the meaning of 9-days Stochastic Fast Oscillator is higher than 50. Second strategy The signal-to-noise (S/N) ratio. And Simple Moving Average. WARNING: - For purpose educate only - This script to change bars colors.
Pineスクリプト™ ストラテジー
HPotterの投稿
4
Ichimoku Crypto LONG 3h ANY CRYPTO PairThis is a strategy which works with most of the crypto pairs on the 3H time frames. It beats easily on the long term buy and hold strategy. This strategy is made from the baseline from ichimoku together with ema 200 This is a long only strategy. THe condition is : our candle is above ema 200 and our ichimoku its telling we have a long trend. We exit on the opposite signal. If you have any questions private message me !
Pineスクリプト™ ストラテジー
SoftKill21の投稿
Strategy- Double Decker RSIThis Strategy was LIVE coded during a webinar conducted by the author on 16-Jan-21 titled Backtesting in Tradingview. The system is named " Double Decker RSI ". The rules of this strategy are: LONG - RSI(5)>70 and RSI(14)>50 -- EXIT: RSI(5)<55 SHORT - RSI(5)<40 and RSI(14)<50 -- EXIT: RSI(5)>45 Instrument - BANKNIFTY - 1 HR Chart The code is open source for you to edit and make changes as needed. For details on the strategy and webinar, you can refer to the website in signature of this strategy.
Pineスクリプト™ ストラテジー
Ankit_Quantの投稿